期刊文献+
共找到9篇文章
< 1 >
每页显示 20 50 100
秦始皇陵出土青铜马车活性连接工艺研究
1
作者 杨欢 《自然科学史研究》 CSSCI CSCD 北大核心 2020年第4期439-452,共14页
在我国青铜时代,青铜器中使用活性连接工艺的种类较少、频率很低,现今相关的工艺研究仍较匮乏。文章在梳理我国青铜时代活性连接工艺源流的基础上,对秦始皇陵出土青铜马车中的多种活性连接工艺进行了分类总结与探讨。研究发现,活性连接... 在我国青铜时代,青铜器中使用活性连接工艺的种类较少、频率很低,现今相关的工艺研究仍较匮乏。文章在梳理我国青铜时代活性连接工艺源流的基础上,对秦始皇陵出土青铜马车中的多种活性连接工艺进行了分类总结与探讨。研究发现,活性连接工艺分为可活动的连接工艺与可拆卸的连接工艺两大类,每一类又可细分为子母扣、活铰、钮环等类型。这些工艺在青铜马车中共计使用逾千次,极大地丰富了青铜时代金属连接的类型,更加全面地展示了秦时精湛的金属工艺。 展开更多
关键词 秦始皇陵 青铜马车 活性连接工艺
下载PDF
毛白杨4-香豆酸:辅酶A连接酶可溶性原核表达及活性检测 被引量:20
2
作者 范丙友 胡诗宇 +1 位作者 陆海 蒋湘宁 《北京林业大学学报》 CAS CSCD 北大核心 2006年第2期1-8,共8页
为了进一步研究毛白杨4CL1的酶学特性,构建了毛白杨4CL1原核表达载体pQE31-4CL1.经IPTG诱导在大肠杆菌中表达了毛白杨4CL1蛋白,SDS-PAGE电泳分析表明该新蛋白的分子量为60kD,与预测值一致.对毛白杨4CL1蛋白在大肠杆菌中的表达体系... 为了进一步研究毛白杨4CL1的酶学特性,构建了毛白杨4CL1原核表达载体pQE31-4CL1.经IPTG诱导在大肠杆菌中表达了毛白杨4CL1蛋白,SDS-PAGE电泳分析表明该新蛋白的分子量为60kD,与预测值一致.对毛白杨4CL1蛋白在大肠杆菌中的表达体系进行了优化,确定IPTG的最佳浓度为0.4mmol/L,诱导时的菌液密度OD600为0.3-0.5,最佳表达时间为2h.37℃下表达的4CL1融合蛋白以包涵体的形式存在,没有生物学活性.当表达温度从37℃降低为28℃时,可溶性的有生物学活性的毛白杨4CL1蛋白诱导表达获得成功,表达量达11%.以耦联有Ni^2+-NTA的琼脂糖为亲和层析填料,金属鳌合亲和柱层析一步纯化获得了电泳纯4CL1蛋白,4CL1蛋白对5种底物的比活性分别为:4-香豆酸3949.0pkat/mg,咖啡酸2214.0pkat/mg,阿魏酸715.0pkat/mg,肉桂酸84.9pkat/mg,而对芥子酸没有生物活性. 展开更多
关键词 毛白杨 4-香豆酸 辅酶A连接 可溶性原核表达 活性
下载PDF
管壳式换热器换热管与管板的特殊连接结构 被引量:2
3
作者 姜红梅 王微 胡玉梅 《纯碱工业》 CAS 2013年第3期25-27,共3页
介绍了在不同工况下的几种换热管与管板的连接型式。外伸角管接头、内角管接头和对接内孔管接头等连接方式,解决了物料在管程冷凝的立式换热器运行中或停车时管程物料的排净问题;止推圈、挡圈和"O"形圈的活性连接结构型式解... 介绍了在不同工况下的几种换热管与管板的连接型式。外伸角管接头、内角管接头和对接内孔管接头等连接方式,解决了物料在管程冷凝的立式换热器运行中或停车时管程物料的排净问题;止推圈、挡圈和"O"形圈的活性连接结构型式解决了换热管采用钛管、管板采用铸铁管板时,换热管与管板不能采用焊接、胀接等传统连接方式的难题,从而降低换热器的制造成本。 展开更多
关键词 换热器 换热管 管接头 活性连接 止推圈 挡圈 “O”形圈 连接
下载PDF
一种新型SUMO E3连接酶CBX4的化学修饰作用 被引量:3
4
作者 朱玥荃 王文恭 薛丽香 《中国生物化学与分子生物学报》 CAS CSCD 北大核心 2016年第2期115-122,共8页
多梳蛋白家族(polycomb group proteins,Pc G)是一类在染色质水平上通过表观遗传修饰抑制靶基因转录的调节因子,它在调节细胞周期、DNA修复、细胞分化、衰老和死亡中起到重要作用。CBX4作为Pc G家族中唯一具有SUMO E3连接酶活性的成员,... 多梳蛋白家族(polycomb group proteins,Pc G)是一类在染色质水平上通过表观遗传修饰抑制靶基因转录的调节因子,它在调节细胞周期、DNA修复、细胞分化、衰老和死亡中起到重要作用。CBX4作为Pc G家族中唯一具有SUMO E3连接酶活性的成员,可以作用于多种底物,包括HIPK2、SIP1、Ct BP、CTCF、Dnmt3a和HIF-1α等。底物的SUMO化修饰依赖于特定的结构基础,而且SUMO化的底物功能也会相应发生改变。同时,CBX4还可以被其它分子,如HIPK2,SENP2等进行磷酸化以及去SUMO化等修饰。本篇综述详细阐述了CBX4对底物的SUMO化修饰、自身被修饰及其生物学功能的变化。 展开更多
关键词 CBX4 SUMO E3连接活性 SUMO化修饰
原文传递
五种技术趋势重塑制造业
5
作者 任祎卓 《物联网技术》 2016年第12期5-5,共1页
工业4.04.0将从根本上改变企业部门的运营方式,采用物联网、先进的数据收集和分析能力、人机协作、添加剂制造、低端或无代码的业务应用程序等措施来提高工厂间的连接灵活性。有望促使生产商提高生产力与产出,创造更大的价值。
关键词 工业4.0 物联网 连接活性
下载PDF
人源解旋酶样转录因子的表达、纯化和功能研究 被引量:1
6
作者 龚晓昕 沈苗苗 +1 位作者 李徐梓超 向嵩 《天津医科大学学报》 2022年第1期35-39,共5页
目的:解旋酶样转录因子(HLTF)在人体细胞的DNA复制压力应对中发挥重要作用,对其结构和功能的研究需要大量、高纯度且折叠正确的蛋白质。方法:通过优化HLTF基因的密码子偏好,构建HLTF蛋白的大肠杆菌表达系统;通过亲和层析、离子交换层析... 目的:解旋酶样转录因子(HLTF)在人体细胞的DNA复制压力应对中发挥重要作用,对其结构和功能的研究需要大量、高纯度且折叠正确的蛋白质。方法:通过优化HLTF基因的密码子偏好,构建HLTF蛋白的大肠杆菌表达系统;通过亲和层析、离子交换层析、凝胶过滤层析等方法纯化HLTF;采用体外实验研究HLTF的生化活性。结果:成功构建HLTF蛋白的大肠杆菌表达系统,通过一个4步的纯化,获得高纯度的HLTF蛋白质,体外功能实验表明大肠杆菌表达的HLTF具有完整的生化活性,提示蛋白折叠正确。本研究发现HLTF的泛素连接酶活性对底物与泛素的连接方式有较大的容忍度。结论:建立了一种高效制备大量、高纯度且折叠正确的HLTF的方法,为深入理解其泛素连接酶活性提供线索,为其结构和功能研究奠定基础。 展开更多
关键词 解旋酶样转录因子 蛋白质表达 蛋白质纯化 泛素连接活性 DNA复制压力应对
下载PDF
Identification of Connection Flexibility Effects Based on Load Testing of a Steel-Concrete Bridge
7
作者 Czeslaw Machelski Robert Toczkiewicz 《Journal of Civil Engineering and Architecture》 2012年第11期1504-1513,共10页
