The Tyrannosauridae,which is characterized by specialized pachydont dentition and putative bone-cracking predatory strategies,is one of the most extensively studied theropod lineages.Although tooth replacement pattern...The Tyrannosauridae,which is characterized by specialized pachydont dentition and putative bone-cracking predatory strategies,is one of the most extensively studied theropod lineages.Although tooth replacement patterns,crucial for understanding feeding behaviors,have been thoroughly studied in this group,studies on non-tyrannosaurid tyrannosauroids are relatively scarce.This study utilizes high-resolution CT data to investigate the tooth replacement pattern in two specimens of Guanlong wucaii,a Late Jurassic tyrannosauroid,and provides insights into the evolution of tooth replacement across Tyrannosauroidea.Second-generation replacement teeth,a rarity observed mainly in giant predatory theropods(e.g.some tyrannosaurids),were detected in the dentary dentition of the juvenile Guanlong.Zahnreihen reconstructions display a consistent cephalad alternating tooth replacement pattern in the maxilla and the dentary of both of the examined individuals,with Z-spacing values exceeding 2.0.As Guanlong grows,the Z-spacing value in the maxillary dentition increases,resembling the ontogenetic changes documented in the Tyrannosauridae.Additionally,like Tarbosaurus,Guanlong also displays a discontinuity between the tooth replacement waves at the premaxilla-maxilla boundary.This study thus demonstrates that some tyrannosaurid-like tooth replacement patterns were acquired before the origin of the Tyrannosauridae.展开更多
In order to improve the hydrogen storage kinetics of the Mg2Ni-type alloys, Ni in the alloy was partially substituted with element Co. The Mg2Ni-type Mg2Ni1-xCox （x=0, 0.1, 0.2, 0.3, 0.4） alloys were fabricated by m...In order to improve the hydrogen storage kinetics of the Mg2Ni-type alloys, Ni in the alloy was partially substituted with element Co. The Mg2Ni-type Mg2Ni1-xCox （x=0, 0.1, 0.2, 0.3, 0.4） alloys were fabricated by melt-spinning technique. The structures of the as-spun alloys were characterized by XRD and TEM. The gaseous and electrochemical hydrogen storage kinetics of the alloys was measured. The results show that the substitution of Co for Ni notably enhances the glass forming ability of the Mg2Ni-type alloy. The amorphization degree of the alloys visibly increases with rising of Co content. Furthermore, the substitution of Co for Ni significantly improves the hydrogen storage kinetics of the alloys. With an increase in the amount of Co substitution from 0 to 0.4, the hydrogen absorption saturation ratio of the as-spun （15 m/s） alloy increases from 81.2% to 84.9%, the hydrogen desorption ratio from 17.60% to 64.79%, the hydrogen diffusion coefficient increases from 1.07×10-11 to 2.79×10-11 cm2/s and the limiting current density increases from 46.7 to 191.7 mA/g, respectively.展开更多
The as-cast Mg2Ni-type Mg20–xYxNi10 (x=0, 1, 2, 3 and 4) electrode alloys were prepared by vacuum induction melting. Subsequently, the as-cast alloys were mechanically milled in a planetary-type ball mill. The analys...The as-cast Mg2Ni-type Mg20–xYxNi10 (x=0, 1, 2, 3 and 4) electrode alloys were prepared by vacuum induction melting. Subsequently, the as-cast alloys were mechanically milled in a planetary-type ball mill. The analyses of scanning electron microscopy (SEM), X-ray diffraction (XRD) and transmission electron microscopy (TEM) reveal that nanocrystalline and amorphous structure can be obtained by mechanical milling, and the amount of amorphous phase increases with milling time prolonging. The electrochemical measurements show that the discharge capacity of Y0 alloy increases with milling time prolonging, while that of the Y-substituted alloys has a maximum value in the same condition. The cycle stabilities of the alloys decrease with milling time prolonging. The effect of milling time on the electrochemical kinetics of the alloys is related to Y content. Whenx=0, the high rate discharge ability, diffusion coefficient of hydrogen atom, limiting current density and charge transfer rate all increase with milling time prolonging, but the results are exactly opposite whenx=3.展开更多
