This paper discusses the coloration process on the stainless steel and the properties of the film. The compositions, morphology and structure of colored films on stainless steel are studied by using SEM,AES,AFM,STM. ...This paper discusses the coloration process on the stainless steel and the properties of the film. The compositions, morphology and structure of colored films on stainless steel are studied by using SEM,AES,AFM,STM. The diffusion controlled mechanisms of films and calculation formula of surface electropotential difference are discussed.展开更多
Adsorption process is acknowledged as an effective option for phenolic wastewater treatment. In this work, the activated carbon （AC） samples after thermal modification were prepared by using muffle furnace. The phen...Adsorption process is acknowledged as an effective option for phenolic wastewater treatment. In this work, the activated carbon （AC） samples after thermal modification were prepared by using muffle furnace. The phenol ad- sorption kinetics and equilibrium measurements were carried out under static conditions at temperature ranging from 25 to 55 ~C. The test results show that the thermal modification can enhance phenol adsorption on AC samples. The porous structure and surface chemistry analyses indicate that the decay in pore morphology and decrease of total oxygen-containing functional groups are found for the thermal modified AC samples. Thus, it can be further inferred that the decrease of total oxygen-containing functional groups on the modified AC sam- ples is the main reason for the enhanced phenol adsorption capacity. For both the raw sample and the optimum modified AC sample at 900 ~C, the pseudo-second order kinetics and Langmuir models are found to fit the exper- imental data very well. The maximum phenol adsorption capacity of the optimum modified AC sample can reach 144,93 mg.g ~ which is higher than that of the raw sample, i.e. 119.53 mg.g 1. Adsorption thermodynamics analysis confirms that the phenol adsorption on the optimum modified AC sample is an exothermic process and mainly via physical adsorption.展开更多
Development of reaction-tailored electrocatalysts is becoming increasingly important as energy and environment are among key issues governing our sustainable future.Electrocatalysts are inherently optimized for applic...Development of reaction-tailored electrocatalysts is becoming increasingly important as energy and environment are among key issues governing our sustainable future.Electrocatalysts are inherently optimized for application towards reactions of interest in renewable energy,such as those involved in water splitting and artificial photosynthesis,owing to its energy efficiency,simple fabrication,and ease of operation.In this view,it is important to secure logical design principles for the synthesis of electrocatalysts for various reactions of interest,and also understand their catalytic mechanisms in the respective reactions for improvements in further iterations.In this review,we introduce several key methods of scanning electrochemical microscopy(SECM)in its applications towards electrocatalysis.A brief history and a handful of seminal works in the SECM field is introduced in advancing the synthetic designs of electrocatalysts and elucidation of the operating mechanism.New developments in nano-sizing of the electrodes in attempts for improved spatial resolution of SECM is also introduced,and the application of nanoelectrodes towards the investigation of formerly inaccessible single catalytic entities is shared.展开更多
Au nanorods have been successfully synthesized at 90 ℃ by using hexadecyltrimethylammonium bromide （CTAB） and benzyldimethylammoniumchloride hydrate （BDAC） co-surfactant. At 90 ℃, the reaction time was less than...Au nanorods have been successfully synthesized at 90 ℃ by using hexadecyltrimethylammonium bromide （CTAB） and benzyldimethylammoniumchloride hydrate （BDAC） co-surfactant. At 90 ℃, the reaction time was less than 10 s, and the longitudinal surface plasmon absorption band could vary between 680 and 770 nm by adjusting the molar ratio of BDAC to CTAB from 2 to 0.5. At 90 ℃, nanorods with a longitudinal surface plasmon absorption peak of 770 nm can be obtained when the molar ratio of BDAC to CTAB was 3：2.展开更多
Metal hydroxides （MAH） consisting of magnesium hydroxide and aluminum hydroxide with a mass ratio of 1：2 were surface-modified by y-diethoxyphosphorous ester propyldiethoxymethylsilane, boric acid and diphenylsilan...Metal hydroxides （MAH） consisting of magnesium hydroxide and aluminum hydroxide with a mass ratio of 1：2 were surface-modified by y-diethoxyphosphorous ester propyldiethoxymethylsilane, boric acid and diphenylsilanediol in xylene under dibutyl tin dilaurate catalyst at 140 ℃. Phosphorus, silicon and boron elements covalently bonded to metal hydroxide particles were detected by X-ray photoelectron spectroscopy. The degradation behavior of the surface-modified MAH was characterized by thermogravimetric analysis. The results show that linear low density polyethylene （LLDPE） composite, filled with 50% （mass fraction） of MAH modified by 5.0% （mass fraction） of modifiers, passes the V-0 rating of UL-94 test and shows the limited oxygen index of 34%, and its heat release rate and average effective heat combustion in a cone calorimeter measurement decrease obviously; The mechanical properties of MAH can be improved by surface-modification. The uniform dispersion of particles and strong interfacial bonding between particles and matrix are obtained.展开更多
文摘This paper discusses the coloration process on the stainless steel and the properties of the film. The compositions, morphology and structure of colored films on stainless steel are studied by using SEM,AES,AFM,STM. The diffusion controlled mechanisms of films and calculation formula of surface electropotential difference are discussed.
