Dynamic model for dehydration process of industrial purified terephthalic acid solvent is investigated to understand and characterize the process.A temperature differential expression is presented,which ensures the eq...Dynamic model for dehydration process of industrial purified terephthalic acid solvent is investigated to understand and characterize the process.A temperature differential expression is presented,which ensures the equation to convergence and short computation time.The model is used to study the dynamic behavior of an azeotropic distillation column separating acetic acid and water using n-butyl acetate as the entrainer.Responses of the column to feed flow and aqueous reflux flow are simulated.The movement of temperature front is also simulated.The comparison between simulation and industrial values shows that the model and algorithm are effective.On the basis of simulation and analysis,control strategy,online optimization and so on can be implemented effectively in dehydration process of purified terephthalic acid solvent.展开更多
Using a simple and reliable apparatus, the solubilities of adipic acid in water, ethanol, chloroform, n-butanol and acetone are determined by the analytic method. The results are correlated with λh equation, Apelblat...Using a simple and reliable apparatus, the solubilities of adipic acid in water, ethanol, chloroform, n-butanol and acetone are determined by the analytic method. The results are correlated with λh equation, Apelblat equation, and UNIFAC equation. The solubilities calculated by these models are in good agreement with experi-mental data, so that the models can meet the requirements of engineering design.展开更多
A slow bromination process of butyl rubber （IIR） suffers from low efficiency and low selectivity （S） of target-product. To obtain suitable approach to intensify the process, effects of assistant solvents and mixin...A slow bromination process of butyl rubber （IIR） suffers from low efficiency and low selectivity （S） of target-product. To obtain suitable approach to intensify the process, effects of assistant solvents and mixing inten-sity on the bromination process were systemically studied in this paper. The reaction process was found constantly accelerated with the increasing dosage and polarity of assistant solvent. Hexane with 30%（by volume） dichloro-methane was found as the suitable solvent component, where the stable conversion of 1,4-isoprene transferring to target product （xA1s） of 80.2%and the corresponding S of 91.2%were obtained in 5 min. The accelerated reaction process was demonstrated being remarkably affected by mixing intensity until the optimal stirring rate of 1100 r＆#183;min-1 in a stirred tank reactor. With better mixing condition, a further intensification of the process was achieved in a ro-tating packed bed （RPB） reactor, where xA1s of 82.6% and S of 91.9% were obtained in 2 min. The usage of the suitable solvent component and RPB has potential application in the industrial bromination process intensification.展开更多
2-Chloro-5-chloromethylpyridine is a crucial intermediate of pesticides.Its solid-liquid equilibrium data will provide essential support for industrial design and further theoretical studies.The solubilities of 2-chlo...2-Chloro-5-chloromethylpyridine is a crucial intermediate of pesticides.Its solid-liquid equilibrium data will provide essential support for industrial design and further theoretical studies.The solubilities of 2-chloro-5-chloromethylpyridine in water,methanol,ethanol,ethyl acetate,acetone,trichloromethane and toluene at different temperatures were measured using the synthetic method by a laser monitoring observation technique. The solubility data were correlated with the modified Apelblat equation and Wilson equation.The calculated values were in good agreement with the experimental values.展开更多
Researchers working in the field of photovoltaic are exploring novel materials for the efficient solar energy conversion.The prime objective of the discovery of every novel photovoltaic material is to achieve more ene...Researchers working in the field of photovoltaic are exploring novel materials for the efficient solar energy conversion.The prime objective of the discovery of every novel photovoltaic material is to achieve more energy yield with easy fabrication process and less production cost features.Perovskite solar cells (PSCs)delivering the highest efficiency in the passing years with different stoichiometry and fabrication modification have made this technology a potent candidate for future energy conversion materials.Till now,many studies have shown that the quality of active layer morphology,to a great extent,determines the performance of PSCs.The current and potential techniques of solvent engineering for good active layer morphology are mainly debated using primary solvent,co-solvent (Lewis acid-base adduct approach)and solvent additives.In this review,the dynamics of numerously reported solvents on the morphological characteristics of PSCs active layer are discussed in detail.The intention is to get a clear understanding of solvent engineering induced modifications on active layer morphology in PSC devices via different crystallization routes.At last,an attempt is made to draw a framework based on different solvent coordination properties to make it easy for screening the potent solvent contender for desired PSCs precursor for a better and feasible device.展开更多
Self-assembly of colloidal nanocrystals(NCs)into large-scale superlattices with complex and controllable structures has attracted extensive attention due to their collective properties and promising device application...Self-assembly of colloidal nanocrystals(NCs)into large-scale superlattices with complex and controllable structures has attracted extensive attention due to their collective properties and promising device applications.Plasmonic NCs are very popular for long-range ordered superstructures by virtue of their collective nanogaps for electromagnetic field enhancement,in particular bulk-scale single-layer assembly.Large-area two-dimensional(2D)quasinanosheets(QNSs)composed of mono-component Au NCs or multi-component Au@ZnS core-shell hetero-nanocrystals(HNCs)were successfully prepared,via careful solvent evaporation-induced interfacial self-assembly.The entire selfassembly process was carried out on the liquid-air surface and mediated simply by tuning the operating temperatures and concentrations of the NCs.Specifically,monolayer and double-layer 2D QNSs in tens of micrometers scale with different stacking models were fabricated by precisely controlling the solvent evaporation rate and colloidal concentration.展开更多
基金Supported by the National Natural Science Foundation of China（61072127） the Outstanding Young Innovative Personnel Project of Guangdong Colleges（LYM08098）
文摘Dynamic model for dehydration process of industrial purified terephthalic acid solvent is investigated to understand and characterize the process.A temperature differential expression is presented,which ensures the equation to convergence and short computation time.The model is used to study the dynamic behavior of an azeotropic distillation column separating acetic acid and water using n-butyl acetate as the entrainer.Responses of the column to feed flow and aqueous reflux flow are simulated.The movement of temperature front is also simulated.The comparison between simulation and industrial values shows that the model and algorithm are effective.On the basis of simulation and analysis,control strategy,online optimization and so on can be implemented effectively in dehydration process of purified terephthalic acid solvent.
