The method of commensurability was used by the authors to predict the great earthquake of magnitude 7.5 that occurred on March 31,2002 in Taiwan 70km away from Hualian. Analyzing the earthquakes of magnitude≥7.0 whic...The method of commensurability was used by the authors to predict the great earthquake of magnitude 7.5 that occurred on March 31,2002 in Taiwan 70km away from Hualian. Analyzing the earthquakes of magnitude≥7.0 which occurred in the Hualian area of Taiwan within the 20th century, the authors discovered that the occurrences of the earthquakes are commensurable. The earthquakes of magnitude 7.6 which occurred in Hualian of Taiwan, on September 20th, 1999 and of magnitude 7.5 which occurred 70 km away from Hualian, on March 31th, 2002 appeared at the commensurable point of K=2 and the period times the golden section, respectively. An extended discussion is carried out on the method of commensurability and its implied physical significance, especially on the contribution of the commensurable periodic extension made by Prof. Weng Wenbo.展开更多
Compliant offshore structures are used for oil exploitation in deep water. Tension leg platform (TLP) is a suitable type for very deep water. The nonlinear dynamic response of TLP under random sea wave load is necessa...Compliant offshore structures are used for oil exploitation in deep water. Tension leg platform (TLP) is a suitable type for very deep water. The nonlinear dynamic response of TLP under random sea wave load is necessary for determining the maximum deformations and stresses. Accurate and reliable responses are needed for optimum design and control of the structure. In this paper nonlinear dynamic analysis of TLP is carried out in both time and frequency domains. The time history of random wave is generated based on Pierson-Moskowitz spectrum and acts on the structure in arbitrary direction. The hydrodynamic forces are calculated using the modified Morison equation according to Airy’s linear wave theory. The power spectral densities (PSDs) of displacements, velocities and accelerations are calculated from nonlinear responses. The focus of the paper is on the comprehen-sive interpretation of the responses of the structure related to wave excitation and structural characteristics. As an example a case study is investigated and numerical results are discussed.展开更多
Dry tree semi is a fast developing technology and becomes more and more appealing to the operators as a solution for producing deepwater reserves. Utilizing a dry tree semi means spending less cost on well mainte-nanc...Dry tree semi is a fast developing technology and becomes more and more appealing to the operators as a solution for producing deepwater reserves. Utilizing a dry tree semi means spending less cost on well mainte-nance and interventions,while the production platform can be integrated and commissioned at quayside. This paper presents a comprehensive overview of various technologies for dry tree semi,such as E-semi,T-semi,paired-column semi and long stroke tensioners. Each dry tree semi concept is briefed in terms of global performance,top tension riser (TTR) tensioner system,quayside integration and feasibility to environment.展开更多
Tension leg platform (TLP) has been one of the most favorite deep-water platform concepts for offshore oil and gas field exploration and development. As of now,a total of 24 TLPs have been installed worldwide with 3 m...Tension leg platform (TLP) has been one of the most favorite deep-water platform concepts for offshore oil and gas field exploration and development. As of now,a total of 24 TLPs have been installed worldwide with 3 more to be installed in the near future and 5 more under design. Most of these installations are in the Gulf of Mexico (GoM). Water depths for these TLP installations range from 150 m to 1 600 m. It is highly expected that China will have her first TLP designed,fabricated,and installed in the very near future. In order to satisfy the need for a unified hull structural design practice,this paper presents the design philosophy of a conventional TLP hull structure with emphases on critical structural components design and analysis methodologies.展开更多
The first floating platform concept design work for South China Sea is undergoing in DMAR's office now. This tension leg platform has potential to become the first advanced floating production platform project. Pr...The first floating platform concept design work for South China Sea is undergoing in DMAR's office now. This tension leg platform has potential to become the first advanced floating production platform project. Project execution is always a challenge for floating system. This paper focuses on the critical elements of project execution for tension leg platform,and studies potential implications to future oil and gas exploration in South China Sea. There are many factors affecting successful execution of floating system project,including technical issues, engineering management,interface management,etc. There are also failure examples of project execution in the industry. The author has participated 28 large detailed projects and has gained extensive experience on floating projects,with ample hands-on project experiences. A detailed tension leg platform project study example and discussions in depth are presented for future project execution in China deepwater development.展开更多
Compliant offshore structures such as spars,tension leg platforms(TLPs) and semi-submersibles have been dramatically improved in recent years due to their capability for deep water operation. Waves are the most import...Compliant offshore structures such as spars,tension leg platforms(TLPs) and semi-submersibles have been dramatically improved in recent years due to their capability for deep water operation. Waves are the most important environmental phenomenon affecting these offshore structures. Estimation of wave forces is vital in offshore structure design. For large compliant offshore platforms,Morrison's equation is not valid anymore and usually diffraction theory is used. In this research,by using the finite difference method,a detailed analysis of the first-order diffraction of monochromatic waves on a large cylinder as a structural element is performed to solve the radiation and diffraction potentials. The results showed that the developed model is a reliable tool to estimate the wave forces and hydrodynamic coefficients on large structure elements when wave diffraction and radiation are considered.展开更多
