In areas with a complex surface,the acquisition and processing of seismic data is a great challenge.Although elevation-static corrections can be used to eliminate the influences of topography,the distortions of seismi...In areas with a complex surface,the acquisition and processing of seismic data is a great challenge.Although elevation-static corrections can be used to eliminate the influences of topography,the distortions of seismic wavefields caused by simple vertical time shifts still greatly degrade the quality of the migrated images.Ray-based migration methods which can extrapolate and image the wavefields directly from the rugged topography are efficient ways to solve the problems mentioned above.In this paper,we carry out a study of prestack Gaussian beam depth migration under complex surface conditions.We modify the slant stack formula in order to contain the information of surface elevations and get an improved method with more accuracy by compositing local plane-wave components directly from the complex surface.First,we introduce the basic rules and computational procedures of conventional Gaussian beam migration.Then,we give the original method of Gaussian beam migration under complex surface conditions and an improved method in this paper.Finally,we validate the effectiveness of the improved method with trials of model and real data.展开更多
On basis of the research result of stripe rust for 16 years since 1999,the epidemic characteristics and trend of stripe rust in the city were determined.Namely,the earlier the initial stage appeared,the heavier the di...On basis of the research result of stripe rust for 16 years since 1999,the epidemic characteristics and trend of stripe rust in the city were determined.Namely,the earlier the initial stage appeared,the heavier the disease would be.Furthermore,stripe rust has two introduction infection peaks,of which the first peak plays a key role.In farmlands,there are one to three epidemic peaks,and the infection area of the first peak plays the key role on the epidemic area of that year.In addition,the accumulated areas of late January was in significantly positive correlation with annually total area,with a correlation coefficient of 0.769 2.In recent 16 years,the frequency of severe stripe rust was as high as 81.25% which was 50% higher than that before 1995.The slight stripe rust became just in 2013,with a frequency of 6.3%,which indicated that the city has become a region hit by severe stripe rust.The internal reason is the reduction or loss of wheat variety＇s resistance to tripe rust for a new physiological race of rust is becoming pathogenic stronger and be the major race.Big fluctuation of temperatures in warm winter and spring,foggy and dew days slants much would be the external reason.展开更多
The conventional acoustic logging interpretation method, which is based on vertical wells that penetrate isotropic formations, is not suitable for horizontal and deviated wells penetrating anisotropic formations. This...The conventional acoustic logging interpretation method, which is based on vertical wells that penetrate isotropic formations, is not suitable for horizontal and deviated wells penetrating anisotropic formations. This unsuitability is because during horizontal and deviated well drilling, cuttings will splash on the well wall or fall into the borehole bottom and form a thin bed of cuttings. In addition, the high velocity layers at different depths and intrinsic anisotropy may affect acoustic logging measurements. In this study, we examine how these factors affect the acoustic wave slowness measured in horizontal and deviated wells that are surrounded by an anisotropic medium using numerical simulation. We use the staggered-grid finite difference method in time domain （FDTD） combined with hybrid-PML. First, we acquire the acoustic slowness using a simulated array logging system, and then, we analyze how various factors affect acoustic slowness measurements and the differences between the effects of these factors. The factors considered are high-velocity layers, thin beds of cuttings, dipping angle, formation thickness, and anisotropy. The simulation results show that these factors affect acoustic wave slowness measurements differently. We observe that when the wavelength is much smaller than the distance between the borehole wall and high velocity layer, the true slowness of the formation could be acquired. When the wavelengths are of the same order （i.e., in the near-field scenarios）, the geometrical acoustics theory is no longer applicable. Furthermore, when a thin bed of cuttings exists at the bottom of the borehole, Fermat＇s principle is still applicable, and true slowness can be acquired. In anisotropic formations, the measured slowness changes with increments in the dipping angle. Finally, for a measurement system with specific spacing, the slowness of a thin target layer can be acquired when the distance covered by the logging tool is sufficiently long. Based on systematical simulations with different dipping angles and anisotropy in homogenous TI media, slowness estimation charts are established to quantitatively determine the slowness at any dipping angle and for any value of the anisotropic ratio. Synthetic examples with different acoustic logging tools and different elastic parameters demonstrate that the acoustic slowness estimation method can be conveniently applied to horizontal and deviated wells in TI formations with high accuracy.展开更多
