Three steam distillation devices (D-1, D-2 and D-4) or one simultaneous distillation (D-3, water-diethyl ether) as well as the process of CO2-SFE (Supercritical fluid extraction) were adopted in extraction of essentia...Three steam distillation devices (D-1, D-2 and D-4) or one simultaneous distillation (D-3, water-diethyl ether) as well as the process of CO2-SFE (Supercritical fluid extraction) were adopted in extraction of essential oils from Chinese-fir (Cunninghamia lancedata (Lamb) Hook.) and the chemical components of the extracted essential oil were analyzed by Gas chromatograph-MS analyses. The results showed that the essential oil could be almost extracted out within 2 hours and the device-3 had the highest extraction efficiency. The major chemical component of the oil was cedrol. The yield of the extracted essential oils from Chinese fir decreased gradually with the increase of the distillation time. The best condition for extraction by means of CO2-SFE is 100 kg·cm?2 in pressure and 40°C in temperature for. Keywords Chinese fir - Essential oil - Cedrol - Supercritical fluid extraction CLC number S781.4 Document code A Foundation item: This paper was support by the Key Foundation Research Project (G1999016001) of China and the Japan International Cooperation AgencyBiography: HUANG Luo-hua (1957-), male, Research associate, Research Institute of Wood Industry, Chinese Academy of forestry, Beijing 100091, P. R. ChinaResponsible editor: Song Funan展开更多
Sand casting and die casting processes have been used widely for complex automotive products such as knuckle, arm, etc.Usually, a part fabricated by casting has limited strength due to manufacturing defects such as th...Sand casting and die casting processes have been used widely for complex automotive products such as knuckle, arm, etc.Usually, a part fabricated by casting has limited strength due to manufacturing defects such as the dendrite structure, segregation and porosities.As an attempt to offer a solution to these problems, forging has been used as an alternative process.However, the forging process provides limited formability for complex shape products.Rheo-forging of metal offers not only superior mechanical strength but also requires significantly lower machine loads than solid forming processes.In order to produce semi-solid materials of the desired microstructure, a stirring process is applied during solidification of molten metal.The results of an A356 aluminum alloy sample, which are obtained by experiment and by simulation using DEFORM 3D, are present.展开更多
In order to supply theoretical guidance to hydraulic transformer's design and application,the effect of the number of plungers in hydraulic transformer on its flow characteristic is analyzed,theoretical analysis a...In order to supply theoretical guidance to hydraulic transformer's design and application,the effect of the number of plungers in hydraulic transformer on its flow characteristic is analyzed,theoretical analysis and simulation are done on hydraulic transformer's flow characteristic when the number of plungers is different.Based on the working principle of swash plate piston hydraulic components,mathematical models of instantaneous flow and flow pulsation rate are built,and simulation study is done with MATLAB.As a result,the effect is found,and some conclusions worth referring to are obtained.展开更多
The mulberry paper handmade dryer uses downdraft gasifier, which is a continuous hot air dryer. The downdraft gasifier uses charcoal or wood chip as fuel to produce the producer gas for a dryer heat source. Two steps ...The mulberry paper handmade dryer uses downdraft gasifier, which is a continuous hot air dryer. The downdraft gasifier uses charcoal or wood chip as fuel to produce the producer gas for a dryer heat source. Two steps operation of a dryer as follows： The frst was to reduce mulberry paper pulp moisture by an air vacuum pump; the second was a continuous hot air drying process. The optimum condition drying, the capacity of dryer, the fuel consumption, the drying constant （k） and economics analysis were investigated. It was found that the first step could be to reduce mulberry paper pulp moisture content about 25% and the suitable condition drying was 80 ~C drying temperature, 0.04 kg/s air mass flow rate and 0.29 m/min chain conveyor speed, respectively. The capacity of this dryer was 20 sheets per hour. The quality of mulberry paper product was very good （based on the standard of mulberry paper community 41/2546） and the fuel consumption rate was 5 kg/h （charcoal）. The drying constant was about 0.532933-0.541367 min~ and the drying constant was a function of drying temperature （T）, air mass flow rate （F） and conveyor speed （10 as equation of k（T, F, V） = 0.567494 ＋ 0.000422T- 1.40588F- 0.000205 V （R2 = 0.9254） and the breakeven point of dryer was 0.79 years.展开更多
