Surface notches lower the stiffness of laminated strips, so they lower the buckling loads of the laminated strips, too. In this paper a new method is proposed to predict the buckling loads of the laminated strips with...Surface notches lower the stiffness of laminated strips, so they lower the buckling loads of the laminated strips, too. In this paper a new method is proposed to predict the buckling loads of the laminated strips with a surface notch. The theoretical and experimental results show that the buckling loads decrease as the depth or width of the surface notches increase; when the stacking sequence of the laminated strips is [0°/0°/+ θ/-θ/0°/0°/+θ/-θ] s , the buckling load decrease as θ increases. It proves that the method is reliable and significant.展开更多
A new physical current-voltage model for polysilicon thin-film transistors （poly-Si TFTs） is presented. Taking the V-shaped exponential distribution of trap states density into consideration,explicit calculation of ...A new physical current-voltage model for polysilicon thin-film transistors （poly-Si TFTs） is presented. Taking the V-shaped exponential distribution of trap states density into consideration,explicit calculation of surface potential is derived using the Lambert W function, which greatly improves computational efficiency and is critical in circuit simulation. Based on the exponential density of trap states and the calculated surface potential, the drain current characteristics of the subthreshold and the strong inversion region are predicted. A complete and unique drain current expression, including kink effect, is deduced. The model and the experimental data agree well over a wide range of channel lengths and operational regions.展开更多
The structure, electrostatic properties, and Raman spectra of aflatoxin B1 （AFB1） and AFB1-Ag complex are studied by density functional theory with B3LYP/6- 311G（d,p）/Lan12dz basis set. The results show that the s...The structure, electrostatic properties, and Raman spectra of aflatoxin B1 （AFB1） and AFB1-Ag complex are studied by density functional theory with B3LYP/6- 311G（d,p）/Lan12dz basis set. The results show that the surface-enhanced Raman scattering （SERS） and pre-resonance Raman spectra of AFB1-Ag complex strongly depend on the adsorption site and the excitation wavelength found to enhance 102-103 order compared to of the incident light. The SERS factors are normal Raman spectrum of AFB1 molecule due to the larger static polarizabilities of the AFB1-Ag complex, which directly results in the stronger chemical enhancement in SERS spectra. The pre-resonance Raman spectra of AFB1-Ag complex are explored at 266, 482, 785, and 1064 nm incident light wavelength, in which the enhancement factors are about 10^2-10^4, mainly caused by the charge-transfer excitation resonance. The vibrational modes are analyzed to explain the relationship between the vibrational direction and the enhanced Raman intensities.展开更多
An essential step for the realization of free-form surface structures is to create an efficient structural gird that satisfies not only the architectural aesthetics,but also the structural performance.Employing the ma...An essential step for the realization of free-form surface structures is to create an efficient structural gird that satisfies not only the architectural aesthetics,but also the structural performance.Employing the main stress trajectories as the representation of force flows on a free-form surface,an automatic grid generation approach is proposed for the architectural design.The algorithm automatically plots the main stress trajectories on a 3D free-form surface,and adopts a modified advancing front meshing technique to generate the structural grid.Based on the proposed algorithm,an automatic grid generator named "St-Surmesh" is developed for the practical architectural design of free-form surface structure.The surface geometry of one of the Sun Valleys in Expo Axis for the Expo Shanghai 2010 is selected as a numerical example for validating the proposed approach.Comparative studies are performed to demonstrate how different structural grids affect the design of a free-form surface structure.展开更多
Curvatures are important geometric attributes of surfaces. There are many applications that require as a first step the accurate estimation of curvatures at arbitrary vertices on a triangulated surface. Chen and Schmi...Curvatures are important geometric attributes of surfaces. There are many applications that require as a first step the accurate estimation of curvatures at arbitrary vertices on a triangulated surface. Chen and Schmitt (1992) and Taubin (1995) presented two simple methods to estimate principal curvatures. They used circular arcs to approximate the normal curvature. We find this may cause large error in some cases. In this paper, we describe a more accurate method to estimate the normal curvature, and present a novel algorithm to estimate principal curvatures by simplifying the Chen and Schmitt’s method. Some comparison results are also shown in this paper.展开更多
