Most edge-detection methods rely on calculating gradient derivatives of the potential field, a process that is easily affected by noise and is therefore of low stability. We propose a new edge-detection method named c...Most edge-detection methods rely on calculating gradient derivatives of the potential field, a process that is easily affected by noise and is therefore of low stability. We propose a new edge-detection method named correlation coefficient of multidirectional standard deviations（CCMS） that is solely based on statistics. First, we prove the reliability of the proposed method using a single model and then a combination of models. The proposed method is evaluated by comparing the results with those obtained by other edge-detection methods. The CCMS method offers outstanding recognition, retains the sharpness of details, and has low sensitivity to noise. We also applied the CCMS method to Bouguer anomaly data of a potash deposit in Laos. The applicability of the CCMS method is shown by comparing the inferred tectonic framework to that inferred from remote sensing（RS） data.展开更多
Objective: To study the pharmacokinetics of 20(R)-Ginsenoside Rg3 in the human body. Methods: High-performance liquid chromatography-ultraviolet detection method was used in this study. Results: The pharmacokinetics o...Objective: To study the pharmacokinetics of 20(R)-Ginsenoside Rg3 in the human body. Methods: High-performance liquid chromatography-ultraviolet detection method was used in this study. Results: The pharmacokinetics of Ginsenoside Rg3 in 14 healthy volunteers were investigated. After a single oral dose of 3.2 mg.g-1 Ginsenoside Rg3 in 8 male volunteers, the plasma concentration-time course fitted in well with a two-compartment open model, with the following pharmacokinetic parameters: Tmax 0.660.10 h, Cmax 166 ngmL-1, T1/2a 0.460.12 h, T1/2b 4.91.1 h, T1/2(Ka) 0.280.04 h, AUC0-∞ 7726 ngmL-1h, respectively. No kinetic analysis was made after an oral dose of 0.8 mg.g-1 Rg3 in other 6 volunteers because of the low concentration, but there was a good correlation between Cmax and dosage of the two groups. Conclusion: The absorption of Rg3 was rapid in the human body, and its elimination was rapid too after oral administration of Ginsenoside Rg3. The pharmacokinetic results shows that it exhibited the first-order kinetic characteristics.展开更多
[Objective] This study aimed to establish a method for quantitative detection of mRNA transcriptional level of SS2 adhesive related-factors of Streptococcus suis serotype 2 （SS2） by fluorescent quantitative PCR. []V...[Objective] This study aimed to establish a method for quantitative detection of mRNA transcriptional level of SS2 adhesive related-factors of Streptococcus suis serotype 2 （SS2） by fluorescent quantitative PCR. []Vlethod] The gene fragments en- coding SS2 adhesive related-factors MRP, FBPS and CPS2J and a housekeeping gene aroA were amplified by reverse transcription PCR from the total RNA of SS2, cloned, and sequenced. The recombinant plasmids containing the target genes were constructed, and used as templates in Real-time PCR. [Result] Dynamic curves, stan- dard curves and melting curves of the adhesive related-factors and aroA were ob- tained by the optimized Real-time PCR system. The standard curves showed a good linear relationship between template copy number and circulation number, and the correlation coefficients （FF） of the standard curves were over 0.995. Also, these as- says were highly specific a^d there was single specific melting peak for every gene. Moreover, the assays were highly sensitive and had a detection limit of 1.0×102 copies in 1 μl of initial templates. Finally, it was highly repeatable and had a coeffi- cient of variation less than 2% for intra-assay. [Conclusion] This study will provide a way to reveal the adhesion mechanism of SS2 to different host cells at molecular level.展开更多
Swelling and shrinkage due to moisture-change is one of the characteristics of the expansive soil,which is similar to the behavior of most materials under thermal effect,If the deformation is restricted,stress in expa...Swelling and shrinkage due to moisture-change is one of the characteristics of the expansive soil,which is similar to the behavior of most materials under thermal effect,If the deformation is restricted,stress in expansive soil is caused by the swell-shrinking.The stress is defined as "moisture-change stress" and is adopted to analyze swell-shrinkage deformation based on the elasticity mechanics theory.The state when the total stress becomes equal to the soil tensile strength is considered as the cracking criterion as moisture-change increases.Then,the initial cracking mechanism due to evaporation is revealed as follows:Different rates of moisture loss at different depths result in greater shrinkage deformation on the surface while there is smaller shrinkage deformation at the underlayer in expansive soil;cracks will grow when the nonuniform shrinkage deformation increases to a certain degree.A theoretical model is established,which may be used to calculate the stress caused by moisture-change.The depth of initial cracks growing is predicted by the proposed model in expansive soil,A series of laboratory tests are carried out by exposing expansive soil samples with different moisture-changes.The process of crack propagation is investigated by resistivity method.The test results show good consistency with the predicted results by the proposed theoretical model.展开更多
In order to minimize the harm caused by the instability of a planing craft, a motion prediction model is essential. This paper analyzed the feasibility of using an MGM（1,N） model in grey system theory to predict pla...In order to minimize the harm caused by the instability of a planing craft, a motion prediction model is essential. This paper analyzed the feasibility of using an MGM（1,N） model in grey system theory to predict planing craft motion and carried out the numerical simulation experiment. According to the characteristics of planing craft motion, a recurrence formula was proposed of the parameter matrix of an MGMfl,N） model. Using this formula, data can be updated in real-time without increasing computational complexity significantly. The results of numerical simulation show that using an MGM（1,N） model to predict planing motion is feasible and useful for prediction. So the method proposed in this study can reflect the planing craft motion mechanism successfully, and has rational and effective functions of forecasting and analyzing trends.展开更多
