The oil crisis has prompted renewed interest in direct burning of oil shale as an alternative energy source. A major problem in this process is the large portion of ash produced. The cementing properties of this ash w...The oil crisis has prompted renewed interest in direct burning of oil shale as an alternative energy source. A major problem in this process is the large portion of ash produced. The cementing properties of this ash were investi-gated to determine its applicability as a building material. By means of XRD,IR,NMR and ICP,we have studied the effects of burning temperature on the reactivity of ash. Maximum reactivity was obtained with ash samples produced at 700℃ to 900℃. In this range,the strength of oil-shale-based material,with properties similar to cement,which is composed of oil shale and several other kinds of solid wastes,can achieve the standard of 42.5^# cement. Our study has provided an experimental foundation and theoretical base for a massive utilization of oil shale.展开更多
The 45, 55, 65 and 100 kDa ATP-binding proteinases (ATP-BPases) of the heat-shocked (44 ℃ for 30 min, recovery for 12h) rat C6 glioma cells were purified by DEAE-ionexchange and ATP-affinity chromatography. Their mol...The 45, 55, 65 and 100 kDa ATP-binding proteinases (ATP-BPases) of the heat-shocked (44 ℃ for 30 min, recovery for 12h) rat C6 glioma cells were purified by DEAE-ionexchange and ATP-affinity chromatography. Their molecular masses, isoelectric points (pI), pH-optima and other properties were analyzed by native proteinase gels.It was shown that the 65 kDa ATP-BPase is specifically induced by heat shock and not detectable in control cells.Its N-terminal 1-9 amino acid sequence was determined by Edman degradation, but no homologies to other proteins in the protein data bases were found. 30 and 31 kDa proteinases can be cleaved from the 45, 55 and 65 kDa proteinases to which they are linked. A possible relationship of the heat-induced 65 kDa ATP-BPase with the ATP-dependent proteinases (ATP-DPases) in prokaryotes and eukaryotes is discussed.展开更多
The stability of cemented backfill mass is important to keep miners and equipment safe in underground backfill miming.The stress-strain behavior, resistivity and thermal infrared(TIR) characteristics of backfill mass ...The stability of cemented backfill mass is important to keep miners and equipment safe in underground backfill miming.The stress-strain behavior, resistivity and thermal infrared(TIR) characteristics of backfill mass under uniaxial compression were investigated. The monitoring system consisted of a TIR observation system, a stress-strain monitoring system and a resistivity measurement system. Precursory information for impending failure of cemented backfill mass was collected, including TIR, strain and resistivity precursors. The sensitivity and difference of different monitoring information to the same failure event were compared.The results show that the time-space evolution process of the resistivity and TIR is basically the same as the whole process from compression deformation to failure of backfill mass, and the time variation of resistivity and TIR is obviously characterized by stage.The resistivity precursor turns out earlier than the TIR and the strain. The resistivity relation with loading compression is anti-symmetry, decreasing as the compression stress increases before the peak strength of backfill mass. However, when the backfill mass enters into the phase of failure, the resistivity starts to increase as the stress increases. The change of the resistivity growth direction can be regarded as the resistivity-caution-point for the failure of backfill mass under uniaxial compression. It is also indicated that the TIR information mainly represents the surface temperature evolution in the process of compression before the backfill enters into the plastic-yield state. It can be a valuable tool to obtain the precursors for failure of cemented backfill mass for backfill mines.展开更多
The outside serrated integral-fin tubes fabricated by rolling-plowing-extrusion processing were surface-treated through different processes of annealing in hydrogen atmosphere,electrochemical corrosion or sandblasting...The outside serrated integral-fin tubes fabricated by rolling-plowing-extrusion processing were surface-treated through different processes of annealing in hydrogen atmosphere,electrochemical corrosion or sandblasting.The purpose was to eliminate residual stress,clear secondary micro-fins and enhance heat transfer performance.By comparing the surface characteristics,it is found that the finned tubes treated by electrochemical corrosion have the most glabrous surfaces where the fins are almost perfectly reserved.Clear layer cracks can be observed on the top of the fins.These structures are effective in enhancing heat transfer performance when being applied to flow heat exchange.Therefore,the finned tubes treated by electrochemical corrosion are proper for the tubular exchanger with water coolant.The finned tubes treated by sandblasting have rougher surfaces with layer cracks and micro gaps removed.As these structures are useful to clearing adhesive feculence,the tubes are more suitable for the tubular heat exchanger with oil coolant.展开更多
基金Projects 50674062 supported by the National Natural Science Foundation of China2006BAC21B03 by the National Key Technologies R&D Program
文摘The oil crisis has prompted renewed interest in direct burning of oil shale as an alternative energy source. A major problem in this process is the large portion of ash produced. The cementing properties of this ash were investi-gated to determine its applicability as a building material. By means of XRD,IR,NMR and ICP,we have studied the effects of burning temperature on the reactivity of ash. Maximum reactivity was obtained with ash samples produced at 700℃ to 900℃. In this range,the strength of oil-shale-based material,with properties similar to cement,which is composed of oil shale and several other kinds of solid wastes,can achieve the standard of 42.5^# cement. Our study has provided an experimental foundation and theoretical base for a massive utilization of oil shale.
