LOD(Level Of Detail,层次细节)技术是解决大规模地形实时渲染的关键技术之一,通过这种技术可以较好地简化场景的复杂度,减少图形显示的失真度,满足一定的实时性要求。传统的算法将四叉树和LOD技术相结合将大规模数字高程模型数据(DEM)...LOD(Level Of Detail,层次细节)技术是解决大规模地形实时渲染的关键技术之一,通过这种技术可以较好地简化场景的复杂度,减少图形显示的失真度,满足一定的实时性要求。传统的算法将四叉树和LOD技术相结合将大规模数字高程模型数据(DEM)进行分块,并对块内数据按照分辨率的大小分层存储。通过对四叉树的研究,在限制性四叉树的基础上引入预处理算法,提高了地形读取速度,增强了实时显示效果。该算法是基于限制性四叉树的一种高效的规则网格划分方法,内存开销少,降低了CPU的负担。实验结果表明该算法提高了地形导入的效率,能实现大规模地形的实时漫游。展开更多
Based on geomorphologic and digital elevation model(DEM) data, the topographic characteristics of the northwestern edge of the Qinghai-Tibet Plateau are analyzed. Five representative peaks are first determined accordi...Based on geomorphologic and digital elevation model(DEM) data, the topographic characteristics of the northwestern edge of the Qinghai-Tibet Plateau are analyzed. Five representative peaks are first determined according to the topographic profile maps for the ridge and piedmont lines, and then the topographic gradient characteristics are analyzed according to the representative topographic profile acquisition method.Based on the geomorphologic database data, the regions between the ridge and the piedmont lines are divided into four geomorphologic zones; and the topographic characteristics are finally analyzed for the different geomorphologic zones regions using the DEM data. The research results show that from the piedmont to the ridge, there exist four geomorphologic zones: arid, fluvial, periglacial and glacial. The arid has the lowest elevation, topographic gradient, relief and slope characteristics. The fluvial has lower elevation and the highest topographic gradient, but with lower relief and slope characteristics. With higher elevation, the periglcial has lower topographic gradient, but the highest relief and slope characteristics. The glacial has the highest elevation with higher topographic gradient, relief and slope characteristics.展开更多
Although the modified Goldstein filter based on the local signal-to-noise （SNR） has been proved to be superior to the classical Goldstein and Baran filters with more comprehensive filter parameter, its adaptation is...Although the modified Goldstein filter based on the local signal-to-noise （SNR） has been proved to be superior to the classical Goldstein and Baran filters with more comprehensive filter parameter, its adaptation is not always sufficient in the reduction of phase noise. In this work, the local SNR-based Goldstein filter is further developed with the improvements in the definition of the local SNR and the adaption of the filtering patch size. What＇s more, for preventing the loss of the phase signal caused by the excessive filtering, an iteration filtering operation is also introduced in this new algorithm. To evaluate the performance of the proposed algorithm, both a simulated digital elevation model （DEM） interferogram and real SAR deformation interferogram spanning the L＇ Aquila earthquake are carried out. The quantitative results from the simulated and real data reveal that up to 79.5% noises can be reduced by the new filter, indicating 9%-32% improvements over the previous local SNR-based Goldstein filter. This demonstrates that the new filter is not only equipped with sufficient adaption, but also can suppress the phase noise without the sacrifice of the phase signal.展开更多
Availability of digital elevation models （DEMs） of a high quality is becoming more and more important in spatial studies. Standard methods for DEM creation use only intentionally acquired data sources. Two approache...Availability of digital elevation models （DEMs） of a high quality is becoming more and more important in spatial studies. Standard methods for DEM creation use only intentionally acquired data sources. Two approaches which employ various types of data sets for DEM production are proposed： （1） Method of weighted sum of different data sources with morphological enhancement that conflates any additional data sources to principal DEM, and （2） DEM updating methods of modeling absolute and relative temporal changes, considering landslides, earthquakes, quarries, watererosion, building and highway constructions, etc. Spatial modeling of environmental variables concerning both approaches for （a） quality control of data sources, considering regions, （b） pre-processing of data sources, and （c） processing of the final DEM, have been applied. The variables are called rate of karst, morphologic roughness （modeled from slope, profile curvature and elevation）, characteristic features, rate of forestation, hydrological network, and rate of urbanization. Only the variables evidenced as significant were used in spatial modeling to generate homogeneous regions in spatial modeling a-c. The production process uses different regions to define high quality conflation of data sources to the final DEM. The methodology had been confirmed by case studies. The result is an overall high quality DEM with various well-known parameters.展开更多
