A new kind of flexible pneumatic wall-climbing robot,named WALKMAN-I,was proposed. WALKMAN-I is basically composed of a flexible pneumatic actuator (FPA),a flexible pneumatic spherical joint and six suction cups. It h...A new kind of flexible pneumatic wall-climbing robot,named WALKMAN-I,was proposed. WALKMAN-I is basically composed of a flexible pneumatic actuator (FPA),a flexible pneumatic spherical joint and six suction cups. It has many characteristics of low-cost,lightweight,simple structure and good flexibility. Its operating principle was introduced. Then three basic locomotion modes,which are linear motion,curvilinear motion and crossing the orthogonal planes,were presented. The safety conditions of WALKMAN-I were discussed and built. Finally,the control system was designed and experiments were carried out. Experimental results show that WALKMAN-I is able to climb on the vertical wall surface along a straight line or a curved path,and has the ability of crossing orthogonal planes and obstacles. The maximum rotation angle reaches 90°,the maximum velocity reaches 5 mm/s,and the rotation angle and the moving velocity of WALKMAN-I can be easily controlled.展开更多
A novel algorithm for a rotation invariant template matching is proposed when the fluctuating scope of the rotation angle is limited within the region of [-20°,20°]. The matching candidates are selected usin...A novel algorithm for a rotation invariant template matching is proposed when the fluctuating scope of the rotation angle is limited within the region of [-20°,20°]. The matching candidates are selected using a computationally low cost improved correlation algorithm. "AND" operation is adopted to reduce the computational cost. Therefore the algorithm improves the matching speed consumedly. The simulation results verify the efficiency of the proposed method. Moreover,when the size of reference image is fixed,the advantage of this time-saving algorithm is more obvious as the increase of the size of the real time image. The matching speed of the proposed method is over 20 times faster than the speed of the two-level pyramid decomposing accelerating method.展开更多
The technological process of compact spinning and the compact procedure of fiber band in compact field are briefly illustrated. The motions of fiber band in compact field are discussed theoretically from which tilting...The technological process of compact spinning and the compact procedure of fiber band in compact field are briefly illustrated. The motions of fiber band in compact field are discussed theoretically from which tilting angle of suction slot in profile tube, additional twists created by fiber band’s rotating around its own axis and ultimate twists in compact yarn are deduced accordingly. The existence of additional twists is also verified through experiments.展开更多
This paper presents the automatic guidance system of an agricultural tractor and the side shift control of the attached row crop cultivator using electro-hydraulic actuators. In order to simulate the dynamic behaviour...This paper presents the automatic guidance system of an agricultural tractor and the side shift control of the attached row crop cultivator using electro-hydraulic actuators. In order to simulate the dynamic behaviour of the tractor along with the attached cultivator, the modified bicycle model was adopted. Steering angle sensor, fibre optic gyroscope （FOG） and RTK-DGPS technologies are assumed for measurements of the steering angle, yaw rate and the lateral position of the tractor, respectively. The kinematics model was used for the implement. In this study four cascade controllers were designed and simulated for tractor guidance which consists ofPD, PD, P and PID controllers. Other PI and PID controllers also had been designed for implement side shifting purpose. Then, these two systems were combined and the performance of the whole system was evaluated through the simulation results. According to the results tractor reaches the desired path after less than 10 seconds. Simulations showed that the maximum deviation of the tractor from the desired path was about 5 cm within this period. And the cultivator blades would follow the predetermined path with steady state error of about 5 cm too.展开更多
Spinning gait is valuable for quadruped robot,which can be used to avoid obstacles quickly for robot walking in unstructured environment. A kind of bionic flexible body is presented for quadruped robot to perform the ...Spinning gait is valuable for quadruped robot,which can be used to avoid obstacles quickly for robot walking in unstructured environment. A kind of bionic flexible body is presented for quadruped robot to perform the spinning gait. The spinning gait can be achieved by coordinated movement of body laterally bending and legs swing,which can improve the mobility of robot walking in the unstructured environments. The coordinated movement relationship between the body and the leg mechanism is presented. The stability of quadruped robot with spinning gait is analyzed based on the center of gravity( COG) projection method. The effect of different body bending angle on the stability of quadruped robot with spinning gait is mainly studied. For the quadruped robot walking with spinning gait,during one spinning gait cycle,the supporting polygon and the trajectory of COG projection point under different body bending angle are calculated. Finally,the stability margin of quadruped robot with spinning gait under different body bending angle is determined,which can be used to evaluate reasonableness of spinning gait parameters.展开更多
