\ According to the analysis of the residual products by thermogravimetric analysis (TGA), the thermal decomposition process of cefazolin sodium (CEZ·Na) was thought to be similar to the degradation in solid sta...\ According to the analysis of the residual products by thermogravimetric analysis (TGA), the thermal decomposition process of cefazolin sodium (CEZ·Na) was thought to be similar to the degradation in solid state in its storage time. This laid a foundation for estimating the relative chemical stability of the drug by determination of its decomposition kinetics using TGA. Although the observed thermal decomposition kinetics of CEZ·Na was complex, a conversion level of 1% was chosen for evaluation of the stability of CEZ·Na crystalline since the mechanism here was more likely to be that of the actual product failure. The evaluation results suggested that the α form of CEZ·Na had the best stability and the amorphous one was the least stable one among α form, dehydrated α form and amorphous form.展开更多
The P2-type Na_(2/3)Fe_(1/2)Mn_(1/2)O_(2)materials were synthesized by an ultrasonic spray pyrolysis followed by solid-state sintering method.The structures,morphologies and electrochemical performances of Na_(2/3)Fe_...The P2-type Na_(2/3)Fe_(1/2)Mn_(1/2)O_(2)materials were synthesized by an ultrasonic spray pyrolysis followed by solid-state sintering method.The structures,morphologies and electrochemical performances of Na_(2/3)Fe_(1/2)Mn_(1/2)O_(2)materials were characterized thoroughly by means of X-ray diffractometer,scanning electron microscope and electrochemical charge/discharge instruments.Moreover,a thin layer of Al_(2)O_(3),which was formed on the surface of Na_(2/3)Fe_(1/2)Mn_(1/2)O_(2),can enhance the storage performance by preventing the formation of Na_(2)CO_(3)·H_(2)O,which is believed to enhance the electrochemical performances of Na_(2/3)Fe_(1/2)Mn_(1/2)O_(2)materials.This facile surface modification method may pave a way to synthesize advanced cathode materials for sodium-ion batteries.展开更多
Thermal stability and thermal decomposition kinetics of 1-butyl-3-methylimidazolium dicyanamide ([bmin+][N(CN) ]2-) were investigated using both isothermal and non-isothermal thermogravimetric analyses (TGA) under hig...Thermal stability and thermal decomposition kinetics of 1-butyl-3-methylimidazolium dicyanamide ([bmin+][N(CN) ]2-) were investigated using both isothermal and non-isothermal thermogravimetric analyses (TGA) under high pure nitrogen as carrier gas. The long-term thermogravimetric studies revealed that the highest temperature used should be 110 °C, at which [bmin+][N(CN)2-] lost less than 10% by mass in 10 hours. The non-isothermal activation energy values determined using Friedman and ASTM methods were (150±13) and (147±2) kJ·mol –1 , respectively. Multivariate non-linear-regression methods showed that expanded Fn and CnB models were the best fit models with highest correlation coefficient of 0.9994, and the apparent activation energies were consistent with iso-conversional methods.展开更多
Hierarchically porous ZSM‐5 (SiO2/Al2O3 ≈ 120) containing phosphorus was prepared by a one‐step post‐synthesis treatment involving controlled desilication and phosphorous modification. The hierarchically porous ZS...Hierarchically porous ZSM‐5 (SiO2/Al2O3 ≈ 120) containing phosphorus was prepared by a one‐step post‐synthesis treatment involving controlled desilication and phosphorous modification. The hierarchically porous ZSM‐5 featured high thermal and hydrothermal stability. The obtained ZSM‐5zeolites were systematically characterized by X‐ray diffraction, scanning electron microscopy,transmission electron microscopy, N2 adsorption‐desorption, NH3 temperature‐programmed desorption,and 27Al and 31P magic‐angle spinning nuclear magnetic resonance spectroscopy. Theprepared ZSM‐5 displayed enhanced activity and prolonged lifetime toward hydrocarbon cracking.The high activity was attributed to improved coke tolerance owing to the presence of the highlystable mesoporous network of ZSM‐5 and acid sites introduced upon phosphorus modification.Additionally a mechanism of the stabilization of the zeolites by phosphorus was proposed and discussed.展开更多