Amplified fragment length polymorphism(AFLP)was used to analyze 2 populations: Schima superba Gardn. et Champ. and Castanopsis chinensis Hance. across three different communities representing three succession ...Amplified fragment length polymorphism(AFLP)was used to analyze 2 populations: Schima superba Gardn. et Champ. and Castanopsis chinensis Hance. across three different communities representing three succession stages, in Dinghu Mountain, China. These two were middle succession species in the lower subtropical broad_leaved forest. Four AFLP primer combinations using total 48 individuals of S. superba provided 24, 40, 27 and 27 reliable bands, of which 15, 23, 23 and 16 were polymorphic, respectively. Similarly, total 48 individuals of C. chinensis provided 27, 20, 33 and 39 reliable bands, of which 12, 5, 15 and 13 were polymorphic respectively. These bands were used as presence/absence data to assess the levels of genetic variation and population structure of those species. From average heterozygosity, S. superba possessed higher molecular variation than C. chinensis . Analysis of molecular variance(AMOVA)indicated that most of the genetic variation of S. superba was due to the differences within population(95.99%, P <0.001), with 4.01% ( P <0.001)genetic variation among population. Similarly, AMOVA indicated the most of the genetic variation of C. chinensis was due to the differences within population(75.36%, P <0.001), with 24.64%( P <0.001)genetic variation among communities(24.64%). DCA(Detrended Correspondence Analysis) analysis showed that the individuals of S. superba from the same community did not cluster together, while the individuals of C. chinensis from the same community roughly cluster together. The above results reflected the biological characteristics of the two different species suggesting the significant effect of microenvironment of different community on population differentiation and its relationship of which to forest succession resulted in genetic divergence.展开更多
The partial substitution of M （M=Sm, Nd, Pr） for La was performed in order to ameliorate the electrochemical hydrogen storage performance of RE–Mg–Ni-based A2B7-type electrode alloys. The La0.8–xMxMg0.2Ni3.35Al0....The partial substitution of M （M=Sm, Nd, Pr） for La was performed in order to ameliorate the electrochemical hydrogen storage performance of RE–Mg–Ni-based A2B7-type electrode alloys. The La0.8–xMxMg0.2Ni3.35Al0.1Si0.05 （M=Sm, Nd, Pr;x=0-0.4） electrode alloys were fabricated by casting and annealing and their microstructures were characterized by X-ray diffraction （XRD） and scanning electron microscopy （SEM）. The major phases （La, Mg）2Ni7 with the hexagonal Ce2Ni7-type structure and LaNi5 with the hexagonal CaCu5-type structure make up the basic microstructure of the experimental alloys. The discharge capacities of the as-cast and annealed alloys all gain their maximum values with the M （M=Sm, Nd, Pr） content varying. The electrochemical cycle stability of the as-cast and annealed alloys clearly rises with the M （M=Sm, Nd, Pr） content growing. Furthermore, the electrochemical kinetics of the alloys, including the high rate discharge ability, charge transfer rate, limiting current density and hydrogen diffusion coefficient, all present a increase trend at first and then decrease with the rising of M （M=Sm, Nd, Pr） content.展开更多
The nanocrystalline and amorphous Mg2Ni-type alloys with nominal compositions of Mg2Ni1-xMnx （x=0, 0.1, 0.2, 0.3, 0.4） were synthesized by melt-spinning technique. The spun alloy ribbons with a continuous length, a ...The nanocrystalline and amorphous Mg2Ni-type alloys with nominal compositions of Mg2Ni1-xMnx （x=0, 0.1, 0.2, 0.3, 0.4） were synthesized by melt-spinning technique. The spun alloy ribbons with a continuous length, a thickness of about 30 μm and a width of about 25 mm are obtained. The structures of the as-spun alloy ribbons were characterized by XRD and HRTEM. The electrochemical hydrogen storage characteristics of the as-spun alloy ribbons were measured by an automatic galvanostatic system. The electrochemical impedance spectrums （EIS） were plotted by an electrochemical workstation. The hydrogen diffusion coefficients （D） in the alloys were calculated by virtue of potential-step measurement. The results show that all the as-spun （x=0） alloys hold a typical nanocrystalline structure, whereas the as-spun （x=0.4） alloy displays a nanocrystalline and amorphous structure, confirming that the substitution of Mn for Ni facilitates the glass formation in the Mg2Ni-type alloy. The substitution of Mn for Ni significantly improves the electrochemical hydrogen storage performances of the alloys, involving the discharge capacity and the electrochemical cycle stability. With an increase in the amount of Mn substitution from 0 to 0.4, the discharge capacity of the as-spun （20 m/s） alloy increases from 96.5 to 265.3 mA·h/g, and its capacity retaining rate （S20） at the 20th cycle increases from 31.3% to 70.2%. Furthermore, the high rate dischargeability （HRD）, electrochemical impedance spectrum and potential-step measurements all indicate that the electrochemical kinetics of the alloy electrodes first increases then decreases with raising the amount of Mn substitution.展开更多
The rock matrix bulk modulus or its inverse, the compressive coefficient, is an important input parameter for fluid substitution by the Biot-Gassmann equation in reservoir prediction. However, it is not easy to accura...The rock matrix bulk modulus or its inverse, the compressive coefficient, is an important input parameter for fluid substitution by the Biot-Gassmann equation in reservoir prediction. However, it is not easy to accurately estimate the bulk modulus by using conventional methods. In this paper, we present a new linear regression equation for calculating the parameter. In order to get this equation, we first derive a simplified Gassmann equation by using a reasonable assumption in which the compressive coefficient of the saturated pore fluid is much greater than the rock matrix, and, second, we use the Eshelby- Walsh relation to replace the equivalent modulus of a dry rock in the Gassmann equation. Results from the rock physics analysis of rock sample from a carbonate area show that rock matrix compressive coefficients calculated with water-saturated and dry rock samples using the linear regression method are very close （their error is less than 1%）. This means the new method is accurate and reliable.展开更多
To screen the high efficient mixed culture and understand the bioleaching behaviors of mixed culture for low-grade copper sulfide ore bioleaching,ten mixed cultures were collected and screened from different acid mine...To screen the high efficient mixed culture and understand the bioleaching behaviors of mixed culture for low-grade copper sulfide ore bioleaching,ten mixed cultures were collected and screened from different acid mine drainages obtained from sulfide mines of China.The leaching rate was set as criterion to screen the mixed culture and the metagenomic approach.Community genome array（CGA） was used for analyzing the mixed culture microbial community shift during the bioleaching process.The results indicate that the mixed culture obtained from Yinshan（YS） lead-zinc mine in Dexing of Jiangxi province in China reaches the maximum copper extraction（68.89%） during the one bioleaching period of 24 d.CGA results show that YS culture contains nine kinds of bacteria which are belong to six divisions,and the microbial community structure is changing during the bioleaching process.This provides a good way to accelerate the bioleaching process and reveals the microbial community shift during the bioleaching process.展开更多
Gassmann＇s equations are commonly used for predicting seismic wave velocity in rock physics research.However the input matrix mineral bulk modulus parameters are not accurate,which greatly influences the prediction r...Gassmann＇s equations are commonly used for predicting seismic wave velocity in rock physics research.However the input matrix mineral bulk modulus parameters are not accurate,which greatly influences the prediction reliability.In this paper,combining the Russell fluid factor with the Gassman-Biot-Geertsma equation and introducing the dry-rock Poisson＇s ratio,we propose an effective matrix mineral bulk modulus extraction method.This method can adaptively invert the equivalent matrix mineral bulk modulus to apply the Gassmann equation to fluid substitution of complex carbonate reservoirs and increase the fluid prediction reliability.The verification of the actual material fluid substitution also shows that this method is reliable,efficient,and adaptable.展开更多
