In order to achieve the dual goals of complete deamination of magnesium ammonium phosphate（MAP） and ensure the pyrolysate＇s good removal properties towards ammonia-nitrogen, a temperature-programmed method for the ...In order to achieve the dual goals of complete deamination of magnesium ammonium phosphate（MAP） and ensure the pyrolysate＇s good removal properties towards ammonia-nitrogen, a temperature-programmed method for the pyrolysis of MAP was studied, as well as the thermodynamic and kinetic processes involved in the removal reaction system between MAP pyrolysate and aqueous ammonium. It was found that the pyrolysis method and pyrolysis final temperature had significant effects on the MAP pyrolysate＇s removal properties towards aqueous ammonium, and the following conditions were deemed to be more appropriate： pyrolysis final temperature and heating rate at 180 ℃ and 5 ℃/min, respectively, and a pH level of 9.5 for the removal reaction system. The resultant ammonium removal capacity by the MAP pyrolysate was 95.62 mg/g. After 120 min, the removal rate with an initial concentration of 1000 mg/L was 82%. The kinetic and thermodynamic results indicated that the removal of aqueous ammonium by MAP pyrolysate was the exchange process between H^＋ and NH4^＋ via MAP precipitation. The kinetics complied with the Lagergren quasi second-order model with an equilibrium time of 120 min, while the isothermal curves complied with the Freundlich model.展开更多
High-purity magnesium ammonium phosphate （MAP） was precipitated by controlling pH value of the reaction system of 9.0-9.5. The thermal decomposition behavior of MAP and the adsorption properties of its pyrolysis pro...High-purity magnesium ammonium phosphate （MAP） was precipitated by controlling pH value of the reaction system of 9.0-9.5. The thermal decomposition behavior of MAP and the adsorption properties of its pyrolysis products toward ammonia-nitrogen were also studied by XRD, SEM, TGA-DTA and FT-IR methods. The results indicated that high-purity MAP was obtained at pH value of 9.0-9.5. Upon heating to 100-120℃ for 120 min, MAP was thermally decomposed, losing water and ammonia concomitantly with a reduction in grain size and crystallinity. The capacity of pyrolysis products for ammonia nitrogen adsorption reached 72.5 mg/g, with a removal rate of up to 95% from an 800 mg/L solution. The characteristic diffraction peaks corresponding to MAP mainly appeared in their XRD patterns after adsorption of ammonia nitrogen. The pyrolysis products of MAP at 100-120 ℃ could be recycling-used as the chemical treatment regents of ammonia nitrogen in the practical application.展开更多
Tacrine(9-amino-1,2,3,4-tetrahydroacridine) was synthesized using isatin as the raw material through isatin 3-oxime and 2-aminobenzonitrile with a yield of 68.1%. Sodium methoxide was used as the catalyst in the therm...Tacrine(9-amino-1,2,3,4-tetrahydroacridine) was synthesized using isatin as the raw material through isatin 3-oxime and 2-aminobenzonitrile with a yield of 68.1%. Sodium methoxide was used as the catalyst in the thermal decomposition of isatin 3-oxime, and tetramethylene sulfone was used as the solvent. The structure of tacrine was determined by IR, 1H NMR, MS and elemental analysis.展开更多
A magnetic CoFe2O4/Cd S nanocomposite was prepared via one-step hydrothermal decomposition of cadmium diethanoldithiocarbamate complex on the surface of CoFe2O4 nanoparticles at a low temperature of 200 ℃.The nanocom...A magnetic CoFe2O4/Cd S nanocomposite was prepared via one-step hydrothermal decomposition of cadmium diethanoldithiocarbamate complex on the surface of CoFe2O4 nanoparticles at a low temperature of 200 ℃.The nanocomposite was characterised by X-ray diffraction（XRD）,Fourier transform infrared spectroscopy（FT-IR）,scanning electron microscopy,energy-dispersive X-ray spectroscopy（EDX）,UV-visible spectroscopy,transmission electron microscopy（TEM）,N2 gas sorption analysis,X-ray photoelectron spectroscopy（XPS）,and vibrating sample magnetometry.The FT-IR,XRD,EDX and XPS results confirmed the formation of the CoFe2O4/Cd S nanocomposite.Based on the TEM analysis,the CoFe2O4/Cd S nanocomposite constituted nearly uniform,sphere-like nanoparticles of ～20 nm in size.The optical absorption spectrum of the CoFe2O4/Cd S nanocomposite displayed a band gap of 2.21 e V,which made it a suitable candidate for application in sono/photocatalytic degradation of organic pollutants.Accordingly,the sonocatalytic activity of the CoFe2O4/Cd S nanocomposite was evaluated towards the H2O2-assisted degradation of methylene blue,rhodamine B,and methyl orange under ultrasonic irradiation.The nanocomposite displayed excellent sonocatalytic activity towards the degradation of all dyes examined—the dyes were completely decomposed within 5–9 min.Furthermore,a comparison study revealed that the CoFe2O4/Cd S nanocomposite is a more efficient sonocatalyst than pure Cd S;thus,adopting the nanocomposite approach is an excellent means to improve the sonoactivity of Cd S.Moreover,the magnetic properties displayed by the CoFe2O4/Cd S nanocomposite allow easy retrieval of the catalyst from the reaction mixture for subsequent uses.展开更多
