The measurement and observation for this study were carried out by using a three-dimensional (u, v, w) Sonic anemometer (IAP-SA 485), at Forest Ecosystem Opened Research Station of Changbai Mountains (12828扙 and 4224...The measurement and observation for this study were carried out by using a three-dimensional (u, v, w) Sonic anemometer (IAP-SA 485), at Forest Ecosystem Opened Research Station of Changbai Mountains (12828扙 and 4224?N, Jilin Province, P. R. China) in August 2001. The basic characteristics of turbulence, such as turbulence intensity, atmospheric stability, time scales, and convection state, near the forest floor were analyzed. It is concluded that the airflow near forest floor is characterized by high intermittence and asymmetry, and the active and upward movement takes the leading position. Near forest floor, the vertical turbulence is retained and its time scale and length scale are much less than that of u, v components. The eddy near forest floor shows a flat structure and look like a ’Disk’. Buoyancy plays a leading role in the generation and maintenance of local turbulence展开更多
A speed sensorless vector control system of induction motor with estimated rotor speed and rotor flux using a new reduced order extended Kalman filter is proposed. With this method, two rotor flux components are sele...A speed sensorless vector control system of induction motor with estimated rotor speed and rotor flux using a new reduced order extended Kalman filter is proposed. With this method, two rotor flux components are selected as the state variables, and the rotor speed as an estimated parameter is regarded as an augmented state variable. The algorithm with reduced order decreases the computational complexity and makes the proposed estimator feasible to be implemented in real time. The simulation results show high accuracy of the estimation algorithm and good performance of speed control, and verify the usefulness of the proposed algorithm.展开更多
The theory and its method of machining parameter optimization for high-speed machining are studied. The machining data collected from workshops, labs and references are analyzed. An optimization method based on the ge...The theory and its method of machining parameter optimization for high-speed machining are studied. The machining data collected from workshops, labs and references are analyzed. An optimization method based on the genetic algorithm (GA) is investigated. Its calculation speed is faster than that of traditional optimization methods, and it is suitable for the machining parameter optimization in the automatic manufacturing system. Based on the theoretical studies, a system of machining parameter management and optimization is developed. The system can improve productivity of the high-speed machining centers.展开更多
In order to provide instructions for the calculation of the propeller induced velocity in the study of the hull-propeller interaction using the body force approach,three methods were used to calculate the propeller in...In order to provide instructions for the calculation of the propeller induced velocity in the study of the hull-propeller interaction using the body force approach,three methods were used to calculate the propeller induced velocity：1） Reynolds-Averaged Navier-Stokes（RANS） simulation of the self-propulsion test,2） RANS simulation of the propeller open water test,and 3） momentum theory of the propeller.The results from the first two methods were validated against experimental data to assess the accuracy of the computed flow field.The thrust identity method was adopted to obtain the advance velocity,which was then used to derive the propeller induced velocity from the total velocity field.The results computed by the first two approaches were close,while those from the momentum theory were significantly overestimated.The presented results could prove to be useful for further calculations of self-propulsion using the body force approach.展开更多
The optimum control strategy and the saving potential of all variable chiller plant under the conditions of changing building cooling load and cooling water supply temperature were investigated. Based on a simulation ...The optimum control strategy and the saving potential of all variable chiller plant under the conditions of changing building cooling load and cooling water supply temperature were investigated. Based on a simulation model of water source chiller plant established in dynamic transient simulation program (TRNSYS),the four-variable quadratic orthogonal regression experiments were carried out by taking cooling load,cooling water supply temperature,cooling water flow rate and chilled water flow rate as variables,and the fitting formulas expressing the relationships between the total energy consumption of chiller plant with the four selected parameters was obtained. With the SAS statistical software and MATHEMATICA mathematical software,the optimal chilled water flow rate and cooling water flow rate which result in the minimum total energy consumption were determined under continuously varying cooling load and cooling water supply temperature. With regard to a chiller plant serving an office building in Shanghai,the total energy consumptions under different control strategies were computed in terms of the forecasting function of cooling load and water source temperature. The results show that applying the optimal control strategy to the chiller plant can bring a saving of 23.27% in power compared with the corresponding conventional variable speed plant,indicating that the optimal control strategy can improve the energy efficiency of chiller plant.展开更多