According to the field survey and ^14C dating at Luhuitou, southern Hainan Island, a subsiding area, the authors conclude the high sea level history recorded by coral reef in the Holocene. At least 4 sea level high-st...According to the field survey and ^14C dating at Luhuitou, southern Hainan Island, a subsiding area, the authors conclude the high sea level history recorded by coral reef in the Holocene. At least 4 sea level high-stands can be identified from the distribution of coral reef ages： 7300 - 6000 cal.aBP, 4800 - 4700 cal.aBP, 4300 - 4200 cal.aBP and 3100 - 2900 cal.aBP. The highest sea level occurred around 7300 - 6700 cal.aBP, and biological-morphological zones took their shape during the stage. The later coral reefs developed in ponds, depressions, and developed outwards on both sides of Luhuitou peninsula. The modern coral reefs are developing in out reef flat and reef-front slope. Moreover, the time of high sea levels in the northern South China Sea recorded by coral reefs in the Luhuitou peninsula can link up with that in other parts of South China Sea. That means the high sea levels in the South China Sea during the Holocene, which are relative to the warming climate, have the global background.展开更多
In summer, Cha No. 39 of 292 bags and 205 of 244 bags were inter- planted with Dendrobium officinale on cultivation bed, respectively, whose yields and biological efficiencies reached 102.46 kg and 103.98%, and 96.77 ...In summer, Cha No. 39 of 292 bags and 205 of 244 bags were inter- planted with Dendrobium officinale on cultivation bed, respectively, whose yields and biological efficiencies reached 102.46 kg and 103.98%, and 96.77 kg and 113.32%, accordingly. The seedlings of Dendrobium officinale interplanted with Pleurotus os- treatus grew by 2.78 cm during 10 weeks on cultivation beds, and the seedlings grew by 2.68 cm in the cultivation beds without interplanting arrangement. These demonstrated that the interplanting of Dendrobium officinale and Pleurotus ostreatus has none adverse effects on growth of Dendrobium officinale.展开更多
基金supported by the National 863 Program of China(Grant No.2007AA060502)the National 973 Program of China(Grant No.2007CB209605)the Graduate Student Innovation Fund of China University of Petroleum(EastChina)(Grant No.S2010-1).
文摘In areas with a complex surface,the acquisition and processing of seismic data is a great challenge.Although elevation-static corrections can be used to eliminate the influences of topography,the distortions of seismic wavefields caused by simple vertical time shifts still greatly degrade the quality of the migrated images.Ray-based migration methods which can extrapolate and image the wavefields directly from the rugged topography are efficient ways to solve the problems mentioned above.In this paper,we carry out a study of prestack Gaussian beam depth migration under complex surface conditions.We modify the slant stack formula in order to contain the information of surface elevations and get an improved method with more accuracy by compositing local plane-wave components directly from the complex surface.First,we introduce the basic rules and computational procedures of conventional Gaussian beam migration.Then,we give the original method of Gaussian beam migration under complex surface conditions and an improved method in this paper.Finally,we validate the effectiveness of the improved method with trials of model and real data.
文摘On basis of the research result of stripe rust for 16 years since 1999,the epidemic characteristics and trend of stripe rust in the city were determined.Namely,the earlier the initial stage appeared,the heavier the disease would be.Furthermore,stripe rust has two introduction infection peaks,of which the first peak plays a key role.In farmlands,there are one to three epidemic peaks,and the infection area of the first peak plays the key role on the epidemic area of that year.In addition,the accumulated areas of late January was in significantly positive correlation with annually total area,with a correlation coefficient of 0.769 2.In recent 16 years,the frequency of severe stripe rust was as high as 81.25% which was 50% higher than that before 1995.The slight stripe rust became just in 2013,with a frequency of 6.3%,which indicated that the city has become a region hit by severe stripe rust.The internal reason is the reduction or loss of wheat variety＇s resistance to tripe rust for a new physiological race of rust is becoming pathogenic stronger and be the major race.Big fluctuation of temperatures in warm winter and spring,foggy and dew days slants much would be the external reason.