Aimed at the CMS laser scanning theory and characteristic, a combined actual situation of stope N4-5 of Fankou Lead-Zinc Mine and complementary monitoring of the stope were carried out by carefully choos- ing two meas...Aimed at the CMS laser scanning theory and characteristic, a combined actual situation of stope N4-5 of Fankou Lead-Zinc Mine and complementary monitoring of the stope were carried out by carefully choos- ing two measuring points. The cavity 3D visible model was created by large-scale mining industry soft- ware Surpac after changing the measured data. The stope mine design model, bottom structural model and backfill model of the south and north sides of the stope N4-5 were established according to the stope design data. On this basis, the stope block model was established, and then block attribute was estimated. The amount the ore remains, mullock, backfill and total mined ore were calculated through the solid model restrains. Finally, the stope mining dilution rate and loss rate reached 8.2% and 1.47%, respectively. The practice indicates that the mining index visible calculation method based on cavity 3D monitoring and stope block modeling can make up the deficiency of adopting the solid model to directly carry out the Boolean operation, The stope mining indexes obtained by this method are accurate and reliable, and can be used to guide the actual nroduction management and estimate the mining aualitv.展开更多
This paper describes an orthogonal experiment on the effect of water/cement ratio,water consumption per cubic meter,curing time,and type of sand on the response＂resistance to chloride ion penetration＂.A sea-sand con...This paper describes an orthogonal experiment on the effect of water/cement ratio,water consumption per cubic meter,curing time,and type of sand on the response＂resistance to chloride ion penetration＂.A sea-sand containing concrete was used for the trials.An analysis of chloride ion diffusion coefficients at different factor levels was performed.A predictive model of chloride ion diffusion in concrete is developed through regression analysis.The experimental results show that when the water/cement ratio varies from 0.45 to 0.60,and the water consumption per cubic meter varies from 185 to 215 kg,and the curing time varies from 30 to 180 d then the size of the effects fall in the order（most significant first）： curing time,type of sand,water consumption per cubic meter,and water/cement ratio.Chloride ion penetration is reduced,and better durability of the concrete is observed,with longer curing times,less water consumption per cubic meter,and a smaller water/cement ratio.展开更多
High Frequency(HF) radar current data is assimilated into a shelf sea circulation model based on optimal interpolation(OI) method. The purpose of this work is to develop a real-time computationally highly efficient as...High Frequency(HF) radar current data is assimilated into a shelf sea circulation model based on optimal interpolation(OI) method. The purpose of this work is to develop a real-time computationally highly efficient assimilation method to improve the forecast of shelf current. Since the true state of the ocean is not known, the specification of background error covariance is arduous. Usually, it is assumed or calculated from an ensemble of model states and is kept in constant. In our method, the spatial covariances of model forecast errors are derived from differences between the adjacent model forecast fields, which serve as the forecast tendencies. The assumption behind this is that forecast errors can resemble forecast tendencies, since variances are large when fields change quickly and small when fields change slowly. The implementation of HF radar data assimilation is found to yield good information for analyses. After assimilation, the root-mean-square error of model decreases significantly. Besides, three assimilation runs with variational observation density are implemented. The comparison of them indicates that the pattern described by observations is much more important than the amount of observations. It is more useful to expand the scope of observations than to increase the spatial interval. From our tests, the spatial interval of observation can be 5 times bigger than that of model grid.展开更多
The important effects of snow cover to ground thermal decades. In the most of previous research, the effects were usually regime has received much attention of scholars during the past few evaluated through the numeri...The important effects of snow cover to ground thermal decades. In the most of previous research, the effects were usually regime has received much attention of scholars during the past few evaluated through the numerical models and many important results are found. However, less examples and insufficient data based on field measurements are available to show natural cases. In the present work, a typical case study in Mohe and Beijicun meteorological stations, which both are located in the most northern tip of China, is given to show the effects of snow cover on the ground thermal regime. The spatial （the ground profile） and time series analysis in the extremely snowy winter of 2012-2013 in Heilongjiang Province are also performed by contrast with those in the winter of 2011-2012 based on the measured data collected by 63 meteorological stations, Our results illustrate the positive （warmer） effect of snow cover on the ground temperature （GT） on the daily basis, the highest difference between GT and daily mean air temperature （DGAT） is as high as 32.35℃. Moreover, by the lag time analysis method it is found that the response time of GT from 0 cm to 20 cm ground depth to the alternate change of snow depth has 10 days lag, while at 40 cm depth the response of DGAT is not significant. This result is different from the previous research by modeling, in which the resnonse denth of ground to the alteration of snow depth is far more than 40 cm.展开更多
