The effects of active control on the vehicle roll were studied. Based on the theory that distributing the greater roll stiffness to the rear axle can improve tracking trajectory capacity and increase maneuver stabilit...The effects of active control on the vehicle roll were studied. Based on the theory that distributing the greater roll stiffness to the rear axle can improve tracking trajectory capacity and increase maneuver stability, an eight degrees of freedom vehicle model was established and feedforward feedback control strategy was devised to control distribution of lateral load transfer on the front axle and the rear one. Simulation results showed that the proposed control strategy can improve comfort, maneuver stability and safety effectively.展开更多
A composite target seeker gyro with dual spectral range infrared rays and millimeter waves, and the associated control methodology are developed. The static pressure air floated ball bearing is used to sustain the ou...A composite target seeker gyro with dual spectral range infrared rays and millimeter waves, and the associated control methodology are developed. The static pressure air floated ball bearing is used to sustain the outer frame, the optical fiber and wave guide are used to transmit these two kinds of signals to the rear part of the gyro, and the stator coils are used to get non contact angular measurement. Composite guiding, scanning, tracing and controlling can be achieved, the maximum tracing angular velocity can be as high as 16(°)/s.展开更多
The control platform of the induction motor （IM） with low costs is developed by using DSP MC56F8013 with a good performance/price rtaio. The control algorithm for the speed sensorless IM is studied based on the stat...The control platform of the induction motor （IM） with low costs is developed by using DSP MC56F8013 with a good performance/price rtaio. The control algorithm for the speed sensorless IM is studied based on the stator flux orientation （SFO）. The algorithm structure is simple to be implemented and cannot be influenced by motor parameters, The improved stator flux estimation is used to compensate errors caused by the low pass filter （LPF）. A new speed regulator is designed to ensure the system working with the maximal torque in the transient state. The system simulation and the prototype experiment are made. Results show that the con- trol system has good dynamic and static performance.展开更多
A new decentralized adaptive control scheme is presented for linear time invariant systems with first order interconnections. The proposed control scheme with “proportional plus integral” terms is used to improve ...A new decentralized adaptive control scheme is presented for linear time invariant systems with first order interconnections. The proposed control scheme with “proportional plus integral” terms is used to improve the convergence rate and the ultimate bound of the tracking error. It is important to note that the adaptive scheme uses lower adaptive gains and smaller control inputs to avoid input saturation and oscillatory behavior. Simulation results are illustrated for controlling a dual inverted pendulum and a multivariable turbofan engine using the proposed adaptive scheme. These simulations validate out conclusions.展开更多
一个应用程序总是要由一簇其他程序跟从是不是太有些碍手碍脚了?Versatile Control System公司开发的VEXE 1.0版(＄99),让你把所有与Microsoft Windows 3.1兼容的可执行软件,以及它们的支持软件.VBX(定制控制),.DLL(动态链接库)和.HLP(W...一个应用程序总是要由一簇其他程序跟从是不是太有些碍手碍脚了?Versatile Control System公司开发的VEXE 1.0版(＄99),让你把所有与Microsoft Windows 3.1兼容的可执行软件,以及它们的支持软件.VBX(定制控制),.DLL(动态链接库)和.HLP(Windows帮助)文件等统统包装成一个执行文件。这样以来,安装和删除软件都变得容易了,对VBX的版本控制也有所帮助。 用了VEXE,嵌入的VBX就不会在另一个程序安装过程中被不兼容的版本所覆盖。但是,如果某个程序已先把一个VBX载入内存。展开更多
The new chaos control method presented in this paper is useful for taking advantage of chaos.Based on sliding mode control theory, this paper provides a switching manifold controlling strategy of chaoticsystem, and...The new chaos control method presented in this paper is useful for taking advantage of chaos.Based on sliding mode control theory, this paper provides a switching manifold controlling strategy of chaoticsystem, and also gives a kind of adaptive parameters estimated method to estimate the unknown systems' pa-rameters by which chaotic dynamical system can be synchronized. Taking the Lorenz system as example, and with the help of this controlling strategy, we can synchronize chaotic systems with unknown parameters and different initial conditions.展开更多
In order to realize the dynamic stable motion control for a leg-wheeled robot, this paper presents a layered control architecture. It is composed of three levels, i.e. the supervisor level, coordinator level and leg l...In order to realize the dynamic stable motion control for a leg-wheeled robot, this paper presents a layered control architecture. It is composed of three levels, i.e. the supervisor level, coordinator level and leg level. The supervisor level is for the task definition and planning, while the coordinator level does the dynamic stable control and the leg level executes the real-time control command. First, we build the efficient Newton-Euler dynamics equations of the robot. Then, the stability control is realized by properly distributing ground reaction forces applied by the legs. We also use Simplex method to optimize the ground reaction force distribution and verify the control method by experimental and numerical results.展开更多