Transportation of tension leg platform （TLP） structures for a long distance has always been associated with the use of a heavy semi-transport vessel. The requirements of this type of vessel are always special, and t...Transportation of tension leg platform （TLP） structures for a long distance has always been associated with the use of a heavy semi-transport vessel. The requirements of this type of vessel are always special, and their availability is limited. To prepare for the future development of South China Sea deepwater projects, the China Offshore Oil Engineering Corporation has recently built a heavy lift transport vessel-Hai Yang Shi You 278. This semi-submersible vessel has a displacement capacity of 50k DWT, and a breath of 42 meters. Understanding the vessel＇s applicability and preparing it for use in future deepwater projects are becoming imminent needs. This paper reviews the current critical issues associated with TLP transportation and performs detailed analysis of the designed TLP during load-out and transportation. The newly built COOEC transportation vessel HYSY 278 was applied to dry transport of the TLP structure from the COOEC fabrication yard in Qingdao to an oil field in South China Sea. The entire process included the load-out of the TLP structure from the landsite of the fabrication yard, the offloading and float-on of the platform from the vessel, the dry transport of the TLP over a long distance, and the final offloading of the platform. Both hydrodynamic and structure analysis were performed to evaluate the behavior of the transport vessel and TLP structure. Special attention was paid to critical areas associated with the use of this new vessel, along with any potential limitations. The results demonstrate that HYSY 278 can effectively be used for transporting the structure with proper arrangement and well-prepared operation. The procedure and details were presented on the basis of the study results. Special attention was also given to discussion on future use based on the results from the analysis.展开更多
The typical industry practice for Tension Leg Platform （TLP） design focuses on a conventional short-term design recipe, which assumes that an N-year design environment leads to an N-year response. In the response-ba...The typical industry practice for Tension Leg Platform （TLP） design focuses on a conventional short-term design recipe, which assumes that an N-year design environment leads to an N-year response. In the response-based design method, the TLP is designed to withstand N-year responses rather than respond to N-year environmental conditions. In this paper, we present an overview and a general procedure for the response-based design method and use a case study to compare the critical TLP responses between the two methods. The results of our comparison show that the conventional short-term design method often contains an element of conservatism and that the response-based design method can reduce the design conditions and thereby achieve cost savings.展开更多
Tendons vertically moor Tension-Leg Platforms （TLPs）, thus, a deep understanding of physical tendon stresses requires the determination of the total axial deformation of the tendons, which is a combination of the he...Tendons vertically moor Tension-Leg Platforms （TLPs）, thus, a deep understanding of physical tendon stresses requires the determination of the total axial deformation of the tendons, which is a combination of the heave, pitch, and surging responses. The vertical motion of the lateral sides of the TLP is coupled with surge and constitutes a portion of the pitch motion. Tendons are connected to the sides of the TLP; hence, the total displacement of the lateral sides is related to the total deformation of the tendons and the total axial stress. Therefore, investigating the total vertical response at the sides of the TLP is essential. The coupling between various degrees of freedom is not considered in the Response Amplitude Operator （RAO）. Therefore, in frequency domain analysis, the estimated vertical RAO is incomplete. Also, in the time domain, only the heave motion at the center of TLP is typically studied; this problem needs to be addressed. In this paper, we investigate the portion of the pitch motion in the vertical response at the sides of the TLP in both the frequency and time domains. Numerical results demonstrate a significant effect of the pitch motion in the vertical motion of the edges of the TLP in some period ranges.展开更多
In a typical tension leg platform (TLP) design,the top tension factor (TTF),measuring the top tension of a top tensioned riser (TTR) relative to its submerged weight in water,is one of the most important design parame...In a typical tension leg platform (TLP) design,the top tension factor (TTF),measuring the top tension of a top tensioned riser (TTR) relative to its submerged weight in water,is one of the most important design parameters that has to be specified properly. While a very small TTF may lead to excessive vortex induced vibration (VIV),clashing issues and possible compression close to seafloor,an unnecessarily high TTF may translate into excessive riser cost and vessel payload,and even has impacts on the TLP sizing and design in general. In the process of a production TTR design,it is found that its outer casing can be subjected to compression in a worst-case scenario with some extreme metocean and hardware conditions. The present paper shows how finite element analysis (FEA) models using beam elements and two different software packages (Flexcom and ABAQUS) are constructed to simulate the TTR properly,and especially the pipe-in-pipe effects. An ABAQUS model with hybrid elements (beam elements globally + shell elements locally) can be used to investigate how the outer casing behaves under compression. It is shown for the specified TTR design,even with its outer casing being under some local compression in the worst-case scenario,dynamic buckling would not occur;therefore the TTR design is adequate.展开更多
基金This work was supported by the Nation’s Natural Science Found of China (No.10373017) and the Chinese Astronomical Committee Foundation.
