Photocatalytic splitting of water over p-type semiconductors is a promising strategy for production of hydrogen.However,the determination of rate law is rarely reported.To this purpose,copper oxide(CuO)is selected as ...Photocatalytic splitting of water over p-type semiconductors is a promising strategy for production of hydrogen.However,the determination of rate law is rarely reported.To this purpose,copper oxide(CuO)is selected as a model photocathode in this study,and the photogenerated surface charge density,interfacial charge transfer rate constant and their relation to the water reduction rate(in terms of photocurrent)were investigated by a combination of(photo)electrochemical techniques.The results showed that the charge transfer rate constant is exponential-dependent on the surface charge density,and that the photocurrent equals to the product of the charge transfer rate constant and surface charge density.The reaction is first-order in terms of surface charge density.Such an unconventional rate law contrasts with the reports in literature.The charge density-dependent rate constant results from the Fermi level pinning(i.e.,Galvani potential is the main driving force for the reaction)due to accumulation of charge in the surface states and/or Frumkin behavior(i.e.,chemical potential is the main driving force).This study,therefore,may be helpful for further investigation on the mechanism of hydrogen evolution over a CuO photocathode and for designing more efficient CuO-based photocatalysts.展开更多
A hydrophobic surface was fabricated on a micro-arc oxidation (MAO) treated AZ31 Mg alloys via surface modification with myristic acid. The effects of modification time on the wettability of the coatings were investig...A hydrophobic surface was fabricated on a micro-arc oxidation (MAO) treated AZ31 Mg alloys via surface modification with myristic acid. The effects of modification time on the wettability of the coatings were investigated using the contact angle measuring device. The surface morphologies and structure of the coatings were evaluated using SEM, XRD and FT-IR. The corrosion resistance was investigated by potentiodynamic polarization curves and long-term immersion test. The results showed that the water contact angle (CA) increases gradually with modification time from 0 to 5 h, the highest CA reaches 138° after being modified for 5 h, and the number and size of the micro pores are decreased. The modification method hardly alters crystalline structure of the MAO coating, but improves the corrosion resistance based on the much positive potential and low current density. Moreover, the corrosion resistance and hydrophobicity can be enhanced with increasing the alkyl chain. The wetting and spreading for the alkylcarboxylate with low surface energy become easier on the micro-porous surface, and alkylcarboxylate monolayer will be formed through bidentate bonding, which changes the surface micropores to a sealing or semi-sealing structure and makes the MAO coating dense and hydrophobic. All the results demonstrate that the modification process improves the corrosion protection ability of the MAO coating on AZ31B Mg alloy.展开更多
Depositing a cocatalyst has proven to be an important strategy for improving the photoelectrochemical(PEC)water-splitting efficiency of photoanodes.In this study,Ni(OH)2 quantum dots(Ni(OH)2 QDs)were deposited in situ...Depositing a cocatalyst has proven to be an important strategy for improving the photoelectrochemical(PEC)water-splitting efficiency of photoanodes.In this study,Ni(OH)2 quantum dots(Ni(OH)2 QDs)were deposited in situ onto anα-Fe_(2)O_(3)photoanode via a chelation-mediated hydrolysis method.The photocurrent density of the Ni(OH)2 QDs/α-Fe_(2)O_(3)photoanode reached 1.93 mA·cm^(−2)at 1.23 V vs.RHE,which is 3.5 times that ofα-Fe_(2)O_(3),and an onset potential with a negative shift of ca.100 mV was achieved.More importantly,the Ni(OH)2 QDs exhibited excellent stability in maintaining PEC water oxidation at a high current density,which is attributed to the ultra-small crystalline size,allowing for the rapid acceptance of holes fromα-Fe_(2)O_(3)to Ni(OH)_(2)QDs,formation of active sites for water oxidation,and hole transfer from the active sites to water molecules.Further(photo)electrochemical analysis suggests that Ni(OH)_(2)QDs not only provide maximal active sites for water oxidation but also suppress charge recombination by passivating the surface states ofα-Fe_(2)O_(3),thereby significantly enhancing the water oxidation kinetics over theα-Fe_(2)O_(3)surface.展开更多