A new process for the direct chlorination of 2-chloro-5-methylpyridine to yield 2-chloro-5-chloro-methylpyridine in an airlift loop reactor (ALR) has been studied. Five main reaction conditions including TR, na/ns, cp...A new process for the direct chlorination of 2-chloro-5-methylpyridine to yield 2-chloro-5-chloro-methylpyridine in an airlift loop reactor (ALR) has been studied. Five main reaction conditions including TR, na/ns, cp, Qg and dD/dR were optimized. The average molar yield and purity of 2-chloro-5-chloromethylpyridine obtained were 79% and 98.5% respectively under the optimum operating conditions. Finally, the efficiency for the preparation of 2-chloro-5-chloromethylpyridine with ALR and stirred tank reactor (STR) respectively was compared.展开更多
Xiamen Bay in South China has experienced extensive coastal exploitation since the 1950s,resulting in some severe environmental problems.Local authorities now have completed or are implementing many environmental rest...Xiamen Bay in South China has experienced extensive coastal exploitation since the 1950s,resulting in some severe environmental problems.Local authorities now have completed or are implementing many environmental restoration projects.Evaluating the cumulative impact of exploitation and restoration activities on the environment is a complicated multi-disciplinary problem.However,hydrodynamic changes in the bay caused by such coastal projects can be characterized directly and definitively through numerical modeling.This paper assesses the cumulative effect of coastal projects on the hydrodynamic setting using a high-resolution numerical modeling method that makes use of tidal current speeds and the tidal prism as two hydrodynamic indices.Changes in tidal velocity and the characteristics of the tidal prism show that hydrodynamic conditions have declined from 1938 to 2007 in the full-tide area.The tidal current speed and tidal prism have decreased by 40% in the western part of the bay and 20% in the eastern part of the bay.Because of the linear relationship between tidal prism and area,the degraded hydrodynamic conditions are anticipated to be restored to 1972 levels following the completion of current and proposed restoration projects,i.e.33% and 15% decrease in the hydrodynamic conditions of 1938 for the western and eastern parts of the bay,respectively.The results indicate that hydrodynamic conditions can be restored to some extent with the implementation of a sustainable coastal development plan,although a full reversal of conditions is not possible.To fully assess the environmental changes in a region,more indices,e.g.,water quality and ecosystem parameters,should be considered in future evaluations.展开更多
With concentrated juice of mulberry as raw material, the influence of type and dosage of dry aid, the inlet air tempera- ture, inlet flow rate, and rotating speed on spray drying was studied. The spray drying processi...With concentrated juice of mulberry as raw material, the influence of type and dosage of dry aid, the inlet air tempera- ture, inlet flow rate, and rotating speed on spray drying was studied. The spray drying processing conditions of mulberry pow- der were optimized by the L9 （3^4） orthogonal test on the basis of single factor experiment. The results showed that optimum technical parameters to produce mulberry powder were： lS-cyclodextrin as dry aids with dosage of 30%, inlet air temperature of 180 ℃, rotating speed of 18 000 r/min and inlet flow rate of 30 mL/min. The mulberry powder under this optimum process conditions had a loose structure and bright color, fruity flavor was rich, the anthocyanin content for 54.67 mg/g, moisture content for 5.6% and sensory scores for 83.展开更多
The Software Defined Networking(SDN) paradigm separates the control plane from the packet forwarding plane, and provides applications with a centralized view of the distributed network state. Thanks to the flexibility...The Software Defined Networking(SDN) paradigm separates the control plane from the packet forwarding plane, and provides applications with a centralized view of the distributed network state. Thanks to the flexibility and efficiency of the traffic flow management, SDN based traffic engineering increases network utilization and improves Quality of Service(QoS). In this paper, an SDN based traffic scheduling algorithm called CATS is proposed to detect and control congestions in real time. In particular, a new concept of aggregated elephant flow is presented. And then a traffic scheduling optimization model is formulated with the goal of minimizing the variance of link utilization and improving QoS. We develop a chaos genetic algorithm to solve this NP-hard problem. At the end of this paper, we use Mininet, Floodlight and video traces to simulate the SDN enabled video networking. We simulate both the case of live video streaming in the wide area backbone network and the case of video file transferring among data centers. Simulation results show that the proposed algorithm CATS effectively eliminates network congestions in subsecond. In consequence, CATS improves the QoS with lower packet loss rate and balanced link utilization.展开更多