An analytical tuning method was proposed for fuzzy PID controller used in Smith predictor in order to extend its application and improve its robustness. The fuzzy PID controller was expressed as a sliding mode control...An analytical tuning method was proposed for fuzzy PID controller used in Smith predictor in order to extend its application and improve its robustness. The fuzzy PID controller was expressed as a sliding mode control. Based on Lyapunov theory, Smith predictor was analyzed in time domain. The parameters of the fuzzy PID controller can be obtained using traditional linear control theory and sliding mode control theory. The simulation experiments were implemented. The simulation results show that the control performance, robustness and stability of the fuzzy PID controller are better than those of the PID controller in Smith predictor.展开更多
By decoupling control plane and data plane,Software-Defined Networking(SDN) approach simplifies network management and speeds up network innovations.These benefits have led not only to prototypes,but also real SDN dep...By decoupling control plane and data plane,Software-Defined Networking(SDN) approach simplifies network management and speeds up network innovations.These benefits have led not only to prototypes,but also real SDN deployments.For wide-area SDN deployments,multiple controllers are often required,and the placement of these controllers becomes a particularly important task in the SDN context.This paper studies the problem of placing controllers in SDNs,so as to maximize the reliability of SDN control networks.We present a novel metric,called expected percentage of control path loss,to characterize the reliability of SDN control networks.We formulate the reliability-aware control placement problem,prove its NP-hardness,and examine several placement algorithms that can solve this problem.Through extensive simulations using real topologies,we show how the number of controllers and their placement influence the reliability of SDN control networks.Besides,we also found that,through strategic controller placement,the reliability of SDN control networks can be significantly improved without introducing unacceptable switch-to-controller latencies.展开更多
This paper researches how to apply the advanced control technology of model predictive control （MPC） to the design of the dynamic positioning system （DPS） of a semi-submersible platform. First, a linear low-freque...This paper researches how to apply the advanced control technology of model predictive control （MPC） to the design of the dynamic positioning system （DPS） of a semi-submersible platform. First, a linear low-frequency motion model with three degrees of freedom was established in the context of a semi-submersible platform. Second, a model predictive controller was designed based on a model which took the constraints of the system into account. Third, simulation was carried out to demonstrate the feasibility of the controller. The results show that the model predictive controller has good performance and good at dealing with the constraints or the system.展开更多
The National Development and Reform Commission beefed up its efforts to promote the work of electricity price reform in 2004. It took measures in aspects of easing price contradictions, tentatively implementing discri...The National Development and Reform Commission beefed up its efforts to promote the work of electricity price reform in 2004. It took measures in aspects of easing price contradictions, tentatively implementing discriminated price and time-of-use price and issuing a policy on the linkage of coal and electricity prices and price administration. In 2005 the basic thinking of the Commission's electricity price reform is to actively advance the pilot work of price reform,carry out the reform of transmission and distribution price, enlarge the scope of pilot work of large consumer's direct purchase, simplify sales price structure and bring about the linkage of coal and electricity prices.展开更多
It is difficult to maintain the roadway around a fault because of the fractured surroundings, complex stress environment, and large and intense deformation in the mining process. Based on a tailgate of panel $2205 in ...It is difficult to maintain the roadway around a fault because of the fractured surroundings, complex stress environment, and large and intense deformation in the mining process. Based on a tailgate of panel $2205 in Tunliu colliery, in Shanxi province, China, we investigated the evolution of stress and displace- ment of rocks surrounding the roadway during the drivage and mining period using theoretical analysis, numerical simulation and field trial methods. We analyzed the deformation and failure mechanisms of the tailgate near a fault. The deformation of surrounding rock caused by unloading in the drivage period is large and asymmetric, the roadway convergence increases with activation of the fault and secondary fracture develops in the mining period. Therefore, we proposed a specific control technique of the road- way along a fault as follows： （1） High-strength yielding bolt not only supports the shallow rock to load- bearing structures, but also releases primary deformation energy by use of a pressure release device in order to achieve high resistance to the pressure retained： （2） Grouting of near-fault ribside after initial stabilization of the rock deformation is used to reinforce the broken rock, and to improve the integral load-bearing capacity ol~ the roadway. The research results were successfully applied to a field trial.展开更多
文摘The effects of active control on the vehicle roll were studied. Based on the theory that distributing the greater roll stiffness to the rear axle can improve tracking trajectory capacity and increase maneuver stability, an eight degrees of freedom vehicle model was established and feedforward feedback control strategy was devised to control distribution of lateral load transfer on the front axle and the rear one. Simulation results showed that the proposed control strategy can improve comfort, maneuver stability and safety effectively.