With the goal of constructing a carbon‐free energy cycle,proton‐exchange membrane(PEM)water electrolysis is a promising technology that can be integrated effectively with renewable energy resources to produce high‐...With the goal of constructing a carbon‐free energy cycle,proton‐exchange membrane(PEM)water electrolysis is a promising technology that can be integrated effectively with renewable energy resources to produce high‐purity hydrogen.IrO2,as a commercial electrocatalyst for the anode side of a PEM water electrolyzer,can both overcome the high corrosion conditions and exhibit efficient catalytic performance.However,the high consumption of Ir species cannot meet the sustainable development and economic requirements of this technology.Accordingly,it is necessary to understand the OER catalytic mechanisms for Ir species,further designing new types of low‐iridium catalysts with high activity and stability to replace IrO2.In this review,we first summarize the related catalytic mechanisms of the acidic oxygen evolution reaction(OER),and then provide general methods for measuring the catalytic performance of materials.Second,we present the structural evolution results of crystalline IrO2 and amorphous IrOx using in situ characterization techniques under catalytic conditions to understand the common catalytic characteristics of the materials and the possible factors affecting the structural evolution characteristics.Furthermore,we focus on three types of common low‐iridium catalysts,including heteroatom‐doped IrO2(IrOx)‐based catalysts,perovskite‐type iridium‐based catalysts,and pyrochlore‐type iridium‐based catalysts,and try to correlate the structural features with the intrinsic catalytic performance of materials.Finally,at the end of the review,we present the unresolved problems and challenges in this field in an attempt to develop effective strategies to further balance the catalytic activity and stability of materials under acidic OER catalytic conditions.展开更多
The technique of micro-electrolysis-contact oxidization was exploited to treat chitin-producing wastewater. Results showed that Fe-C micro-electrolysis can remove about 30% CODcr, raise pH from 0.7 to 5.5. The CODcr r...The technique of micro-electrolysis-contact oxidization was exploited to treat chitin-producing wastewater. Results showed that Fe-C micro-electrolysis can remove about 30% CODcr, raise pH from 0.7 to 5.5. The CODcr removal efficiency by biochemical process can be more than 80%. During a half year抯 operation, the whole system worked very stably and had good results, as proved by the fact that every quality indicator of effluent met the expected discharge stan-dards; which means that chitin wastewater can be treated by the technique of micro-electrolysis, contact oxidization.展开更多
Cation substitution in spinel cobaltites(e.g.,ACo2O4,in which A=Mn,Fe,Co,Ni,Cu,or Zn)is a promising strategy to precisely modulate their electronic structure/properties and thus improve the corresponding electrochemic...Cation substitution in spinel cobaltites(e.g.,ACo2O4,in which A=Mn,Fe,Co,Ni,Cu,or Zn)is a promising strategy to precisely modulate their electronic structure/properties and thus improve the corresponding electrochemical performance for water splitting.However,the fundamental principles and mechanisms are not fully understood.This research aims to systematically investigate the effects of cation substitution in spinel cobaltites derived from mixed-metal-organic frameworks on the oxygen evolution reaction(OER).Among the obtained ACo2O4 catalysts,FeCo2O4 showed excellent OER performance with a current density of 10 mA·cm^-2 at an overpotential of 164 mV in alkaline media.Both theoretical calculations and experimental results demonstrate that the Fe substitution in the crystal lattice of ACo2O4 can significantly accelerate charge transfer,thereby achieving enhanced electrochemical properties.The crystal field of spinel ACo2O4,which determines the valence states of cations A,is identified as the key factor to dictate the OER performance of these spinel cobaltites.展开更多
Type‐II‐heterojunction TiO2nanorod arrays(NAs)are achieved by a combination of reduced and pristine TiO2NAs through a simple electrochemical reduction.The heterojunction‐structured TiO2NAs exhibit an enhanced photo...Type‐II‐heterojunction TiO2nanorod arrays(NAs)are achieved by a combination of reduced and pristine TiO2NAs through a simple electrochemical reduction.The heterojunction‐structured TiO2NAs exhibit an enhanced photo‐efficiency,with respect to those of pristine TiO2NAs and completely reduced black TiO2.The improved efficiency can be attributed to a synergistic effect of two contributions of the partially reduced TiO2NAs.The light absorption is significantly increased,from theUV to the visible spectrum.Moreover,the type II structure leads to enhanced separation and transport of the electrons and charges.The proposed electrochemical approach could be applied to various semiconductors for a control of the band structure and improved photoelectrochemical performance.展开更多