DAR （diffusion absorption refrigeration） cycle is driven by heat and has no moving parts. It is based on refrigerant and absorbent as the working fluid together with hydrogen as an auxiliary inert gas. To circulate ...DAR （diffusion absorption refrigeration） cycle is driven by heat and has no moving parts. It is based on refrigerant and absorbent as the working fluid together with hydrogen as an auxiliary inert gas. To circulate the working fluid without a mechanical pump, the diffusion absorption cycle relies on a bubble pump. Experimental system was designed and operated. Its aim was to investigate the performance of a bubble pump operating with three lifting tubes. The experimental results of the system were compared to existing models. The comparison showed that there was a bad agreement between the experimental and the theoretical results.展开更多
There is a great difference between the distribution and evolvement characteristics of slope geological hazard in the same geographical location and climatic conditions,taking the similar structural-genetic connection...There is a great difference between the distribution and evolvement characteristics of slope geological hazard in the same geographical location and climatic conditions,taking the similar structural-genetic connection in Wudongde reservoir area of Jinshajiang River valley for example. In all engineering geological conditions,the chronologic age and attitude of strata,and the lithologic association factors control the distributions and evolvement characteristics of slope geological hazard in the studied area. The study shows that the slopes in geological evolution are in different stages. The conclusion helps to understand the types and the intensity of geological disasters.展开更多
Managing a large-scale distributed engineering project needs skilled, motivated and committed personnel. Unified and aligned working methods are needed. Project alignment is the process of ensuring that key stakeholde...Managing a large-scale distributed engineering project needs skilled, motivated and committed personnel. Unified and aligned working methods are needed. Project alignment is the process of ensuring that key stakeholders share a common understanding of the project mission, goals, objectives, tactics, work processes and plans and have the required competences and skills. Based on current advances in the area of collaborative networked organizations, project management and Internet web 2.0 technologies, the authors have identified further needs and opportunities for development in the area of Collaborative Project Management. The Project Alignment Booster is a set of software services used to promote collaborative project management. The tool has been developed to suit industrial requirements in the area of large and complicated engineering project management, The paper reports the results of developing a toolkit to support collaborative project alignment.展开更多
Experimental study is performed to design and develop a cylindrical micro-pump driven by expansion and contraction of the heat deformation material, whose variation is caused with the aid of heating and cooling proper...Experimental study is performed to design and develop a cylindrical micro-pump driven by expansion and contraction of the heat deformation material, whose variation is caused with the aid of heating and cooling properties of Peltier devices. The pump consists of the diffuser valve unit, the heat deformation material unit, the nozzle valve unit, the Peltier devices and the cover. The input current of the Peltier devices is controlled by the bipolar power supply so that the Peltier devices are heated and cooled periodically. The working fluid flow in the micro-pump is caused by the periodical thermal deformation of material which is caused by the periodical heating and cooling of the Peltier devices. In order to measure the fluid flow in the micro-pump, micro air bubbles are employed as a tracer. The corresponding movement is recorded by X-ray apparatus and its velocity is measured by PIV （particle image velocimetry）. It is found that, the micro-pump developed here can make the working fluid flow. The corresponding fluid flow in the micro pump is confirmed by the numerical method.展开更多
The characteristics of the confined bubble and elongated bubble in subcooled flow boiling in a single horizontal rectangular microchannel with hydraulic diameter Dh=1mm are studied experimentally. The channel with 1 &...The characteristics of the confined bubble and elongated bubble in subcooled flow boiling in a single horizontal rectangular microchannel with hydraulic diameter Dh=1mm are studied experimentally. The channel with 1 ×1mm cross section is fabricated in a thin copper plate whose confinement number is Co=2.8 and the degassed deionized water is used as the working fluid. Visualization on the confined and elongated bubbles inside the microchannel is carded out by employing a high-speed CCD camera with a rnicrolens. The recorded images are carefully analyzed to illustrate the behaviors of the confinement and elongation processes of the bubble. The boiling number is used as an adjustable parameter to regulate the operating conditions which is eventually found to take a vital role in the bubble elongation process. Two formation patterns of the confined and elongated bubble are identified and the interactions between the neighboring confined and elongated bubbles are elucidated.展开更多