A speed-sensorless vector control system for induction machines （IMs）is presented, According to the vector control theory of IMs, the rotor flux is estimated based on a flux observer,and the speed is estimated throu...A speed-sensorless vector control system for induction machines （IMs）is presented, According to the vector control theory of IMs, the rotor flux is estimated based on a flux observer,and the speed is estimated through the method of q-axis rotor flux converging on zero with proportional integral regulator, A 0.75 kW,50 Hz,two-pole induction machine was used in the simulation and experimental verification, The simulation model was constructed in Matlab. A series of tests were performed in the field weakening region, for both no-load and loaded operation. The estimated speed tracks the actual speed well in the based speed region and field weakening region （ 1 per unit value to 4 per unit value）. The small estimation error of residual speed is due to the existence of slip.展开更多
The sound velocity of seafloor sediments from shallow seas can provide important information for harbor design, and ocean and seacoast engineering projects. In this study, in situ measurements were used to obtain accu...The sound velocity of seafloor sediments from shallow seas can provide important information for harbor design, and ocean and seacoast engineering projects. In this study, in situ measurements were used to obtain accurate sediment sound velocities at 45 stations offshore of Qingdao. The relationships between the sound velocity and granular properties of the seafloor sediments were analyzed. Sound velocity showed an increase with the sand content, sand-clay ratio, and sorting coefficient; and a nonlinear decreasing trend with increasing mean grain size and clay content. We plotted a sound velocity distribution map, which shows that the sound velocity was closely related to the geological environment. Previous empirical equations suggested by Hamilton, Anderson, and Liu were used to calculate the velocity with grain size. A comparison between the measured and calculated velocities indicates that the empirical equations have territorial limitations, and extensive data are essential to establish global empirical equations. Future work includes the calibration of the laboratory acoustic measurements with an in situ technique.展开更多
T he estuary and coast is an area where the land and the sea interact and a place in which human beings frequently move about so that understanding and controlling the change and development modes of the coastal landf...T he estuary and coast is an area where the land and the sea interact and a place in which human beings frequently move about so that understanding and controlling the change and development modes of the coastal landform plays a vital part in exploiting and protecting coastal resources. A model is the generalization and abstraction of objective things. This paper summarizes four methods for the landform development of the tidal shore and underwater delta, mainly discusses the model’s structural elements, and presents their specific application on the basis of the authors’ case study. With the application of the profile model, the dynamic change of coastal landform can be clearly seen by contrasting the different profiles of different years. Through the shrinking, expanding and transformation of the isobath, plane model is used to study the macro-change of the shoal and the coastal landform. Speed model is an efficient means to analyze the trend of erosion and deposition and the local change in a great area of the sea. Statistical survey model is a static analysis, which can be used to establish the relationship between the erosion and deposition of the shoal and the altitude and slope of survey spot.展开更多