Objective: To study the efficacy of electrolyzed oxidizing water ( EOW ) and hydrocolloid occlusive dressings in the acceleration of epithelialization in excised burn-wounds in rats.Methods: Each of the anesthetized S...Objective: To study the efficacy of electrolyzed oxidizing water ( EOW ) and hydrocolloid occlusive dressings in the acceleration of epithelialization in excised burn-wounds in rats.Methods: Each of the anesthetized Sprague-Dawley rats (n = 28) was subjected to a third-degree burn that covered approximately 10% of the total body surface area. Rats were assigned into four groups: Group Ⅰ ( no irrigation), Group Ⅱ (irrigation with physiologic saline), Group Ⅲ ( irrigation with EOW ) and Group Ⅳ ( hydrocolloid occlusive dressing after EOW irrigation). Wounds were observed macroscopically until complete epithelialization was present, then the epithelialized wounds were examined microscopically. Results: Healing of the burn wounds was the fastest in Group Ⅳ treated with hydrocolloid occlusive dressing together with EOW. Although extensive regenerative epidermis was seen in each Group, the proliferations of lymphocytes and macrophages associated with dense collagen deposition were more extensive in Group Ⅱ, Ⅲ and IV than in Group Ⅰ. These findings were particularly evident in Group Ⅲ and Ⅳ.Conclusions: Wound Healing may be accelerated by applying a hydrocolloid occlusive dressing on burn surfaces after they are cleaned with EOW.展开更多
Solar-driven photoelectrochemical(PEC) water splitting is a promising technology for sustainable hydrogen production, which relies on the development of efficient and stable photoanodes for water oxidation reaction. T...Solar-driven photoelectrochemical(PEC) water splitting is a promising technology for sustainable hydrogen production, which relies on the development of efficient and stable photoanodes for water oxidation reaction. The thickness and microstructure of semiconductor films are generally crucial to their PEC properties. Herein, three-dimensional(3D) interconnected nanoporous Ta3N5 film photoanodes with controlled thickness were successfully fabricated via galvanostatic anodization and NH3 nitridation. The porous Ta3N5 nanoarchitectures(NAs) of 900 nm in thickness showed the highest PEC performance due to the optimal lightharvesting and charge separation. Compared with the holeinduced photocorrosion, the electrochemical oxidation at high anodic potentials resulted in severer performance degradation of Ta3N5. Although the surface oxide layer on deteriorated Ta3N5 photoanodes could be removed by NH3 re-treatment,the PEC performance was only partially recovered. As an alternative, anchoring a dual-layer Co(OH)x/Co OOH co-catalyst shell on the porous Ta3N5 NAs demonstrated substantially enhanced PEC performance and stability. Overall, this work provides reference to controllably fabricate 3D nanoporous Ta3N5-based photoanodes for efficient and stable PEC water splitting via optimizing the light absorption, hole extraction,charge separation and utilization.展开更多
To develop low-cost, earth-abundant NiFe- based materials as highly efficient oxygen evolution reaction （OER） electrocatalysts and to probe new catalytic species are still great challenges to now. Here, an in situ f...To develop low-cost, earth-abundant NiFe- based materials as highly efficient oxygen evolution reaction （OER） electrocatalysts and to probe new catalytic species are still great challenges to now. Here, an in situ forma- tion of OER active NiFe2O4-NiOOH nanosheet arrays is demonstrated as a highly efficient OER electrocatalyst by the anodization of Fe203 domains anchored on Ni（OH）2 nanosheet arrays. The as-converted product can deliver the current density of 30 mA cm-2 with a small overpotential of 240 mV, and only requires an overpotential of 410 mV to achieve an amazing huge current density of 3000 mA cm-2. In situ potential-dependent Raman spectroscopy reveals that Ni（OH）2 in the composite is easier to be oxidized to NiOOH than pure Ni（OH）2, and the newly formed NiOOH reacts with the nearby Fe2O3 to produce hybrid NiFe2O4-NiOOH. It is found that the cooperative effect of the in situ formed NiFe2O4 and NiOOH as well as the hydrophilic and aero- phobic electrode surface make main contribution to the outstanding OER activity of the catalyst. This work will bring new perspectives to the recognition of the origin of NiFe composite materials for OER and provide a mild method to synthesize amorphous spinel materials at room temperature.展开更多
