A Fe/Al clad tube was prepared by explosive welding.Then the bonding characteristic of the interface was investigated by compression,flattening and compression-shear test.The test results exhibit that the clad tubes p...A Fe/Al clad tube was prepared by explosive welding.Then the bonding characteristic of the interface was investigated by compression,flattening and compression-shear test.The test results exhibit that the clad tubes possessing good bonding interface have higher shear strength than that of pure aluminum and can bear both axial and radial deformation.The original interface between aluminum layer and ferrite layer was observed by scanning electron microscopy（SEM）.The results show that the clad tubes with good bonding properties possess the interface in wave and straight shape.The Fe/Al clad tube was used to manufacture the T-shape by hydro-bulging.It is found that the good-bonding interface of the Fe/Al clad tube plays a dominant role in the formation of the T-shape.展开更多
The pile-soil system interaction computational model in liquefaction-induced lateral spreading ground was established by the finite difference numerical method.Considering an elastic-plastic subgrade reaction method,n...The pile-soil system interaction computational model in liquefaction-induced lateral spreading ground was established by the finite difference numerical method.Considering an elastic-plastic subgrade reaction method,numerical methods involving finite difference approach of pile in liquefaction-induced lateral spreading ground were derived and implemented into a finite difference program.Based on the monotonic loading tests on saturated sand after liquefaction,the liquefaction lateral deformation of the site where group piles are located was predicted.The effects of lateral ground deformation after liquefaction on a group of pile foundations were studied using the fmite difference program mentioned above,and the failure mechanism of group piles in liquefaction-induced lateral spreading ground was obtained.The applicability of the program was preliminarily verified.The results show that the bending moments at the interfaces between liquefied and non-liquefied soil layers are larger than those at the pile＇s top when the pile＇s top is embedded.The value of the additional static bending moment is larger than the peak dynamic bending moment during the earthquake,so in the pile foundation design,more than the superstructure＇s dynamics should be considered and the effect of lateral ground deformation on pile foundations cannot be neglected.展开更多
Floating zone technique is a crucible-free process for growth of high quality single crystals. Unstable thermocapillary convection is a typical phenomenon during the process under microgravity. Therefore, it is very i...Floating zone technique is a crucible-free process for growth of high quality single crystals. Unstable thermocapillary convection is a typical phenomenon during the process under microgravity. Therefore, it is very important to investigate the instability of thermocapillary convection in liquid bridges with deformable free-surface under microgravity. In this works, the Volume of Fluid(VOF) method is employed to track the free-surface movement. The results are presented as the behavior of flow structure and temperature distribution of the molten zone. The impact of Marangoni number(Ma) is also investigated on free-surface deformation as well as the instability of thermocapillary convection. The free-surface exhibits a noticeable axisymmetric(but it is non-centrosymmetric) and elliptical shape along the circumferential direction. This specific surface shape presents a typical narrow ‘neck-shaped' structure with convex at two ends of the zone and concave at the mid-plane along the axial direction. At both θ = 0° and θ = 90°, the deformation ratio ξ increases rapidly with Ma at first, and then increases slowly. Moreover, the hydrothermal wave number m and the instability of thermocapillary convection increase with Ma.展开更多
Morphological evolution of the solid-liquid interface near grain boundaries has been studied during directional solidification of succinonitrile-based transparent alloys (SCN-0.9wt%DCB). Experimental results show that...Morphological evolution of the solid-liquid interface near grain boundaries has been studied during directional solidification of succinonitrile-based transparent alloys (SCN-0.9wt%DCB). Experimental results show that the grain boundary provides the starting point of morphological instability of the solid-liquid interface. The initial perturbation near the grain boundary is significantly larger than other perturbations on the interface. The initial shape of the interface and the competition between the thermal direction and preferred crystalline orientations determine the subsequent growth pattern selections. The temporal variations of the curvature radius of cell/ridge tips near the grain boundary have also been studied when the instability occurs. This process is divided into three parts. As the pulling velocity increases, dendrites at the grain boundary grow in two different directions to form a bicrystal microstructure. Side branches on either side of the dendrite exhibit different growth patterns.展开更多
基金Project(BA2006067)supported by Achievement Transitional Foundation of Jiangsu Province,China
文摘A Fe/Al clad tube was prepared by explosive welding.Then the bonding characteristic of the interface was investigated by compression,flattening and compression-shear test.The test results exhibit that the clad tubes possessing good bonding interface have higher shear strength than that of pure aluminum and can bear both axial and radial deformation.The original interface between aluminum layer and ferrite layer was observed by scanning electron microscopy（SEM）.The results show that the clad tubes with good bonding properties possess the interface in wave and straight shape.The Fe/Al clad tube was used to manufacture the T-shape by hydro-bulging.It is found that the good-bonding interface of the Fe/Al clad tube plays a dominant role in the formation of the T-shape.