文摘The Tyrannosauridae,which is characterized by specialized pachydont dentition and putative bone-cracking predatory strategies,is one of the most extensively studied theropod lineages.Although tooth replacement patterns,crucial for understanding feeding behaviors,have been thoroughly studied in this group,studies on non-tyrannosaurid tyrannosauroids are relatively scarce.This study utilizes high-resolution CT data to investigate the tooth replacement pattern in two specimens of Guanlong wucaii,a Late Jurassic tyrannosauroid,and provides insights into the evolution of tooth replacement across Tyrannosauroidea.Second-generation replacement teeth,a rarity observed mainly in giant predatory theropods(e.g.some tyrannosaurids),were detected in the dentary dentition of the juvenile Guanlong.Zahnreihen reconstructions display a consistent cephalad alternating tooth replacement pattern in the maxilla and the dentary of both of the examined individuals,with Z-spacing values exceeding 2.0.As Guanlong grows,the Z-spacing value in the maxillary dentition increases,resembling the ontogenetic changes documented in the Tyrannosauridae.Additionally,like Tarbosaurus,Guanlong also displays a discontinuity between the tooth replacement waves at the premaxilla-maxilla boundary.This study thus demonstrates that some tyrannosaurid-like tooth replacement patterns were acquired before the origin of the Tyrannosauridae.
基金Projects(50871050,50961009)supported by the National Natural Science Foundation of ChinaProjects(2010ZD05,2011ZD10)supported by Natural Science Foundation of Inner Mongolia,ChinaProject(NJzy08071)supported by High Education Science Research Project of Inner Mongolia,China
文摘In order to improve the hydrogen storage kinetics of the Mg2Ni-type alloys, Ni in the alloy was partially substituted with element Co. The Mg2Ni-type Mg2Ni1-xCox （x=0, 0.1, 0.2, 0.3, 0.4） alloys were fabricated by melt-spinning technique. The structures of the as-spun alloys were characterized by XRD and TEM. The gaseous and electrochemical hydrogen storage kinetics of the alloys was measured. The results show that the substitution of Co for Ni notably enhances the glass forming ability of the Mg2Ni-type alloy. The amorphization degree of the alloys visibly increases with rising of Co content. Furthermore, the substitution of Co for Ni significantly improves the hydrogen storage kinetics of the alloys. With an increase in the amount of Co substitution from 0 to 0.4, the hydrogen absorption saturation ratio of the as-spun （15 m/s） alloy increases from 81.2% to 84.9%, the hydrogen desorption ratio from 17.60% to 64.79%, the hydrogen diffusion coefficient increases from 1.07×10-11 to 2.79×10-11 cm2/s and the limiting current density increases from 46.7 to 191.7 mA/g, respectively.
基金Projects(51161015,51371094)supported by the National Natural Science Foundation of China
文摘The as-cast Mg2Ni-type Mg20–xYxNi10 (x=0, 1, 2, 3 and 4) electrode alloys were prepared by vacuum induction melting. Subsequently, the as-cast alloys were mechanically milled in a planetary-type ball mill. The analyses of scanning electron microscopy (SEM), X-ray diffraction (XRD) and transmission electron microscopy (TEM) reveal that nanocrystalline and amorphous structure can be obtained by mechanical milling, and the amount of amorphous phase increases with milling time prolonging. The electrochemical measurements show that the discharge capacity of Y0 alloy increases with milling time prolonging, while that of the Y-substituted alloys has a maximum value in the same condition. The cycle stabilities of the alloys decrease with milling time prolonging. The effect of milling time on the electrochemical kinetics of the alloys is related to Y content. Whenx=0, the high rate discharge ability, diffusion coefficient of hydrogen atom, limiting current density and charge transfer rate all increase with milling time prolonging, but the results are exactly opposite whenx=3.
