Objective To evaluate the factors affecting optimal stentt expansion in calcified lesions treated by aggressive plaque modification with rotational atherectomy （RA） and a cutting balloon （CB）. Methods From January...Objective To evaluate the factors affecting optimal stentt expansion in calcified lesions treated by aggressive plaque modification with rotational atherectomy （RA） and a cutting balloon （CB）. Methods From January 2014 to May 2015, 92 patients with moderate to severe coronary calcified lesions underwent rotational atherectomy and intravascular ultrasound imaging at Chinese PLA General Hospital （Beijing, China） were included in this study, They were divided into a rotational artherectomy combined with cutting balloon （RACB） group （46 patients treated with RA followed by CB angioplasty） and an RA group （46 patients treated with RA followed by plain balloon angioplasty）. Another 40 patients with similar severity of their calcified lesions treated with plain old balloon angioplasty （POBA） were de- mographically matched to the other groups and defined as the POBA group. All patients received a drug-eluting stent after plaque prepara- tion. Lumen diameter and lumen diameter stenosis （LDS） were measured by quantitative coronary angiography at baseline, after RA, after dilatation, and after stenting. Optimal stent expansion was defined as the final LDS 〈 10%. Results The initial and post-RA LDS values were similar among the three groups. However, after dilatation, the LDS significantly decreased in the RACB group （from 54.5% ± 8.9% to 36.1%＋ 7.1%） but only moderately decreased （from 55.7% ± 7.8% to 46.9% ± 9.4%） in the RA group （time × group, P 〈 0.001）. After stenting, there was a higher rate of optimal stent expansion in the RACB group （71.7% in the RACB group, 54.5% in the RA group, and 15% in the POBA group, P 〈 0.001）, and the final LDS was significantly diminished in the RACB group compared to the other two groups （6.0% ± 2.3%, 10.8% ± 3.3%, 12.7% ± 2.1%, P 〈 0.001）. Moreover, an LDS 〈 40% after plaque preparation （OR = 2.994, 95% CI： 1.297-6.911） was associated with optimal stent expansion, which also had a positive correlation with the appearance of a calcified ring split （r = 0,581, P 〈 0.001）. Conclusions Aggressive plaque modification with RA and CB achieve more optimal stent expansion. An LDS ≤ 40% after plaque modification was a predictive factor for optimal stent expansion in calcified lesions. This parameter was also associated with the presence of calcified ring split.展开更多
In this paper,we consider a prey-predator fishery model with prey dispersal in a two-patch environment,one is assumed to be a free fishing zone and the other is a reserved zone where fishing and other extractive activ...In this paper,we consider a prey-predator fishery model with prey dispersal in a two-patch environment,one is assumed to be a free fishing zone and the other is a reserved zone where fishing and other extractive activities are prohibited.The existence of possible steady states of the system is discussed.The local and global stability analysis has been carried out.An optimal harvesting policy is given using Pontryagin s maximum principle.展开更多
Double-layered pellet （DLP） roasting is a novel pretreatment method for sulfur and arsenic-bearing gold concentrates. In this process, preparation of DLPs is a fundamental step which is required to produce DLPs with...Double-layered pellet （DLP） roasting is a novel pretreatment method for sulfur and arsenic-bearing gold concentrates. In this process, preparation of DLPs is a fundamental step which is required to produce DLPs with favorable mechanical strength and thermal stability. Studies were carried out to investigate the affecting factors and conditions on the preparation and properties of DLPs. The results show that moisture content has significant influence on DLPs preparation. With the increase of moisture content in the range of no more than 9.8%, drop resistance and compressive strength of green DLPs are raised and the pelletizing dynamics is improved accordingly. The optimum conditions are determined as moisture content of 9.8%, coating time of 14-16 min, drying temperature 〈80 ℃and drying gas velocity 〈1.2 m/s. When DLPs prepared under these conditions are roasted at 600 ℃ for 1 h, favorable removal and solidifying rates can be obtained, in which the removal rates of arsenic and sulfur are 94.38% and 82.55%, and the solidifying rates of arsenic and sulfur reach 99.62% and 99.79%, respectively. These results promise industrial application of DLP roasting.展开更多
In the study cyanobacterial strains were isolated from different sites of Hizoop rivers, Koya-Iraq and identified according to their morphological characters by using microscope, two genera which were in filamentous f...In the study cyanobacterial strains were isolated from different sites of Hizoop rivers, Koya-Iraq and identified according to their morphological characters by using microscope, two genera which were in filamentous form identified as Chroococcus sp. and Lyngbya sp.. After identification of genera their optimum growth condition studied by using the effect of temperature and pH to their dry weight. In the result, the optimum temperature and pH for both filamentous cyanobacteria were 25 ℃ and pH 7.5. Both cyanobacterial strains were extracted with ethanol, methanol and diethyl ether at various concentrations （0.2 g/mL, 0.1 g/mL, 0.005 g/mL） which exhibited the antibacterial activities against Staphylococcus aureus, E. coli and B. subtilus. Inhibition activities of the two cyanobacterial extracts were more effective at high concentration against the tested pathogens at the low concentration, especially those ofLyngbya sp. The higher inhibition zone showed with extract by ethanol.展开更多
