The research concentrates mainly on the development of failure process in composite rock-mass through acoustic emission, convergence inspection, stress measurement, subside area measurement, level measurement in the p...The research concentrates mainly on the development of failure process in composite rock-mass through acoustic emission, convergence inspection, stress measurement, subside area measurement, level measurement in the process of stability and safety monitoring as well as inspecting of subside area in composite hard rock. In terms of the modern signal analysis technology, various aspects are discussed. The monitoring result and the stability of rock mass can be synthetically evaluated and inferred, and the location of acoustic origin according to the acoustic emission regularity can be successfully detected. Finally the key factors of the deformation can be inferred from in subside area.展开更多
An orthogonal experiment scheme was designed to investigate the effects of the Cu content,compaction pressure,and sintering temperature on the microstructures and mechanical and thermal properties of(30−50)wt.%Cu/Inva...An orthogonal experiment scheme was designed to investigate the effects of the Cu content,compaction pressure,and sintering temperature on the microstructures and mechanical and thermal properties of(30−50)wt.%Cu/Invar bi-metal matrix composites fabricated via spark plasma sintering(SPS).The results indicated that as the Cu content increased from 30 to 50 wt.%,a continuous Cu network gradually appeared,and the density,thermal conductivity(TC)and coefficient of thermal expansion of the composites noticeably increased,but the tensile strength decreased.The increase in the sintering temperature promoted the Cu/Invar interface diffusion,leading to a reduction in the TC but an enhancement in the tensile strength of the composites.The compaction pressure comprehensively affected the thermal properties of the composites.The 50wt.%Cu/Invar composite sintered at 700℃ and 60 MPa had the highest TC(90.7 W/(m·K)),which was significantly higher than the TCs obtained for most of the previously reported Cu/Invar composites.展开更多
文摘The research concentrates mainly on the development of failure process in composite rock-mass through acoustic emission, convergence inspection, stress measurement, subside area measurement, level measurement in the process of stability and safety monitoring as well as inspecting of subside area in composite hard rock. In terms of the modern signal analysis technology, various aspects are discussed. The monitoring result and the stability of rock mass can be synthetically evaluated and inferred, and the location of acoustic origin according to the acoustic emission regularity can be successfully detected. Finally the key factors of the deformation can be inferred from in subside area.
基金the International Science&Technology Cooperation Program of China(No.2014DFA50860).
文摘An orthogonal experiment scheme was designed to investigate the effects of the Cu content,compaction pressure,and sintering temperature on the microstructures and mechanical and thermal properties of(30−50)wt.%Cu/Invar bi-metal matrix composites fabricated via spark plasma sintering(SPS).The results indicated that as the Cu content increased from 30 to 50 wt.%,a continuous Cu network gradually appeared,and the density,thermal conductivity(TC)and coefficient of thermal expansion of the composites noticeably increased,but the tensile strength decreased.The increase in the sintering temperature promoted the Cu/Invar interface diffusion,leading to a reduction in the TC but an enhancement in the tensile strength of the composites.The compaction pressure comprehensively affected the thermal properties of the composites.The 50wt.%Cu/Invar composite sintered at 700℃ and 60 MPa had the highest TC(90.7 W/(m·K)),which was significantly higher than the TCs obtained for most of the previously reported Cu/Invar composites.