Background： Many studies examining individual-level correlates in youth utilize self-report rather than objective measures of physical activity （PA）. This utilization of self-report may result in associations that ...Background： Many studies examining individual-level correlates in youth utilize self-report rather than objective measures of physical activity （PA）. This utilization of self-report may result in associations that are not present when examining objectively measured PA. The present study investigates the relationship between hypothesized correlates of PA with objectively and subjectively measured PA. Methods： Participating children （n 232, 101 males, mean age - 12.3 years） provided a minimum of four monitored days of PA （via accelerometer） and completed a survey assessing moderate-to-vigorous physical activity （MVPA）, sport competence, appearance, enjoyment, and self-efficacy. Height and weight were measured and body mass index （BMI） was calculated. Results： Hierarchical regression models controlling for sex, race, and BMI Z-score showed that only sex and BMI Z-score were significant correlates of objective MVPA while only sex was a significant correlate of objective total PA. However, in a separate model examining the relationship with subjective MVPA, enjoyment of PA and self-efficacy for PA were the only significant correlates of self-reported PA. Conclusion： Measuring MVPA via self-report versus accelerometry produces considerably different results in a sample of young adolescents. Future studies should use caution when selecting outcome measures if the intent is to identify modifiable correlates of MVPA in youth.展开更多
The Java-Sumatra upwelling is one of the most important upwelling systems in the Indian Ocean, with maximum upwelling intensity in July through August. To estimate the nitrate supplied by upwelling, we developed a thr...The Java-Sumatra upwelling is one of the most important upwelling systems in the Indian Ocean, with maximum upwelling intensity in July through August. To estimate the nitrate supplied by upwelling, we developed a three-dimensional hydrodynamic model to calculate the mean vertical speed and determine the depth of upwelling. We used in-situ vertical nitrate profiles to assess nitrate concentration in the upwelled waters, and calculated the nitrate supply as the product of nitrate concentration and vertical transport obtained from the numerical model. The calculated result represents potential new production generated in the upwelling region. We found that on the event time scale (monthly) of Java-Sumatra upwelling, water brought to the surface originated from locations 100-m deep, giving a nitrate supply of 93.77×10 3mol/s and potential new production of 1.02×10 14gC/a.展开更多
This study is concerned with the numerical simulation of the flow through an open type cross-flow runner of a nano-hydraulic turbine driven by rapid and shallow stream. It employs the two-dimensional particle method, ...This study is concerned with the numerical simulation of the flow through an open type cross-flow runner of a nano-hydraulic turbine driven by rapid and shallow stream. It employs the two-dimensional particle method, which was used for the flow simulation of a small-scale hydraulic turbine of impulse-type in the prior study. The tip speed ratio 2, defined as the ratio of the runner tip speed to the water stream velocity upstream of the runner, ranges from 0.1 to 0.8. The simulated flow at 2 = 0.5 is confirmed to agree well with the experimentally visualized one. The effect of 2 on the flows inside the rotating cascade as well as around the runner is clarified. The turbine performance, calculated by using the simulated flow, is also highlighted to agree almost with the measurement. These demonstrate that the present simulation method is indeed applicable to the development of open type cross-flow runner of nano-hydraulic turbine utilizing rapid and shallow stream.展开更多
基金This study was supported by the grand of the Knowledge Innovation Program of the Chinese Academy of Sciences (KZCX1-SW-01) and National Natural Science Foundation (30070158).
文摘The measurement and observation for this study were carried out by using a three-dimensional (u, v, w) Sonic anemometer (IAP-SA 485), at Forest Ecosystem Opened Research Station of Changbai Mountains (12828扙 and 4224?N, Jilin Province, P. R. China) in August 2001. The basic characteristics of turbulence, such as turbulence intensity, atmospheric stability, time scales, and convection state, near the forest floor were analyzed. It is concluded that the airflow near forest floor is characterized by high intermittence and asymmetry, and the active and upward movement takes the leading position. Near forest floor, the vertical turbulence is retained and its time scale and length scale are much less than that of u, v components. The eddy near forest floor shows a flat structure and look like a ’Disk’. Buoyancy plays a leading role in the generation and maintenance of local turbulence
文摘A speed sensorless vector control system of induction motor with estimated rotor speed and rotor flux using a new reduced order extended Kalman filter is proposed. With this method, two rotor flux components are selected as the state variables, and the rotor speed as an estimated parameter is regarded as an augmented state variable. The algorithm with reduced order decreases the computational complexity and makes the proposed estimator feasible to be implemented in real time. The simulation results show high accuracy of the estimation algorithm and good performance of speed control, and verify the usefulness of the proposed algorithm.