Improving the slow kinetics of alkaline hydrogen electrode reactions, involving hydrogen oxidation and evolution reactions(HOR/HER) is highly desirable for accelerating the commercialization of alkaline exchange membr...Improving the slow kinetics of alkaline hydrogen electrode reactions, involving hydrogen oxidation and evolution reactions(HOR/HER) is highly desirable for accelerating the commercialization of alkaline exchange membrane-based fuel cells(AEMFCs) and water electrolyzers(AEMWEs). However, fundamental understanding of the mechanism for HOR/HER catalysis under alkaline media is still debatable. Here we develop an amorphous tungsten oxide clusters modified iridium-tungsten nanocrystallines(Ir WOx)which exhibited by far the highest exchange current density and mass activity, about three times higher than the commercial Pt/C toward alkaline HOR/HER. Density functional theory(DFT) calculations reveal the WOxclusters act as a pivotal role to boost reversible hydrogen electrode reactions in alkaline condition but via different mechanisms, which are, hydrogen binding energy(HBE) mechanism for HOR and bifunctional mechanism for HER. This work is expected to promote our fundamental understanding about the alkaline HOR/HER catalysis and provide a new avenue for rational design of highly efficient electrocatalysts toward HOR/HER under alkaline electrolytes.展开更多
The catalytic/electrocatalytic performance of platinum(Pt)nanostructures highly relates to their morphology.Herein,we propose a facile self-template pyrolysis strategy at high temperature to synthesize one-dimensional...The catalytic/electrocatalytic performance of platinum(Pt)nanostructures highly relates to their morphology.Herein,we propose a facile self-template pyrolysis strategy at high temperature to synthesize one-dimensionally holey Pt nanotubes(Pt-hNTs)using Pt^(Ⅱ)-dimethylglyoxime complex(Pt^(Ⅱ)-DMG)nanorods as the reaction precursor.The coordination capability of DMG results in the generation of Pt^(Ⅱ)-DMG nanorods,whereas the reducibility of DMG at high temperature leads to the reduction of Pt^(Ⅱ)species in Pt^(Ⅱ)-DMG nanorods.During the reaction process,the inside-out Ostwald ripening phenomenon leads to the hollow morphology of Pt-hNTs.Benefiting from the physical characteristics of hollow and holey structure,Pt-hNTs with clean surface show superior electroactivity and durability for catalyzing ethanol electrooxidation as well as hydrogen evolution reaction in alkaline media.Under optimized experimental conditions,the constructed symmetric Pt-hNTs||Pt-hNTs ethanol electrolyzer only requires an electrolysis voltage of 0.40 V to achieve the electrochemical hydrogen production,demonstrating a highly energy saving strategy relative to traditional water electrolysis.展开更多
MesoporousCo3O4 has been prepared using porous silica as a hard template via a nanocasting route and its electrocatalytic properties were investigated as an oxygen evolution catalyst for the electrolysis of water. The...MesoporousCo3O4 has been prepared using porous silica as a hard template via a nanocasting route and its electrocatalytic properties were investigated as an oxygen evolution catalyst for the electrolysis of water. The ordered mesostructured Co3O4 shows dramatically increased catalytic activity compared to that of bulk Co3O4. Enhanced catalytic activity was achieved with high porosity and surface area, and the water oxidation overpotential （η） of the ordered mesoporous Co3O4 decreases significantly as the surface area increases. The mesoporous Co3O4 also shows excellent structural stability in alkaline media. After 100 min under 0.8 V （versus Ag/AgC1） applied bias, the sample maintains the ordered mesoporous structure with little deactivation of the catalytic properties.展开更多
Water electrolysis to produce H2 is a promising strategy for generating a renewable fuel.However,the sluggish-kinetics and low value-added anodic oxygen evolution reaction(OER)restricts the overall energy conversion e...Water electrolysis to produce H2 is a promising strategy for generating a renewable fuel.However,the sluggish-kinetics and low value-added anodic oxygen evolution reaction(OER)restricts the overall energy conversion efficiency.Herein we report a strategy of boosting H_(2)production at low voltages by replacing OER with a bioelectrochemical cascade reaction at a triphase bioanode.In the presence of oxygen,oxidase enzymes can convert biomass into valuable products,and concurrently generate H_(2)O_(2) that can be further electrooxidized at the bioanode.Benefiting from the efficient oxidase kinetics at an oxygen-rich triphase bioanode and the more favorable thermodynamics of H_(2)O_(2)oxidation than that of OER,the cell voltage and energy consumption are reduced by~0.70 V and~36%,respectively,relative to regular water electrolysis.This leads to an efficient H_(2)production at the cathode and valuable product generation at the bioanode.Integration of a bioelectrochemical cascade into the water splitting process provides an energy-efficient and promising pathway for achieving a renewable fuel.展开更多