Based on the distribution characteristic of magnetic field along the polish wheel,the four-axis linkage technique is advanced to replace a standard five-axis one to figure low-gradient optical surfaces with a raster t...Based on the distribution characteristic of magnetic field along the polish wheel,the four-axis linkage technique is advanced to replace a standard five-axis one to figure low-gradient optical surfaces with a raster tool-path in magnetorheological finishing(MRF).After introducing the fundaments of such simplification,the figuring reachability of a four-axis system for the low-gradient optics was theoretically analyzed.Further validation including magnetic field intensity and influence function characteristic was performed to establish its application.To demonstrate the correctness,feasibility and applicability of such technique,a K4 spherical part was figured by two iterations of MRF with surface form error improved to 0.219λPV and 0.027λRMS.Meanwhile,the surface roughness was also improved a lot in MRF process.These theoretical analyses and experimental results both indicate that high form accuracy and excellent surface quality can be obtained by using the four-axis linkage technique in the process of figuring low-gradient optical elements,and the four-axis linkage system undoubtedly is much more easy to control and much more economical.展开更多
Understanding the relationship between landscape pattems and ecological processes has been a central yet challenging research theme in landscape ecology. Over the past decades, many landscape metrics have been propose...Understanding the relationship between landscape pattems and ecological processes has been a central yet challenging research theme in landscape ecology. Over the past decades, many landscape metrics have been proposed but few directly incorporated ecological processes. In this paper, we developed a landscape index, namely, location-weighted landscape index （LWLI） to highlight the role of landscape type in ecological processes, such as nutrient losses and soil erosion. Within the framework of the Lorenz curve theory, we develop this index by integrating land- scape pattern and point-based measurements at a watershed scale. The index can be used to characterize the contribution of landscape pattern to ecological processes （e.g. nutrient losses） with respect to a specific monitoring point in a watershed. Through a case study on nutrient losses in an agricultural area in northeastern China, we found that nutrient losses tended to be higher for a watershed with a higher LWLI value, and vice versa. It implied that LWLI can be used to evaluate the potential risk of nutrient losses or soil erosion by comparing their values across watersheds. In addition, this index can be extended to characterize ecological processes, such as the effect of landscape pattern on wildlife inhabitation and urban heat island effect. Finally, we discuss several problems that should be paid attention to when applying this index to a heterogeneous landscape site.展开更多
文摘Surface notches lower the stiffness of laminated strips, so they lower the buckling loads of the laminated strips, too. In this paper a new method is proposed to predict the buckling loads of the laminated strips with a surface notch. The theoretical and experimental results show that the buckling loads decrease as the depth or width of the surface notches increase; when the stacking sequence of the laminated strips is [0°/0°/+ θ/-θ/0°/0°/+θ/-θ] s , the buckling load decrease as θ increases. It proves that the method is reliable and significant.
文摘A new physical current-voltage model for polysilicon thin-film transistors （poly-Si TFTs） is presented. Taking the V-shaped exponential distribution of trap states density into consideration,explicit calculation of surface potential is derived using the Lambert W function, which greatly improves computational efficiency and is critical in circuit simulation. Based on the exponential density of trap states and the calculated surface potential, the drain current characteristics of the subthreshold and the strong inversion region are predicted. A complete and unique drain current expression, including kink effect, is deduced. The model and the experimental data agree well over a wide range of channel lengths and operational regions.
基金ACKNOWLEDGMENTS This work was supported by the National Natural Science Foundation of China （No.11174237）, the National Basic Rcsearch Program of China （No.2013CB328904）, and the Application Basic program of Sichuan Province （No.2013JY0035）.
文摘The structure, electrostatic properties, and Raman spectra of aflatoxin B1 （AFB1） and AFB1-Ag complex are studied by density functional theory with B3LYP/6- 311G（d,p）/Lan12dz basis set. The results show that the surface-enhanced Raman scattering （SERS） and pre-resonance Raman spectra of AFB1-Ag complex strongly depend on the adsorption site and the excitation wavelength found to enhance 102-103 order compared to of the incident light. The SERS factors are normal Raman spectrum of AFB1 molecule due to the larger static polarizabilities of the AFB1-Ag complex, which directly results in the stronger chemical enhancement in SERS spectra. The pre-resonance Raman spectra of AFB1-Ag complex are explored at 266, 482, 785, and 1064 nm incident light wavelength, in which the enhancement factors are about 10^2-10^4, mainly caused by the charge-transfer excitation resonance. The vibrational modes are analyzed to explain the relationship between the vibrational direction and the enhanced Raman intensities.