In this letter we study fermionic zero modes in gauge and gravity backgrounds taking a two-dimensional compact manifold S2 as extra dimensions. The result is that there exist massless Dirac fermions which have normali...In this letter we study fermionic zero modes in gauge and gravity backgrounds taking a two-dimensional compact manifold S2 as extra dimensions. The result is that there exist massless Dirac fermions which have normalizable zero modes under quite general assumptions about these backgrounds on the bulk. Several special cases of gauge background on the sphere axe discussed and some simple fermionic zero modes are obtained.展开更多
文摘Objective To evaluate the factors affecting optimal stentt expansion in calcified lesions treated by aggressive plaque modification with rotational atherectomy （RA） and a cutting balloon （CB）. Methods From January 2014 to May 2015, 92 patients with moderate to severe coronary calcified lesions underwent rotational atherectomy and intravascular ultrasound imaging at Chinese PLA General Hospital （Beijing, China） were included in this study, They were divided into a rotational artherectomy combined with cutting balloon （RACB） group （46 patients treated with RA followed by CB angioplasty） and an RA group （46 patients treated with RA followed by plain balloon angioplasty）. Another 40 patients with similar severity of their calcified lesions treated with plain old balloon angioplasty （POBA） were de- mographically matched to the other groups and defined as the POBA group. All patients received a drug-eluting stent after plaque prepara- tion. Lumen diameter and lumen diameter stenosis （LDS） were measured by quantitative coronary angiography at baseline, after RA, after dilatation, and after stenting. Optimal stent expansion was defined as the final LDS 〈 10%. Results The initial and post-RA LDS values were similar among the three groups. However, after dilatation, the LDS significantly decreased in the RACB group （from 54.5% ± 8.9% to 36.1%＋ 7.1%） but only moderately decreased （from 55.7% ± 7.8% to 46.9% ± 9.4%） in the RA group （time × group, P 〈 0.001）. After stenting, there was a higher rate of optimal stent expansion in the RACB group （71.7% in the RACB group, 54.5% in the RA group, and 15% in the POBA group, P 〈 0.001）, and the final LDS was significantly diminished in the RACB group compared to the other two groups （6.0% ± 2.3%, 10.8% ± 3.3%, 12.7% ± 2.1%, P 〈 0.001）. Moreover, an LDS 〈 40% after plaque preparation （OR = 2.994, 95% CI： 1.297-6.911） was associated with optimal stent expansion, which also had a positive correlation with the appearance of a calcified ring split （r = 0,581, P 〈 0.001）. Conclusions Aggressive plaque modification with RA and CB achieve more optimal stent expansion. An LDS ≤ 40% after plaque modification was a predictive factor for optimal stent expansion in calcified lesions. This parameter was also associated with the presence of calcified ring split.
文摘In this paper,we consider a prey-predator fishery model with prey dispersal in a two-patch environment,one is assumed to be a free fishing zone and the other is a reserved zone where fishing and other extractive activities are prohibited.The existence of possible steady states of the system is discussed.The local and global stability analysis has been carried out.An optimal harvesting policy is given using Pontryagin s maximum principle.
基金Project(51074182)supported by the National Natural Science Foundation of ChinaProject(201012200032)supported by the Fundamental Research Funds for the Central Universities,China
文摘Double-layered pellet （DLP） roasting is a novel pretreatment method for sulfur and arsenic-bearing gold concentrates. In this process, preparation of DLPs is a fundamental step which is required to produce DLPs with favorable mechanical strength and thermal stability. Studies were carried out to investigate the affecting factors and conditions on the preparation and properties of DLPs. The results show that moisture content has significant influence on DLPs preparation. With the increase of moisture content in the range of no more than 9.8%, drop resistance and compressive strength of green DLPs are raised and the pelletizing dynamics is improved accordingly. The optimum conditions are determined as moisture content of 9.8%, coating time of 14-16 min, drying temperature 〈80 ℃and drying gas velocity 〈1.2 m/s. When DLPs prepared under these conditions are roasted at 600 ℃ for 1 h, favorable removal and solidifying rates can be obtained, in which the removal rates of arsenic and sulfur are 94.38% and 82.55%, and the solidifying rates of arsenic and sulfur reach 99.62% and 99.79%, respectively. These results promise industrial application of DLP roasting.
文摘In the study cyanobacterial strains were isolated from different sites of Hizoop rivers, Koya-Iraq and identified according to their morphological characters by using microscope, two genera which were in filamentous form identified as Chroococcus sp. and Lyngbya sp.. After identification of genera their optimum growth condition studied by using the effect of temperature and pH to their dry weight. In the result, the optimum temperature and pH for both filamentous cyanobacteria were 25 ℃ and pH 7.5. Both cyanobacterial strains were extracted with ethanol, methanol and diethyl ether at various concentrations （0.2 g/mL, 0.1 g/mL, 0.005 g/mL） which exhibited the antibacterial activities against Staphylococcus aureus, E. coli and B. subtilus. Inhibition activities of the two cyanobacterial extracts were more effective at high concentration against the tested pathogens at the low concentration, especially those ofLyngbya sp. The higher inhibition zone showed with extract by ethanol.
基金National Natural Science Foundation of China under Grant Nos.10475034 and 10705013the Fundamental Research Fund for Physics and Mathematics of Lanzhou University under Grant No.Lzu07002
文摘In this letter we study fermionic zero modes in gauge and gravity backgrounds taking a two-dimensional compact manifold S2 as extra dimensions. The result is that there exist massless Dirac fermions which have normalizable zero modes under quite general assumptions about these backgrounds on the bulk. Several special cases of gauge background on the sphere axe discussed and some simple fermionic zero modes are obtained.