Extracellular manganese peroxidases （MnPs） produced by native and mutant strains of Trametes versicolor IBL‐04 （EB‐60, EMS‐90） were purified by ammonium sulphate precipitation and dialysis, followed by ion‐exc...Extracellular manganese peroxidases （MnPs） produced by native and mutant strains of Trametes versicolor IBL‐04 （EB‐60, EMS‐90） were purified by ammonium sulphate precipitation and dialysis, followed by ion‐exchange and gel‐permeation chromatography. The purified enzymes elucidated a single band in the 43‐kDa region on sodium dodecyl sulphate‐polyacrylamide gel electrophoresis. The optimum pH and temperature of the purified enzymes were found to be 5.0 and 40 °C, respec‐tively. Mutant strain MnPs exhibited a broader active pH range and higher thermal stability than native MnP. Purified MnPs from selected mutants showed almost identical properties to native MnP in electrophoresis, steady‐state kinetics, and metal ion and endocrine‐disrupting compound （EDC） degradation efficiency. Although the fastest reaction rates occurred with Mn2＋, MnPs displayed the highest affinity for ABTS, methoxyhydroquinone, 4‐aminophenol and reactive dyes. MnP activity was significantly enhanced by Mn2＋and Cu2＋, and inhibited in the presence of Zn2＋, Fe2＋, ethylene‐diaminetetraacetic acid and cysteine to various extents, with Hg2＋ as the most potent inhibitory agent. MnPs from all sources efficiently catalyzed the degradation of the EDCs, nonylphenol and triclosan, removing over 80%after 3 h of treatment, which was further increased up to 90%in the presence of MnP‐mediator system. The properties of T. versicolor MnPs, such as high pH and ther‐mal stability, as well as unique Michaelis‐Menten kinetic parameters and high EDC elimination effi‐ciency, render them promising candidates for industrial exploitation.展开更多
The pyrolysis of phytoremediated giant reed(Arundo donax)biomass could cause secondary pollution of heavy metals.The stabilization of heavy metals in the pyrolysis process with external materials such as Al2O3,CaCO3,F...The pyrolysis of phytoremediated giant reed(Arundo donax)biomass could cause secondary pollution of heavy metals.The stabilization of heavy metals in the pyrolysis process with external materials such as Al2O3,CaCO3,FeCl3and NaOH,wasstudied.The results showed that37%As and97%Cd in biochar were stabilized when giant reed powder was pyrolyzed at250°Cwith5%Al2O3for2h.Furthermore,59%Pb in biochar was stabilized at400°C with5%CaCO3for1h.Under biochar produced inoptimized pyrolysis conditions,Cd mainly existed in a residual fraction,while Pb and As mainly existed in oxidizable fraction inBCR analysis.In XRD analysis,As was only found in Ca2As2O7;Cd in biochar mainly existed in Cd(AlCl4)2,CdPbO3or CdSO3;and Pb mainly existed as Pb3O2SO4.展开更多
This paper is concerned with the exponential stability of weak solutions to a linear one-dimensional thermoviscoelastic system with clamped boundary conditions. This system defines a C0-semigroup {S（t）}t≥0 on the s...This paper is concerned with the exponential stability of weak solutions to a linear one-dimensional thermoviscoelastic system with clamped boundary conditions. This system defines a C0-semigroup {S（t）}t≥0 on the space L^2（0, 1） × C^1 （0,1） × H^1（0, 1）, which processes the property of the exponential stability.展开更多
An aerosol spray pyrolysis technique is used to synthesize a spherical nano-Sb@C composite. Instrumental analyses reveal that the micro-nanostructured composite with an optimized Sb content of 68.8 wt% is composed of ...An aerosol spray pyrolysis technique is used to synthesize a spherical nano-Sb@C composite. Instrumental analyses reveal that the micro-nanostructured composite with an optimized Sb content of 68.8 wt% is composed of ultra-small Sb nanoparticles （10 nm） uniformly embedded within a spherical porous C matrix （denoted as 10-Sb@C）. The content and size of Sb can be controlled by altering the concentration of the precursor. As an anode material of sodium-ion batteries, 10-Sb@C provides a discharge capacity of 435 mAh.g^-1 in the second cycle and 385 mAh.g^-1 （a capacity retention of 88.5%） after 500 cycles at 100 mAh.g^-1. In particular, the electrode exhibits an excellent rate capability （355, 324, and 270 mAh.g^-1 at 1,000, 2,000, and 4,000 mAh.g^-1, respectively）. Such a high-rate performance for the Sb-C anode has rarely been reported. The remarkable electrochemical behavior of 10-Sb@C is attributed to the synergetic effects of ultra-small Sb nanoparticles with an uniform distribution and a porous C framework, which can effectively alleviate the stress associated with a large volume change and suppress the agglomeration of the pulverized nanoparticles during prolonged charge-discharge cycling.展开更多