基金the National Basic Research Development of China(2011CB936003)the National Natural Science Foundation of China(50971116)。
文摘Photocatalytic splitting of water over p-type semiconductors is a promising strategy for production of hydrogen.However,the determination of rate law is rarely reported.To this purpose,copper oxide(CuO)is selected as a model photocathode in this study,and the photogenerated surface charge density,interfacial charge transfer rate constant and their relation to the water reduction rate(in terms of photocurrent)were investigated by a combination of(photo)electrochemical techniques.The results showed that the charge transfer rate constant is exponential-dependent on the surface charge density,and that the photocurrent equals to the product of the charge transfer rate constant and surface charge density.The reaction is first-order in terms of surface charge density.Such an unconventional rate law contrasts with the reports in literature.The charge density-dependent rate constant results from the Fermi level pinning(i.e.,Galvani potential is the main driving force for the reaction)due to accumulation of charge in the surface states and/or Frumkin behavior(i.e.,chemical potential is the main driving force).This study,therefore,may be helpful for further investigation on the mechanism of hydrogen evolution over a CuO photocathode and for designing more efficient CuO-based photocatalysts.
基金Project(2014RC18)supported by Talent Introduction Funds of the Sichuan University of Science and Engineering,ChinaProject(2013CL01)supported by the Opening Project of the Material Corrosion and Protection Key Laboratory of Sichuan Province,ChinaProject(2013X06)supported by the Science and Technology Planning Project of Zigong City,China
文摘A hydrophobic surface was fabricated on a micro-arc oxidation (MAO) treated AZ31 Mg alloys via surface modification with myristic acid. The effects of modification time on the wettability of the coatings were investigated using the contact angle measuring device. The surface morphologies and structure of the coatings were evaluated using SEM, XRD and FT-IR. The corrosion resistance was investigated by potentiodynamic polarization curves and long-term immersion test. The results showed that the water contact angle (CA) increases gradually with modification time from 0 to 5 h, the highest CA reaches 138° after being modified for 5 h, and the number and size of the micro pores are decreased. The modification method hardly alters crystalline structure of the MAO coating, but improves the corrosion resistance based on the much positive potential and low current density. Moreover, the corrosion resistance and hydrophobicity can be enhanced with increasing the alkyl chain. The wetting and spreading for the alkylcarboxylate with low surface energy become easier on the micro-porous surface, and alkylcarboxylate monolayer will be formed through bidentate bonding, which changes the surface micropores to a sealing or semi-sealing structure and makes the MAO coating dense and hydrophobic. All the results demonstrate that the modification process improves the corrosion protection ability of the MAO coating on AZ31B Mg alloy.
文摘Depositing a cocatalyst has proven to be an important strategy for improving the photoelectrochemical(PEC)water-splitting efficiency of photoanodes.In this study,Ni(OH)2 quantum dots(Ni(OH)2 QDs)were deposited in situ onto anα-Fe_(2)O_(3)photoanode via a chelation-mediated hydrolysis method.The photocurrent density of the Ni(OH)2 QDs/α-Fe_(2)O_(3)photoanode reached 1.93 mA·cm^(−2)at 1.23 V vs.RHE,which is 3.5 times that ofα-Fe_(2)O_(3),and an onset potential with a negative shift of ca.100 mV was achieved.More importantly,the Ni(OH)2 QDs exhibited excellent stability in maintaining PEC water oxidation at a high current density,which is attributed to the ultra-small crystalline size,allowing for the rapid acceptance of holes fromα-Fe_(2)O_(3)to Ni(OH)_(2)QDs,formation of active sites for water oxidation,and hole transfer from the active sites to water molecules.Further(photo)electrochemical analysis suggests that Ni(OH)_(2)QDs not only provide maximal active sites for water oxidation but also suppress charge recombination by passivating the surface states ofα-Fe_(2)O_(3),thereby significantly enhancing the water oxidation kinetics over theα-Fe_(2)O_(3)surface.