基金TheNationalNaturalScienceFoundationofChina (No .39670 1 36) PhDFund (No .980 5580 8)ofMinistryofEducationP .R .China Center
文摘Amplified fragment length polymorphism(AFLP)was used to analyze 2 populations: Schima superba Gardn. et Champ. and Castanopsis chinensis Hance. across three different communities representing three succession stages, in Dinghu Mountain, China. These two were middle succession species in the lower subtropical broad_leaved forest. Four AFLP primer combinations using total 48 individuals of S. superba provided 24, 40, 27 and 27 reliable bands, of which 15, 23, 23 and 16 were polymorphic, respectively. Similarly, total 48 individuals of C. chinensis provided 27, 20, 33 and 39 reliable bands, of which 12, 5, 15 and 13 were polymorphic respectively. These bands were used as presence/absence data to assess the levels of genetic variation and population structure of those species. From average heterozygosity, S. superba possessed higher molecular variation than C. chinensis . Analysis of molecular variance(AMOVA)indicated that most of the genetic variation of S. superba was due to the differences within population(95.99%, P <0.001), with 4.01% ( P <0.001)genetic variation among population. Similarly, AMOVA indicated the most of the genetic variation of C. chinensis was due to the differences within population(75.36%, P <0.001), with 24.64%( P <0.001)genetic variation among communities(24.64%). DCA(Detrended Correspondence Analysis) analysis showed that the individuals of S. superba from the same community did not cluster together, while the individuals of C. chinensis from the same community roughly cluster together. The above results reflected the biological characteristics of the two different species suggesting the significant effect of microenvironment of different community on population differentiation and its relationship of which to forest succession resulted in genetic divergence.
基金Projects(51161015,51371094)supported by the National Natural Science Foundations of China
文摘The partial substitution of M （M=Sm, Nd, Pr） for La was performed in order to ameliorate the electrochemical hydrogen storage performance of RE–Mg–Ni-based A2B7-type electrode alloys. The La0.8–xMxMg0.2Ni3.35Al0.1Si0.05 （M=Sm, Nd, Pr;x=0-0.4） electrode alloys were fabricated by casting and annealing and their microstructures were characterized by X-ray diffraction （XRD） and scanning electron microscopy （SEM）. The major phases （La, Mg）2Ni7 with the hexagonal Ce2Ni7-type structure and LaNi5 with the hexagonal CaCu5-type structure make up the basic microstructure of the experimental alloys. The discharge capacities of the as-cast and annealed alloys all gain their maximum values with the M （M=Sm, Nd, Pr） content varying. The electrochemical cycle stability of the as-cast and annealed alloys clearly rises with the M （M=Sm, Nd, Pr） content growing. Furthermore, the electrochemical kinetics of the alloys, including the high rate discharge ability, charge transfer rate, limiting current density and hydrogen diffusion coefficient, all present a increase trend at first and then decrease with the rising of M （M=Sm, Nd, Pr） content.