基金The Key Foundation Research Project (G1999016001) of China and the Japan International Cooperation Agency
文摘Three steam distillation devices (D-1, D-2 and D-4) or one simultaneous distillation (D-3, water-diethyl ether) as well as the process of CO2-SFE (Supercritical fluid extraction) were adopted in extraction of essential oils from Chinese-fir (Cunninghamia lancedata (Lamb) Hook.) and the chemical components of the extracted essential oil were analyzed by Gas chromatograph-MS analyses. The results showed that the essential oil could be almost extracted out within 2 hours and the device-3 had the highest extraction efficiency. The major chemical component of the oil was cedrol. The yield of the extracted essential oils from Chinese fir decreased gradually with the increase of the distillation time. The best condition for extraction by means of CO2-SFE is 100 kg·cm?2 in pressure and 40°C in temperature for. Keywords Chinese fir - Essential oil - Cedrol - Supercritical fluid extraction CLC number S781.4 Document code A Foundation item: This paper was support by the Key Foundation Research Project (G1999016001) of China and the Japan International Cooperation AgencyBiography: HUANG Luo-hua (1957-), male, Research associate, Research Institute of Wood Industry, Chinese Academy of forestry, Beijing 100091, P. R. ChinaResponsible editor: Song Funan
基金Project(2009-0081077) supported by the National Research Foundation (NRF) by Korea Government
文摘Sand casting and die casting processes have been used widely for complex automotive products such as knuckle, arm, etc.Usually, a part fabricated by casting has limited strength due to manufacturing defects such as the dendrite structure, segregation and porosities.As an attempt to offer a solution to these problems, forging has been used as an alternative process.However, the forging process provides limited formability for complex shape products.Rheo-forging of metal offers not only superior mechanical strength but also requires significantly lower machine loads than solid forming processes.In order to produce semi-solid materials of the desired microstructure, a stirring process is applied during solidification of molten metal.The results of an A356 aluminum alloy sample, which are obtained by experiment and by simulation using DEFORM 3D, are present.
基金Supported by the National Natural Science Foundation of China(No.50875054)the Open Fund of State Key Laboratory of Fluid Power Transmission and Control,Zhejiang University(No.GZKF-2008003)
文摘In order to supply theoretical guidance to hydraulic transformer's design and application,the effect of the number of plungers in hydraulic transformer on its flow characteristic is analyzed,theoretical analysis and simulation are done on hydraulic transformer's flow characteristic when the number of plungers is different.Based on the working principle of swash plate piston hydraulic components,mathematical models of instantaneous flow and flow pulsation rate are built,and simulation study is done with MATLAB.As a result,the effect is found,and some conclusions worth referring to are obtained.
文摘The mulberry paper handmade dryer uses downdraft gasifier, which is a continuous hot air dryer. The downdraft gasifier uses charcoal or wood chip as fuel to produce the producer gas for a dryer heat source. Two steps operation of a dryer as follows： The frst was to reduce mulberry paper pulp moisture by an air vacuum pump; the second was a continuous hot air drying process. The optimum condition drying, the capacity of dryer, the fuel consumption, the drying constant （k） and economics analysis were investigated. It was found that the first step could be to reduce mulberry paper pulp moisture content about 25% and the suitable condition drying was 80 ~C drying temperature, 0.04 kg/s air mass flow rate and 0.29 m/min chain conveyor speed, respectively. The capacity of this dryer was 20 sheets per hour. The quality of mulberry paper product was very good （based on the standard of mulberry paper community 41/2546） and the fuel consumption rate was 5 kg/h （charcoal）. The drying constant was about 0.532933-0.541367 min~ and the drying constant was a function of drying temperature （T）, air mass flow rate （F） and conveyor speed （10 as equation of k（T, F, V） = 0.567494 ＋ 0.000422T- 1.40588F- 0.000205 V （R2 = 0.9254） and the breakeven point of dryer was 0.79 years.