文摘With the goal of constructing a carbon‐free energy cycle,proton‐exchange membrane(PEM)water electrolysis is a promising technology that can be integrated effectively with renewable energy resources to produce high‐purity hydrogen.IrO2,as a commercial electrocatalyst for the anode side of a PEM water electrolyzer,can both overcome the high corrosion conditions and exhibit efficient catalytic performance.However,the high consumption of Ir species cannot meet the sustainable development and economic requirements of this technology.Accordingly,it is necessary to understand the OER catalytic mechanisms for Ir species,further designing new types of low‐iridium catalysts with high activity and stability to replace IrO2.In this review,we first summarize the related catalytic mechanisms of the acidic oxygen evolution reaction(OER),and then provide general methods for measuring the catalytic performance of materials.Second,we present the structural evolution results of crystalline IrO2 and amorphous IrOx using in situ characterization techniques under catalytic conditions to understand the common catalytic characteristics of the materials and the possible factors affecting the structural evolution characteristics.Furthermore,we focus on three types of common low‐iridium catalysts,including heteroatom‐doped IrO2(IrOx)‐based catalysts,perovskite‐type iridium‐based catalysts,and pyrochlore‐type iridium‐based catalysts,and try to correlate the structural features with the intrinsic catalytic performance of materials.Finally,at the end of the review,we present the unresolved problems and challenges in this field in an attempt to develop effective strategies to further balance the catalytic activity and stability of materials under acidic OER catalytic conditions.
文摘The technique of micro-electrolysis-contact oxidization was exploited to treat chitin-producing wastewater. Results showed that Fe-C micro-electrolysis can remove about 30% CODcr, raise pH from 0.7 to 5.5. The CODcr removal efficiency by biochemical process can be more than 80%. During a half year抯 operation, the whole system worked very stably and had good results, as proved by the fact that every quality indicator of effluent met the expected discharge stan-dards; which means that chitin wastewater can be treated by the technique of micro-electrolysis, contact oxidization.
文摘Cation substitution in spinel cobaltites(e.g.,ACo2O4,in which A=Mn,Fe,Co,Ni,Cu,or Zn)is a promising strategy to precisely modulate their electronic structure/properties and thus improve the corresponding electrochemical performance for water splitting.However,the fundamental principles and mechanisms are not fully understood.This research aims to systematically investigate the effects of cation substitution in spinel cobaltites derived from mixed-metal-organic frameworks on the oxygen evolution reaction(OER).Among the obtained ACo2O4 catalysts,FeCo2O4 showed excellent OER performance with a current density of 10 mA·cm^-2 at an overpotential of 164 mV in alkaline media.Both theoretical calculations and experimental results demonstrate that the Fe substitution in the crystal lattice of ACo2O4 can significantly accelerate charge transfer,thereby achieving enhanced electrochemical properties.The crystal field of spinel ACo2O4,which determines the valence states of cations A,is identified as the key factor to dictate the OER performance of these spinel cobaltites.
基金supported from the National Natural Science Foundation of China (21425309, 21761132002, 21703040)China Postdoctoral Science Foundation (2017M622051) the 111 Project~~
文摘Type‐II‐heterojunction TiO2nanorod arrays(NAs)are achieved by a combination of reduced and pristine TiO2NAs through a simple electrochemical reduction.The heterojunction‐structured TiO2NAs exhibit an enhanced photo‐efficiency,with respect to those of pristine TiO2NAs and completely reduced black TiO2.The improved efficiency can be attributed to a synergistic effect of two contributions of the partially reduced TiO2NAs.The light absorption is significantly increased,from theUV to the visible spectrum.Moreover,the type II structure leads to enhanced separation and transport of the electrons and charges.The proposed electrochemical approach could be applied to various semiconductors for a control of the band structure and improved photoelectrochemical performance.
基金This study was supported by the Ministry of Education, Science,Sports and Culture of Japan(No.10470311).
