The Nd Fe B/Co multilayer films were prepared by magnetron sputtering. After that, the samples were annealed at 600 ℃ for 20 min. The surface morphology, phase structures and magnetic properties of Mo（50 nm）/[Nd F...The Nd Fe B/Co multilayer films were prepared by magnetron sputtering. After that, the samples were annealed at 600 ℃ for 20 min. The surface morphology, phase structures and magnetic properties of Mo（50 nm）/[Nd Fe B（100 nm）/Co（y）]×10/Mo（50 nm） thin films were researched by AFM, XRD and VSM, respectively. The results show that the films show stronger perpendicular magnetic anisotropy. When the thickness of Co layers is 10 nm, the coercivity Hc⊥ is the maximum, 295 k A/m. However, for y=10-20, the reduced remanence M/Ms of films has increased. When the thickness of Co layers is 20-30 nm, the Nd Fe B/Co multilayer films obtained more superior magnetic properties with M/Ms =0.95.展开更多
The magnetic measurements of the single crystal of Mn3 single-molecule magnet under high pressure at T=2 K have been performed.We find both the antiferromagnetic intermolecular coupling parameter J and the effective e...The magnetic measurements of the single crystal of Mn3 single-molecule magnet under high pressure at T=2 K have been performed.We find both the antiferromagnetic intermolecular coupling parameter J and the effective energy barrier to vary compared with the measurements at low pressure.The increase of|J|is estimated to be 12%at 0.7 GPa when compared with that of0 GPa,whereas the effective energy barrier becomes smaller with increasing pressure.Our results demonstrate that the intermolecular interaction of single-molecule magnet can be changed by pressure.Compared with the normal magnetic alloy,the effect of pressure on the magnetic properties of Mn3 is much more prominent,which implies that Mn3 may have great potential in magnetic multifunctional material.展开更多
Sr2Bi4Ti5O18(SBTi) single layered and Sr2Bi4Ti5O18 /Pb(Zr0.53Ti0.47)O3(SBTi/PZT) bilayered thin films have been prepared on Pt/TiO2/SiO2/Si substrates by pulsed-laser deposition(PLD).The related structural characteriz...Sr2Bi4Ti5O18(SBTi) single layered and Sr2Bi4Ti5O18 /Pb(Zr0.53Ti0.47)O3(SBTi/PZT) bilayered thin films have been prepared on Pt/TiO2/SiO2/Si substrates by pulsed-laser deposition(PLD).The related structural characterizations and electrical properties have been comparatively investigated.X-ray diffraction reveals that both films have crystallized into perovskite phases and scanning electron microscopy shows the sharp interfaces.Both films show well-saturated ferroelectric hysteresis loops,however,compared with the single layered SBTi films,the SBTi/PZT bilayered films have significantly increased remnant polarization(Pr) and decreased coercive field(Ec),with the applied field of 260 kV/cm.The measured Pr and Ec of SBTi and SBTi/PZT films were 7.9 C/cm 2,88.1 kV/cm and 13.0 C/cm 2,51.2 kV/cm,respectively.In addition,both films showed good fatigue-free characteristics,the switchable polarization decreased by 9% and 11% of the initial values after 2.2 10 9 switching cycles for the SBTi single layered films and the SBTi/PZT bilayered films,respectively.Our results may provide some guidelines for further optimization of multilayered ferroelectric thin films.展开更多
文摘The Nd Fe B/Co multilayer films were prepared by magnetron sputtering. After that, the samples were annealed at 600 ℃ for 20 min. The surface morphology, phase structures and magnetic properties of Mo（50 nm）/[Nd Fe B（100 nm）/Co（y）]×10/Mo（50 nm） thin films were researched by AFM, XRD and VSM, respectively. The results show that the films show stronger perpendicular magnetic anisotropy. When the thickness of Co layers is 10 nm, the coercivity Hc⊥ is the maximum, 295 k A/m. However, for y=10-20, the reduced remanence M/Ms of films has increased. When the thickness of Co layers is 20-30 nm, the Nd Fe B/Co multilayer films obtained more superior magnetic properties with M/Ms =0.95.
基金supported by the National Key Basic Research Program of China(Grant No.2011CB921702)the National Natural Science Foundation of China(Grant No.11104331)
文摘The magnetic measurements of the single crystal of Mn3 single-molecule magnet under high pressure at T=2 K have been performed.We find both the antiferromagnetic intermolecular coupling parameter J and the effective energy barrier to vary compared with the measurements at low pressure.The increase of|J|is estimated to be 12%at 0.7 GPa when compared with that of0 GPa,whereas the effective energy barrier becomes smaller with increasing pressure.Our results demonstrate that the intermolecular interaction of single-molecule magnet can be changed by pressure.Compared with the normal magnetic alloy,the effect of pressure on the magnetic properties of Mn3 is much more prominent,which implies that Mn3 may have great potential in magnetic multifunctional material.
基金supported by the National Natural Science Foundation(Grant Nos. 50805076 and 51275237)the National Natural Science Key Corporation Foundations (Grant No. 61161120323)Science Research Foundation at NUAA (Grant No. NS2012014)
文摘Sr2Bi4Ti5O18(SBTi) single layered and Sr2Bi4Ti5O18 /Pb(Zr0.53Ti0.47)O3(SBTi/PZT) bilayered thin films have been prepared on Pt/TiO2/SiO2/Si substrates by pulsed-laser deposition(PLD).The related structural characterizations and electrical properties have been comparatively investigated.X-ray diffraction reveals that both films have crystallized into perovskite phases and scanning electron microscopy shows the sharp interfaces.Both films show well-saturated ferroelectric hysteresis loops,however,compared with the single layered SBTi films,the SBTi/PZT bilayered films have significantly increased remnant polarization(Pr) and decreased coercive field(Ec),with the applied field of 260 kV/cm.The measured Pr and Ec of SBTi and SBTi/PZT films were 7.9 C/cm 2,88.1 kV/cm and 13.0 C/cm 2,51.2 kV/cm,respectively.In addition,both films showed good fatigue-free characteristics,the switchable polarization decreased by 9% and 11% of the initial values after 2.2 10 9 switching cycles for the SBTi single layered films and the SBTi/PZT bilayered films,respectively.Our results may provide some guidelines for further optimization of multilayered ferroelectric thin films.
