基于无源性的基本思想,选取定子磁通幅值作为系统的磁通控制目标,并借鉴间接定子磁场定向的控制方法,构建了一种新的基于定子磁场定向的感应电机(Induction Motor,简称IM)无源性控制器(Pacive Based Control,简称PBC)。该控制器保留了I...基于无源性的基本思想,选取定子磁通幅值作为系统的磁通控制目标,并借鉴间接定子磁场定向的控制方法,构建了一种新的基于定子磁场定向的感应电机(Induction Motor,简称IM)无源性控制器(Pacive Based Control,简称PBC)。该控制器保留了IM无源性控制器优点,证明IM无源性控制器以定子磁通作为系统控制目标的设计方法是可行的,扩展了无源性控制器设计方法的应用领域。仿真和实验结果证明,该控制器是稳定且有效的。展开更多
The control platform of the induction motor （IM） with low costs is developed by using DSP MC56F8013 with a good performance/price rtaio. The control algorithm for the speed sensorless IM is studied based on the stat...The control platform of the induction motor （IM） with low costs is developed by using DSP MC56F8013 with a good performance/price rtaio. The control algorithm for the speed sensorless IM is studied based on the stator flux orientation （SFO）. The algorithm structure is simple to be implemented and cannot be influenced by motor parameters, The improved stator flux estimation is used to compensate errors caused by the low pass filter （LPF）. A new speed regulator is designed to ensure the system working with the maximal torque in the transient state. The system simulation and the prototype experiment are made. Results show that the con- trol system has good dynamic and static performance.展开更多
Magnetorheological (MR) fluid is a kind of smart material whose rheological properties can be rapidly varied in magnetic field. To make full use of the advantages of MR fluid to devices, a model of double ended, shear...Magnetorheological (MR) fluid is a kind of smart material whose rheological properties can be rapidly varied in magnetic field. To make full use of the advantages of MR fluid to devices, a model of double ended, shear combined and valve typed MR damper is designed and manufactured, and the dynamic properties under sinusoidal excitations are experimentally studied. The experiment results show that the maximum damping force of the MR damper at the full magnetic intensity reaches about 20 kN while the maximum power required is less than 50 W, which predicts that the MR damper will be a powerful measurement for semi active vibration control of civil infrastructures.展开更多
A novel double extended state observers(ESOs)-based field-oriented control(FOC)strategy is developed for three-phase permanent magnet synchronous motor(PMSM)drive systems without any phase current sensor.In principle,...A novel double extended state observers(ESOs)-based field-oriented control(FOC)strategy is developed for three-phase permanent magnet synchronous motor(PMSM)drive systems without any phase current sensor.In principle,two current sensors are essential parts of the drive system for implementation of the feedback to achieve high accuracy control.For this purpose,the double ESOs are created to provide feedback stator currents instead of actual current sensors.The first one of the double ESOs is designed to estimate the benchmark value of q-axis stator current,which is a primary premise;While the second is designed to estimate real-time stator currents of d-axis and q-axis simultaneously.The resultant double ESOs can rapidly and accurately give estimation of the actual currents of a-axis,b-axis and c-axis,and the synthesized double ESOs-based FOC strategy for PMSM drive system without any current sensors has satisfactory control performance and strong robustness.Numerical experiments validate the feasibility and effectiveness of the proposed scheme.展开更多
Recently, artificial intelligence technique is increasingly receiving attention in solving complex and practical problem and they are widely applying in electrical machine domain. The authors consider also the direct ...Recently, artificial intelligence technique is increasingly receiving attention in solving complex and practical problem and they are widely applying in electrical machine domain. The authors consider also the direct torque control （DTC） as an alternative to conventional methods of control by pulse width modulation （PWM） and by Field oriented control （FOC）, so the application of the DTC based on artificial intelligence can show more advantages and simplified control algorithms with high performance. For this reason, the objectives of this paper can be divided into two parts, the first part is to apply neural networks and fuzzy logic techniques to the DTC control in the presence of a loop speed control comparing to the conventional regulators （as PI） to show the feasibility of these approaches, the second part is to further improve the performance of the neural network by using a neural-fuzzy regulator which combine the advantages of two techniques. Simulation results confirm the validity of the proposed techniques.展开更多
Multiphase induction machine is normally controlled using rotor field oriented vector control. Under phase（s） loss, the machine currents can be optimally controlled to satisfy certain optimization criteria. In this ...Multiphase induction machine is normally controlled using rotor field oriented vector control. Under phase（s） loss, the machine currents can be optimally controlled to satisfy certain optimization criteria. In this paper, a vector control scheme to a five-phase induction machine is introduced to ensure equal phase currents and minimum torque ripples under a phase open circuit. The controller idea can be extended to any number of phases with any number of open phases. The fundamental dq components of the stator voltage are obtained using only two PI controllers for the fundamental sequence plane, as in conventional vector control of three-phase machines. Based on steady state model, a simple expression is derived to estimate the required dq voltage components of other sequence planes to ensure equal stator phase currents and minimum torque ripple. A five-phase machine is simulated using MATLAB/Simulink to ensure controller validity.展开更多
Broadband PLC （power line communication） technology is a main factor of the development of digital convergence in the indoor network. It uses the already existing power cable infrastructure for communication purpose...Broadband PLC （power line communication） technology is a main factor of the development of digital convergence in the indoor network. It uses the already existing power cable infrastructure for communication purposes. The EM （electromagnetic） field radiating from the cable could, however, disturb other communication systems, and thus should be evaluated. The MoM （method of moment） and the FEM （finite element method） have been studied to estimate the EVI field emitted from the power cable. However, the M oM is difficult to treat the dielectric material of the cable and the FEM is time consuming. This paperpresents a new approach to estimate the radiated EM fields caused by PLC sy stems from the CM current along the cable, based on the transmission line theory. The proposed model has the advantage of using the measured primary parameters of the cable. An experimental analysis of the EM radiation distribution is also presented. A comparison showed that the model results agree quite well with the measurements performed in this study.展开更多
文摘基于无源性的基本思想,选取定子磁通幅值作为系统的磁通控制目标,并借鉴间接定子磁场定向的控制方法,构建了一种新的基于定子磁场定向的感应电机(Induction Motor,简称IM)无源性控制器(Pacive Based Control,简称PBC)。该控制器保留了IM无源性控制器优点,证明IM无源性控制器以定子磁通作为系统控制目标的设计方法是可行的,扩展了无源性控制器设计方法的应用领域。仿真和实验结果证明,该控制器是稳定且有效的。
文摘The control platform of the induction motor （IM） with low costs is developed by using DSP MC56F8013 with a good performance/price rtaio. The control algorithm for the speed sensorless IM is studied based on the stator flux orientation （SFO）. The algorithm structure is simple to be implemented and cannot be influenced by motor parameters, The improved stator flux estimation is used to compensate errors caused by the low pass filter （LPF）. A new speed regulator is designed to ensure the system working with the maximal torque in the transient state. The system simulation and the prototype experiment are made. Results show that the con- trol system has good dynamic and static performance.