文摘A composite target seeker gyro with dual spectral range infrared rays and millimeter waves, and the associated control methodology are developed. The static pressure air floated ball bearing is used to sustain the outer frame, the optical fiber and wave guide are used to transmit these two kinds of signals to the rear part of the gyro, and the stator coils are used to get non contact angular measurement. Composite guiding, scanning, tracing and controlling can be achieved, the maximum tracing angular velocity can be as high as 16(°)/s.
文摘The control platform of the induction motor （IM） with low costs is developed by using DSP MC56F8013 with a good performance/price rtaio. The control algorithm for the speed sensorless IM is studied based on the stator flux orientation （SFO）. The algorithm structure is simple to be implemented and cannot be influenced by motor parameters, The improved stator flux estimation is used to compensate errors caused by the low pass filter （LPF）. A new speed regulator is designed to ensure the system working with the maximal torque in the transient state. The system simulation and the prototype experiment are made. Results show that the con- trol system has good dynamic and static performance.
文摘A new decentralized adaptive control scheme is presented for linear time invariant systems with first order interconnections. The proposed control scheme with “proportional plus integral” terms is used to improve the convergence rate and the ultimate bound of the tracking error. It is important to note that the adaptive scheme uses lower adaptive gains and smaller control inputs to avoid input saturation and oscillatory behavior. Simulation results are illustrated for controlling a dual inverted pendulum and a multivariable turbofan engine using the proposed adaptive scheme. These simulations validate out conclusions.
文摘一个应用程序总是要由一簇其他程序跟从是不是太有些碍手碍脚了?Versatile Control System公司开发的VEXE 1.0版(＄99),让你把所有与Microsoft Windows 3.1兼容的可执行软件,以及它们的支持软件.VBX(定制控制),.DLL(动态链接库)和.HLP(Windows帮助)文件等统统包装成一个执行文件。这样以来,安装和删除软件都变得容易了,对VBX的版本控制也有所帮助。 用了VEXE,嵌入的VBX就不会在另一个程序安装过程中被不兼容的版本所覆盖。但是,如果某个程序已先把一个VBX载入内存。
文摘The new chaos control method presented in this paper is useful for taking advantage of chaos.Based on sliding mode control theory, this paper provides a switching manifold controlling strategy of chaoticsystem, and also gives a kind of adaptive parameters estimated method to estimate the unknown systems' pa-rameters by which chaotic dynamical system can be synchronized. Taking the Lorenz system as example, and with the help of this controlling strategy, we can synchronize chaotic systems with unknown parameters and different initial conditions.
文摘In order to realize the dynamic stable motion control for a leg-wheeled robot, this paper presents a layered control architecture. It is composed of three levels, i.e. the supervisor level, coordinator level and leg level. The supervisor level is for the task definition and planning, while the coordinator level does the dynamic stable control and the leg level executes the real-time control command. First, we build the efficient Newton-Euler dynamics equations of the robot. Then, the stability control is realized by properly distributing ground reaction forces applied by the legs. We also use Simplex method to optimize the ground reaction force distribution and verify the control method by experimental and numerical results.