基金supported by National Natural Science Foundation of China(No.41204094)Science Foundation of China University of Petroleum,Beijing(No.2462015YQ0506)
文摘The conventional acoustic logging interpretation method, which is based on vertical wells that penetrate isotropic formations, is not suitable for horizontal and deviated wells penetrating anisotropic formations. This unsuitability is because during horizontal and deviated well drilling, cuttings will splash on the well wall or fall into the borehole bottom and form a thin bed of cuttings. In addition, the high velocity layers at different depths and intrinsic anisotropy may affect acoustic logging measurements. In this study, we examine how these factors affect the acoustic wave slowness measured in horizontal and deviated wells that are surrounded by an anisotropic medium using numerical simulation. We use the staggered-grid finite difference method in time domain （FDTD） combined with hybrid-PML. First, we acquire the acoustic slowness using a simulated array logging system, and then, we analyze how various factors affect acoustic slowness measurements and the differences between the effects of these factors. The factors considered are high-velocity layers, thin beds of cuttings, dipping angle, formation thickness, and anisotropy. The simulation results show that these factors affect acoustic wave slowness measurements differently. We observe that when the wavelength is much smaller than the distance between the borehole wall and high velocity layer, the true slowness of the formation could be acquired. When the wavelengths are of the same order （i.e., in the near-field scenarios）, the geometrical acoustics theory is no longer applicable. Furthermore, when a thin bed of cuttings exists at the bottom of the borehole, Fermat＇s principle is still applicable, and true slowness can be acquired. In anisotropic formations, the measured slowness changes with increments in the dipping angle. Finally, for a measurement system with specific spacing, the slowness of a thin target layer can be acquired when the distance covered by the logging tool is sufficiently long. Based on systematical simulations with different dipping angles and anisotropy in homogenous TI media, slowness estimation charts are established to quantitatively determine the slowness at any dipping angle and for any value of the anisotropic ratio. Synthetic examples with different acoustic logging tools and different elastic parameters demonstrate that the acoustic slowness estimation method can be conveniently applied to horizontal and deviated wells in TI formations with high accuracy.
基金We gratefully acknowledge the financial supports from the National Natural Science Foundation of China(Grant No.49976015).
文摘According to the field survey and ^14C dating at Luhuitou, southern Hainan Island, a subsiding area, the authors conclude the high sea level history recorded by coral reef in the Holocene. At least 4 sea level high-stands can be identified from the distribution of coral reef ages： 7300 - 6000 cal.aBP, 4800 - 4700 cal.aBP, 4300 - 4200 cal.aBP and 3100 - 2900 cal.aBP. The highest sea level occurred around 7300 - 6700 cal.aBP, and biological-morphological zones took their shape during the stage. The later coral reefs developed in ponds, depressions, and developed outwards on both sides of Luhuitou peninsula. The modern coral reefs are developing in out reef flat and reef-front slope. Moreover, the time of high sea levels in the northern South China Sea recorded by coral reefs in the Luhuitou peninsula can link up with that in other parts of South China Sea. That means the high sea levels in the South China Sea during the Holocene, which are relative to the warming climate, have the global background.
基金Supported by Fundamental Research Funds for Guangxi Academy of Sciences(13YJ22SWS20)~~
文摘In summer, Cha No. 39 of 292 bags and 205 of 244 bags were inter- planted with Dendrobium officinale on cultivation bed, respectively, whose yields and biological efficiencies reached 102.46 kg and 103.98%, and 96.77 kg and 113.32%, accordingly. The seedlings of Dendrobium officinale interplanted with Pleurotus os- treatus grew by 2.78 cm during 10 weeks on cultivation beds, and the seedlings grew by 2.68 cm in the cultivation beds without interplanting arrangement. These demonstrated that the interplanting of Dendrobium officinale and Pleurotus ostreatus has none adverse effects on growth of Dendrobium officinale.