A computational mass transfer model is proposed for predicting the concentration profile and Murphree efficiency of sieve tray distillation column. The proposed model is based on using modified c＇2 -εc＇ two equatio...A computational mass transfer model is proposed for predicting the concentration profile and Murphree efficiency of sieve tray distillation column. The proposed model is based on using modified c＇2 -εc＇ two equations formulation for closing the differential turbulent mass transfer equation with improvement by considering the vapor injected from the sieve hole to be three dimensional. The predicted concentration distributions by using proposed model were checked by experimental work conducted on a sieve tray simulator of 1.2 meters in diameter for desorbing the dissolved oxygen in the feed water by blowing air. The model predictions were confirmed by the experimental measurement. The validation of the proposed model was further tested by comparing the simulated result with the performance of an industrial scale sieve tray distillation column reported by Kunesh et al. for the stripping of toluene from its water solution. The predicted outlet concentration of each tray and the Murphree tray efficiencies under different operating conditions were in agreement with the published data. The simulated turbulent mass transfer diffusivity on each tray was within the range of the experimental result in the same sieve column reported by Cai et al. In addition, the prediction of the influence of sieve tray structure on the tray efficiency by using the proposed model was demonstrated.展开更多
Submerged arc welding （SAW） is advantageous for joining high thickness materials in large structure due to high material deposition rate. The non-uniform heating and cooling generates the thermal stresses and subseq...Submerged arc welding （SAW） is advantageous for joining high thickness materials in large structure due to high material deposition rate. The non-uniform heating and cooling generates the thermal stresses and subsequently the residual stresses and distortion. The longitudinal and transverse residual stresses and angular distortion are generally measured in large panel structure of submerged arc welded fillet joints. Hence, the objective of this present work is to quantify the amount of residual stress and distortion in and around the weld joint due to positioning of stiffeners tack. The tacking sequence influences the level of residual stress and proper controlling of tacking sequences is required to minimize the stress. In present study, an elasto-plastic material behavior is considered to develop the thermo mechanical model which predicts the residual stress and angular distortion with varying tacking sequences. The simulated result reveals that the tacking sequence heavily influences the residual stress and deformation pattern of the single sided fillet joint. The finite element based numerical model is calibrated by comparing the experimental data from published literature. Henceforth, the angular distortions are measured from an in-house developed experimental set-up. A fair agreement between the predicted and experimental results indicates the robustness of the developed numerical model. However, the most significant conclusion from present study states that tack weld position should be placed opposite to the fillet weld side to minimize the residual stress.展开更多
In order to study the response of collision speed caused by the large bus to new flexible barrier,in this paper,with the large bus as the carrier,the full-scale impact tests between flexible barrier and vehicle with t...In order to study the response of collision speed caused by the large bus to new flexible barrier,in this paper,with the large bus as the carrier,the full-scale impact tests between flexible barrier and vehicle with the impact velocities of 40 km/h and 60 km/h were carried out separately,following the procedures of the test preparation,test processing,data acquisition, etc,which were based on the test platform of the Large Structure Crash Testing Laboratory of Changsha University of Science and Technology. The important test results which contain the damage of vehicles and barrier,the moving locus of vehicle,the occupant risk index,the maximum dynamic deformation, etc,were obtained through the analysis under the different collision speeds. These provide the necessary reference basis for the further research on the structure topology optimization and improve the comprehensive constraint performance to the flexible barrier.展开更多
Operators suffer much diffieulty in manipulating miero-size objects without the assistance of friendly interfaces due to the scaling effects in micro worht. The paper presented a general framework for mieromanipulatio...Operators suffer much diffieulty in manipulating miero-size objects without the assistance of friendly interfaces due to the scaling effects in micro worht. The paper presented a general framework for mieromanipulation robot hased on virtual reality technology. With the framework we brought forward a FDH （Fixed Direction Hulls） based hounding box method to handle the eollision ,teteetion of the peg-in-hole mieroassembly. The eollision response model for the collision between micro needle and hole was presented. The virtual three and corresponding displacement were calculated with the model of bending deformation and pressing ,teformation. Experiments verify the validity of collision response model.展开更多
A novel data acquisition system was successfully integrated on-board the Massey Ferguson 3,000 series agricultural tractors for measuring tractor-implement performance. A commercial load cell was incorporated into the...A novel data acquisition system was successfully integrated on-board the Massey Ferguson 3,000 series agricultural tractors for measuring tractor-implement performance. A commercial load cell was incorporated into the existing system for the needed tractor-implement performance, measurements. This system is capable of measuring, displaying and recording, in real-time, the tractor＇s theoretical travel speed, the actual travel speed, the engine speed, the fuel consumption rate, and the drawbar pull. Static calibration tests on various associated sensors for the required measurements show excellent linearity with correlation coefficients that are close to 1. The developed system was extensively and successfully field demonstrated for tractor-implement performance with offset disc harrows on dry, undisturbed loamy soils. Under these conditions, a ratio of tractor power to implement width is suggested. The data also show the existence of a linear relationship between fuel consumption per hectare and specific draught, for the 4 to 9 kN m^-1 range, which suggests the possibility of extending the American Society of Agricultural and Biological Engineers model of draught prediction to forecast fuel consumption. The configuration of the tractor-harrow combination, based on the measurement of the draught required under operational conditions, provides the manufacturers with a reliable indication of the recommended power required for each harrow model. With this type of information farmers can make decisions regarding selection of a suitable tractor-implement combination for their farms. As a consequence, there is improved tractor-harrow productivity and field efficiency.展开更多