Using high pressure and geological condition simulation vessels, we conducted hydrous pyrolysis experiments of kerogen, solid bitumen and liquid hydrocarbons in southern China in order to study the processes of gas ge...Using high pressure and geological condition simulation vessels, we conducted hydrous pyrolysis experiments of kerogen, solid bitumen and liquid hydrocarbons in southern China in order to study the processes of gas generation and derive geo- chemical indicators of gas genesis under approximate pressure and temperature. The results indicate that gas generation productivity of different marine material decreased in the ganic matter （solid bitumen and heavy oil）, and kerogen. order of crude oil （light oil and condensate）, dispersed soluble or- Under identical temperature-pressure regimes, pyrolysates derived from kerogen and dispersed soluble organic matter display drastically different geochemical characteristics. For example, the δ13Cc02-δ13C1 values of gaseous products from dispersed soluble organic matter are greater than 20%o, whereas those from kerogen are less than 20%~. The 813C1 values of pyrolysates from different marine hydrocarbon sources generally increase with pyrolysis temperature, but are always lower than those of the source precursors. The δ13C values of ethane and propane in the pyrolysates also increase with increasing pyrolysis temperature, eventually approaching that of their sources, at peak hydro- carbon generation. At high-over mature stages, the δ13C values of ethane and propane are often greater than those of their sources but close to those of coal gases, and thus become ineffective as gas genetic indicators. Ln（CffC3） can clearly distin- guish kerogen degradation gas from oil cracking gas and Ln（CJC2）-（δ13C1-δ13C2） can be an effective indicator for distinguishing oil cracking gas from dispersed soluble organic matter cracking gas.展开更多
文摘\ According to the analysis of the residual products by thermogravimetric analysis (TGA), the thermal decomposition process of cefazolin sodium (CEZ·Na) was thought to be similar to the degradation in solid state in its storage time. This laid a foundation for estimating the relative chemical stability of the drug by determination of its decomposition kinetics using TGA. Although the observed thermal decomposition kinetics of CEZ·Na was complex, a conversion level of 1% was chosen for evaluation of the stability of CEZ·Na crystalline since the mechanism here was more likely to be that of the actual product failure. The evaluation results suggested that the α form of CEZ·Na had the best stability and the amorphous one was the least stable one among α form, dehydrated α form and amorphous form.
基金financially supported by the Natural Science Foundation of Hunan Province,China(No.2020JJ5755)the National Natural Science Foundation of China(Nos.51804344,51704332,51874360)the Innovation and Entrepreneurship Project of Hunan Province,China(No.2018GK5026)。
文摘The P2-type Na_(2/3)Fe_(1/2)Mn_(1/2)O_(2)materials were synthesized by an ultrasonic spray pyrolysis followed by solid-state sintering method.The structures,morphologies and electrochemical performances of Na_(2/3)Fe_(1/2)Mn_(1/2)O_(2)materials were characterized thoroughly by means of X-ray diffractometer,scanning electron microscope and electrochemical charge/discharge instruments.Moreover,a thin layer of Al_(2)O_(3),which was formed on the surface of Na_(2/3)Fe_(1/2)Mn_(1/2)O_(2),can enhance the storage performance by preventing the formation of Na_(2)CO_(3)·H_(2)O,which is believed to enhance the electrochemical performances of Na_(2/3)Fe_(1/2)Mn_(1/2)O_(2)materials.This facile surface modification method may pave a way to synthesize advanced cathode materials for sodium-ion batteries.
