Binary mixtures of 1,3-dialkylimidazolium based ionic liquids （ILs） and water were selected as solvent systems to investigate the solute-solvent and solvent-solvent interactions on the preferential solvation of solv...Binary mixtures of 1,3-dialkylimidazolium based ionic liquids （ILs） and water were selected as solvent systems to investigate the solute-solvent and solvent-solvent interactions on the preferential solvation of solvatochromic indicators at 25 ℃. Empirical solvatochromic pa- rameters, dipolarity/polarizability （π^＊）, hydrogen-bond donor acidity （α）, hydrogen-bond acceptor basicity （β）, and Reichardt＇s polarity parameters （ET^N） were measured from the ultraviolet-visible spectral shifts of 4-nitroaniline, 4-nitroanisole, and Reichardt＇s dye. The solvent properties of the IL-water mixtures were found to be influenced by IL type and IL mole fraction （XIL）. All these studied systems showed the non-ideal behavior. The max- imum deviation to ideality for the solvatochromic parameters can be obtained in the XIL range from 0.i to 0.3. For most of the binary mixtures, the π^＊ values showed the synergistic effects instead of the ETN, α and β values. The observed synergy extent was dependent on the studied systems, such as the dye indicator and IL type. A preferential solvation model was utilized to gather information on the molecular interactions in the mixtures. The dye indicator was preferentially solvated on the following trend： IL〉IL-water complex〉water.展开更多
The synthesis and characterization of N,N＇-bis（salicylidene） ethylenediamine, Salen said that were carried out. The behavior of this ligand has been studied in solution in solvent homogeneous and heterogeneous syst...The synthesis and characterization of N,N＇-bis（salicylidene） ethylenediamine, Salen said that were carried out. The behavior of this ligand has been studied in solution in solvent homogeneous and heterogeneous systems in sulphate medium. The use of pH-metric titration, GRAN and JOB＇s methods have permitted the determination of different parameters governing the behavior of Salen in solution such as the acidity constant, the stability constant, the nature of the interaction solvent-solute, the solvation number, the stoichiometry of extracted complex etc.. Then the extraction of the Salen was finally undertaken to words the copper （II） sulfate medium. The pH of complexation, extraction time, the number of protons exchanged and the number of ligands have been finally determined.展开更多
Phenol is considered as pollutant due to its toxicity and carcinogenic effect.Thus,variety of innovative methods for separation and recovery of phenolic compounds is developed in order to remove the unwanted phenol fr...Phenol is considered as pollutant due to its toxicity and carcinogenic effect.Thus,variety of innovative methods for separation and recovery of phenolic compounds is developed in order to remove the unwanted phenol from wastewater and obtain valuable phenolic compound.One of potential method is extraction using green based liquid organic solvent.Therefore,the feasibility of using palm oil was investigated.In this research,palm oil based organic phase was used as diluents to treat a simulated wastewater containing 300×10^(-6) of phenol solution using emulsion liquid membrane process(ELM).The stability of water-in-oil(W/O) emulsion on diluent composition and the parameters affecting the phenol removal efficiency and stability of the emulsion;such as emulsification speed,emulsification time,agitation speed,surfactant concentration,pH of external phase,contact time,stripping agent concentration and treat ratio were carried out.The results of ELM study showed that at ratio7 to 3 of palm oil to kerosene,5 min and 1300 r·min^(-1) of emulsification process the stabile primary emulsion were formed.Also,no carrier is needed to facilitate the phenol extraction.In experimental conditions of500 r·min^(-1) of agitation speed,3%Span 80,pH 8 of external phase,5 min of contact time,0.1 mol·L^(-1) NaOH as stripping agent and 1:10 of treat ratio,the ELM process was very promising for removing the phenol from the wastewater.The extraction performance at about 83%of phenol was removed for simulated wastewater and an enrichment of phenol in recovery phase as phenolate compound was around 11 times.展开更多
In this study,by means of the experiments for desulfurization of model diesel through oxidative extraction,the changes associated with the rate of desulfurization of diesel and the mechanism for oxidation of sulfides ...In this study,by means of the experiments for desulfurization of model diesel through oxidative extraction,the changes associated with the rate of desulfurization of diesel and the mechanism for oxidation of sulfides in diesel were explored. Through studying the mechanism for oxidation of sulfides and the principle of solvent extraction,the kinetic equation of desulfurization via oxidative extraction were determined. By means of the evaluation of model parameters and curve fitting,the reaction order between organic sulfide and sulfone,the intrinsic oxidation rate constant of organic sulfide and sulfone,and the equilibrium constant between sulfone in model diesel and extractive solvent were determined. The experimental values of the desulfurization rate and the theoretical values of the corresponding model equation had closely demonstrated that the desulfurization reaction rate had high accuracy. And the reaction kinetics could provide an important basis for diesel desulfurization process in the future.展开更多
Proteins adsorption at solid surfaces are of paramount important for many natural processes. However, the role of specific water in influencing the adsorption process has not been well understood. We used molecular dy...Proteins adsorption at solid surfaces are of paramount important for many natural processes. However, the role of specific water in influencing the adsorption process has not been well understood. We used molecular dynamics simulation to study the adsorption of BPTI on Au surface in three water environments （dielectric constant model, partial and full solvation models）. The result shows that a fast and strong adsorption can occur in the dielectric environment, which leads to significant structure changes, as confirmed by great deviation from the crystal structure, largely spreading along the Au surface, rapid lose in all secondary structures and the great number of atoms in contact with the surface. Compared to the dielectric model, slower adsorption and fewer changes in the calculated properties above are observed in the partial solvation system since the specific water layer weakens the adsorption effects. However, in the partial solvation system, the adsorption of polar Au surface causes a significant decrease in the specific hydration around the protein, which still results in large structure changes similar to the dielectric system, but with much less adsorption extent. Enough water molecules in the full solvation system could allow the protein to rotate, and to large extent preserve the protein native structure, thus leading to the slowest and weakest adsorption. On the whole, the effects of non-specific and specific solvation on the protein structure and adsorption dynamics are significantly different, highlighting the importance of the specific water molecule in the protein adsorption.展开更多
文摘Binary mixtures of 1,3-dialkylimidazolium based ionic liquids （ILs） and water were selected as solvent systems to investigate the solute-solvent and solvent-solvent interactions on the preferential solvation of solvatochromic indicators at 25 ℃. Empirical solvatochromic pa- rameters, dipolarity/polarizability （π^＊）, hydrogen-bond donor acidity （α）, hydrogen-bond acceptor basicity （β）, and Reichardt＇s polarity parameters （ET^N） were measured from the ultraviolet-visible spectral shifts of 4-nitroaniline, 4-nitroanisole, and Reichardt＇s dye. The solvent properties of the IL-water mixtures were found to be influenced by IL type and IL mole fraction （XIL）. All these studied systems showed the non-ideal behavior. The max- imum deviation to ideality for the solvatochromic parameters can be obtained in the XIL range from 0.i to 0.3. For most of the binary mixtures, the π^＊ values showed the synergistic effects instead of the ETN, α and β values. The observed synergy extent was dependent on the studied systems, such as the dye indicator and IL type. A preferential solvation model was utilized to gather information on the molecular interactions in the mixtures. The dye indicator was preferentially solvated on the following trend： IL〉IL-water complex〉water.