基金Natural Science Foundation of Tianjin(No.013605711)National Natural Science Foundation of China(No.20176040)
文摘A new process for the direct chlorination of 2-chloro-5-methylpyridine to yield 2-chloro-5-chloro-methylpyridine in an airlift loop reactor (ALR) has been studied. Five main reaction conditions including TR, na/ns, cp, Qg and dD/dR were optimized. The average molar yield and purity of 2-chloro-5-chloromethylpyridine obtained were 79% and 98.5% respectively under the optimum operating conditions. Finally, the efficiency for the preparation of 2-chloro-5-chloromethylpyridine with ALR and stirred tank reactor (STR) respectively was compared.
基金Supported by the National Natural Science Foundation of China(Nos.41076001,40810069004)the Fundamental Research Funds for the Central Universities(No.2010121029)
文摘Xiamen Bay in South China has experienced extensive coastal exploitation since the 1950s,resulting in some severe environmental problems.Local authorities now have completed or are implementing many environmental restoration projects.Evaluating the cumulative impact of exploitation and restoration activities on the environment is a complicated multi-disciplinary problem.However,hydrodynamic changes in the bay caused by such coastal projects can be characterized directly and definitively through numerical modeling.This paper assesses the cumulative effect of coastal projects on the hydrodynamic setting using a high-resolution numerical modeling method that makes use of tidal current speeds and the tidal prism as two hydrodynamic indices.Changes in tidal velocity and the characteristics of the tidal prism show that hydrodynamic conditions have declined from 1938 to 2007 in the full-tide area.The tidal current speed and tidal prism have decreased by 40% in the western part of the bay and 20% in the eastern part of the bay.Because of the linear relationship between tidal prism and area,the degraded hydrodynamic conditions are anticipated to be restored to 1972 levels following the completion of current and proposed restoration projects,i.e.33% and 15% decrease in the hydrodynamic conditions of 1938 for the western and eastern parts of the bay,respectively.The results indicate that hydrodynamic conditions can be restored to some extent with the implementation of a sustainable coastal development plan,although a full reversal of conditions is not possible.To fully assess the environmental changes in a region,more indices,e.g.,water quality and ecosystem parameters,should be considered in future evaluations.
文摘With concentrated juice of mulberry as raw material, the influence of type and dosage of dry aid, the inlet air tempera- ture, inlet flow rate, and rotating speed on spray drying was studied. The spray drying processing conditions of mulberry pow- der were optimized by the L9 （3^4） orthogonal test on the basis of single factor experiment. The results showed that optimum technical parameters to produce mulberry powder were： lS-cyclodextrin as dry aids with dosage of 30%, inlet air temperature of 180 ℃, rotating speed of 18 000 r/min and inlet flow rate of 30 mL/min. The mulberry powder under this optimum process conditions had a loose structure and bright color, fruity flavor was rich, the anthocyanin content for 54.67 mg/g, moisture content for 5.6% and sensory scores for 83.
基金partly supported by NSFC under grant No.61371191 and No.61472389
文摘The Software Defined Networking(SDN) paradigm separates the control plane from the packet forwarding plane, and provides applications with a centralized view of the distributed network state. Thanks to the flexibility and efficiency of the traffic flow management, SDN based traffic engineering increases network utilization and improves Quality of Service(QoS). In this paper, an SDN based traffic scheduling algorithm called CATS is proposed to detect and control congestions in real time. In particular, a new concept of aggregated elephant flow is presented. And then a traffic scheduling optimization model is formulated with the goal of minimizing the variance of link utilization and improving QoS. We develop a chaos genetic algorithm to solve this NP-hard problem. At the end of this paper, we use Mininet, Floodlight and video traces to simulate the SDN enabled video networking. We simulate both the case of live video streaming in the wide area backbone network and the case of video file transferring among data centers. Simulation results show that the proposed algorithm CATS effectively eliminates network congestions in subsecond. In consequence, CATS improves the QoS with lower packet loss rate and balanced link utilization.