The main purpose of this paper was to set up a functioning numerical model of data rack verified by an experimental measurement. The numerical model will serve for the flow simulation inside the data rack. For the aim...The main purpose of this paper was to set up a functioning numerical model of data rack verified by an experimental measurement. The numerical model will serve for the flow simulation inside the data rack. For the aim of experimental verification of the server model, a PIV （particle image velocimetry） method was used. The server model was projected based on the original Rack Workstation Dell Precision 17,5400 （2U rack space）. The flow rate in each channel was implemented with the help of pressure loss, which was set up so that the server flow rate corresponded with the measured values. The verification of the correct functioning of the numerical model of the server was carded out together with verifying the numerical model of a small data rack. The experiment was compared with the numerical model for the case of data rack （12U rack space） fitted with two 2U rack workstations Dell Precision R5400, on which the simulation of several phases of the entire data rack with given configuration was carried out.展开更多
Seismic attributes, such as P- and S-wave velocity, Poisson＇s ratio, and acoustic impedances, all generally can be used for distinguishing different rock types. The nonuniqueness can be largely reduced using Lame imp...Seismic attributes, such as P- and S-wave velocity, Poisson＇s ratio, and acoustic impedances, all generally can be used for distinguishing different rock types. The nonuniqueness can be largely reduced using Lame impedances instead of acoustic impedances as additional constraints. We have followed this method to constitute a petrologic composition model of the upper crust in the Bohai Bay basin, China. We briefly review the seismic parameters used for discrimination of rock types and focus our attention on the sensitivity of different combinations of parameters to determine the composition of materials. Corrections for pressure and temperature are performed in order to compare elastic wave velocities and densities measured at room temperature and surface pressure in laboratory with those for representative rock parameters. In a second step, we find the rock classes in the tested area by contrasting known data to laboratory measurements on a variety of rock samples extracted in the area. The basic field data are P-wave velocity values collected along a seismic profile conducted in the Bozhong Depression. The different rock types belonging to a particular rock class are finally constrained by the seismic velocities, Poisson＇s ratio, density, acoustic impedance, and Lame imoedance related to the topmost 10 km of the Bohai Bav crust.展开更多
Information on the spatial and temporal patterns of surface carbon flux is crucial to understanding of source/sink mechanisms and projection of future atmospheric CO2 concentrations and climate. This study presents th...Information on the spatial and temporal patterns of surface carbon flux is crucial to understanding of source/sink mechanisms and projection of future atmospheric CO2 concentrations and climate. This study presents the construction and implementation of a terrestrial carbon cycle data assimilation system based on a dynamic vegetation and terrestrial carbon model Vegetation-Global-Atmosphere-Soil(VEGAS) with an advanced assimilation algorithm, the local ensemble transform Kalman filter(LETKF, hereafter LETKF-VEGAS). An observing system simulation experiment(OSSE) framework was designed to evaluate the reliability of this system, and numerical experiments conducted by the OSSE using leaf area index(LAI) observations suggest that the LETKF-VEGAS can improve the estimations of leaf carbon pool and LAI significantly, with reduced root mean square errors and increased correlation coefficients with true values, as compared to a control run without assimilation. Furthermore, the LETKF-VEGAS has the potential to provide more accurate estimations of the net primary productivity(NPP) and carbon flux to atmosphere(CFta).展开更多
An optical closure study on bio-optical relationships was carried out using radiative transfer model matrix operator method developed by Freie Universitat Berlin. As a case study, the optical closure of bio-optical re...An optical closure study on bio-optical relationships was carried out using radiative transfer model matrix operator method developed by Freie Universitat Berlin. As a case study, the optical closure of bio-optical relationships empirically parameterized with in situ data for the East China Sea was examined. Remote-sensing reflectance （Rrs） was computed from the inherent optical properties predicted by these biooptical relationships and compared with published in situ data. It was found that the simulated Rrs was overestimated for turbid water. To achieve optical closure, bio-optical relationships for absorption and scattering coefficients for suspended particulate matter were adjusted. Furthermore, the results show that the Fournier and Forand phase functions obtained from the adjusted relationships perform better than the Petzold phase function. Therefore, before bio-optical relationships are used for a local sea area, the optical closure should be examined.展开更多
基金supported by the National Hi-Tech Research and Development Program of China(863 Program)(No.2006AA06Z107)the National Natural Science Foundation of China(No.40930314)
文摘Most edge-detection methods rely on calculating gradient derivatives of the potential field, a process that is easily affected by noise and is therefore of low stability. We propose a new edge-detection method named correlation coefficient of multidirectional standard deviations（CCMS） that is solely based on statistics. First, we prove the reliability of the proposed method using a single model and then a combination of models. The proposed method is evaluated by comparing the results with those obtained by other edge-detection methods. The CCMS method offers outstanding recognition, retains the sharpness of details, and has low sensitivity to noise. We also applied the CCMS method to Bouguer anomaly data of a potash deposit in Laos. The applicability of the CCMS method is shown by comparing the inferred tectonic framework to that inferred from remote sensing（RS） data.