文摘The method of commensurability was used by the authors to predict the great earthquake of magnitude 7.5 that occurred on March 31,2002 in Taiwan 70km away from Hualian. Analyzing the earthquakes of magnitude≥7.0 which occurred in the Hualian area of Taiwan within the 20th century, the authors discovered that the occurrences of the earthquakes are commensurable. The earthquakes of magnitude 7.6 which occurred in Hualian of Taiwan, on September 20th, 1999 and of magnitude 7.5 which occurred 70 km away from Hualian, on March 31th, 2002 appeared at the commensurable point of K=2 and the period times the golden section, respectively. An extended discussion is carried out on the method of commensurability and its implied physical significance, especially on the contribution of the commensurable periodic extension made by Prof. Weng Wenbo.
文摘Compliant offshore structures are used for oil exploitation in deep water. Tension leg platform (TLP) is a suitable type for very deep water. The nonlinear dynamic response of TLP under random sea wave load is necessary for determining the maximum deformations and stresses. Accurate and reliable responses are needed for optimum design and control of the structure. In this paper nonlinear dynamic analysis of TLP is carried out in both time and frequency domains. The time history of random wave is generated based on Pierson-Moskowitz spectrum and acts on the structure in arbitrary direction. The hydrodynamic forces are calculated using the modified Morison equation according to Airy’s linear wave theory. The power spectral densities (PSDs) of displacements, velocities and accelerations are calculated from nonlinear responses. The focus of the paper is on the comprehen-sive interpretation of the responses of the structure related to wave excitation and structural characteristics. As an example a case study is investigated and numerical results are discussed.
文摘Dry tree semi is a fast developing technology and becomes more and more appealing to the operators as a solution for producing deepwater reserves. Utilizing a dry tree semi means spending less cost on well mainte-nance and interventions,while the production platform can be integrated and commissioned at quayside. This paper presents a comprehensive overview of various technologies for dry tree semi,such as E-semi,T-semi,paired-column semi and long stroke tensioners. Each dry tree semi concept is briefed in terms of global performance,top tension riser (TTR) tensioner system,quayside integration and feasibility to environment.
文摘Tension leg platform (TLP) has been one of the most favorite deep-water platform concepts for offshore oil and gas field exploration and development. As of now,a total of 24 TLPs have been installed worldwide with 3 more to be installed in the near future and 5 more under design. Most of these installations are in the Gulf of Mexico (GoM). Water depths for these TLP installations range from 150 m to 1 600 m. It is highly expected that China will have her first TLP designed,fabricated,and installed in the very near future. In order to satisfy the need for a unified hull structural design practice,this paper presents the design philosophy of a conventional TLP hull structure with emphases on critical structural components design and analysis methodologies.
文摘The first floating platform concept design work for South China Sea is undergoing in DMAR's office now. This tension leg platform has potential to become the first advanced floating production platform project. Project execution is always a challenge for floating system. This paper focuses on the critical elements of project execution for tension leg platform,and studies potential implications to future oil and gas exploration in South China Sea. There are many factors affecting successful execution of floating system project,including technical issues, engineering management,interface management,etc. There are also failure examples of project execution in the industry. The author has participated 28 large detailed projects and has gained extensive experience on floating projects,with ample hands-on project experiences. A detailed tension leg platform project study example and discussions in depth are presented for future project execution in China deepwater development.