文摘DAR （diffusion absorption refrigeration） cycle is driven by heat and has no moving parts. It is based on refrigerant and absorbent as the working fluid together with hydrogen as an auxiliary inert gas. To circulate the working fluid without a mechanical pump, the diffusion absorption cycle relies on a bubble pump. Experimental system was designed and operated. Its aim was to investigate the performance of a bubble pump operating with three lifting tubes. The experimental results of the system were compared to existing models. The comparison showed that there was a bad agreement between the experimental and the theoretical results.
文摘There is a great difference between the distribution and evolvement characteristics of slope geological hazard in the same geographical location and climatic conditions,taking the similar structural-genetic connection in Wudongde reservoir area of Jinshajiang River valley for example. In all engineering geological conditions,the chronologic age and attitude of strata,and the lithologic association factors control the distributions and evolvement characteristics of slope geological hazard in the studied area. The study shows that the slopes in geological evolution are in different stages. The conclusion helps to understand the types and the intensity of geological disasters.
文摘Managing a large-scale distributed engineering project needs skilled, motivated and committed personnel. Unified and aligned working methods are needed. Project alignment is the process of ensuring that key stakeholders share a common understanding of the project mission, goals, objectives, tactics, work processes and plans and have the required competences and skills. Based on current advances in the area of collaborative networked organizations, project management and Internet web 2.0 technologies, the authors have identified further needs and opportunities for development in the area of Collaborative Project Management. The Project Alignment Booster is a set of software services used to promote collaborative project management. The tool has been developed to suit industrial requirements in the area of large and complicated engineering project management, The paper reports the results of developing a toolkit to support collaborative project alignment.
文摘Experimental study is performed to design and develop a cylindrical micro-pump driven by expansion and contraction of the heat deformation material, whose variation is caused with the aid of heating and cooling properties of Peltier devices. The pump consists of the diffuser valve unit, the heat deformation material unit, the nozzle valve unit, the Peltier devices and the cover. The input current of the Peltier devices is controlled by the bipolar power supply so that the Peltier devices are heated and cooled periodically. The working fluid flow in the micro-pump is caused by the periodical thermal deformation of material which is caused by the periodical heating and cooling of the Peltier devices. In order to measure the fluid flow in the micro-pump, micro air bubbles are employed as a tracer. The corresponding movement is recorded by X-ray apparatus and its velocity is measured by PIV （particle image velocimetry）. It is found that, the micro-pump developed here can make the working fluid flow. The corresponding fluid flow in the micro pump is confirmed by the numerical method.
基金supported by National Natural Science Foundation of China (No. 51176008)the Fundamental Research Funds for the Central Universities (No.2011YJS267)Jiangsu Key Laboratory of Process Enhancement & New Energy Equipment Technology(Nanjing University of Technology)
文摘The characteristics of the confined bubble and elongated bubble in subcooled flow boiling in a single horizontal rectangular microchannel with hydraulic diameter Dh=1mm are studied experimentally. The channel with 1 ×1mm cross section is fabricated in a thin copper plate whose confinement number is Co=2.8 and the degassed deionized water is used as the working fluid. Visualization on the confined and elongated bubbles inside the microchannel is carded out by employing a high-speed CCD camera with a rnicrolens. The recorded images are carefully analyzed to illustrate the behaviors of the confinement and elongation processes of the bubble. The boiling number is used as an adjustable parameter to regulate the operating conditions which is eventually found to take a vital role in the bubble elongation process. Two formation patterns of the confined and elongated bubble are identified and the interactions between the neighboring confined and elongated bubbles are elucidated.