文摘Objective: To study the efficacy of electrolyzed oxidizing water ( EOW ) and hydrocolloid occlusive dressings in the acceleration of epithelialization in excised burn-wounds in rats.Methods: Each of the anesthetized Sprague-Dawley rats (n = 28) was subjected to a third-degree burn that covered approximately 10% of the total body surface area. Rats were assigned into four groups: Group Ⅰ ( no irrigation), Group Ⅱ (irrigation with physiologic saline), Group Ⅲ ( irrigation with EOW ) and Group Ⅳ ( hydrocolloid occlusive dressing after EOW irrigation). Wounds were observed macroscopically until complete epithelialization was present, then the epithelialized wounds were examined microscopically. Results: Healing of the burn wounds was the fastest in Group Ⅳ treated with hydrocolloid occlusive dressing together with EOW. Although extensive regenerative epidermis was seen in each Group, the proliferations of lymphocytes and macrophages associated with dense collagen deposition were more extensive in Group Ⅱ, Ⅲ and IV than in Group Ⅰ. These findings were particularly evident in Group Ⅲ and Ⅳ.Conclusions: Wound Healing may be accelerated by applying a hydrocolloid occlusive dressing on burn surfaces after they are cleaned with EOW.
基金financially supported by the National Natural Science Foundation of China (51774145,51872317 and 21835007)China Postdoctoral Science Foundation (2019M661644)China Scholarship Council (CSC) for financial support。
文摘Solar-driven photoelectrochemical(PEC) water splitting is a promising technology for sustainable hydrogen production, which relies on the development of efficient and stable photoanodes for water oxidation reaction. The thickness and microstructure of semiconductor films are generally crucial to their PEC properties. Herein, three-dimensional(3D) interconnected nanoporous Ta3N5 film photoanodes with controlled thickness were successfully fabricated via galvanostatic anodization and NH3 nitridation. The porous Ta3N5 nanoarchitectures(NAs) of 900 nm in thickness showed the highest PEC performance due to the optimal lightharvesting and charge separation. Compared with the holeinduced photocorrosion, the electrochemical oxidation at high anodic potentials resulted in severer performance degradation of Ta3N5. Although the surface oxide layer on deteriorated Ta3N5 photoanodes could be removed by NH3 re-treatment,the PEC performance was only partially recovered. As an alternative, anchoring a dual-layer Co(OH)x/Co OOH co-catalyst shell on the porous Ta3N5 NAs demonstrated substantially enhanced PEC performance and stability. Overall, this work provides reference to controllably fabricate 3D nanoporous Ta3N5-based photoanodes for efficient and stable PEC water splitting via optimizing the light absorption, hole extraction,charge separation and utilization.
基金supported by the National Natural Science Foundation of China(21422104)the Key Project of Natural Science Foundation of Tianjin City(16JCZDJC30600)
文摘To develop low-cost, earth-abundant NiFe- based materials as highly efficient oxygen evolution reaction （OER） electrocatalysts and to probe new catalytic species are still great challenges to now. Here, an in situ forma- tion of OER active NiFe2O4-NiOOH nanosheet arrays is demonstrated as a highly efficient OER electrocatalyst by the anodization of Fe203 domains anchored on Ni（OH）2 nanosheet arrays. The as-converted product can deliver the current density of 30 mA cm-2 with a small overpotential of 240 mV, and only requires an overpotential of 410 mV to achieve an amazing huge current density of 3000 mA cm-2. In situ potential-dependent Raman spectroscopy reveals that Ni（OH）2 in the composite is easier to be oxidized to NiOOH than pure Ni（OH）2, and the newly formed NiOOH reacts with the nearby Fe2O3 to produce hybrid NiFe2O4-NiOOH. It is found that the cooperative effect of the in situ formed NiFe2O4 and NiOOH as well as the hydrophilic and aero- phobic electrode surface make main contribution to the outstanding OER activity of the catalyst. This work will bring new perspectives to the recognition of the origin of NiFe composite materials for OER and provide a mild method to synthesize amorphous spinel materials at room temperature.
基金supported by the National Key Research and Development Program of China (2018YFB1502302)the National Natural Science Foundation of China (21972107, 21832004, and 21633008)+2 种基金the National Natural Science Foundation of Jiangsu Province (BK20191186)the Fundamental Research Funds for the Central UniversitiesLarge-scale Instrument and Equipment Sharing Foundation of Wuhan University。
文摘Improving the slow kinetics of alkaline hydrogen electrode reactions, involving hydrogen oxidation and evolution reactions(HOR/HER) is highly desirable for accelerating the commercialization of alkaline exchange membrane-based fuel cells(AEMFCs) and water electrolyzers(AEMWEs). However, fundamental understanding of the mechanism for HOR/HER catalysis under alkaline media is still debatable. Here we develop an amorphous tungsten oxide clusters modified iridium-tungsten nanocrystallines(Ir WOx)which exhibited by far the highest exchange current density and mass activity, about three times higher than the commercial Pt/C toward alkaline HOR/HER. Density functional theory(DFT) calculations reveal the WOxclusters act as a pivotal role to boost reversible hydrogen electrode reactions in alkaline condition but via different mechanisms, which are, hydrogen binding energy(HBE) mechanism for HOR and bifunctional mechanism for HER. This work is expected to promote our fundamental understanding about the alkaline HOR/HER catalysis and provide a new avenue for rational design of highly efficient electrocatalysts toward HOR/HER under alkaline electrolytes.