Recently, high heat density has become a problem in electronic devices. Therefore, high heat-transfer efficiency is required in copper heat exchangers. Improvement ofwettability is reported to improve the heat-transfe...Recently, high heat density has become a problem in electronic devices. Therefore, high heat-transfer efficiency is required in copper heat exchangers. Improvement ofwettability is reported to improve the heat-transfer efficiency. In previous studies, copper oxide layer improves the wettability. In this study, we focus on a copper oxide layer produced under warm conditions （from 200 to 300 ℃）, which are suitable oxidation conditions for improving wettability. Experimental results showed that the surface of the specimens was covered by the oxidation layer and took on a black color. Furthermore, the wettability was improved by the warm copper oxide layer. While, the surface roughness was approximately constant to each warm oxidized specimen. Whereat, the warm oxide layer was observed by SEM （sanning electron microscope）. The results from SEM observations showed that the warm copper oxide layer consisted of stacks and combinations of nanoscopic warm oxidation particles. Thus, the warm oxidation layer has nanoscopic surface asperities. It is seemed that these nanoscopic asperities improved the wettability.展开更多
In order to find out the influence of the instability of angular velocity of the rotating carrier itself on the stability of silicon micromachined gyroscope, the digital models for relative error of the high and low d...In order to find out the influence of the instability of angular velocity of the rotating carrier itself on the stability of silicon micromachined gyroscope, the digital models for relative error of the high and low damping gyroscope's output signal are given respectively, based on the motion equations of the silicon micromachined gyroscope. Theory proves that the output signal error of the silicon micromachined sensor is mainly caused by the instability of damping factor and the angular velocity of the rotating carrier itself. The experiment result indicates that the error of proportionality coefficient of output voltage which is caused by the instability of the angular velocity of the rotating carrier itself reaches to 4.1 %. Theoretical demonstration and experimental verification show that the instability of angular velocity of the rotating carrier itself has an important effect on the stability of low damping silicon micromachined gyroscope.展开更多
In this paper, we study the kinematic mechanism and path planning for a two-caster nonholonomic vehicle (the Essboard) which is a recent variant of skateboard. Different from the most studied Snakeboard, the Essboard ...In this paper, we study the kinematic mechanism and path planning for a two-caster nonholonomic vehicle (the Essboard) which is a recent variant of skateboard. Different from the most studied Snakeboard, the Essboard consists of a torsion bar and two platforms, each of which contains a pedal and a caster. We first investigate the relationship between the tilt angles of the pedals and the wheel directions of the casters. This relationship reveals how to control the wheel directions by adjusting the tilt angles. Next, the rotational radius of the Essboard is derived for a given pair of tilt angles of both pedals. The rotational radius of the Essboard is much different than that of the Snakeboard. Then we develop a path-planning algorithm for the Essboard to move from a start position to the goal, using a series of consecutively connected arcs, which are tangent to each other at the connected points. It is shown from a kinematic point of view that the path planning of the Essboard can be solved by a series of pairs of pedals' tilt angles. Three experiments are conducted to confirm the correctness of the main results. The results in this paper are a foundation for further study of the Essboard.展开更多
From Kaula's Earth gravitational potential written in classical orbital elements, the unified ideal model of mean motion resonance of artificial satellites due to geopotential perturbations is developed in this pa...From Kaula's Earth gravitational potential written in classical orbital elements, the unified ideal model of mean motion resonance of artificial satellites due to geopotential perturbations is developed in this paper first, through a suitable sequence of canonical transformations constructed by implicit functions. This unified ideal orbital resonance model is valid for all the commensurabilities between the rotational angular velocity of the Earth and the angular velocities of mean orbital motion of artificial satellites with arbitrary inclination and small eccentricity, and can be also transformed into Garfinkel's general expression of ideal resonance problem. Then 1/1 resonance of the 24-hour satellite with arbitrary inclination and small eccentricity is analyzed under the effect of harmonics of J2 and J 22 of the geopotential, based on the unified ideal model of mean motion resonance. The analytical expressions of the libration period and libration half width of the 1/1 resonance of the 24-hour satellite with arbitrary inclination and small eccentricity are presented.展开更多
