In recent years,the Yanchang shale-oil formations of the Ordos Basin are rich in reserves with complex lithology and structure characteristics,low porosity and low permeability,and weak anomalies for oil and water dis...In recent years,the Yanchang shale-oil formations of the Ordos Basin are rich in reserves with complex lithology and structure characteristics,low porosity and low permeability,and weak anomalies for oil and water discriminations,have been the key targets of unconventional oil/gas resource exploration and development in the relevant areas.The joint acoustic-electrical(AE)properties can be used to interpret reservoir lithology,mineralogy,pore structure,and fluid saturation.To conduct tests of thin section analysis,X-ray diff raction,and ultrasonic and electrical experiments at diff erent pressures and saturation degrees,cores from the shale-oil formations in the Q area of the basin are collected.The variations in AE properties with respect to clay content,porosity,pressure(microfracture),and saturation are analyzed.The experimental results indicate that the rock physics behaviors of sandstones with diff erent clay contents vary significantly.The AE properties of clean sandstones are basically dependent on the microfractures(pressure),while for muddy sandstones,the clay content is an important factor affecting the responses.The target reservoir consists of interbedded sandstone and shale layers.The AE equivalent medium equations and the Gurevich theory are applied to establish the joint models for the diff erent lithologies and simulate the variations in AE properties with respect to fluid type,pore structure,and mineral components.The three-dimensional joint templates of clean and muddy sandstones,as well as shale,are developed based on the elastic and electrical attributes and then calibrated using the experimental and well-log data.The reservoir properties are estimated with the templates and validated by the log data.The results indicate that the joint templates based on lithology characteristics can eff ectively characterize the properties of interbedded sandstone and shale layers.Furthermore,the combined application of AE data provides more beneficial information for the assessment of rock properties,leading to precise estimates that conform with the actual formation conditions.展开更多
The structural-acoustic coupling model for isotropic thin elastic plate was extended to honeycomb sandwich plate(HSP) by applying Green function method.Then an equivalent circuit model of the weakly-strongly coupled s...The structural-acoustic coupling model for isotropic thin elastic plate was extended to honeycomb sandwich plate(HSP) by applying Green function method.Then an equivalent circuit model of the weakly-strongly coupled system was proposed.Based on that,the estimation formulae of the coupled eigenfrequency were derived.The accuracy of the theoretical predictions was checked against experimental data,with good agreement achieved.Finally,the effects of HSP design parameters on the system coupling degree,the acoustic cavity eigenfrequency,and sound pressure response were analyzed.The results show that mechanical and acoustical characteristics of HSP can be improved by increasing the thickness of face sheet and reducing the mass density of material.展开更多
Structure of the octagon-type ultrasonic motor was proposed and designed so as to allow the motor to drive small actuator. The stator of the motor consisted of the octagon shape elastic body and four rectangular plate...Structure of the octagon-type ultrasonic motor was proposed and designed so as to allow the motor to drive small actuator. The stator of the motor consisted of the octagon shape elastic body and four rectangular plate ceramics. The four ceramics were attached to outer surfaces of the octagon elastic body. The same phase voltages were applied to the ceramics on horizontal surfaces, and 90° phase difference voltages were applied to the ceramics on vertical surfaces. When the AC voltage with 90° phase difference was applied in ceramics, the elliptical displacement of unimorph bars was generated by generating bending vibration. To find the maximum displacement model that generates elliptical displacement at the centers of the inner surfaces, the finite element analysis program ATILA was used. The analyzed results were compared to the experimental results. As a result, the speed and torque are increased linearly by increasing the input voltage and the speed of motors can be controlled by changing the applied voltages.展开更多
Micro arc oxidation(MAO) and electrophoretic deposition(EPD) process are employed to fabricate a dense coating on magnesium alloy to protect it from corrosion in engineering application. The EPD film changes the dampi...Micro arc oxidation(MAO) and electrophoretic deposition(EPD) process are employed to fabricate a dense coating on magnesium alloy to protect it from corrosion in engineering application. The EPD film changes the damping characteristic of magnesium alloy, and both the MAO and EPD process change the bending stiffness of samples being treated. Damping loss factor(DLF) test and sound transmission experiments were carried out for AZ31 B magnesium alloy with coating fabricated by MAO and EPD processes. The results indicate that DLF is improved in frequency range from 0-850 Hz. Bending stiffness of the samples is improved with MAO and EPD treatment. As a result, the sound transmission loss(LST) is improved in the stiffness control stage of the sound transmission verse frequency curve. To the samples by electrophoresis process, the LST is improved in frequency range from 2500-3200 Hz, because the damping loss factor is improved with EPD process. The results are useful for the surface treatment to enhance the damping loss factor, LST and widespread application of magnesium alloy while improving the corrosion resistance.展开更多