文摘Objective: To study the pharmacokinetics of 20(R)-Ginsenoside Rg3 in the human body. Methods: High-performance liquid chromatography-ultraviolet detection method was used in this study. Results: The pharmacokinetics of Ginsenoside Rg3 in 14 healthy volunteers were investigated. After a single oral dose of 3.2 mg.g-1 Ginsenoside Rg3 in 8 male volunteers, the plasma concentration-time course fitted in well with a two-compartment open model, with the following pharmacokinetic parameters: Tmax 0.660.10 h, Cmax 166 ngmL-1, T1/2a 0.460.12 h, T1/2b 4.91.1 h, T1/2(Ka) 0.280.04 h, AUC0-∞ 7726 ngmL-1h, respectively. No kinetic analysis was made after an oral dose of 0.8 mg.g-1 Rg3 in other 6 volunteers because of the low concentration, but there was a good correlation between Cmax and dosage of the two groups. Conclusion: The absorption of Rg3 was rapid in the human body, and its elimination was rapid too after oral administration of Ginsenoside Rg3. The pharmacokinetic results shows that it exhibited the first-order kinetic characteristics.
基金Supported by National Natural Science Foundation of China(31072155)Natural Science Foundation of Jiangsu Province(BK2010068)+1 种基金Fund for Independent Innovation of Agricultural Science in Jiangsu Province[CX(11)2060]Special Fund for Agroscientific Research in the Public Interest(201303041)~~
文摘[Objective] This study aimed to establish a method for quantitative detection of mRNA transcriptional level of SS2 adhesive related-factors of Streptococcus suis serotype 2 （SS2） by fluorescent quantitative PCR. []Vlethod] The gene fragments en- coding SS2 adhesive related-factors MRP, FBPS and CPS2J and a housekeeping gene aroA were amplified by reverse transcription PCR from the total RNA of SS2, cloned, and sequenced. The recombinant plasmids containing the target genes were constructed, and used as templates in Real-time PCR. [Result] Dynamic curves, stan- dard curves and melting curves of the adhesive related-factors and aroA were ob- tained by the optimized Real-time PCR system. The standard curves showed a good linear relationship between template copy number and circulation number, and the correlation coefficients （FF） of the standard curves were over 0.995. Also, these as- says were highly specific a^d there was single specific melting peak for every gene. Moreover, the assays were highly sensitive and had a detection limit of 1.0×102 copies in 1 μl of initial templates. Finally, it was highly repeatable and had a coeffi- cient of variation less than 2% for intra-assay. [Conclusion] This study will provide a way to reveal the adhesion mechanism of SS2 to different host cells at molecular level.
基金Project(2006BAB04A10) supported by the National Science and Technology Pillar Program during the 11th Five Year Plan of ChinaProject(51008117) supported by the National Natural Science Foundation of China
文摘Swelling and shrinkage due to moisture-change is one of the characteristics of the expansive soil,which is similar to the behavior of most materials under thermal effect,If the deformation is restricted,stress in expansive soil is caused by the swell-shrinking.The stress is defined as "moisture-change stress" and is adopted to analyze swell-shrinkage deformation based on the elasticity mechanics theory.The state when the total stress becomes equal to the soil tensile strength is considered as the cracking criterion as moisture-change increases.Then,the initial cracking mechanism due to evaporation is revealed as follows:Different rates of moisture loss at different depths result in greater shrinkage deformation on the surface while there is smaller shrinkage deformation at the underlayer in expansive soil;cracks will grow when the nonuniform shrinkage deformation increases to a certain degree.A theoretical model is established,which may be used to calculate the stress caused by moisture-change.The depth of initial cracks growing is predicted by the proposed model in expansive soil,A series of laboratory tests are carried out by exposing expansive soil samples with different moisture-changes.The process of crack propagation is investigated by resistivity method.The test results show good consistency with the predicted results by the proposed theoretical model.