Automatic generalization of geographic information is the core of multi_scale representation of spatial data,but the scale_dependent generalization methods are far from abundant because of its extreme complicacy.This ...Automatic generalization of geographic information is the core of multi_scale representation of spatial data,but the scale_dependent generalization methods are far from abundant because of its extreme complicacy.This paper puts forward a new consistency model about scale_dependent representations of relief based on wavelet analysis,and discusses the thresholds in the model so as to acquire the continual representations of relief with different details between scales.The model not only meets the need of automatic generalization but also is scale-dependent completely.Some practical examples are given.展开更多
This study aims to provide a predictive vegetation mapping approach based on the spectral data, DEM and Generalized Additive Models (GAMs). GAMs were used as a prediction tool to describe the relationship between vege...This study aims to provide a predictive vegetation mapping approach based on the spectral data, DEM and Generalized Additive Models (GAMs). GAMs were used as a prediction tool to describe the relationship between vegetation and environmental variables, as well as spectral variables. Based on the fitted GAMs model, probability map of species occurrence was generated and then vegetation type of each grid was defined according to the probability of species occurrence. Deviance analysis was employed to test the goodness of curve fitting and drop contribution calculation was used to evaluate the contribution of each predictor in the fitted GAMs models. Area under curve (AUC) of Receiver Operating Characteristic (ROC) curve was employed to assess the results maps of probability. The results showed that: 1) AUC values of the fitted GAMs models are very high which proves that integrating spectral data and environmental variables based on the GAMs is a feasible way to map the vegetation. 2) Prediction accuracy varies with plant community, and community with dense cover is better predicted than sparse plant community. 3) Both spectral variables and environmental variables play an important role in mapping the vegetation. However, the contribution of the same predictor in the GAMs models for different plant communities is different. 4) Insufficient resolution of spectral data, environmental data and confounding effects of land use and other variables which are not closely related to the environmental conditions are the major causes of imprecision.展开更多
文摘LOD(Level Of Detail,层次细节)技术是解决大规模地形实时渲染的关键技术之一,通过这种技术可以较好地简化场景的复杂度,减少图形显示的失真度,满足一定的实时性要求。传统的算法将四叉树和LOD技术相结合将大规模数字高程模型数据(DEM)进行分块,并对块内数据按照分辨率的大小分层存储。通过对四叉树的研究,在限制性四叉树的基础上引入预处理算法,提高了地形读取速度,增强了实时显示效果。该算法是基于限制性四叉树的一种高效的规则网格划分方法,内存开销少,降低了CPU的负担。实验结果表明该算法提高了地形导入的效率,能实现大规模地形的实时漫游。
基金supported by the strategic plan project of science and technology of Institute of Geographic Sciences and Natural Resources Research (Grant No. 2012ZD009)the National Science Technology Support Plan Project (Grant No. 2012BAH28B01-03)+1 种基金the National Natural Science Foundation of China (Grant No. 41171332)the National Science Technology Basic Special Project (Grant No.2011FY110400-2)
文摘Based on geomorphologic and digital elevation model(DEM) data, the topographic characteristics of the northwestern edge of the Qinghai-Tibet Plateau are analyzed. Five representative peaks are first determined according to the topographic profile maps for the ridge and piedmont lines, and then the topographic gradient characteristics are analyzed according to the representative topographic profile acquisition method.Based on the geomorphologic database data, the regions between the ridge and the piedmont lines are divided into four geomorphologic zones; and the topographic characteristics are finally analyzed for the different geomorphologic zones regions using the DEM data. The research results show that from the piedmont to the ridge, there exist four geomorphologic zones: arid, fluvial, periglacial and glacial. The arid has the lowest elevation, topographic gradient, relief and slope characteristics. The fluvial has lower elevation and the highest topographic gradient, but with lower relief and slope characteristics. With higher elevation, the periglcial has lower topographic gradient, but the highest relief and slope characteristics. The glacial has the highest elevation with higher topographic gradient, relief and slope characteristics.