基金Project(51109208)supported by the National Natural Science Foundation of ChinaProject(2013M531688)supported by the Postdoctoral Science Foundation of China+1 种基金Project(Z012009)supported by the Open Research Fund of State Key Laboratory of Geomechanics and Geotechnical Engineering(Institute of Rock and Soil Mechanics,Chinese Academy of Sciences)Project(CKSF2012054)supported by the Foundation of Changjiang River Scientific Research Institute,China
文摘The pile-soil system interaction computational model in liquefaction-induced lateral spreading ground was established by the finite difference numerical method.Considering an elastic-plastic subgrade reaction method,numerical methods involving finite difference approach of pile in liquefaction-induced lateral spreading ground were derived and implemented into a finite difference program.Based on the monotonic loading tests on saturated sand after liquefaction,the liquefaction lateral deformation of the site where group piles are located was predicted.The effects of lateral ground deformation after liquefaction on a group of pile foundations were studied using the fmite difference program mentioned above,and the failure mechanism of group piles in liquefaction-induced lateral spreading ground was obtained.The applicability of the program was preliminarily verified.The results show that the bending moments at the interfaces between liquefied and non-liquefied soil layers are larger than those at the pile＇s top when the pile＇s top is embedded.The value of the additional static bending moment is larger than the peak dynamic bending moment during the earthquake,so in the pile foundation design,more than the superstructure＇s dynamics should be considered and the effect of lateral ground deformation on pile foundations cannot be neglected.
基金supported by National Natural Science Foundation of China(Grant Number 51276089)
文摘Floating zone technique is a crucible-free process for growth of high quality single crystals. Unstable thermocapillary convection is a typical phenomenon during the process under microgravity. Therefore, it is very important to investigate the instability of thermocapillary convection in liquid bridges with deformable free-surface under microgravity. In this works, the Volume of Fluid(VOF) method is employed to track the free-surface movement. The results are presented as the behavior of flow structure and temperature distribution of the molten zone. The impact of Marangoni number(Ma) is also investigated on free-surface deformation as well as the instability of thermocapillary convection. The free-surface exhibits a noticeable axisymmetric(but it is non-centrosymmetric) and elliptical shape along the circumferential direction. This specific surface shape presents a typical narrow ‘neck-shaped' structure with convex at two ends of the zone and concave at the mid-plane along the axial direction. At both θ = 0° and θ = 90°, the deformation ratio ξ increases rapidly with Ma at first, and then increases slowly. Moreover, the hydrothermal wave number m and the instability of thermocapillary convection increase with Ma.
基金supported by the National Natural Science Foundation of China (Grant Nos.61078057 and 51172183)NPU Foundation for Fundamental Research (Grant Nos.NPU-FFR-JC201048 and JC201155)+1 种基金the Science & Technology Program of Shanghai Maritime University (Grant No.20110054)the Project of the Excellent Youth of Shanghai (WANG CaiFang)
文摘Morphological evolution of the solid-liquid interface near grain boundaries has been studied during directional solidification of succinonitrile-based transparent alloys (SCN-0.9wt%DCB). Experimental results show that the grain boundary provides the starting point of morphological instability of the solid-liquid interface. The initial perturbation near the grain boundary is significantly larger than other perturbations on the interface. The initial shape of the interface and the competition between the thermal direction and preferred crystalline orientations determine the subsequent growth pattern selections. The temporal variations of the curvature radius of cell/ridge tips near the grain boundary have also been studied when the instability occurs. This process is divided into three parts. As the pulling velocity increases, dendrites at the grain boundary grow in two different directions to form a bicrystal microstructure. Side branches on either side of the dendrite exhibit different growth patterns.