基金Supported by the Foundation of State Key Laboratory of Autonomous Underwater Vehicle, Harbin Engineering Universitythe Fundamental Research Funds for the Central Universities (HEUCFL20101113)
文摘In order to minimize the harm caused by the instability of a planing craft, a motion prediction model is essential. This paper analyzed the feasibility of using an MGM（1,N） model in grey system theory to predict planing craft motion and carried out the numerical simulation experiment. According to the characteristics of planing craft motion, a recurrence formula was proposed of the parameter matrix of an MGMfl,N） model. Using this formula, data can be updated in real-time without increasing computational complexity significantly. The results of numerical simulation show that using an MGM（1,N） model to predict planing motion is feasible and useful for prediction. So the method proposed in this study can reflect the planing craft motion mechanism successfully, and has rational and effective functions of forecasting and analyzing trends.
基金Financial support for this work was provided by the Frontier Research Plan Key Program of Central South University (No.2010QZZ001)the Open Projects of State Key Laboratory of CoalResources and Mine Safety, CUMT (No. 11KF02)
文摘Aimed at the CMS laser scanning theory and characteristic, a combined actual situation of stope N4-5 of Fankou Lead-Zinc Mine and complementary monitoring of the stope were carried out by carefully choos- ing two measuring points. The cavity 3D visible model was created by large-scale mining industry soft- ware Surpac after changing the measured data. The stope mine design model, bottom structural model and backfill model of the south and north sides of the stope N4-5 were established according to the stope design data. On this basis, the stope block model was established, and then block attribute was estimated. The amount the ore remains, mullock, backfill and total mined ore were calculated through the solid model restrains. Finally, the stope mining dilution rate and loss rate reached 8.2% and 1.47%, respectively. The practice indicates that the mining index visible calculation method based on cavity 3D monitoring and stope block modeling can make up the deficiency of adopting the solid model to directly carry out the Boolean operation, The stope mining indexes obtained by this method are accurate and reliable, and can be used to guide the actual nroduction management and estimate the mining aualitv.
基金This project owes gratitude to the Science and Technology Project (No.2008-K4-27) of Ministry of Housing and Urban-Rural Developmentthe"Tralented Personnel Nurturing in Six Fundamental Fields"Project of Jiangsu Province and"Qing-Lan Project"+2 种基金the Science and Technology Project of Jiangsu Bureau of Construction and Supervision (No.JG2007-13)the Science and Technology Planning Project of Xuzhou City(No.XJ08077)the Scientific Research Project of Xuzhou Institute of Technology(No.XKY2008225).
文摘This paper describes an orthogonal experiment on the effect of water/cement ratio,water consumption per cubic meter,curing time,and type of sand on the response＂resistance to chloride ion penetration＂.A sea-sand containing concrete was used for the trials.An analysis of chloride ion diffusion coefficients at different factor levels was performed.A predictive model of chloride ion diffusion in concrete is developed through regression analysis.The experimental results show that when the water/cement ratio varies from 0.45 to 0.60,and the water consumption per cubic meter varies from 185 to 215 kg,and the curing time varies from 30 to 180 d then the size of the effects fall in the order（most significant first）： curing time,type of sand,water consumption per cubic meter,and water/cement ratio.Chloride ion penetration is reduced,and better durability of the concrete is observed,with longer curing times,less water consumption per cubic meter,and a smaller water/cement ratio.
基金supported by the State Oceanic Administration Young Marine Science Foundation (No. 2013201)the Shandong Provincial Key Laboratory of Marine Ecology and Environment & Disaster Prevention and Mitigation Foundation (No. 2012007)+1 种基金the Marine Public Foundation (No. 201005018)the North China Sea Branch Scientific Foundation (No. 2014B10)
文摘High Frequency(HF) radar current data is assimilated into a shelf sea circulation model based on optimal interpolation(OI) method. The purpose of this work is to develop a real-time computationally highly efficient assimilation method to improve the forecast of shelf current. Since the true state of the ocean is not known, the specification of background error covariance is arduous. Usually, it is assumed or calculated from an ensemble of model states and is kept in constant. In our method, the spatial covariances of model forecast errors are derived from differences between the adjacent model forecast fields, which serve as the forecast tendencies. The assumption behind this is that forecast errors can resemble forecast tendencies, since variances are large when fields change quickly and small when fields change slowly. The implementation of HF radar data assimilation is found to yield good information for analyses. After assimilation, the root-mean-square error of model decreases significantly. Besides, three assimilation runs with variational observation density are implemented. The comparison of them indicates that the pattern described by observations is much more important than the amount of observations. It is more useful to expand the scope of observations than to increase the spatial interval. From our tests, the spatial interval of observation can be 5 times bigger than that of model grid.