基金Foundation item： Projects（40974006, 40774003） supported by the National Natural Science Foundation of China Project（NCET-08-0570） supported by the Program for New Century Excellent Talents in Universities of China+2 种基金 Proj ect（2011JQ001） supported by the Fundamental Research Funds for the Central Universities of China Project（PolyU 5155/07E） supported by the Research Grants Council （RGC） of the Hong Kong Special Administrative Region, China Project（CX2011B 102） supported by the Doctoral Research Innovation of Hunan Province, China
文摘Although the modified Goldstein filter based on the local signal-to-noise （SNR） has been proved to be superior to the classical Goldstein and Baran filters with more comprehensive filter parameter, its adaptation is not always sufficient in the reduction of phase noise. In this work, the local SNR-based Goldstein filter is further developed with the improvements in the definition of the local SNR and the adaption of the filtering patch size. What＇s more, for preventing the loss of the phase signal caused by the excessive filtering, an iteration filtering operation is also introduced in this new algorithm. To evaluate the performance of the proposed algorithm, both a simulated digital elevation model （DEM） interferogram and real SAR deformation interferogram spanning the L＇ Aquila earthquake are carried out. The quantitative results from the simulated and real data reveal that up to 79.5% noises can be reduced by the new filter, indicating 9%-32% improvements over the previous local SNR-based Goldstein filter. This demonstrates that the new filter is not only equipped with sufficient adaption, but also can suppress the phase noise without the sacrifice of the phase signal.
文摘Availability of digital elevation models （DEMs） of a high quality is becoming more and more important in spatial studies. Standard methods for DEM creation use only intentionally acquired data sources. Two approaches which employ various types of data sets for DEM production are proposed： （1） Method of weighted sum of different data sources with morphological enhancement that conflates any additional data sources to principal DEM, and （2） DEM updating methods of modeling absolute and relative temporal changes, considering landslides, earthquakes, quarries, watererosion, building and highway constructions, etc. Spatial modeling of environmental variables concerning both approaches for （a） quality control of data sources, considering regions, （b） pre-processing of data sources, and （c） processing of the final DEM, have been applied. The variables are called rate of karst, morphologic roughness （modeled from slope, profile curvature and elevation）, characteristic features, rate of forestation, hydrological network, and rate of urbanization. Only the variables evidenced as significant were used in spatial modeling to generate homogeneous regions in spatial modeling a-c. The production process uses different regions to define high quality conflation of data sources to the final DEM. The methodology had been confirmed by case studies. The result is an overall high quality DEM with various well-known parameters.
基金ProjectsupportedbytheNationalScienceFoundationofSurveyingandMappingofChina (No .990 1 3) .
文摘Automatic generalization of geographic information is the core of multi_scale representation of spatial data,but the scale_dependent generalization methods are far from abundant because of its extreme complicacy.This paper puts forward a new consistency model about scale_dependent representations of relief based on wavelet analysis,and discusses the thresholds in the model so as to acquire the continual representations of relief with different details between scales.The model not only meets the need of automatic generalization but also is scale-dependent completely.Some practical examples are given.
基金Under the auspices of National Natural Science Foundation of China(No.41001363)
文摘This study aims to provide a predictive vegetation mapping approach based on the spectral data, DEM and Generalized Additive Models (GAMs). GAMs were used as a prediction tool to describe the relationship between vegetation and environmental variables, as well as spectral variables. Based on the fitted GAMs model, probability map of species occurrence was generated and then vegetation type of each grid was defined according to the probability of species occurrence. Deviance analysis was employed to test the goodness of curve fitting and drop contribution calculation was used to evaluate the contribution of each predictor in the fitted GAMs models. Area under curve (AUC) of Receiver Operating Characteristic (ROC) curve was employed to assess the results maps of probability. The results showed that: 1) AUC values of the fitted GAMs models are very high which proves that integrating spectral data and environmental variables based on the GAMs is a feasible way to map the vegetation. 2) Prediction accuracy varies with plant community, and community with dense cover is better predicted than sparse plant community. 3) Both spectral variables and environmental variables play an important role in mapping the vegetation. However, the contribution of the same predictor in the GAMs models for different plant communities is different. 4) Insufficient resolution of spectral data, environmental data and confounding effects of land use and other variables which are not closely related to the environmental conditions are the major causes of imprecision.