基金Supported by the Natural Science Foundation of Henan Province (0511021700)
文摘Using a simple and reliable apparatus, the solubilities of adipic acid in water, ethanol, chloroform, n-butanol and acetone are determined by the analytic method. The results are correlated with λh equation, Apelblat equation, and UNIFAC equation. The solubilities calculated by these models are in good agreement with experi-mental data, so that the models can meet the requirements of engineering design.
基金Supported by the National Natural Science Foundation of China(21176014,20990221,21121064)the Science-Technology Project for Supervisors of Excellent Doctor Degree Thesis of Beijing(20111001001)
文摘A slow bromination process of butyl rubber （IIR） suffers from low efficiency and low selectivity （S） of target-product. To obtain suitable approach to intensify the process, effects of assistant solvents and mixing inten-sity on the bromination process were systemically studied in this paper. The reaction process was found constantly accelerated with the increasing dosage and polarity of assistant solvent. Hexane with 30%（by volume） dichloro-methane was found as the suitable solvent component, where the stable conversion of 1,4-isoprene transferring to target product （xA1s） of 80.2%and the corresponding S of 91.2%were obtained in 5 min. The accelerated reaction process was demonstrated being remarkably affected by mixing intensity until the optimal stirring rate of 1100 r＆#183;min-1 in a stirred tank reactor. With better mixing condition, a further intensification of the process was achieved in a ro-tating packed bed （RPB） reactor, where xA1s of 82.6% and S of 91.9% were obtained in 2 min. The usage of the suitable solvent component and RPB has potential application in the industrial bromination process intensification.
文摘2-Chloro-5-chloromethylpyridine is a crucial intermediate of pesticides.Its solid-liquid equilibrium data will provide essential support for industrial design and further theoretical studies.The solubilities of 2-chloro-5-chloromethylpyridine in water,methanol,ethanol,ethyl acetate,acetone,trichloromethane and toluene at different temperatures were measured using the synthetic method by a laser monitoring observation technique. The solubility data were correlated with the modified Apelblat equation and Wilson equation.The calculated values were in good agreement with the experimental values.
基金supported by the National Key Research and Development Program of China (2016YFA0202400)the 111 project (B16016)the National Natural Science Foundation of China (51572080, 51702096, and U1705256)
文摘Researchers working in the field of photovoltaic are exploring novel materials for the efficient solar energy conversion.The prime objective of the discovery of every novel photovoltaic material is to achieve more energy yield with easy fabrication process and less production cost features.Perovskite solar cells (PSCs)delivering the highest efficiency in the passing years with different stoichiometry and fabrication modification have made this technology a potent candidate for future energy conversion materials.Till now,many studies have shown that the quality of active layer morphology,to a great extent,determines the performance of PSCs.The current and potential techniques of solvent engineering for good active layer morphology are mainly debated using primary solvent,co-solvent (Lewis acid-base adduct approach)and solvent additives.In this review,the dynamics of numerously reported solvents on the morphological characteristics of PSCs active layer are discussed in detail.The intention is to get a clear understanding of solvent engineering induced modifications on active layer morphology in PSC devices via different crystallization routes.At last,an attempt is made to draw a framework based on different solvent coordination properties to make it easy for screening the potent solvent contender for desired PSCs precursor for a better and feasible device.
基金supported by the National Natural Science Foundation of China(NSFC,51872030,51631001,21801015,21643003,51702016,51501010 and 21703219)the Fundamental Research Funds for the Central Universities+1 种基金Beijing Institute of Technology Research Fund Program for Young ScholarsJoint R&D Plan of HongKong,Macao,Taiwan and Beijing(Z191100001619002)。
文摘Self-assembly of colloidal nanocrystals(NCs)into large-scale superlattices with complex and controllable structures has attracted extensive attention due to their collective properties and promising device applications.Plasmonic NCs are very popular for long-range ordered superstructures by virtue of their collective nanogaps for electromagnetic field enhancement,in particular bulk-scale single-layer assembly.Large-area two-dimensional(2D)quasinanosheets(QNSs)composed of mono-component Au NCs or multi-component Au@ZnS core-shell hetero-nanocrystals(HNCs)were successfully prepared,via careful solvent evaporation-induced interfacial self-assembly.The entire selfassembly process was carried out on the liquid-air surface and mediated simply by tuning the operating temperatures and concentrations of the NCs.Specifically,monolayer and double-layer 2D QNSs in tens of micrometers scale with different stacking models were fabricated by precisely controlling the solvent evaporation rate and colloidal concentration.