In the case of composite girders, an effective cooperation of both parts of the section is influenced by deformability of connectors. Limited flexural stiffness of welded studs, used commonly in bridge structures, doe... In the case of composite girders, an effective cooperation of both parts of the section is influenced by deformability of connectors. Limited flexural stiffness of welded studs, used commonly in bridge structures, does not provide full interaction of a steel beam and a concrete slab. This changes strain distribution in cross-sections of a composite girder and results in redistribution of internal forces in steel and concrete element. In the paper partial interaction index defined on the basis of a neutral axis position, which can be used for verification of steel-concrete interaction in real bridge structures rather than in specimens is proposed. The range of the index value changes, obtained during load testing of a typical steel-concrete composite beam bridge, is presented. The investigation was carried out on a motorway viaduct, consisting of two parallel structures. During the testing values of strains in girders under static and quasi-static loads were measured. The readings from the gauges were used to determine the index, characterizing composite action of the girders. Results of bridge testing under movable load, changing position along the bridge span is presented and obtained in-situ influence functions of strains and index values are commented in the paper. 展开更多
关键词 Abstract: In the case of composite girders an effective cooperation of both parts of the section is influenced by deformability of connectors. Limited flexural stiffness of welded studs used commonly in bridge structures does not provide full interaction of a steel beam and a concrete slab. This changes strain distribution in cross-sections of a composite girder and results in redistribution of internal forces in steel and concrete element. In the paper partial interaction index defined on the basis of a neutral axis position which can be used for verification of steel-concrete interaction in real bridge structures rather Composite bridge partial interaction
下载PDF
Research on resting spontaneous brain activity and functional connectivity of acupuncture at uterine acupoints
8
作者 YUAN Hang YU Xiaohua +4 位作者 LI Xiang QIN Sijun LIANG Guixiang BAI Tianyu WEI Benzheng 《Digital Chinese Medicine》 2022年第1期59-67,共9页
Objective The resting-state functional magnetic resonance imaging(rs-f MRI)method was used to observe brain activity and its functional connection upon electroacupuncture stimulation at bilateral uterine acupoints(EX-... Objective The resting-state functional magnetic resonance imaging(rs-f MRI)method was used to observe brain activity and its functional connection upon electroacupuncture stimulation at bilateral uterine acupoints(EX-CA1),as well as to investigate the mechanism of acupuncture in the treatment of gynecological diseases.Methods Twenty-two healthy female subjects were stimulated by electroacupuncture at bilateral uterine acupoints;rs-f MRI data of the brain were acquired and standardized.Degree