An easy method for preparing CuO nanoparticles incorporated in a mesoporous structure was presented based on the thermal decomposition of a copper complex. The novel copper coordination compound of [Cu(anic)<sub>...An easy method for preparing CuO nanoparticles incorporated in a mesoporous structure was presented based on the thermal decomposition of a copper complex. The novel copper coordination compound of [Cu(anic)<sub>2</sub>]·0.75H<sub>2</sub>O (anic= 2-aminonicotinate) with the microflake morphology was synthesized through the reaction of 2-aminonicotinic acid (Hanic) and copper(II) nitrate. Using elemental analysis and Fourier transform infrared (FTIR) spectroscopy, the chemical composition of CuC<sub>12</sub>H<sub>11.5</sub>N<sub>4</sub>O<sub>4.75</sub> was proposed. Calcination process at 550 °C for 4 h transformed the microflakes into CuO nanoparticles incorporated in a mesoporous structure. The FTIR peaks assigned to 2-aminonicotinate were completely removed after calcination, confirming CuO formation. X-ray diffraction (XRD) analysis also confirmed the generation of pure and crystalline CuO. SEM showed CuO nanoparticles with the average diameter of 75 nm. The diffuse reflectance spectrum (DRS) of the CuO nanoparticles showed a band gap energy of −1.58 eV. The degradation efficiency toward rhodamine B was almost 100 % after 5 h illumination when both CuO and H<sub>2</sub>O<sub>2</sub> were utilized. The results show that the product can be used as an efficient photocatalyst for water treatment.展开更多
In this work, pyrolysis photoionization time-of-flight mass spectrometry （Py-PI-TOFMS） was applied to study the behavior of ammonia poisoning on H-form ultra stable Y （HUSY） zeolite for the catalytic pyrolysis of ...In this work, pyrolysis photoionization time-of-flight mass spectrometry （Py-PI-TOFMS） was applied to study the behavior of ammonia poisoning on H-form ultra stable Y （HUSY） zeolite for the catalytic pyrolysis of polypropylene （PP）. Firstly, ammonia poisoning on HUSY was performed to obtain the suitable catalysts with different strength and amounts of acid sites. Secondly, online photoionization mass spectra for the pyrolysis products of PP and HUSY with various acid strength were recorded at different pyrolysis temperatures. Finally, the formation curves of various pyrolysates of PP/HUSY with the increase of temperature were determined. Our results indicate that the formation temperatures, yields and selectivity of the pyrolysis products of PP demonstrate obvious relationship with the acid strength of HUSY.展开更多
基金Project(ZDSY20120619093952884)supported by Shenzhen Strategic New Industry Development,China
文摘In order to achieve the dual goals of complete deamination of magnesium ammonium phosphate（MAP） and ensure the pyrolysate＇s good removal properties towards ammonia-nitrogen, a temperature-programmed method for the pyrolysis of MAP was studied, as well as the thermodynamic and kinetic processes involved in the removal reaction system between MAP pyrolysate and aqueous ammonium. It was found that the pyrolysis method and pyrolysis final temperature had significant effects on the MAP pyrolysate＇s removal properties towards aqueous ammonium, and the following conditions were deemed to be more appropriate： pyrolysis final temperature and heating rate at 180 ℃ and 5 ℃/min, respectively, and a pH level of 9.5 for the removal reaction system. The resultant ammonium removal capacity by the MAP pyrolysate was 95.62 mg/g. After 120 min, the removal rate with an initial concentration of 1000 mg/L was 82%. The kinetic and thermodynamic results indicated that the removal of aqueous ammonium by MAP pyrolysate was the exchange process between H^＋ and NH4^＋ via MAP precipitation. The kinetics complied with the Lagergren quasi second-order model with an equilibrium time of 120 min, while the isothermal curves complied with the Freundlich model.
基金Project(ZDSY20120619093952884)supported by Shenzhen Strategic New Industry Development,China
文摘High-purity magnesium ammonium phosphate （MAP） was precipitated by controlling pH value of the reaction system of 9.0-9.5. The thermal decomposition behavior of MAP and the adsorption properties of its pyrolysis products toward ammonia-nitrogen were also studied by XRD, SEM, TGA-DTA and FT-IR methods. The results indicated that high-purity MAP was obtained at pH value of 9.0-9.5. Upon heating to 100-120℃ for 120 min, MAP was thermally decomposed, losing water and ammonia concomitantly with a reduction in grain size and crystallinity. The capacity of pyrolysis products for ammonia nitrogen adsorption reached 72.5 mg/g, with a removal rate of up to 95% from an 800 mg/L solution. The characteristic diffraction peaks corresponding to MAP mainly appeared in their XRD patterns after adsorption of ammonia nitrogen. The pyrolysis products of MAP at 100-120 ℃ could be recycling-used as the chemical treatment regents of ammonia nitrogen in the practical application.
