A three-dimensional numerical model is presented for studying the convection-condensation of mixture with vapor in a tube with edgefold-twisted-tape inserts under transition flow.According to the diffusion layer theor...A three-dimensional numerical model is presented for studying the convection-condensation of mixture with vapor in a tube with edgefold-twisted-tape inserts under transition flow.According to the diffusion layer theory and laminar species transport,a condensation model with user defined function is proposed and compared with heat and mass transfer analogy and experimental test.With the condensation model,the influences of gap width and op-erating parameters on thermal-hydrodynamics performance are simulated.As the gap width increases,convection and condensation heat transfer increase initially and then decrease,while convection heat transfer increases sharply and then decreases slightly.Increasing vapor fraction has a significant effect on condensation heat transfer but it has little effect on convective heat transfer.With the increase of inner wall temperature both convection and condensa-tion heat transfer all decrease and the ratio of condensation to total heat decrease dramatically.Increases inlet tem-perature mainly affects convection heat transfer.展开更多
The influence of casting parameters on stray grain formation of a unidirectionally solidified superalloy IN738LC casting with three platforms was investigated by using a 3D cellular automaton-finite element （CAFE） m...The influence of casting parameters on stray grain formation of a unidirectionally solidified superalloy IN738LC casting with three platforms was investigated by using a 3D cellular automaton-finite element （CAFE） model in CALCOSOFT package. The model was first validated by comparison of the reported grain structure of AI-7%Si （mass fraction） alloy. Then, the influence of pouring temperature, heat flux of the lateral surface, convection heat coefficient of the cooled chill and mean undercooling of the bulk nucleation on the stray grain formation was studied during the unidirectional solidification. The predictions show that the stray grain formation is obviously sensitive to the pouring temperature, heat flux and mean undercooling of the bulk nucleation. However, increasing the heat convection coefficient has little influence on the stray grain formation.展开更多
Physical and mathematical models are developed to describe the forced convection condensation heattransfer of saturated vapor flowing axially outside a horizontal tube. The numerical solution of themodels indicates th...Physical and mathematical models are developed to describe the forced convection condensation heattransfer of saturated vapor flowing axially outside a horizontal tube. The numerical solution of themodels indicates the effects of vapor velocity on the liquid film thickness. The result verifies the enhancement of condensation heat transfer caused by such flow.展开更多
A two dimensional model of the transient natural convection in a freezer is studied numerically by finite volume approach.The temperatures of the freezer outside surfaces and the evaporator vary in specified manners,w...A two dimensional model of the transient natural convection in a freezer is studied numerically by finite volume approach.The temperatures of the freezer outside surfaces and the evaporator vary in specified manners,which were taken from an experimental work.The fluid in the freezer is of the Bousinnesq type and the flow is assumed laminar,The transient heat conduction in the insulating layers and the temperature and velocity fields of the fluid are solved conjugately.The radiation heat transfer between the freezer inner surfaces is taken into account by using the additional source term method.The distributions of the local Nusselt number along the upper and lower surfaces of the evaporator and their average values in the period of periodically unsteady operation are calculated.Comparisons are made between the results with and without consideration of inner surface radiative heat transfer.It is found that the radiative heat transfer between the inner surfaces has a profound effect on the evaporator heat transfer characteristics.展开更多
基金Supported by the Technology Development Program of Jinan City (201102039,201202087)the Technology Development Program of Shandong Province (2011GNC11401)
文摘A three-dimensional numerical model is presented for studying the convection-condensation of mixture with vapor in a tube with edgefold-twisted-tape inserts under transition flow.According to the diffusion layer theory and laminar species transport,a condensation model with user defined function is proposed and compared with heat and mass transfer analogy and experimental test.With the condensation model,the influences of gap width and op-erating parameters on thermal-hydrodynamics performance are simulated.As the gap width increases,convection and condensation heat transfer increase initially and then decrease,while convection heat transfer increases sharply and then decreases slightly.Increasing vapor fraction has a significant effect on condensation heat transfer but it has little effect on convective heat transfer.With the increase of inner wall temperature both convection and condensa-tion heat transfer all decrease and the ratio of condensation to total heat decrease dramatically.Increases inlet tem-perature mainly affects convection heat transfer.
基金Project(08BZ1130100) supported by the Science and Technology Committee of Shanghai,ChinaProject(SHUCX102251) supported by the Innovation Fund for Graduate Student of Shanghai University,China
文摘The influence of casting parameters on stray grain formation of a unidirectionally solidified superalloy IN738LC casting with three platforms was investigated by using a 3D cellular automaton-finite element （CAFE） model in CALCOSOFT package. The model was first validated by comparison of the reported grain structure of AI-7%Si （mass fraction） alloy. Then, the influence of pouring temperature, heat flux of the lateral surface, convection heat coefficient of the cooled chill and mean undercooling of the bulk nucleation on the stray grain formation was studied during the unidirectional solidification. The predictions show that the stray grain formation is obviously sensitive to the pouring temperature, heat flux and mean undercooling of the bulk nucleation. However, increasing the heat convection coefficient has little influence on the stray grain formation.
文摘Physical and mathematical models are developed to describe the forced convection condensation heattransfer of saturated vapor flowing axially outside a horizontal tube. The numerical solution of themodels indicates the effects of vapor velocity on the liquid film thickness. The result verifies the enhancement of condensation heat transfer caused by such flow.
基金the National Natural Science Foundation of China
文摘A two dimensional model of the transient natural convection in a freezer is studied numerically by finite volume approach.The temperatures of the freezer outside surfaces and the evaporator vary in specified manners,which were taken from an experimental work.The fluid in the freezer is of the Bousinnesq type and the flow is assumed laminar,The transient heat conduction in the insulating layers and the temperature and velocity fields of the fluid are solved conjugately.The radiation heat transfer between the freezer inner surfaces is taken into account by using the additional source term method.The distributions of the local Nusselt number along the upper and lower surfaces of the evaporator and their average values in the period of periodically unsteady operation are calculated.Comparisons are made between the results with and without consideration of inner surface radiative heat transfer.It is found that the radiative heat transfer between the inner surfaces has a profound effect on the evaporator heat transfer characteristics.