基金supported by the Natural Science Foundation of Hainan Province(2019RC007)Key Research and Development Project of Hainan Province(ZDYF2020037)+5 种基金the National Natural Science Foundation of China(21875133 and 51873100)Natural Science Foundation of Shaanxi Province(2020JZ-23)Fundamental Research Funds for the Central Universities(GK202101005,GK201901002,2019TS007,2021CBLZ004,and 2020CSLZ012)the Innovation Team Project for Graduate Students at Shaanxi Normal University(TD2020048Y)Open Foundation of Guangxi Key Laboratory of Processing for Non-ferrous Metals and Featured Materials at Guangxi University(2021GXYSOF02)the 111 Project(B14041)。
文摘The catalytic/electrocatalytic performance of platinum(Pt)nanostructures highly relates to their morphology.Herein,we propose a facile self-template pyrolysis strategy at high temperature to synthesize one-dimensionally holey Pt nanotubes(Pt-hNTs)using Pt^(Ⅱ)-dimethylglyoxime complex(Pt^(Ⅱ)-DMG)nanorods as the reaction precursor.The coordination capability of DMG results in the generation of Pt^(Ⅱ)-DMG nanorods,whereas the reducibility of DMG at high temperature leads to the reduction of Pt^(Ⅱ)species in Pt^(Ⅱ)-DMG nanorods.During the reaction process,the inside-out Ostwald ripening phenomenon leads to the hollow morphology of Pt-hNTs.Benefiting from the physical characteristics of hollow and holey structure,Pt-hNTs with clean surface show superior electroactivity and durability for catalyzing ethanol electrooxidation as well as hydrogen evolution reaction in alkaline media.Under optimized experimental conditions,the constructed symmetric Pt-hNTs||Pt-hNTs ethanol electrolyzer only requires an electrolysis voltage of 0.40 V to achieve the electrochemical hydrogen production,demonstrating a highly energy saving strategy relative to traditional water electrolysis.
文摘MesoporousCo3O4 has been prepared using porous silica as a hard template via a nanocasting route and its electrocatalytic properties were investigated as an oxygen evolution catalyst for the electrolysis of water. The ordered mesostructured Co3O4 shows dramatically increased catalytic activity compared to that of bulk Co3O4. Enhanced catalytic activity was achieved with high porosity and surface area, and the water oxidation overpotential （η） of the ordered mesoporous Co3O4 decreases significantly as the surface area increases. The mesoporous Co3O4 also shows excellent structural stability in alkaline media. After 100 min under 0.8 V （versus Ag/AgC1） applied bias, the sample maintains the ordered mesoporous structure with little deactivation of the catalytic properties.
基金supported by the National Key R&D Program of China(2019YFA0709200)the National Natural Science Foundation of China(21988102,51772198 and 21975171)。
文摘Water electrolysis to produce H2 is a promising strategy for generating a renewable fuel.However,the sluggish-kinetics and low value-added anodic oxygen evolution reaction(OER)restricts the overall energy conversion efficiency.Herein we report a strategy of boosting H_(2)production at low voltages by replacing OER with a bioelectrochemical cascade reaction at a triphase bioanode.In the presence of oxygen,oxidase enzymes can convert biomass into valuable products,and concurrently generate H_(2)O_(2) that can be further electrooxidized at the bioanode.Benefiting from the efficient oxidase kinetics at an oxygen-rich triphase bioanode and the more favorable thermodynamics of H_(2)O_(2)oxidation than that of OER,the cell voltage and energy consumption are reduced by~0.70 V and~36%,respectively,relative to regular water electrolysis.This leads to an efficient H_(2)production at the cathode and valuable product generation at the bioanode.Integration of a bioelectrochemical cascade into the water splitting process provides an energy-efficient and promising pathway for achieving a renewable fuel.