基金Project (50575206) supported by the National Natural Science Foundation of ChinaProject (BX102716) supported by Xinmiao Program of Zhejiang Province, China
文摘A new kind of flexible pneumatic wall-climbing robot,named WALKMAN-I,was proposed. WALKMAN-I is basically composed of a flexible pneumatic actuator (FPA),a flexible pneumatic spherical joint and six suction cups. It has many characteristics of low-cost,lightweight,simple structure and good flexibility. Its operating principle was introduced. Then three basic locomotion modes,which are linear motion,curvilinear motion and crossing the orthogonal planes,were presented. The safety conditions of WALKMAN-I were discussed and built. Finally,the control system was designed and experiments were carried out. Experimental results show that WALKMAN-I is able to climb on the vertical wall surface along a straight line or a curved path,and has the ability of crossing orthogonal planes and obstacles. The maximum rotation angle reaches 90°,the maximum velocity reaches 5 mm/s,and the rotation angle and the moving velocity of WALKMAN-I can be easily controlled.
基金the preparing Fund for defence equipment (No.6140517)
文摘A novel algorithm for a rotation invariant template matching is proposed when the fluctuating scope of the rotation angle is limited within the region of [-20°,20°]. The matching candidates are selected using a computationally low cost improved correlation algorithm. "AND" operation is adopted to reduce the computational cost. Therefore the algorithm improves the matching speed consumedly. The simulation results verify the efficiency of the proposed method. Moreover,when the size of reference image is fixed,the advantage of this time-saving algorithm is more obvious as the increase of the size of the real time image. The matching speed of the proposed method is over 20 times faster than the speed of the two-level pyramid decomposing accelerating method.
基金Sponsored by Shanghai Rising Star Program, No .02QF14005
文摘The technological process of compact spinning and the compact procedure of fiber band in compact field are briefly illustrated. The motions of fiber band in compact field are discussed theoretically from which tilting angle of suction slot in profile tube, additional twists created by fiber band’s rotating around its own axis and ultimate twists in compact yarn are deduced accordingly. The existence of additional twists is also verified through experiments.
文摘This paper presents the automatic guidance system of an agricultural tractor and the side shift control of the attached row crop cultivator using electro-hydraulic actuators. In order to simulate the dynamic behaviour of the tractor along with the attached cultivator, the modified bicycle model was adopted. Steering angle sensor, fibre optic gyroscope （FOG） and RTK-DGPS technologies are assumed for measurements of the steering angle, yaw rate and the lateral position of the tractor, respectively. The kinematics model was used for the implement. In this study four cascade controllers were designed and simulated for tractor guidance which consists ofPD, PD, P and PID controllers. Other PI and PID controllers also had been designed for implement side shifting purpose. Then, these two systems were combined and the performance of the whole system was evaluated through the simulation results. According to the results tractor reaches the desired path after less than 10 seconds. Simulations showed that the maximum deviation of the tractor from the desired path was about 5 cm within this period. And the cultivator blades would follow the predetermined path with steady state error of about 5 cm too.
基金Supported by the National Natural Science Foundation of China(No.51375289)Shanghai Municipal National Natural Science Foundation of China(No.13ZR1415500)Innovation Fund of Shanghai Education Commission(No.13YZ020)
文摘Spinning gait is valuable for quadruped robot,which can be used to avoid obstacles quickly for robot walking in unstructured environment. A kind of bionic flexible body is presented for quadruped robot to perform the spinning gait. The spinning gait can be achieved by coordinated movement of body laterally bending and legs swing,which can improve the mobility of robot walking in the unstructured environments. The coordinated movement relationship between the body and the leg mechanism is presented. The stability of quadruped robot with spinning gait is analyzed based on the center of gravity( COG) projection method. The effect of different body bending angle on the stability of quadruped robot with spinning gait is mainly studied. For the quadruped robot walking with spinning gait,during one spinning gait cycle,the supporting polygon and the trajectory of COG projection point under different body bending angle are calculated. Finally,the stability margin of quadruped robot with spinning gait under different body bending angle is determined,which can be used to evaluate reasonableness of spinning gait parameters.
