The rising behavior of single bubbles has been investigated in six systems with different viscosity and Morton number(Mo) from 3.21×10-11 to 163. Bubbles with maximum equivalent diameter of up to 16 mm were inves...The rising behavior of single bubbles has been investigated in six systems with different viscosity and Morton number(Mo) from 3.21×10-11 to 163. Bubbles with maximum equivalent diameter of up to 16 mm were investigated. The bubble Reynolds number(Re) ranged from 0.02 to 1200 covering 3 regimes in which two func-tions are obtained relating the drag coefficient,CD,with Re and Mo. It has been found that in the high Reynolds number regime the drag coefficient increases until the Reynolds number of about 1200. The classic expression of Jamialahmadi(1994) is improved and extended to high viscosity liquids. A new relationship for the aspect ratio of deformed bubbles in terms of Re,the Etvs number and Mo,applicable to a wide range of system properties,espe-cially in high viscosity liquids,is also suggested.展开更多
In this study,a suitable CFD(computational fluid dynamics)model has been developed to investigate the influence of liquid height on the discharge coefficient of the orifice-type liquid distributors.The orifice flow in...In this study,a suitable CFD(computational fluid dynamics)model has been developed to investigate the influence of liquid height on the discharge coefficient of the orifice-type liquid distributors.The orifice flow in different diameters and liquid heights has been realized using the shear stress transport(SST)turbulence model and the Gamma Theta transition(GTT)model.In the ANSYS CFX software,two models are used in conjunction with an automatic wall treatment which allows for a smooth shift from a wall function(WF)to a low turbulent-Re near wall formulation(LTRW).The results of the models coupled with LTRW are closer to the experimental results compared with the models with WF,indicating that LTRW is more appropriate for the prediction of boundary layer characteristics of orifice flow.Simulation results show that the flow conditions of orifices change with the variation of liquid height.With respect to the turbulence in orifice,the SST model coupled with LTRW is recommended.However,with respect to the transition to turbulence in orifice with an increase in liquid height,the predictions of GTT model coupled with LTRW are superior to those obtained using other models.展开更多
A vapor liquid equilibrium model and its related interactive energy parameters based on UNIQUAC model for the H2O-NH3-CO2 system without solid phase at the conditions of temperature from 30℃ to 90℃, pressure from 0....A vapor liquid equilibrium model and its related interactive energy parameters based on UNIQUAC model for the H2O-NH3-CO2 system without solid phase at the conditions of temperature from 30℃ to 90℃, pressure from 0.1 MPa to 0.4 MPa, and the maximum NH3 mass fraction up to 0.4 are provided. This model agrees with experimental data well (average relative error < 1%) and is useful for analysis of industrial urea production.展开更多
基金Supported by the National Natural Science Foundation of China （20821004 20990224） the National Basic Research Program of China （2007CB714300）
文摘The rising behavior of single bubbles has been investigated in six systems with different viscosity and Morton number(Mo) from 3.21×10-11 to 163. Bubbles with maximum equivalent diameter of up to 16 mm were investigated. The bubble Reynolds number(Re) ranged from 0.02 to 1200 covering 3 regimes in which two func-tions are obtained relating the drag coefficient,CD,with Re and Mo. It has been found that in the high Reynolds number regime the drag coefficient increases until the Reynolds number of about 1200. The classic expression of Jamialahmadi(1994) is improved and extended to high viscosity liquids. A new relationship for the aspect ratio of deformed bubbles in terms of Re,the Etvs number and Mo,applicable to a wide range of system properties,espe-cially in high viscosity liquids,is also suggested.
基金the financial support from the National Basic Research Program of China(No.2009CB219905)the Program for Changjiang Scholars and Innovative Research Team in University(No.IRT0936)the National Natural Science Foundation of China(No.21176172)
文摘In this study,a suitable CFD(computational fluid dynamics)model has been developed to investigate the influence of liquid height on the discharge coefficient of the orifice-type liquid distributors.The orifice flow in different diameters and liquid heights has been realized using the shear stress transport(SST)turbulence model and the Gamma Theta transition(GTT)model.In the ANSYS CFX software,two models are used in conjunction with an automatic wall treatment which allows for a smooth shift from a wall function(WF)to a low turbulent-Re near wall formulation(LTRW).The results of the models coupled with LTRW are closer to the experimental results compared with the models with WF,indicating that LTRW is more appropriate for the prediction of boundary layer characteristics of orifice flow.Simulation results show that the flow conditions of orifices change with the variation of liquid height.With respect to the turbulence in orifice,the SST model coupled with LTRW is recommended.However,with respect to the transition to turbulence in orifice with an increase in liquid height,the predictions of GTT model coupled with LTRW are superior to those obtained using other models.
文摘A vapor liquid equilibrium model and its related interactive energy parameters based on UNIQUAC model for the H2O-NH3-CO2 system without solid phase at the conditions of temperature from 30℃ to 90℃, pressure from 0.1 MPa to 0.4 MPa, and the maximum NH3 mass fraction up to 0.4 are provided. This model agrees with experimental data well (average relative error < 1%) and is useful for analysis of industrial urea production.