基金Project(51378457)supported by the National Natural Science Foundation of China
文摘An essential step for the realization of free-form surface structures is to create an efficient structural gird that satisfies not only the architectural aesthetics,but also the structural performance.Employing the main stress trajectories as the representation of force flows on a free-form surface,an automatic grid generation approach is proposed for the architectural design.The algorithm automatically plots the main stress trajectories on a 3D free-form surface,and adopts a modified advancing front meshing technique to generate the structural grid.Based on the proposed algorithm,an automatic grid generator named "St-Surmesh" is developed for the practical architectural design of free-form surface structure.The surface geometry of one of the Sun Valleys in Expo Axis for the Expo Shanghai 2010 is selected as a numerical example for validating the proposed approach.Comparative studies are performed to demonstrate how different structural grids affect the design of a free-form surface structure.
基金Project supported by the National Natural Science Foundation of China (No. 10371110) and the National Basic Research Program (973)of China (No. 2004CB318000)
文摘Curvatures are important geometric attributes of surfaces. There are many applications that require as a first step the accurate estimation of curvatures at arbitrary vertices on a triangulated surface. Chen and Schmitt (1992) and Taubin (1995) presented two simple methods to estimate principal curvatures. They used circular arcs to approximate the normal curvature. We find this may cause large error in some cases. In this paper, we describe a more accurate method to estimate the normal curvature, and present a novel algorithm to estimate principal curvatures by simplifying the Chen and Schmitt’s method. Some comparison results are also shown in this paper.
基金Project(91023042)supported by the National Natural Science Foundation of ChinaProject(2011CB013200)supported by the National Basic Research Program of China+1 种基金Project(B090302)supported by the Fund of Innovation,Graduate School of National University of Defense Technology,ChinaProject(CX2009B004)supported by the Hunan Provincial Innovation Foundation for Postgraduate,China
文摘Based on the distribution characteristic of magnetic field along the polish wheel,the four-axis linkage technique is advanced to replace a standard five-axis one to figure low-gradient optical surfaces with a raster tool-path in magnetorheological finishing(MRF).After introducing the fundaments of such simplification,the figuring reachability of a four-axis system for the low-gradient optics was theoretically analyzed.Further validation including magnetic field intensity and influence function characteristic was performed to establish its application.To demonstrate the correctness,feasibility and applicability of such technique,a K4 spherical part was figured by two iterations of MRF with surface form error improved to 0.219λPV and 0.027λRMS.Meanwhile,the surface roughness was also improved a lot in MRF process.These theoretical analyses and experimental results both indicate that high form accuracy and excellent surface quality can be obtained by using the four-axis linkage technique in the process of figuring low-gradient optical elements,and the four-axis linkage system undoubtedly is much more easy to control and much more economical.
基金Under the auspices of Chinese Academy of Sciences (No. KZCX2-YW-421)National Natural Science Foundation of China (No. 40621061, 30570319)
文摘Understanding the relationship between landscape pattems and ecological processes has been a central yet challenging research theme in landscape ecology. Over the past decades, many landscape metrics have been proposed but few directly incorporated ecological processes. In this paper, we developed a landscape index, namely, location-weighted landscape index （LWLI） to highlight the role of landscape type in ecological processes, such as nutrient losses and soil erosion. Within the framework of the Lorenz curve theory, we develop this index by integrating land- scape pattern and point-based measurements at a watershed scale. The index can be used to characterize the contribution of landscape pattern to ecological processes （e.g. nutrient losses） with respect to a specific monitoring point in a watershed. Through a case study on nutrient losses in an agricultural area in northeastern China, we found that nutrient losses tended to be higher for a watershed with a higher LWLI value, and vice versa. It implied that LWLI can be used to evaluate the potential risk of nutrient losses or soil erosion by comparing their values across watersheds. In addition, this index can be extended to characterize ecological processes, such as the effect of landscape pattern on wildlife inhabitation and urban heat island effect. Finally, we discuss several problems that should be paid attention to when applying this index to a heterogeneous landscape site.
