It is studied that reactivity of petroleum catalytic slurry （PCS） and coal with Fe catalyst in 1 L autoclave, the fol- lowing is mainly discussed, coal conversion and asphalt properties, especially related with petr...It is studied that reactivity of petroleum catalytic slurry （PCS） and coal with Fe catalyst in 1 L autoclave, the fol- lowing is mainly discussed, coal conversion and asphalt properties, especially related with petroleum cracking slurry （PCS） properties. The results show that co-processing conversion and asphalt yield increase with the increase of PCS ratio. PCS prop- erties have important effect on coal conversion and asphalt properties. One kind of PCS shows negative effect on coal conver- sion. High aromatic PCS can lead to high ductility asphalt with good colloid properties. Coal and the PCS can lead to a strong matching effect.展开更多
To investigate the mechanical properties of cement mortar in sodium sulfate and sodium chloride solutions, uniaxial compression test and ultrasonic test were performed. Test results show that the relative dynamic elas...To investigate the mechanical properties of cement mortar in sodium sulfate and sodium chloride solutions, uniaxial compression test and ultrasonic test were performed. Test results show that the relative dynamic elastic modulus, the mass variation,and the compressive strength of cement mortar increase first, and then decrease with increasing erosion time in sodium sulfate and sodium chloride solutions. The relative dynamic elastic moduli and the compressive strengths of cement mortars with water/cement ratios of 0.55 and 0.65 in sodium sulfate solution are lower than those in sodium chloride solution with the same concentration at the420 th day of immersion. The compressive strength of cement mortar with water/cement ratio of 0.65 is more sensitive to strain rate than that with water/cement ratio of 0.55. In addition, the strain-rate sensitivity of compressive strength of cement mortar will increase under attacks of sodium sulfate or sodium chloride solution.展开更多
A magnesia adsorbent was prepared from straw pulp black liquor and magnesium sulfate for the first time, and its adsorption of phenol from aqueous solution was examined. The characteristics of the adsorbent were teste...A magnesia adsorbent was prepared from straw pulp black liquor and magnesium sulfate for the first time, and its adsorption of phenol from aqueous solution was examined. The characteristics of the adsorbent were tested through chemical analysis, surface analysis, X-ray diffraction and FT-IR spectroscopy. The effects of various factors, such as dose, adsorption time and adsorption temperature, on phenol adsorption behavior were studied. The results show that the adsorption processes can be fitted to the isotherm Langmuir model very well. It was found that the adsorption process was strongly influenced by temperature and the optimal temperature for phenol removal was 40 ℃. The optimum adsorption time was 10 min, and desorption would happen afterwards. Between the models of Langmuir and Freundlich, the adsorption process of phenol onto magnesia fitted the Langmuir equation better.展开更多
The coupled effect of viscosity enhancing admixtures(VEA)and superplasticizer(SP)on the rheological behavior of cement paste was investigated in this work.Two types of VEAs,including hydroxypropyl methylcellulose(HPMC...The coupled effect of viscosity enhancing admixtures(VEA)and superplasticizer(SP)on the rheological behavior of cement paste was investigated in this work.Two types of VEAs,including hydroxypropyl methylcellulose(HPMC)and Welan gum,and two types of SPs,i.e.polycarboxylate(PCA)and polynaphthalenesulfonate(PNS)were used as admixtures for cement paste.Rheological curves of cement paste and simulated pore solution containing VEA and SP were tested.Simulated pore solution test results show that molecules of different SPs may generate different effects on the viscosity of VEA solutions.Hershel-Bulkley(H-B)model was used to fit rheological curve of cement paste.Strong interaction between PNS and HPMC was observed in this work.展开更多
文摘It is studied that reactivity of petroleum catalytic slurry （PCS） and coal with Fe catalyst in 1 L autoclave, the fol- lowing is mainly discussed, coal conversion and asphalt properties, especially related with petroleum cracking slurry （PCS） properties. The results show that co-processing conversion and asphalt yield increase with the increase of PCS ratio. PCS prop- erties have important effect on coal conversion and asphalt properties. One kind of PCS shows negative effect on coal conver- sion. High aromatic PCS can lead to high ductility asphalt with good colloid properties. Coal and the PCS can lead to a strong matching effect.
基金Project(LY13E080021) supported by the Natural Science Foundation of Zhejiang Province,ChinaProject(2011A610072) supported by the Ningbo Municipal Natural Science Foundation,ChinaProject(XKL14D2063) supported by Subject Program of Ningbo University,China
文摘To investigate the mechanical properties of cement mortar in sodium sulfate and sodium chloride solutions, uniaxial compression test and ultrasonic test were performed. Test results show that the relative dynamic elastic modulus, the mass variation,and the compressive strength of cement mortar increase first, and then decrease with increasing erosion time in sodium sulfate and sodium chloride solutions. The relative dynamic elastic moduli and the compressive strengths of cement mortars with water/cement ratios of 0.55 and 0.65 in sodium sulfate solution are lower than those in sodium chloride solution with the same concentration at the420 th day of immersion. The compressive strength of cement mortar with water/cement ratio of 0.65 is more sensitive to strain rate than that with water/cement ratio of 0.55. In addition, the strain-rate sensitivity of compressive strength of cement mortar will increase under attacks of sodium sulfate or sodium chloride solution.
基金the financial support from the Natural Science Foundation of China (No. 20477041)
文摘A magnesia adsorbent was prepared from straw pulp black liquor and magnesium sulfate for the first time, and its adsorption of phenol from aqueous solution was examined. The characteristics of the adsorbent were tested through chemical analysis, surface analysis, X-ray diffraction and FT-IR spectroscopy. The effects of various factors, such as dose, adsorption time and adsorption temperature, on phenol adsorption behavior were studied. The results show that the adsorption processes can be fitted to the isotherm Langmuir model very well. It was found that the adsorption process was strongly influenced by temperature and the optimal temperature for phenol removal was 40 ℃. The optimum adsorption time was 10 min, and desorption would happen afterwards. Between the models of Langmuir and Freundlich, the adsorption process of phenol onto magnesia fitted the Langmuir equation better.
基金Project(2017YFB0310101)supported by National High Technology Research and Development Program of ChinaProject(51778269)supported by the National Natural Science Foundation of China
文摘The coupled effect of viscosity enhancing admixtures(VEA)and superplasticizer(SP)on the rheological behavior of cement paste was investigated in this work.Two types of VEAs,including hydroxypropyl methylcellulose(HPMC)and Welan gum,and two types of SPs,i.e.polycarboxylate(PCA)and polynaphthalenesulfonate(PNS)were used as admixtures for cement paste.Rheological curves of cement paste and simulated pore solution containing VEA and SP were tested.Simulated pore solution test results show that molecules of different SPs may generate different effects on the viscosity of VEA solutions.Hershel-Bulkley(H-B)model was used to fit rheological curve of cement paste.Strong interaction between PNS and HPMC was observed in this work.
