Ti−Al−V−Nb alloys with the cluster formula,12[Al−Ti_(12)](AlTi_(2))+5[Al−Ti1_(4)](V,Nb)2Ti,were designed by replacing V with Nb based on the Ti−6Al−4V alloy.Single-track cladding layers and bulk samples of the alloys ...Ti−Al−V−Nb alloys with the cluster formula,12[Al−Ti_(12)](AlTi_(2))+5[Al−Ti1_(4)](V,Nb)2Ti,were designed by replacing V with Nb based on the Ti−6Al−4V alloy.Single-track cladding layers and bulk samples of the alloys with Nb contents ranging from 0 to 6.96 wt.%were prepared by laser additive manufacturing to examine their formability,microstructure,and mechanical properties.For single-track cladding layers,the addition of Nb increased the surface roughness slightly and decreased the molten pool height to improve its spreadability.The alloy,Ti−5.96Al−1.94V−3.54Nb(wt.%),exhibited better geometrical accuracy than the other alloys because its molten pool height was consistent with the spread layer thickness of the powder.The microstructures of the bulk samples contained similar columnar β-phase grains,regardless of Nb content.These grains grew epitaxially from the Ti substrate along the deposition direction,with basket-weaveα-phase laths within the columnar grains.Theα-phase size increased with increasing Nb contents,but its uniformity decreased.Along the deposition direction,the Vickers hardness increased from the substrate to the surface.The Ti−5.96Al−1.94V−3.54Nb alloy exhibited the highest Vickers hardness regardless of deposition position because of the optimal matching relationship between theα-phase size and its content among the designed alloys.展开更多
The design guideline for the air suction drawing system with auxiliary air was analyzed,a spunbonding nonwoven system named PADHL1-3200 was designed and polypropylene(PP) spunbonded nonwoven fabrics with excellent pro...The design guideline for the air suction drawing system with auxiliary air was analyzed,a spunbonding nonwoven system named PADHL1-3200 was designed and polypropylene(PP) spunbonded nonwoven fabrics with excellent properties were achieved after many trial runs.On the other hand,the suction air velocity(VA) was calculated and the influence of VA on the bonding strengh of PP nonwoven fabrics was studied as well.It was found that VA is 1.5-2.5 times of the spinning velocity.With the increase of VA,PP fibers become finer and the bonding strength of PP nonwoven fabrics increases as well.展开更多
In this paper, we conduct theoretical analysis and literature review applications on the form innovation design and implementation of secondary reconstruction for cool core fabric. At present, due to the development o...In this paper, we conduct theoretical analysis and literature review applications on the form innovation design and implementation of secondary reconstruction for cool core fabric. At present, due to the development of The Times and the progress of science and technology, people＇ s aesthetic concept also transformed, functional and decorative fabric art aesthetic has been raised to an important level, but also strong. Second fabric design is refers to the use of various traditional and high-tech means to the existing fabric to open out the design of the processing, make its surface rich visual texture and touch skin texture. Our method is effective and novel, we will try to make it into real-world applications in the future.展开更多
To achieve the purpose of applying design patterns which are various in ldnd and constant in changing in MDA from idea and application, one way is used to solve the problem of pattern disappearance which occurs at the...To achieve the purpose of applying design patterns which are various in ldnd and constant in changing in MDA from idea and application, one way is used to solve the problem of pattern disappearance which occurs at the process of pattern instantiation, to guarantee the independence of patterns, and at the same time, to apply this process to multiple design pattems. To solve these two problons, the modeling method of design pattern traits based on meta-models is adopted, i.e., to divide the basic operations into atoms in the metamodel tier and then combine the atoms to complete design pattem units meta-models withtout business logic. After one process of conversion, the purpose of making up various pattem traits meta-model and dividing business logic and pattern logic is achieved.展开更多
基金the National Key Research and Development Program of China(No.2016YFB1100103)。
文摘Ti−Al−V−Nb alloys with the cluster formula,12[Al−Ti_(12)](AlTi_(2))+5[Al−Ti1_(4)](V,Nb)2Ti,were designed by replacing V with Nb based on the Ti−6Al−4V alloy.Single-track cladding layers and bulk samples of the alloys with Nb contents ranging from 0 to 6.96 wt.%were prepared by laser additive manufacturing to examine their formability,microstructure,and mechanical properties.For single-track cladding layers,the addition of Nb increased the surface roughness slightly and decreased the molten pool height to improve its spreadability.The alloy,Ti−5.96Al−1.94V−3.54Nb(wt.%),exhibited better geometrical accuracy than the other alloys because its molten pool height was consistent with the spread layer thickness of the powder.The microstructures of the bulk samples contained similar columnar β-phase grains,regardless of Nb content.These grains grew epitaxially from the Ti substrate along the deposition direction,with basket-weaveα-phase laths within the columnar grains.Theα-phase size increased with increasing Nb contents,but its uniformity decreased.Along the deposition direction,the Vickers hardness increased from the substrate to the surface.The Ti−5.96Al−1.94V−3.54Nb alloy exhibited the highest Vickers hardness regardless of deposition position because of the optimal matching relationship between theα-phase size and its content among the designed alloys.
文摘The design guideline for the air suction drawing system with auxiliary air was analyzed,a spunbonding nonwoven system named PADHL1-3200 was designed and polypropylene(PP) spunbonded nonwoven fabrics with excellent properties were achieved after many trial runs.On the other hand,the suction air velocity(VA) was calculated and the influence of VA on the bonding strengh of PP nonwoven fabrics was studied as well.It was found that VA is 1.5-2.5 times of the spinning velocity.With the increase of VA,PP fibers become finer and the bonding strength of PP nonwoven fabrics increases as well.
文摘In this paper, we conduct theoretical analysis and literature review applications on the form innovation design and implementation of secondary reconstruction for cool core fabric. At present, due to the development of The Times and the progress of science and technology, people＇ s aesthetic concept also transformed, functional and decorative fabric art aesthetic has been raised to an important level, but also strong. Second fabric design is refers to the use of various traditional and high-tech means to the existing fabric to open out the design of the processing, make its surface rich visual texture and touch skin texture. Our method is effective and novel, we will try to make it into real-world applications in the future.
文摘To achieve the purpose of applying design patterns which are various in ldnd and constant in changing in MDA from idea and application, one way is used to solve the problem of pattern disappearance which occurs at the process of pattern instantiation, to guarantee the independence of patterns, and at the same time, to apply this process to multiple design pattems. To solve these two problons, the modeling method of design pattern traits based on meta-models is adopted, i.e., to divide the basic operations into atoms in the metamodel tier and then combine the atoms to complete design pattem units meta-models withtout business logic. After one process of conversion, the purpose of making up various pattem traits meta-model and dividing business logic and pattern logic is achieved.