PU （polyurethane） integral skin and PVC （polyvinyl chloride） are polymeric materials which have favorable physical characteristics to reduce the impact noise when applied to floor systems. In civil construction, f...PU （polyurethane） integral skin and PVC （polyvinyl chloride） are polymeric materials which have favorable physical characteristics to reduce the impact noise when applied to floor systems. In civil construction, floating floors systems are composed of two layers above the slab： a resilient layer and, above this, a rigid layer of cement matrix that works as a subfloor. This research aims to evaluate the incorporation of PVC and PU skin waste in the resilient layer of the floating floor, for impact noise insulation. It was conducted physical, mechanical and morphological tests in the composite, as SEM （scanning electron microscopy）, determination of compressive creep, and impact noise test to evaluate the absorption capacity of the floor system over time. Furthermore, experimental results were compared with theoretical studies. These correlations may assist in understanding the behavior of impact noise damping and its relation to the size of the samples.展开更多
The nonlinear characteristics of the dust acoustic(DA)waves are studied in a homogeneous,collisionless,unmagnetized,and dissipative dusty plasma composed of negatively charged dusty grains,superthermal electrons,and n...The nonlinear characteristics of the dust acoustic(DA)waves are studied in a homogeneous,collisionless,unmagnetized,and dissipative dusty plasma composed of negatively charged dusty grains,superthermal electrons,and nonextensive ions.Sagdeev pseudopotential technique has been employed to study the large amplitude DA waves.It(Sagdeev pseudopotential)has an evidence for the existence of compressive and rarefractive solitons.The global features of the phase portrait are investigated to understand the possible types of solutions of the Sagdeev form.On the other hand,the reductive perturbation technique has been used to study small amplitude DA waves and yields the Korteweg-de Vries-Burgers(Kd V-Burgers)equation that exhibits both soliton and shock waves.The behavior of the obtained results of both large and small amplitude is investigated graphically in terms of the plasma parameters like dust kinematic viscosity,superthermal and nonextensive parameters.展开更多
基金supported by the National Natural Science Foundation of China (Nos.41974123,42174161)the Jiangsu Innovation and Entrepreneurship Plan and the Jiangsu Province Science Fund for Distinguished Young Scholars (grant no.BK20200021).
文摘In recent years,the Yanchang shale-oil formations of the Ordos Basin are rich in reserves with complex lithology and structure characteristics,low porosity and low permeability,and weak anomalies for oil and water discriminations,have been the key targets of unconventional oil/gas resource exploration and development in the relevant areas.The joint acoustic-electrical(AE)properties can be used to interpret reservoir lithology,mineralogy,pore structure,and fluid saturation.To conduct tests of thin section analysis,X-ray diff raction,and ultrasonic and electrical experiments at diff erent pressures and saturation degrees,cores from the shale-oil formations in the Q area of the basin are collected.The variations in AE properties with respect to clay content,porosity,pressure(microfracture),and saturation are analyzed.The experimental results indicate that the rock physics behaviors of sandstones with diff erent clay contents vary significantly.The AE properties of clean sandstones are basically dependent on the microfractures(pressure),while for muddy sandstones,the clay content is an important factor affecting the responses.The target reservoir consists of interbedded sandstone and shale layers.The AE equivalent medium equations and the Gurevich theory are applied to establish the joint models for the diff erent lithologies and simulate the variations in AE properties with respect to fluid type,pore structure,and mineral components.The three-dimensional joint templates of clean and muddy sandstones,as well as shale,are developed based on the elastic and electrical attributes and then calibrated using the experimental and well-log data.The reservoir properties are estimated with the templates and validated by the log data.The results indicate that the joint templates based on lithology characteristics can eff ectively characterize the properties of interbedded sandstone and shale layers.Furthermore,the combined application of AE data provides more beneficial information for the assessment of rock properties,leading to precise estimates that conform with the actual formation conditions.