文摘Recently, high heat density has become a problem in electronic devices. Therefore, high heat-transfer efficiency is required in copper heat exchangers. Improvement ofwettability is reported to improve the heat-transfer efficiency. In previous studies, copper oxide layer improves the wettability. In this study, we focus on a copper oxide layer produced under warm conditions （from 200 to 300 ℃）, which are suitable oxidation conditions for improving wettability. Experimental results showed that the surface of the specimens was covered by the oxidation layer and took on a black color. Furthermore, the wettability was improved by the warm copper oxide layer. While, the surface roughness was approximately constant to each warm oxidized specimen. Whereat, the warm oxide layer was observed by SEM （sanning electron microscope）. The results from SEM observations showed that the warm copper oxide layer consisted of stacks and combinations of nanoscopic warm oxidation particles. Thus, the warm oxidation layer has nanoscopic surface asperities. It is seemed that these nanoscopic asperities improved the wettability.
基金The author would like to thank the Nature Science Foundation of China (Grant No.60627001)the Beijing Key Laboratory for Sensor(No.KM200810772001)
文摘In order to find out the influence of the instability of angular velocity of the rotating carrier itself on the stability of silicon micromachined gyroscope, the digital models for relative error of the high and low damping gyroscope's output signal are given respectively, based on the motion equations of the silicon micromachined gyroscope. Theory proves that the output signal error of the silicon micromachined sensor is mainly caused by the instability of damping factor and the angular velocity of the rotating carrier itself. The experiment result indicates that the error of proportionality coefficient of output voltage which is caused by the instability of the angular velocity of the rotating carrier itself reaches to 4.1 %. Theoretical demonstration and experimental verification show that the instability of angular velocity of the rotating carrier itself has an important effect on the stability of low damping silicon micromachined gyroscope.
基金supported by the National Natural Science Foundation of China (Grant Nos. 51105012 and 61175079)
文摘In this paper, we study the kinematic mechanism and path planning for a two-caster nonholonomic vehicle (the Essboard) which is a recent variant of skateboard. Different from the most studied Snakeboard, the Essboard consists of a torsion bar and two platforms, each of which contains a pedal and a caster. We first investigate the relationship between the tilt angles of the pedals and the wheel directions of the casters. This relationship reveals how to control the wheel directions by adjusting the tilt angles. Next, the rotational radius of the Essboard is derived for a given pair of tilt angles of both pedals. The rotational radius of the Essboard is much different than that of the Snakeboard. Then we develop a path-planning algorithm for the Essboard to move from a start position to the goal, using a series of consecutively connected arcs, which are tangent to each other at the connected points. It is shown from a kinematic point of view that the path planning of the Essboard can be solved by a series of pairs of pedals' tilt angles. Three experiments are conducted to confirm the correctness of the main results. The results in this paper are a foundation for further study of the Essboard.
基金supported by the National Natural Science Foundation of China (Grant nos. 11033009, 11125315 and 11103086)
文摘From Kaula's Earth gravitational potential written in classical orbital elements, the unified ideal model of mean motion resonance of artificial satellites due to geopotential perturbations is developed in this paper first, through a suitable sequence of canonical transformations constructed by implicit functions. This unified ideal orbital resonance model is valid for all the commensurabilities between the rotational angular velocity of the Earth and the angular velocities of mean orbital motion of artificial satellites with arbitrary inclination and small eccentricity, and can be also transformed into Garfinkel's general expression of ideal resonance problem. Then 1/1 resonance of the 24-hour satellite with arbitrary inclination and small eccentricity is analyzed under the effect of harmonics of J2 and J 22 of the geopotential, based on the unified ideal model of mean motion resonance. The analytical expressions of the libration period and libration half width of the 1/1 resonance of the 24-hour satellite with arbitrary inclination and small eccentricity are presented.