文摘The 45, 55, 65 and 100 kDa ATP-binding proteinases (ATP-BPases) of the heat-shocked (44 ℃ for 30 min, recovery for 12h) rat C6 glioma cells were purified by DEAE-ionexchange and ATP-affinity chromatography. Their molecular masses, isoelectric points (pI), pH-optima and other properties were analyzed by native proteinase gels.It was shown that the 65 kDa ATP-BPase is specifically induced by heat shock and not detectable in control cells.Its N-terminal 1-9 amino acid sequence was determined by Edman degradation, but no homologies to other proteins in the protein data bases were found. 30 and 31 kDa proteinases can be cleaved from the 45, 55 and 65 kDa proteinases to which they are linked. A possible relationship of the heat-induced 65 kDa ATP-BPase with the ATP-dependent proteinases (ATP-DPases) in prokaryotes and eukaryotes is discussed.
基金Projects(51504256,51004109)supported by the National Natural Science Foundation of ChinaProject(zdsys006)supported by State Key Laboratory of Safety and Health for Metal Mines,ChinaProject(2013BAB02B04)supported by the National Science and Technology Support Plan,China
文摘The stability of cemented backfill mass is important to keep miners and equipment safe in underground backfill miming.The stress-strain behavior, resistivity and thermal infrared(TIR) characteristics of backfill mass under uniaxial compression were investigated. The monitoring system consisted of a TIR observation system, a stress-strain monitoring system and a resistivity measurement system. Precursory information for impending failure of cemented backfill mass was collected, including TIR, strain and resistivity precursors. The sensitivity and difference of different monitoring information to the same failure event were compared.The results show that the time-space evolution process of the resistivity and TIR is basically the same as the whole process from compression deformation to failure of backfill mass, and the time variation of resistivity and TIR is obviously characterized by stage.The resistivity precursor turns out earlier than the TIR and the strain. The resistivity relation with loading compression is anti-symmetry, decreasing as the compression stress increases before the peak strength of backfill mass. However, when the backfill mass enters into the phase of failure, the resistivity starts to increase as the stress increases. The change of the resistivity growth direction can be regarded as the resistivity-caution-point for the failure of backfill mass under uniaxial compression. It is also indicated that the TIR information mainly represents the surface temperature evolution in the process of compression before the backfill enters into the plastic-yield state. It can be a valuable tool to obtain the precursors for failure of cemented backfill mass for backfill mines.
基金Projects(50675070,50930005) supported by the National Natural Science Foundation of ChinaProject(U0834002) supported by the Natural Science Foundation of Guangdong Province,China
文摘The outside serrated integral-fin tubes fabricated by rolling-plowing-extrusion processing were surface-treated through different processes of annealing in hydrogen atmosphere,electrochemical corrosion or sandblasting.The purpose was to eliminate residual stress,clear secondary micro-fins and enhance heat transfer performance.By comparing the surface characteristics,it is found that the finned tubes treated by electrochemical corrosion have the most glabrous surfaces where the fins are almost perfectly reserved.Clear layer cracks can be observed on the top of the fins.These structures are effective in enhancing heat transfer performance when being applied to flow heat exchange.Therefore,the finned tubes treated by electrochemical corrosion are proper for the tubular exchanger with water coolant.The finned tubes treated by sandblasting have rougher surfaces with layer cracks and micro gaps removed.As these structures are useful to clearing adhesive feculence,the tubes are more suitable for the tubular heat exchanger with oil coolant.