基金Project(51105375)supported by the National Natural Science Foundation of ChinaProject(CSTC2010BB8204)supported by Chongqing Natural Science Foundation,China
文摘The structural-acoustic coupling model for isotropic thin elastic plate was extended to honeycomb sandwich plate(HSP) by applying Green function method.Then an equivalent circuit model of the weakly-strongly coupled system was proposed.Based on that,the estimation formulae of the coupled eigenfrequency were derived.The accuracy of the theoretical predictions was checked against experimental data,with good agreement achieved.Finally,the effects of HSP design parameters on the system coupling degree,the acoustic cavity eigenfrequency,and sound pressure response were analyzed.The results show that mechanical and acoustical characteristics of HSP can be improved by increasing the thickness of face sheet and reducing the mass density of material.
基金Project supported by the Second Stage of Brain Korea 21 Projectssupported by the National Research Foundation of Korea (NRF) Grant funded by the Korea government (MEST) [No.2011-0030806]
文摘Structure of the octagon-type ultrasonic motor was proposed and designed so as to allow the motor to drive small actuator. The stator of the motor consisted of the octagon shape elastic body and four rectangular plate ceramics. The four ceramics were attached to outer surfaces of the octagon elastic body. The same phase voltages were applied to the ceramics on horizontal surfaces, and 90° phase difference voltages were applied to the ceramics on vertical surfaces. When the AC voltage with 90° phase difference was applied in ceramics, the elliptical displacement of unimorph bars was generated by generating bending vibration. To find the maximum displacement model that generates elliptical displacement at the centers of the inner surfaces, the finite element analysis program ATILA was used. The analyzed results were compared to the experimental results. As a result, the speed and torque are increased linearly by increasing the input voltage and the speed of motors can be controlled by changing the applied voltages.
基金Project(2011BAE22B05)supported by National Technology R&D Program in the 12th Five year Plan of ChinaProject(2011DFA50900)supported by the Canada-China-USA Collaborative Research&Development ProjectProject(51071121)supported by the National Natural Science Foundation of China
文摘Micro arc oxidation(MAO) and electrophoretic deposition(EPD) process are employed to fabricate a dense coating on magnesium alloy to protect it from corrosion in engineering application. The EPD film changes the damping characteristic of magnesium alloy, and both the MAO and EPD process change the bending stiffness of samples being treated. Damping loss factor(DLF) test and sound transmission experiments were carried out for AZ31 B magnesium alloy with coating fabricated by MAO and EPD processes. The results indicate that DLF is improved in frequency range from 0-850 Hz. Bending stiffness of the samples is improved with MAO and EPD treatment. As a result, the sound transmission loss(LST) is improved in the stiffness control stage of the sound transmission verse frequency curve. To the samples by electrophoresis process, the LST is improved in frequency range from 2500-3200 Hz, because the damping loss factor is improved with EPD process. The results are useful for the surface treatment to enhance the damping loss factor, LST and widespread application of magnesium alloy while improving the corrosion resistance.
文摘PU （polyurethane） integral skin and PVC （polyvinyl chloride） are polymeric materials which have favorable physical characteristics to reduce the impact noise when applied to floor systems. In civil construction, floating floors systems are composed of two layers above the slab： a resilient layer and, above this, a rigid layer of cement matrix that works as a subfloor. This research aims to evaluate the incorporation of PVC and PU skin waste in the resilient layer of the floating floor, for impact noise insulation. It was conducted physical, mechanical and morphological tests in the composite, as SEM （scanning electron microscopy）, determination of compressive creep, and impact noise test to evaluate the absorption capacity of the floor system over time. Furthermore, experimental results were compared with theoretical studies. These correlations may assist in understanding the behavior of impact noise damping and its relation to the size of the samples.
文摘The nonlinear characteristics of the dust acoustic(DA)waves are studied in a homogeneous,collisionless,unmagnetized,and dissipative dusty plasma composed of negatively charged dusty grains,superthermal electrons,and nonextensive ions.Sagdeev pseudopotential technique has been employed to study the large amplitude DA waves.It(Sagdeev pseudopotential)has an evidence for the existence of compressive and rarefractive solitons.The global features of the phase portrait are investigated to understand the possible types of solutions of the Sagdeev form.On the other hand,the reductive perturbation technique has been used to study small amplitude DA waves and yields the Korteweg-de Vries-Burgers(Kd V-Burgers)equation that exhibits both soliton and shock waves.The behavior of the obtained results of both large and small amplitude is investigated graphically in terms of the plasma parameters like dust kinematic viscosity,superthermal and nonextensive parameters.