基金Project (2007AA03Z227) supported by the High-tech Research and Development Program of ChinaProjects (50871050, 50701011) supported by the National Natural Science Foundation of China+1 种基金Project (200711020703) supported by Natural Science Foundation of Inner Mongolia, ChinaProject (NJzy08071) supported by Higher Education Science Research Project of Inner Mongolia, China
文摘The nanocrystalline and amorphous Mg2Ni-type alloys with nominal compositions of Mg2Ni1-xMnx （x=0, 0.1, 0.2, 0.3, 0.4） were synthesized by melt-spinning technique. The spun alloy ribbons with a continuous length, a thickness of about 30 μm and a width of about 25 mm are obtained. The structures of the as-spun alloy ribbons were characterized by XRD and HRTEM. The electrochemical hydrogen storage characteristics of the as-spun alloy ribbons were measured by an automatic galvanostatic system. The electrochemical impedance spectrums （EIS） were plotted by an electrochemical workstation. The hydrogen diffusion coefficients （D） in the alloys were calculated by virtue of potential-step measurement. The results show that all the as-spun （x=0） alloys hold a typical nanocrystalline structure, whereas the as-spun （x=0.4） alloy displays a nanocrystalline and amorphous structure, confirming that the substitution of Mn for Ni facilitates the glass formation in the Mg2Ni-type alloy. The substitution of Mn for Ni significantly improves the electrochemical hydrogen storage performances of the alloys, involving the discharge capacity and the electrochemical cycle stability. With an increase in the amount of Mn substitution from 0 to 0.4, the discharge capacity of the as-spun （20 m/s） alloy increases from 96.5 to 265.3 mA·h/g, and its capacity retaining rate （S20） at the 20th cycle increases from 31.3% to 70.2%. Furthermore, the high rate dischargeability （HRD）, electrochemical impedance spectrum and potential-step measurements all indicate that the electrochemical kinetics of the alloy electrodes first increases then decreases with raising the amount of Mn substitution.
基金supported by the National Nature Science Foundation of China (Grant Noss 40739907 and 40774064)National Science and Technology Major Project (Grant No. 2008ZX05025-003)
文摘The rock matrix bulk modulus or its inverse, the compressive coefficient, is an important input parameter for fluid substitution by the Biot-Gassmann equation in reservoir prediction. However, it is not easy to accurately estimate the bulk modulus by using conventional methods. In this paper, we present a new linear regression equation for calculating the parameter. In order to get this equation, we first derive a simplified Gassmann equation by using a reasonable assumption in which the compressive coefficient of the saturated pore fluid is much greater than the rock matrix, and, second, we use the Eshelby- Walsh relation to replace the equivalent modulus of a dry rock in the Gassmann equation. Results from the rock physics analysis of rock sample from a carbonate area show that rock matrix compressive coefficients calculated with water-saturated and dry rock samples using the linear regression method are very close （their error is less than 1%）. This means the new method is accurate and reliable.
基金Project(50774102)supported by the National Natural Science Foundation of ChinaProject(2004CB619204)supported by the National Basic Research Program of China
文摘To screen the high efficient mixed culture and understand the bioleaching behaviors of mixed culture for low-grade copper sulfide ore bioleaching,ten mixed cultures were collected and screened from different acid mine drainages obtained from sulfide mines of China.The leaching rate was set as criterion to screen the mixed culture and the metagenomic approach.Community genome array（CGA） was used for analyzing the mixed culture microbial community shift during the bioleaching process.The results indicate that the mixed culture obtained from Yinshan（YS） lead-zinc mine in Dexing of Jiangxi province in China reaches the maximum copper extraction（68.89%） during the one bioleaching period of 24 d.CGA results show that YS culture contains nine kinds of bacteria which are belong to six divisions,and the microbial community structure is changing during the bioleaching process.This provides a good way to accelerate the bioleaching process and reveals the microbial community shift during the bioleaching process.
基金sponsored by National Natural Science Foundation of China(Grant No.40904035)
文摘Gassmann＇s equations are commonly used for predicting seismic wave velocity in rock physics research.However the input matrix mineral bulk modulus parameters are not accurate,which greatly influences the prediction reliability.In this paper,combining the Russell fluid factor with the Gassman-Biot-Geertsma equation and introducing the dry-rock Poisson＇s ratio,we propose an effective matrix mineral bulk modulus extraction method.This method can adaptively invert the equivalent matrix mineral bulk modulus to apply the Gassmann equation to fluid substitution of complex carbonate reservoirs and increase the fluid prediction reliability.The verification of the actual material fluid substitution also shows that this method is reliable,efficient,and adaptable.