基金Supported by the National Natural Science Foundation of China （20703014） the Outstanding Youth Foundation of HenanProvince （074100510005）
文摘Thermal stability and thermal decomposition kinetics of 1-butyl-3-methylimidazolium dicyanamide ([bmin+][N(CN) ]2-) were investigated using both isothermal and non-isothermal thermogravimetric analyses (TGA) under high pure nitrogen as carrier gas. The long-term thermogravimetric studies revealed that the highest temperature used should be 110 °C, at which [bmin+][N(CN)2-] lost less than 10% by mass in 10 hours. The non-isothermal activation energy values determined using Friedman and ASTM methods were (150±13) and (147±2) kJ·mol –1 , respectively. Multivariate non-linear-regression methods showed that expanded Fn and CnB models were the best fit models with highest correlation coefficient of 0.9994, and the apparent activation energies were consistent with iso-conversional methods.
基金supported by the National Natural Science Foundation of China (21403070, 21573073)National Key Technology Research and De-velopment Program (2012BAE05B02)Shanghai Leading Academic Discipline Project (B409)~~
文摘Hierarchically porous ZSM‐5 (SiO2/Al2O3 ≈ 120) containing phosphorus was prepared by a one‐step post‐synthesis treatment involving controlled desilication and phosphorous modification. The hierarchically porous ZSM‐5 featured high thermal and hydrothermal stability. The obtained ZSM‐5zeolites were systematically characterized by X‐ray diffraction, scanning electron microscopy,transmission electron microscopy, N2 adsorption‐desorption, NH3 temperature‐programmed desorption,and 27Al and 31P magic‐angle spinning nuclear magnetic resonance spectroscopy. Theprepared ZSM‐5 displayed enhanced activity and prolonged lifetime toward hydrocarbon cracking.The high activity was attributed to improved coke tolerance owing to the presence of the highlystable mesoporous network of ZSM‐5 and acid sites introduced upon phosphorus modification.Additionally a mechanism of the stabilization of the zeolites by phosphorus was proposed and discussed.
基金a part of a research project entitled "The development of immobilized ligninolytic enzymes for industrial applications" supported by Higher Education Commission (HEC), Islamabad, Pakistan
文摘Extracellular manganese peroxidases （MnPs） produced by native and mutant strains of Trametes versicolor IBL‐04 （EB‐60, EMS‐90） were purified by ammonium sulphate precipitation and dialysis, followed by ion‐exchange and gel‐permeation chromatography. The purified enzymes elucidated a single band in the 43‐kDa region on sodium dodecyl sulphate‐polyacrylamide gel electrophoresis. The optimum pH and temperature of the purified enzymes were found to be 5.0 and 40 °C, respec‐tively. Mutant strain MnPs exhibited a broader active pH range and higher thermal stability than native MnP. Purified MnPs from selected mutants showed almost identical properties to native MnP in electrophoresis, steady‐state kinetics, and metal ion and endocrine‐disrupting compound （EDC） degradation efficiency. Although the fastest reaction rates occurred with Mn2＋, MnPs displayed the highest affinity for ABTS, methoxyhydroquinone, 4‐aminophenol and reactive dyes. MnP activity was significantly enhanced by Mn2＋and Cu2＋, and inhibited in the presence of Zn2＋, Fe2＋, ethylene‐diaminetetraacetic acid and cysteine to various extents, with Hg2＋ as the most potent inhibitory agent. MnPs from all sources efficiently catalyzed the degradation of the EDCs, nonylphenol and triclosan, removing over 80%after 3 h of treatment, which was further increased up to 90%in the presence of MnP‐mediator system. The properties of T. versicolor MnPs, such as high pH and ther‐mal stability, as well as unique Michaelis‐Menten kinetic parameters and high EDC elimination effi‐ciency, render them promising candidates for industrial exploitation.