基金Under the auspices of National Natural Science Foundation of China(No.41471289,41301368)Natural Science Foundation of Jilin Province(No.20140101158JC)Foundation of State Key Laboratory of Remote Sensing Science(No.OFSLRSS201517)
文摘The important effects of snow cover to ground thermal decades. In the most of previous research, the effects were usually regime has received much attention of scholars during the past few evaluated through the numerical models and many important results are found. However, less examples and insufficient data based on field measurements are available to show natural cases. In the present work, a typical case study in Mohe and Beijicun meteorological stations, which both are located in the most northern tip of China, is given to show the effects of snow cover on the ground thermal regime. The spatial （the ground profile） and time series analysis in the extremely snowy winter of 2012-2013 in Heilongjiang Province are also performed by contrast with those in the winter of 2011-2012 based on the measured data collected by 63 meteorological stations, Our results illustrate the positive （warmer） effect of snow cover on the ground temperature （GT） on the daily basis, the highest difference between GT and daily mean air temperature （DGAT） is as high as 32.35℃. Moreover, by the lag time analysis method it is found that the response time of GT from 0 cm to 20 cm ground depth to the alternate change of snow depth has 10 days lag, while at 40 cm depth the response of DGAT is not significant. This result is different from the previous research by modeling, in which the resnonse denth of ground to the alteration of snow depth is far more than 40 cm.
基金Supported by the National lqatural Science Foundation of China （20736005）.
文摘A computational mass transfer model is proposed for predicting the concentration profile and Murphree efficiency of sieve tray distillation column. The proposed model is based on using modified c＇2 -εc＇ two equations formulation for closing the differential turbulent mass transfer equation with improvement by considering the vapor injected from the sieve hole to be three dimensional. The predicted concentration distributions by using proposed model were checked by experimental work conducted on a sieve tray simulator of 1.2 meters in diameter for desorbing the dissolved oxygen in the feed water by blowing air. The model predictions were confirmed by the experimental measurement. The validation of the proposed model was further tested by comparing the simulated result with the performance of an industrial scale sieve tray distillation column reported by Kunesh et al. for the stripping of toluene from its water solution. The predicted outlet concentration of each tray and the Murphree tray efficiencies under different operating conditions were in agreement with the published data. The simulated turbulent mass transfer diffusivity on each tray was within the range of the experimental result in the same sieve column reported by Cai et al. In addition, the prediction of the influence of sieve tray structure on the tray efficiency by using the proposed model was demonstrated.
基金Supported by the Indian Institute of Technology Guwahati under Grant No:SG/ME/PB/P/01
文摘Submerged arc welding （SAW） is advantageous for joining high thickness materials in large structure due to high material deposition rate. The non-uniform heating and cooling generates the thermal stresses and subsequently the residual stresses and distortion. The longitudinal and transverse residual stresses and angular distortion are generally measured in large panel structure of submerged arc welded fillet joints. Hence, the objective of this present work is to quantify the amount of residual stress and distortion in and around the weld joint due to positioning of stiffeners tack. The tacking sequence influences the level of residual stress and proper controlling of tacking sequences is required to minimize the stress. In present study, an elasto-plastic material behavior is considered to develop the thermo mechanical model which predicts the residual stress and angular distortion with varying tacking sequences. The simulated result reveals that the tacking sequence heavily influences the residual stress and deformation pattern of the single sided fillet joint. The finite element based numerical model is calibrated by comparing the experimental data from published literature. Henceforth, the angular distortions are measured from an in-house developed experimental set-up. A fair agreement between the predicted and experimental results indicates the robustness of the developed numerical model. However, the most significant conclusion from present study states that tack weld position should be placed opposite to the fillet weld side to minimize the residual stress.
基金National Natural Science Foundation of China(No.51175050)
文摘In order to study the response of collision speed caused by the large bus to new flexible barrier,in this paper,with the large bus as the carrier,the full-scale impact tests between flexible barrier and vehicle with the impact velocities of 40 km/h and 60 km/h were carried out separately,following the procedures of the test preparation,test processing,data acquisition, etc,which were based on the test platform of the Large Structure Crash Testing Laboratory of Changsha University of Science and Technology. The important test results which contain the damage of vehicles and barrier,the moving locus of vehicle,the occupant risk index,the maximum dynamic deformation, etc,were obtained through the analysis under the different collision speeds. These provide the necessary reference basis for the further research on the structure topology optimization and improve the comprehensive constraint performance to the flexible barrier.
文摘Operators suffer much diffieulty in manipulating miero-size objects without the assistance of friendly interfaces due to the scaling effects in micro worht. The paper presented a general framework for mieromanipulation robot hased on virtual reality technology. With the framework we brought forward a FDH （Fixed Direction Hulls） based hounding box method to handle the eollision ,teteetion of the peg-in-hole mieroassembly. The eollision response model for the collision between micro needle and hole was presented. The virtual three and corresponding displacement were calculated with the model of bending deformation and pressing ,teformation. Experiments verify the validity of collision response model.