文摘Compliant offshore structures such as spars,tension leg platforms(TLPs) and semi-submersibles have been dramatically improved in recent years due to their capability for deep water operation. Waves are the most important environmental phenomenon affecting these offshore structures. Estimation of wave forces is vital in offshore structure design. For large compliant offshore platforms,Morrison's equation is not valid anymore and usually diffraction theory is used. In this research,by using the finite difference method,a detailed analysis of the first-order diffraction of monochromatic waves on a large cylinder as a structural element is performed to solve the radiation and diffraction potentials. The results showed that the developed model is a reliable tool to estimate the wave forces and hydrodynamic coefficients on large structure elements when wave diffraction and radiation are considered.
基金Supported by the State Key Project "Installation Technical Study for Deepwater Floating Structures" under Grant No.2008ZX05026
文摘Transportation of tension leg platform （TLP） structures for a long distance has always been associated with the use of a heavy semi-transport vessel. The requirements of this type of vessel are always special, and their availability is limited. To prepare for the future development of South China Sea deepwater projects, the China Offshore Oil Engineering Corporation has recently built a heavy lift transport vessel-Hai Yang Shi You 278. This semi-submersible vessel has a displacement capacity of 50k DWT, and a breath of 42 meters. Understanding the vessel＇s applicability and preparing it for use in future deepwater projects are becoming imminent needs. This paper reviews the current critical issues associated with TLP transportation and performs detailed analysis of the designed TLP during load-out and transportation. The newly built COOEC transportation vessel HYSY 278 was applied to dry transport of the TLP structure from the COOEC fabrication yard in Qingdao to an oil field in South China Sea. The entire process included the load-out of the TLP structure from the landsite of the fabrication yard, the offloading and float-on of the platform from the vessel, the dry transport of the TLP over a long distance, and the final offloading of the platform. Both hydrodynamic and structure analysis were performed to evaluate the behavior of the transport vessel and TLP structure. Special attention was paid to critical areas associated with the use of this new vessel, along with any potential limitations. The results demonstrate that HYSY 278 can effectively be used for transporting the structure with proper arrangement and well-prepared operation. The procedure and details were presented on the basis of the study results. Special attention was also given to discussion on future use based on the results from the analysis.
文摘The typical industry practice for Tension Leg Platform （TLP） design focuses on a conventional short-term design recipe, which assumes that an N-year design environment leads to an N-year response. In the response-based design method, the TLP is designed to withstand N-year responses rather than respond to N-year environmental conditions. In this paper, we present an overview and a general procedure for the response-based design method and use a case study to compare the critical TLP responses between the two methods. The results of our comparison show that the conventional short-term design method often contains an element of conservatism and that the response-based design method can reduce the design conditions and thereby achieve cost savings.
文摘Tendons vertically moor Tension-Leg Platforms （TLPs）, thus, a deep understanding of physical tendon stresses requires the determination of the total axial deformation of the tendons, which is a combination of the heave, pitch, and surging responses. The vertical motion of the lateral sides of the TLP is coupled with surge and constitutes a portion of the pitch motion. Tendons are connected to the sides of the TLP; hence, the total displacement of the lateral sides is related to the total deformation of the tendons and the total axial stress. Therefore, investigating the total vertical response at the sides of the TLP is essential. The coupling between various degrees of freedom is not considered in the Response Amplitude Operator （RAO）. Therefore, in frequency domain analysis, the estimated vertical RAO is incomplete. Also, in the time domain, only the heave motion at the center of TLP is typically studied; this problem needs to be addressed. In this paper, we investigate the portion of the pitch motion in the vertical response at the sides of the TLP in both the frequency and time domains. Numerical results demonstrate a significant effect of the pitch motion in the vertical motion of the edges of the TLP in some period ranges.
文摘In a typical tension leg platform (TLP) design,the top tension factor (TTF),measuring the top tension of a top tensioned riser (TTR) relative to its submerged weight in water,is one of the most important design parameters that has to be specified properly. While a very small TTF may lead to excessive vortex induced vibration (VIV),clashing issues and possible compression close to seafloor,an unnecessarily high TTF may translate into excessive riser cost and vessel payload,and even has impacts on the TLP sizing and design in general. In the process of a production TTR design,it is found that its outer casing can be subjected to compression in a worst-case scenario with some extreme metocean and hardware conditions. The present paper shows how finite element analysis (FEA) models using beam elements and two different software packages (Flexcom and ABAQUS) are constructed to simulate the TTR properly,and especially the pipe-in-pipe effects. An ABAQUS model with hybrid elements (beam elements globally + shell elements locally) can be used to investigate how the outer casing behaves under compression. It is shown for the specified TTR design,even with its outer casing being under some local compression in the worst-case scenario,dynamic buckling would not occur;therefore the TTR design is adequate.