文摘Tacrine(9-amino-1,2,3,4-tetrahydroacridine) was synthesized using isatin as the raw material through isatin 3-oxime and 2-aminobenzonitrile with a yield of 68.1%. Sodium methoxide was used as the catalyst in the thermal decomposition of isatin 3-oxime, and tetramethylene sulfone was used as the solvent. The structure of tacrine was determined by IR, 1H NMR, MS and elemental analysis.
基金the Lorestan University and Iran Nanotechnology Initiative Council (INIC) for their financial support
文摘A magnetic CoFe2O4/Cd S nanocomposite was prepared via one-step hydrothermal decomposition of cadmium diethanoldithiocarbamate complex on the surface of CoFe2O4 nanoparticles at a low temperature of 200 ℃.The nanocomposite was characterised by X-ray diffraction（XRD）,Fourier transform infrared spectroscopy（FT-IR）,scanning electron microscopy,energy-dispersive X-ray spectroscopy（EDX）,UV-visible spectroscopy,transmission electron microscopy（TEM）,N2 gas sorption analysis,X-ray photoelectron spectroscopy（XPS）,and vibrating sample magnetometry.The FT-IR,XRD,EDX and XPS results confirmed the formation of the CoFe2O4/Cd S nanocomposite.Based on the TEM analysis,the CoFe2O4/Cd S nanocomposite constituted nearly uniform,sphere-like nanoparticles of ～20 nm in size.The optical absorption spectrum of the CoFe2O4/Cd S nanocomposite displayed a band gap of 2.21 e V,which made it a suitable candidate for application in sono/photocatalytic degradation of organic pollutants.Accordingly,the sonocatalytic activity of the CoFe2O4/Cd S nanocomposite was evaluated towards the H2O2-assisted degradation of methylene blue,rhodamine B,and methyl orange under ultrasonic irradiation.The nanocomposite displayed excellent sonocatalytic activity towards the degradation of all dyes examined—the dyes were completely decomposed within 5–9 min.Furthermore,a comparison study revealed that the CoFe2O4/Cd S nanocomposite is a more efficient sonocatalyst than pure Cd S;thus,adopting the nanocomposite approach is an excellent means to improve the sonoactivity of Cd S.Moreover,the magnetic properties displayed by the CoFe2O4/Cd S nanocomposite allow easy retrieval of the catalyst from the reaction mixture for subsequent uses.
基金Iran University of Science and Technology, the Research Council of Sharif University of Technology and Iran Nanotechnology Initiative Council for financial support
文摘An easy method for preparing CuO nanoparticles incorporated in a mesoporous structure was presented based on the thermal decomposition of a copper complex. The novel copper coordination compound of [Cu(anic)<sub>2</sub>]·0.75H<sub>2</sub>O (anic= 2-aminonicotinate) with the microflake morphology was synthesized through the reaction of 2-aminonicotinic acid (Hanic) and copper(II) nitrate. Using elemental analysis and Fourier transform infrared (FTIR) spectroscopy, the chemical composition of CuC<sub>12</sub>H<sub>11.5</sub>N<sub>4</sub>O<sub>4.75</sub> was proposed. Calcination process at 550 °C for 4 h transformed the microflakes into CuO nanoparticles incorporated in a mesoporous structure. The FTIR peaks assigned to 2-aminonicotinate were completely removed after calcination, confirming CuO formation. X-ray diffraction (XRD) analysis also confirmed the generation of pure and crystalline CuO. SEM showed CuO nanoparticles with the average diameter of 75 nm. The diffuse reflectance spectrum (DRS) of the CuO nanoparticles showed a band gap energy of −1.58 eV. The degradation efficiency toward rhodamine B was almost 100 % after 5 h illumination when both CuO and H<sub>2</sub>O<sub>2</sub> were utilized. The results show that the product can be used as an efficient photocatalyst for water treatment.
文摘In this work, pyrolysis photoionization time-of-flight mass spectrometry （Py-PI-TOFMS） was applied to study the behavior of ammonia poisoning on H-form ultra stable Y （HUSY） zeolite for the catalytic pyrolysis of polypropylene （PP）. Firstly, ammonia poisoning on HUSY was performed to obtain the suitable catalysts with different strength and amounts of acid sites. Secondly, online photoionization mass spectra for the pyrolysis products of PP and HUSY with various acid strength were recorded at different pyrolysis temperatures. Finally, the formation curves of various pyrolysates of PP/HUSY with the increase of temperature were determined. Our results indicate that the formation temperatures, yields and selectivity of the pyrolysis products of PP demonstrate obvious relationship with the acid strength of HUSY.