文摘A novel data acquisition system was successfully integrated on-board the Massey Ferguson 3,000 series agricultural tractors for measuring tractor-implement performance. A commercial load cell was incorporated into the existing system for the needed tractor-implement performance, measurements. This system is capable of measuring, displaying and recording, in real-time, the tractor＇s theoretical travel speed, the actual travel speed, the engine speed, the fuel consumption rate, and the drawbar pull. Static calibration tests on various associated sensors for the required measurements show excellent linearity with correlation coefficients that are close to 1. The developed system was extensively and successfully field demonstrated for tractor-implement performance with offset disc harrows on dry, undisturbed loamy soils. Under these conditions, a ratio of tractor power to implement width is suggested. The data also show the existence of a linear relationship between fuel consumption per hectare and specific draught, for the 4 to 9 kN m^-1 range, which suggests the possibility of extending the American Society of Agricultural and Biological Engineers model of draught prediction to forecast fuel consumption. The configuration of the tractor-harrow combination, based on the measurement of the draught required under operational conditions, provides the manufacturers with a reliable indication of the recommended power required for each harrow model. With this type of information farmers can make decisions regarding selection of a suitable tractor-implement combination for their farms. As a consequence, there is improved tractor-harrow productivity and field efficiency.
文摘The main purpose of this paper was to set up a functioning numerical model of data rack verified by an experimental measurement. The numerical model will serve for the flow simulation inside the data rack. For the aim of experimental verification of the server model, a PIV （particle image velocimetry） method was used. The server model was projected based on the original Rack Workstation Dell Precision 17,5400 （2U rack space）. The flow rate in each channel was implemented with the help of pressure loss, which was set up so that the server flow rate corresponded with the measured values. The verification of the correct functioning of the numerical model of the server was carded out together with verifying the numerical model of a small data rack. The experiment was compared with the numerical model for the case of data rack （12U rack space） fitted with two 2U rack workstations Dell Precision R5400, on which the simulation of several phases of the entire data rack with given configuration was carried out.
基金supported by the National Natural Science Foundation of China (Grant 20930140)the Chinese Academy of Sciences and the sponsors of the Centre for Reservoir Geophysics of the Imperial College
文摘Seismic attributes, such as P- and S-wave velocity, Poisson＇s ratio, and acoustic impedances, all generally can be used for distinguishing different rock types. The nonuniqueness can be largely reduced using Lame impedances instead of acoustic impedances as additional constraints. We have followed this method to constitute a petrologic composition model of the upper crust in the Bohai Bay basin, China. We briefly review the seismic parameters used for discrimination of rock types and focus our attention on the sensitivity of different combinations of parameters to determine the composition of materials. Corrections for pressure and temperature are performed in order to compare elastic wave velocities and densities measured at room temperature and surface pressure in laboratory with those for representative rock parameters. In a second step, we find the rock classes in the tested area by contrasting known data to laboratory measurements on a variety of rock samples extracted in the area. The basic field data are P-wave velocity values collected along a seismic profile conducted in the Bozhong Depression. The different rock types belonging to a particular rock class are finally constrained by the seismic velocities, Poisson＇s ratio, density, acoustic impedance, and Lame imoedance related to the topmost 10 km of the Bohai Bav crust.
基金supported by the National Natural Science Foundation of China (Grant No. 41305066)the Special Funds for Public Welfare of China (Grant No. GYHY201306045)the National Basic Research Program of China (Grant Nos. 2010CB951101 and 2010CB428403)
文摘Information on the spatial and temporal patterns of surface carbon flux is crucial to understanding of source/sink mechanisms and projection of future atmospheric CO2 concentrations and climate. This study presents the construction and implementation of a terrestrial carbon cycle data assimilation system based on a dynamic vegetation and terrestrial carbon model Vegetation-Global-Atmosphere-Soil(VEGAS) with an advanced assimilation algorithm, the local ensemble transform Kalman filter(LETKF, hereafter LETKF-VEGAS). An observing system simulation experiment(OSSE) framework was designed to evaluate the reliability of this system, and numerical experiments conducted by the OSSE using leaf area index(LAI) observations suggest that the LETKF-VEGAS can improve the estimations of leaf carbon pool and LAI significantly, with reduced root mean square errors and increased correlation coefficients with true values, as compared to a control run without assimilation. Furthermore, the LETKF-VEGAS has the potential to provide more accurate estimations of the net primary productivity(NPP) and carbon flux to atmosphere(CFta).
基金Supported by the State Scholarship Fund of the China Scholarship Councilthe National Natural Science Foundation of China(Nos.60638020,41206006,41176021,41276028,41306035)+1 种基金the National Basic Research Program of China(973 Program)(No.2011CB409803,2011CB403503)the State Key Laboratory Program(No.SOED1206)
文摘An optical closure study on bio-optical relationships was carried out using radiative transfer model matrix operator method developed by Freie Universitat Berlin. As a case study, the optical closure of bio-optical relationships empirically parameterized with in situ data for the East China Sea was examined. Remote-sensing reflectance （Rrs） was computed from the inherent optical properties predicted by these biooptical relationships and compared with published in situ data. It was found that the simulated Rrs was overestimated for turbid water. To achieve optical closure, bio-optical relationships for absorption and scattering coefficients for suspended particulate matter were adjusted. Furthermore, the results show that the Fournier and Forand phase functions obtained from the adjusted relationships perform better than the Petzold phase function. Therefore, before bio-optical relationships are used for a local sea area, the optical closure should be examined.