文摘Magnetorheological (MR) fluid is a kind of smart material whose rheological properties can be rapidly varied in magnetic field. To make full use of the advantages of MR fluid to devices, a model of double ended, shear combined and valve typed MR damper is designed and manufactured, and the dynamic properties under sinusoidal excitations are experimentally studied. The experiment results show that the maximum damping force of the MR damper at the full magnetic intensity reaches about 20 kN while the maximum power required is less than 50 W, which predicts that the MR damper will be a powerful measurement for semi active vibration control of civil infrastructures.
基金National Natural Science Foundation of China(No.61463025)Opening Foundation of Key Laboratory of Opto-technology and Intelligent Control(Lanzhou Jiaotong University),Ministry of Education(No.KFKT2018-8)Program for Excellent Team of Scientific Research in Lanzhou Jiaotong University(No.201701)
文摘A novel double extended state observers(ESOs)-based field-oriented control(FOC)strategy is developed for three-phase permanent magnet synchronous motor(PMSM)drive systems without any phase current sensor.In principle,two current sensors are essential parts of the drive system for implementation of the feedback to achieve high accuracy control.For this purpose,the double ESOs are created to provide feedback stator currents instead of actual current sensors.The first one of the double ESOs is designed to estimate the benchmark value of q-axis stator current,which is a primary premise;While the second is designed to estimate real-time stator currents of d-axis and q-axis simultaneously.The resultant double ESOs can rapidly and accurately give estimation of the actual currents of a-axis,b-axis and c-axis,and the synthesized double ESOs-based FOC strategy for PMSM drive system without any current sensors has satisfactory control performance and strong robustness.Numerical experiments validate the feasibility and effectiveness of the proposed scheme.
文摘Recently, artificial intelligence technique is increasingly receiving attention in solving complex and practical problem and they are widely applying in electrical machine domain. The authors consider also the direct torque control （DTC） as an alternative to conventional methods of control by pulse width modulation （PWM） and by Field oriented control （FOC）, so the application of the DTC based on artificial intelligence can show more advantages and simplified control algorithms with high performance. For this reason, the objectives of this paper can be divided into two parts, the first part is to apply neural networks and fuzzy logic techniques to the DTC control in the presence of a loop speed control comparing to the conventional regulators （as PI） to show the feasibility of these approaches, the second part is to further improve the performance of the neural network by using a neural-fuzzy regulator which combine the advantages of two techniques. Simulation results confirm the validity of the proposed techniques.
文摘Multiphase induction machine is normally controlled using rotor field oriented vector control. Under phase（s） loss, the machine currents can be optimally controlled to satisfy certain optimization criteria. In this paper, a vector control scheme to a five-phase induction machine is introduced to ensure equal phase currents and minimum torque ripples under a phase open circuit. The controller idea can be extended to any number of phases with any number of open phases. The fundamental dq components of the stator voltage are obtained using only two PI controllers for the fundamental sequence plane, as in conventional vector control of three-phase machines. Based on steady state model, a simple expression is derived to estimate the required dq voltage components of other sequence planes to ensure equal stator phase currents and minimum torque ripple. A five-phase machine is simulated using MATLAB/Simulink to ensure controller validity.
文摘Broadband PLC （power line communication） technology is a main factor of the development of digital convergence in the indoor network. It uses the already existing power cable infrastructure for communication purposes. The EM （electromagnetic） field radiating from the cable could, however, disturb other communication systems, and thus should be evaluated. The MoM （method of moment） and the FEM （finite element method） have been studied to estimate the EVI field emitted from the power cable. However, the M oM is difficult to treat the dielectric material of the cable and the FEM is time consuming. This paperpresents a new approach to estimate the radiated EM fields caused by PLC sy stems from the CM current along the cable, based on the transmission line theory. The proposed model has the advantage of using the measured primary parameters of the cable. An experimental analysis of the EM radiation distribution is also presented. A comparison showed that the model results agree quite well with the measurements performed in this study.