centrality(DC),amplitude of low-frequency fluctuation(ALFF),and regional homogeneity(ReHo)were used to analyze local spontaneous brain activity via acupuncture.An independent component analysis was used to evaluate the functional connectivity of the resting brain networks after acupuncture.Results Analytical results showed that the neural activity intensity of the precuneus lobe,orbitofrontal cortex,lingual gyrus,amygdala,and posterior central gyrus decreased after acupuncture(voxel P<0.001,cluster P<0.05).Functional connectivity analysis revealed weakened auditory and right frontal-parietal networks(voxel P<0.001,cluster P<0.05),enhanced visual network(voxel P<0.001,cluster P<0.05),and synergistic auditory network and hypothalamic-pituitary system.Conclusion Significant differences in neural activity and functional connectivity in specific brain regions were observed after acupuncture intervention at uterine acupoints;the hypothalamic-pituitary system also showed various active states in different brain regions.It is speculated that the effective mechanism of acupuncture at uterine acupoints is related to the regulation of reproductive hormones,emotional changes,and somatic sensations.Therefore,the methods used in this study could clarify the neural mechanism of uterine-point acupuncture in the treatment of gynecological diseases and may serve as a reference for other studies pertaining to acupuncture. 展开更多
关键词 Uterine acupoints ACUPUNCTURE Functional magnetic resonance imaging Local spontaneous brain activity analysis Resting state Functional connectivity
下载PDF
Design for structural flexibility using connected morphable components based topology optimization 被引量:3
9
作者 DENG Jia Dong CHEN Wei 《Science China(Technological Sciences)》 SCIE EI CAS CSCD 2016年第6期839-851,共13页
In topology optimization of structures considering flexibility, degenerated optimal solutions, such as hinges, gray areas and disconnected structures may appear. In this paper, built upon the newly developed morphable... In topology optimization of structures considering flexibility, degenerated optimal solutions, such as hinges, gray areas and disconnected structures may appear. In this paper, built upon the newly developed morphable component based topology optimization approach, a novel representation using connected morphable components(CMC) and a linkage scheme are proposed to prevent degenerating designs and to ensure structure integrity. A lower bound condition of the thickness of each component is also incorporated to completely remove the smallest components in an optimal configuration. Designs of flexible structures, such as compliant mechanism design, maximum compliance structure design, and design of low-frequency resonating micro devices are studied to validate the proposed methodology. Our work demonstrates that the new methodology can successfully prevent degeneration solutions and possesses other advantages, such as minimum member size control in topology optimization of flexible structures. 展开更多
关键词 topology optimization connected component degenerated designs
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部