基金Project(70473068) supported by the National Natural Science Foundation of ChinaProject(05JZD00024) supported by the Major Subject of Ministry of Education, China
文摘An analytical tuning method was proposed for fuzzy PID controller used in Smith predictor in order to extend its application and improve its robustness. The fuzzy PID controller was expressed as a sliding mode control. Based on Lyapunov theory, Smith predictor was analyzed in time domain. The parameters of the fuzzy PID controller can be obtained using traditional linear control theory and sliding mode control theory. The simulation experiments were implemented. The simulation results show that the control performance, robustness and stability of the fuzzy PID controller are better than those of the PID controller in Smith predictor.
基金supported in part by the National High Technology Research and Development Program(863 Program)of China under Grant No.2011AA01A101the National High Technology Research and Development Program(863 Program)of China under Grant No.2013AA01330the National High Technology Research and Development Program(863 Program)of China under Grant No.2013AA013303
文摘By decoupling control plane and data plane,Software-Defined Networking(SDN) approach simplifies network management and speeds up network innovations.These benefits have led not only to prototypes,but also real SDN deployments.For wide-area SDN deployments,multiple controllers are often required,and the placement of these controllers becomes a particularly important task in the SDN context.This paper studies the problem of placing controllers in SDNs,so as to maximize the reliability of SDN control networks.We present a novel metric,called expected percentage of control path loss,to characterize the reliability of SDN control networks.We formulate the reliability-aware control placement problem,prove its NP-hardness,and examine several placement algorithms that can solve this problem.Through extensive simulations using real topologies,we show how the number of controllers and their placement influence the reliability of SDN control networks.Besides,we also found that,through strategic controller placement,the reliability of SDN control networks can be significantly improved without introducing unacceptable switch-to-controller latencies.
基金Supported by the Basic Research Foundation of Central University(HEUCFZ1003)
文摘This paper researches how to apply the advanced control technology of model predictive control （MPC） to the design of the dynamic positioning system （DPS） of a semi-submersible platform. First, a linear low-frequency motion model with three degrees of freedom was established in the context of a semi-submersible platform. Second, a model predictive controller was designed based on a model which took the constraints of the system into account. Third, simulation was carried out to demonstrate the feasibility of the controller. The results show that the model predictive controller has good performance and good at dealing with the constraints or the system.
文摘The National Development and Reform Commission beefed up its efforts to promote the work of electricity price reform in 2004. It took measures in aspects of easing price contradictions, tentatively implementing discriminated price and time-of-use price and issuing a policy on the linkage of coal and electricity prices and price administration. In 2005 the basic thinking of the Commission's electricity price reform is to actively advance the pilot work of price reform,carry out the reform of transmission and distribution price, enlarge the scope of pilot work of large consumer's direct purchase, simplify sales price structure and bring about the linkage of coal and electricity prices.
基金provided by the National Natural Science Foundation of China (No. 51174195)the State Key Laboratory of Coal Resources and Mine Safety(No. SKLCRSM08X04)+1 种基金the Science Foundation for Youth of China University of Mining &Technology (No. 2008A02)supported by China Scholarship Council for High-Level University Program (No.CSC[2010] 3006)
文摘It is difficult to maintain the roadway around a fault because of the fractured surroundings, complex stress environment, and large and intense deformation in the mining process. Based on a tailgate of panel $2205 in Tunliu colliery, in Shanxi province, China, we investigated the evolution of stress and displace- ment of rocks surrounding the roadway during the drivage and mining period using theoretical analysis, numerical simulation and field trial methods. We analyzed the deformation and failure mechanisms of the tailgate near a fault. The deformation of surrounding rock caused by unloading in the drivage period is large and asymmetric, the roadway convergence increases with activation of the fault and secondary fracture develops in the mining period. Therefore, we proposed a specific control technique of the road- way along a fault as follows： （1） High-strength yielding bolt not only supports the shallow rock to load- bearing structures, but also releases primary deformation energy by use of a pressure release device in order to achieve high resistance to the pressure retained： （2） Grouting of near-fault ribside after initial stabilization of the rock deformation is used to reinforce the broken rock, and to improve the integral load-bearing capacity ol~ the roadway. The research results were successfully applied to a field trial.