基金Projects(21577176,41271330) supported by the National Natural Science Foundation of China
文摘The pyrolysis of phytoremediated giant reed(Arundo donax)biomass could cause secondary pollution of heavy metals.The stabilization of heavy metals in the pyrolysis process with external materials such as Al2O3,CaCO3,FeCl3and NaOH,wasstudied.The results showed that37%As and97%Cd in biochar were stabilized when giant reed powder was pyrolyzed at250°Cwith5%Al2O3for2h.Furthermore,59%Pb in biochar was stabilized at400°C with5%CaCO3for1h.Under biochar produced inoptimized pyrolysis conditions,Cd mainly existed in a residual fraction,while Pb and As mainly existed in oxidizable fraction inBCR analysis.In XRD analysis,As was only found in Ca2As2O7;Cd in biochar mainly existed in Cd(AlCl4)2,CdPbO3or CdSO3;and Pb mainly existed as Pb3O2SO4.
文摘This paper is concerned with the exponential stability of weak solutions to a linear one-dimensional thermoviscoelastic system with clamped boundary conditions. This system defines a C0-semigroup {S（t）}t≥0 on the space L^2（0, 1） × C^1 （0,1） × H^1（0, 1）, which processes the property of the exponential stability.
基金This work was supported by the National Basic Research Program of China （973 Program） （No. 2011CB935900）, the National Natural Science Foundation of China （NSFC） （No. 51231003）, MOE （Nos. B12015 and IRT13R30）, and the Fundamental Research Funds for the Central Universities.
文摘An aerosol spray pyrolysis technique is used to synthesize a spherical nano-Sb@C composite. Instrumental analyses reveal that the micro-nanostructured composite with an optimized Sb content of 68.8 wt% is composed of ultra-small Sb nanoparticles （10 nm） uniformly embedded within a spherical porous C matrix （denoted as 10-Sb@C）. The content and size of Sb can be controlled by altering the concentration of the precursor. As an anode material of sodium-ion batteries, 10-Sb@C provides a discharge capacity of 435 mAh.g^-1 in the second cycle and 385 mAh.g^-1 （a capacity retention of 88.5%） after 500 cycles at 100 mAh.g^-1. In particular, the electrode exhibits an excellent rate capability （355, 324, and 270 mAh.g^-1 at 1,000, 2,000, and 4,000 mAh.g^-1, respectively）. Such a high-rate performance for the Sb-C anode has rarely been reported. The remarkable electrochemical behavior of 10-Sb@C is attributed to the synergetic effects of ultra-small Sb nanoparticles with an uniform distribution and a porous C framework, which can effectively alleviate the stress associated with a large volume change and suppress the agglomeration of the pulverized nanoparticles during prolonged charge-discharge cycling.
基金supported by Petroleum & Chemical United Fund Project(Grant No. 40739902)
文摘Using high pressure and geological condition simulation vessels, we conducted hydrous pyrolysis experiments of kerogen, solid bitumen and liquid hydrocarbons in southern China in order to study the processes of gas generation and derive geo- chemical indicators of gas genesis under approximate pressure and temperature. The results indicate that gas generation productivity of different marine material decreased in the ganic matter （solid bitumen and heavy oil）, and kerogen. order of crude oil （light oil and condensate）, dispersed soluble or- Under identical temperature-pressure regimes, pyrolysates derived from kerogen and dispersed soluble organic matter display drastically different geochemical characteristics. For example, the δ13Cc02-δ13C1 values of gaseous products from dispersed soluble organic matter are greater than 20%o, whereas those from kerogen are less than 20%~. The 813C1 values of pyrolysates from different marine hydrocarbon sources generally increase with pyrolysis temperature, but are always lower than those of the source precursors. The δ13C values of ethane and propane in the pyrolysates also increase with increasing pyrolysis temperature, eventually approaching that of their sources, at peak hydro- carbon generation. At high-over mature stages, the δ13C values of ethane and propane are often greater than those of their sources but close to those of coal gases, and thus become ineffective as gas genetic indicators. Ln（CffC3） can clearly distin- guish kerogen degradation gas from oil cracking gas and Ln（CJC2）-（δ13C1-δ13C2） can be an effective indicator for distinguishing oil cracking gas from dispersed soluble organic matter cracking gas.