文摘The theory and its method of machining parameter optimization for high-speed machining are studied. The machining data collected from workshops, labs and references are analyzed. An optimization method based on the genetic algorithm (GA) is investigated. Its calculation speed is faster than that of traditional optimization methods, and it is suitable for the machining parameter optimization in the automatic manufacturing system. Based on the theoretical studies, a system of machining parameter management and optimization is developed. The system can improve productivity of the high-speed machining centers.
基金Supported by European Union FP7 program,ICT-231646,SHOAL: Search and monitoring of Harmful contaminants, Other pollutants And Leaks in vessels in port using a swarm of robotic fish
文摘In order to provide instructions for the calculation of the propeller induced velocity in the study of the hull-propeller interaction using the body force approach,three methods were used to calculate the propeller induced velocity：1） Reynolds-Averaged Navier-Stokes（RANS） simulation of the self-propulsion test,2） RANS simulation of the propeller open water test,and 3） momentum theory of the propeller.The results from the first two methods were validated against experimental data to assess the accuracy of the computed flow field.The thrust identity method was adopted to obtain the advance velocity,which was then used to derive the propeller induced velocity from the total velocity field.The results computed by the first two approaches were close,while those from the momentum theory were significantly overestimated.The presented results could prove to be useful for further calculations of self-propulsion using the body force approach.
基金Project(G-0805-10156) supported by US Energy Foundation
文摘The optimum control strategy and the saving potential of all variable chiller plant under the conditions of changing building cooling load and cooling water supply temperature were investigated. Based on a simulation model of water source chiller plant established in dynamic transient simulation program (TRNSYS),the four-variable quadratic orthogonal regression experiments were carried out by taking cooling load,cooling water supply temperature,cooling water flow rate and chilled water flow rate as variables,and the fitting formulas expressing the relationships between the total energy consumption of chiller plant with the four selected parameters was obtained. With the SAS statistical software and MATHEMATICA mathematical software,the optimal chilled water flow rate and cooling water flow rate which result in the minimum total energy consumption were determined under continuously varying cooling load and cooling water supply temperature. With regard to a chiller plant serving an office building in Shanghai,the total energy consumptions under different control strategies were computed in terms of the forecasting function of cooling load and water source temperature. The results show that applying the optimal control strategy to the chiller plant can bring a saving of 23.27% in power compared with the corresponding conventional variable speed plant,indicating that the optimal control strategy can improve the energy efficiency of chiller plant.
文摘A speed-sensorless vector control system for induction machines （IMs）is presented, According to the vector control theory of IMs, the rotor flux is estimated based on a flux observer,and the speed is estimated through the method of q-axis rotor flux converging on zero with proportional integral regulator, A 0.75 kW,50 Hz,two-pole induction machine was used in the simulation and experimental verification, The simulation model was constructed in Matlab. A series of tests were performed in the field weakening region, for both no-load and loaded operation. The estimated speed tracks the actual speed well in the based speed region and field weakening region （ 1 per unit value to 4 per unit value）. The small estimation error of residual speed is due to the existence of slip.
基金Supported by the National Special Research Fund for Non-Profit Marine Sector(No.200905025)
文摘The sound velocity of seafloor sediments from shallow seas can provide important information for harbor design, and ocean and seacoast engineering projects. In this study, in situ measurements were used to obtain accurate sediment sound velocities at 45 stations offshore of Qingdao. The relationships between the sound velocity and granular properties of the seafloor sediments were analyzed. Sound velocity showed an increase with the sand content, sand-clay ratio, and sorting coefficient; and a nonlinear decreasing trend with increasing mean grain size and clay content. We plotted a sound velocity distribution map, which shows that the sound velocity was closely related to the geological environment. Previous empirical equations suggested by Hamilton, Anderson, and Liu were used to calculate the velocity with grain size. A comparison between the measured and calculated velocities indicates that the empirical equations have territorial limitations, and extensive data are essential to establish global empirical equations. Future work includes the calibration of the laboratory acoustic measurements with an in situ technique.