文摘The synthesis and characterization of N,N＇-bis（salicylidene） ethylenediamine, Salen said that were carried out. The behavior of this ligand has been studied in solution in solvent homogeneous and heterogeneous systems in sulphate medium. The use of pH-metric titration, GRAN and JOB＇s methods have permitted the determination of different parameters governing the behavior of Salen in solution such as the acidity constant, the stability constant, the nature of the interaction solvent-solute, the solvation number, the stoichiometry of extracted complex etc.. Then the extraction of the Salen was finally undertaken to words the copper （II） sulfate medium. The pH of complexation, extraction time, the number of protons exchanged and the number of ligands have been finally determined.
基金Supported by the Ministry of Higher Education(MOHE)Universiti Teknologi Malaysia(RU Research GrantGUP:Q.J130000.2546.12H50)
文摘Phenol is considered as pollutant due to its toxicity and carcinogenic effect.Thus,variety of innovative methods for separation and recovery of phenolic compounds is developed in order to remove the unwanted phenol from wastewater and obtain valuable phenolic compound.One of potential method is extraction using green based liquid organic solvent.Therefore,the feasibility of using palm oil was investigated.In this research,palm oil based organic phase was used as diluents to treat a simulated wastewater containing 300×10^(-6) of phenol solution using emulsion liquid membrane process(ELM).The stability of water-in-oil(W/O) emulsion on diluent composition and the parameters affecting the phenol removal efficiency and stability of the emulsion;such as emulsification speed,emulsification time,agitation speed,surfactant concentration,pH of external phase,contact time,stripping agent concentration and treat ratio were carried out.The results of ELM study showed that at ratio7 to 3 of palm oil to kerosene,5 min and 1300 r·min^(-1) of emulsification process the stabile primary emulsion were formed.Also,no carrier is needed to facilitate the phenol extraction.In experimental conditions of500 r·min^(-1) of agitation speed,3%Span 80,pH 8 of external phase,5 min of contact time,0.1 mol·L^(-1) NaOH as stripping agent and 1:10 of treat ratio,the ELM process was very promising for removing the phenol from the wastewater.The extraction performance at about 83%of phenol was removed for simulated wastewater and an enrichment of phenol in recovery phase as phenolate compound was around 11 times.
文摘In this study,by means of the experiments for desulfurization of model diesel through oxidative extraction,the changes associated with the rate of desulfurization of diesel and the mechanism for oxidation of sulfides in diesel were explored. Through studying the mechanism for oxidation of sulfides and the principle of solvent extraction,the kinetic equation of desulfurization via oxidative extraction were determined. By means of the evaluation of model parameters and curve fitting,the reaction order between organic sulfide and sulfone,the intrinsic oxidation rate constant of organic sulfide and sulfone,and the equilibrium constant between sulfone in model diesel and extractive solvent were determined. The experimental values of the desulfurization rate and the theoretical values of the corresponding model equation had closely demonstrated that the desulfurization reaction rate had high accuracy. And the reaction kinetics could provide an important basis for diesel desulfurization process in the future.
文摘Proteins adsorption at solid surfaces are of paramount important for many natural processes. However, the role of specific water in influencing the adsorption process has not been well understood. We used molecular dynamics simulation to study the adsorption of BPTI on Au surface in three water environments （dielectric constant model, partial and full solvation models）. The result shows that a fast and strong adsorption can occur in the dielectric environment, which leads to significant structure changes, as confirmed by great deviation from the crystal structure, largely spreading along the Au surface, rapid lose in all secondary structures and the great number of atoms in contact with the surface. Compared to the dielectric model, slower adsorption and fewer changes in the calculated properties above are observed in the partial solvation system since the specific water layer weakens the adsorption effects. However, in the partial solvation system, the adsorption of polar Au surface causes a significant decrease in the specific hydration around the protein, which still results in large structure changes similar to the dielectric system, but with much less adsorption extent. Enough water molecules in the full solvation system could allow the protein to rotate, and to large extent preserve the protein native structure, thus leading to the slowest and weakest adsorption. On the whole, the effects of non-specific and specific solvation on the protein structure and adsorption dynamics are significantly different, highlighting the importance of the specific water molecule in the protein adsorption.