基金Supported by the National Natural Science Foundation of China(41302132)Training Programmes of Innovation and Entrepreneurship for Undergraduates of Yunnan Province(Grant No.201510674042)the Introduced Talents Foundation of Kunming University of Science and Technology(KKSY201205160)
文摘Adsorption process is acknowledged as an effective option for phenolic wastewater treatment. In this work, the activated carbon （AC） samples after thermal modification were prepared by using muffle furnace. The phenol ad- sorption kinetics and equilibrium measurements were carried out under static conditions at temperature ranging from 25 to 55 ~C. The test results show that the thermal modification can enhance phenol adsorption on AC samples. The porous structure and surface chemistry analyses indicate that the decay in pore morphology and decrease of total oxygen-containing functional groups are found for the thermal modified AC samples. Thus, it can be further inferred that the decrease of total oxygen-containing functional groups on the modified AC sam- ples is the main reason for the enhanced phenol adsorption capacity. For both the raw sample and the optimum modified AC sample at 900 ~C, the pseudo-second order kinetics and Langmuir models are found to fit the exper- imental data very well. The maximum phenol adsorption capacity of the optimum modified AC sample can reach 144,93 mg.g ~ which is higher than that of the raw sample, i.e. 119.53 mg.g 1. Adsorption thermodynamics analysis confirms that the phenol adsorption on the optimum modified AC sample is an exothermic process and mainly via physical adsorption.
文摘Development of reaction-tailored electrocatalysts is becoming increasingly important as energy and environment are among key issues governing our sustainable future.Electrocatalysts are inherently optimized for application towards reactions of interest in renewable energy,such as those involved in water splitting and artificial photosynthesis,owing to its energy efficiency,simple fabrication,and ease of operation.In this view,it is important to secure logical design principles for the synthesis of electrocatalysts for various reactions of interest,and also understand their catalytic mechanisms in the respective reactions for improvements in further iterations.In this review,we introduce several key methods of scanning electrochemical microscopy(SECM)in its applications towards electrocatalysis.A brief history and a handful of seminal works in the SECM field is introduced in advancing the synthetic designs of electrocatalysts and elucidation of the operating mechanism.New developments in nano-sizing of the electrodes in attempts for improved spatial resolution of SECM is also introduced,and the application of nanoelectrodes towards the investigation of formerly inaccessible single catalytic entities is shared.
文摘Au nanorods have been successfully synthesized at 90 ℃ by using hexadecyltrimethylammonium bromide （CTAB） and benzyldimethylammoniumchloride hydrate （BDAC） co-surfactant. At 90 ℃, the reaction time was less than 10 s, and the longitudinal surface plasmon absorption band could vary between 680 and 770 nm by adjusting the molar ratio of BDAC to CTAB from 2 to 0.5. At 90 ℃, nanorods with a longitudinal surface plasmon absorption peak of 770 nm can be obtained when the molar ratio of BDAC to CTAB was 3：2.
基金Project(20574020) supported by the National Natural Science Foundation of ChinaProject(20061001) supported by the Opening Project of the Key Laboratory of Polymer Processing Engineering, Ministry of Education, ChinaProject (20060106-2) supported by Guangdong Key Projects
文摘Metal hydroxides （MAH） consisting of magnesium hydroxide and aluminum hydroxide with a mass ratio of 1：2 were surface-modified by y-diethoxyphosphorous ester propyldiethoxymethylsilane, boric acid and diphenylsilanediol in xylene under dibutyl tin dilaurate catalyst at 140 ℃. Phosphorus, silicon and boron elements covalently bonded to metal hydroxide particles were detected by X-ray photoelectron spectroscopy. The degradation behavior of the surface-modified MAH was characterized by thermogravimetric analysis. The results show that linear low density polyethylene （LLDPE） composite, filled with 50% （mass fraction） of MAH modified by 5.0% （mass fraction） of modifiers, passes the V-0 rating of UL-94 test and shows the limited oxygen index of 34%, and its heat release rate and average effective heat combustion in a cone calorimeter measurement decrease obviously; The mechanical properties of MAH can be improved by surface-modification. The uniform dispersion of particles and strong interfacial bonding between particles and matrix are obtained.