基金supported by the National Great Science Project(2002CB412407)the National Science Foundation(40076027).
文摘T he estuary and coast is an area where the land and the sea interact and a place in which human beings frequently move about so that understanding and controlling the change and development modes of the coastal landform plays a vital part in exploiting and protecting coastal resources. A model is the generalization and abstraction of objective things. This paper summarizes four methods for the landform development of the tidal shore and underwater delta, mainly discusses the model’s structural elements, and presents their specific application on the basis of the authors’ case study. With the application of the profile model, the dynamic change of coastal landform can be clearly seen by contrasting the different profiles of different years. Through the shrinking, expanding and transformation of the isobath, plane model is used to study the macro-change of the shoal and the coastal landform. Speed model is an efficient means to analyze the trend of erosion and deposition and the local change in a great area of the sea. Statistical survey model is a static analysis, which can be used to establish the relationship between the erosion and deposition of the shoal and the altitude and slope of survey spot.
基金funded by the Centers for Disease Control and Prevention(K01-DP001126)
文摘Background： Many studies examining individual-level correlates in youth utilize self-report rather than objective measures of physical activity （PA）. This utilization of self-report may result in associations that are not present when examining objectively measured PA. The present study investigates the relationship between hypothesized correlates of PA with objectively and subjectively measured PA. Methods： Participating children （n 232, 101 males, mean age - 12.3 years） provided a minimum of four monitored days of PA （via accelerometer） and completed a survey assessing moderate-to-vigorous physical activity （MVPA）, sport competence, appearance, enjoyment, and self-efficacy. Height and weight were measured and body mass index （BMI） was calculated. Results： Hierarchical regression models controlling for sex, race, and BMI Z-score showed that only sex and BMI Z-score were significant correlates of objective MVPA while only sex was a significant correlate of objective total PA. However, in a separate model examining the relationship with subjective MVPA, enjoyment of PA and self-efficacy for PA were the only significant correlates of self-reported PA. Conclusion： Measuring MVPA via self-report versus accelerometry produces considerably different results in a sample of young adolescents. Future studies should use caution when selecting outcome measures if the intent is to identify modifiable correlates of MVPA in youth.
基金Supported by the Knowledge Innovation Program of Chinese Academy of Sciences (Nos. KZCX2-YW-Q11-02, LYQY200807)the National Natural Science Foundation of China (No. 40876093)
文摘The Java-Sumatra upwelling is one of the most important upwelling systems in the Indian Ocean, with maximum upwelling intensity in July through August. To estimate the nitrate supplied by upwelling, we developed a three-dimensional hydrodynamic model to calculate the mean vertical speed and determine the depth of upwelling. We used in-situ vertical nitrate profiles to assess nitrate concentration in the upwelled waters, and calculated the nitrate supply as the product of nitrate concentration and vertical transport obtained from the numerical model. The calculated result represents potential new production generated in the upwelling region. We found that on the event time scale (monthly) of Java-Sumatra upwelling, water brought to the surface originated from locations 100-m deep, giving a nitrate supply of 93.77×10 3mol/s and potential new production of 1.02×10 14gC/a.
文摘This study is concerned with the numerical simulation of the flow through an open type cross-flow runner of a nano-hydraulic turbine driven by rapid and shallow stream. It employs the two-dimensional particle method, which was used for the flow simulation of a small-scale hydraulic turbine of impulse-type in the prior study. The tip speed ratio 2, defined as the ratio of the runner tip speed to the water stream velocity upstream of the runner, ranges from 0.1 to 0.8. The simulated flow at 2 = 0.5 is confirmed to agree well with the experimentally visualized one. The effect of 2 on the flows inside the rotating cascade as well as around the runner is clarified. The turbine performance, calculated by using the simulated flow, is also highlighted to agree almost with the measurement. These demonstrate that the present simulation method is indeed applicable to the development of open type cross-flow runner of nano-hydraulic turbine utilizing rapid and shallow stream.
