The removal of phosphorus in metallurgical grade silicon （MG-Si） by water vapor carried with high purity argon was examined. The effect of the nozzle types, refining time, refining temperature, refining gas temperat...The removal of phosphorus in metallurgical grade silicon （MG-Si） by water vapor carried with high purity argon was examined. The effect of the nozzle types, refining time, refining temperature, refining gas temperature and refining gas flow rate on the phosphorus removed was investigated by the self-designed gas blowing device. The optimal refining conditions are nozzle type of holes at bottom and side, refining time of 3 h, refining temperature of 1793 K, refining gas temperature of 373 K, refining gas flow rate of 2 L/min. Under these optimal conditions, the phosphorus content in MG-Si is reduced from 94×10^-6 initially to 11×10-6 （mass fraction）, which indicates that gas blowing refining is very effective to remove phosphorus in MG-Si.展开更多
By the directional solidification of metal-gas eutectic method（GASAR）,porous Cu-Mn alloy with oriented pores was fabricated successfully.The variation of pore structure was studied by experiments.The results show th...By the directional solidification of metal-gas eutectic method（GASAR）,porous Cu-Mn alloy with oriented pores was fabricated successfully.The variation of pore structure was studied by experiments.The results show that the pore structure is primarily dependent on the solidification mode（planar,columnar cellular,columnar dendritic,equiaxed dendritic）,which is controlled by the solidification process.By numerical simulation,it is noted that along with solidification,the solidification mode of the alloy transforms from cellular to columnar dendritic and finally to equiaxed dendritic.Through increasing melt temperature and mold preheating,the range of equiaxed dendrite could be decreased,which helps to extend the region of oriented pore structure.展开更多
Atmospheric corrosion of aluminum alloy 2024 （AA2024） with salt lake water was simulated through a laboratory- accelerated test of cyclic wet-dry and electrochemical techniques. Effects of the soluble magnesium salt...Atmospheric corrosion of aluminum alloy 2024 （AA2024） with salt lake water was simulated through a laboratory- accelerated test of cyclic wet-dry and electrochemical techniques. Effects of the soluble magnesium salt contained in the salt water were investigated by scanning electron microscope （SEM）, transmission electron microscope （TEM）, energy dispersive spectrometer （EDS）, electron probe micro analyzer （EPMA）, X-ray diffraction （XRD）, infrared transmission spectroscope （IR）, and atmospheric corrosion monitor （ACM）. The results showed that, with the deposition, atmospheric corrosion of AA2024 could occur when the relative humidity （RH） was lower than 30%. A main crystalline component of corrosion products, layered double hydroxides （LDH）, [Mg1-xAlx（OH）2]^x＋ Clx-·mH2O （LDH-C1）, was determined, which meant that magnesium ion played an important role in the corrosion process. It not only facilitated the corrosion as a result of deliquescence, but also was involved in the corrosion process as a reactant.展开更多
The effects of traveling magnetic field on degassing of aluminum alloys were investigated, and the critical radius of the pores was calculated. The results show that the critical radius of the pores decreases with inc...The effects of traveling magnetic field on degassing of aluminum alloys were investigated, and the critical radius of the pores was calculated. The results show that the critical radius of the pores decreases with increasing the magnetic density linearly when the traveling magnetic field is applied during solidification, and the use of traveling magnetic field promotes the heterogeneous nucleation of pores. After the gas dissolved in the metal liquid accumulates to form large bubbles, the traveling magnetic field forces the bubbles to the surface of molten metal, so the gas is easy to separate from the melt in the liquid stage. The number of pores in the sample decreases with increasing the intensity of traveling magnetic field.展开更多
Classification of plume and spatter images was studied to evaluate the welding stability. A high-speed camera was used to capture the instantaneous images of plume and spatters during high power disk laser welding. Ch...Classification of plume and spatter images was studied to evaluate the welding stability. A high-speed camera was used to capture the instantaneous images of plume and spatters during high power disk laser welding. Characteristic parameters such as the area and number of spatters, the average grayscale of a spatter image, the entropy of a spatter grayscale image, the coordinate ratio of the plume centroid and the welding point, the polar coordinates of the plume centroid were defined and extracted. Karhunen-Loeve transform method was used to change the seven characteristics into three primary characteristics to reduce the dimensions. Also, K-nearest neighbor method was used to classify the plume and spatter images into two categories such as good and poor welding quality. The results show that plume and spatter have a close relationship with the welding stability, and two categories could be recognized effectively using K-nearest neighbor method based on Karhunen-Loeve transform.展开更多
Totally 24 arbor tree species and 6 shrub species were measured on their absorption capacities to heavy metal Pb, Cd, Cr, and Hg by collecting and analyzing the leaves of trees along different streets in Harbin city i...Totally 24 arbor tree species and 6 shrub species were measured on their absorption capacities to heavy metal Pb, Cd, Cr, and Hg by collecting and analyzing the leaves of trees along different streets in Harbin city in Sept. to Oct. of 2003. The results showed that all the measured species had certain absorbency to the pollutants (Pb, Cd, Cr and Hg), but there existed significant difference in absorption capacity for different species to different pollutants. The measured tree species were classified into three categories by their absorption quantum of heavy metal pollutants. Among the species measured,Betula platyphylla, Ulmus pumila var.pendula, andPrunus persicaf.rubro-plena had high capacity in absorbing Pb;Populus xiahei, P. nigra var.Italica, P. alba x P. berolinensis andSalix matsudana had had high capacity in absorbing Cd;Phellodendron amurense, Syringa oblata, Salix matsudana, Pinus tabulaeformis var.mukdensis, Picea koraiensis, Prunus persica f.rubro-plena, P. triloba andAcer negundo, etc. had high capacity in absorption of Cr;Prunus triloba, Quercus mongolica, Salix matsudana, Sambucus williamsii, Pyrus ussuuriensis andSpiraea fritschiana were good at absorption of Hg. This study might offer scientific foundation for selection of urban afforestation species in different polluted conditions caused by heavy metals. Keywords Greening tree species - Heavy metal - Pollutants - Plumbum - Cadmium - Chromium - Mercury - Absorptivity CLC number S731.2 - X501 Document code A Foundation item: This study is financially supported by the Special Programme for Agriculture under Ministry of Chinese Science and Technology (No. 2002BA516A15-01).Biography: MU Li-qiang (1966-), female, Associate professor in Northeast Forestry University, Harbin 150040, P. R. China.Responsible editor: Zhu Hong展开更多
A self-invented atomization process, in which molten metal is atomized into powder by a high-velocity gas stream carrying solid particles as the atomization medium, was introduced. The characteristics of powders prepa...A self-invented atomization process, in which molten metal is atomized into powder by a high-velocity gas stream carrying solid particles as the atomization medium, was introduced. The characteristics of powders prepared by common gas atomization and dual-phase flow atomization under similar conditions were compared. The experimental results show that the dual-phase flow-atomized powders have average particle sizes that are one-half that of the common gas-atomized particles;additionally, they possess a finer microstructure and higher cooling rate under the same atomization gas pressure and the same gas flow. The Weber number in the crash criteria of liquid atomization is adopted to measure the crash ability of the atomization media. The Weber number of the dual-phase flow atomization medium is the sum of that of the gas and the solid particles. Furthermore, the critical equation of the crash model in dual-phase flow atomization is established, and the main regularities associated with this process were analyzed.展开更多
Wrought magnesium alloy sheets were butt welded with gas metal arc welding process. Pores in the weld were investigated under different welding parameters, the causes of pore formation were systematically disposed, an...Wrought magnesium alloy sheets were butt welded with gas metal arc welding process. Pores in the weld were investigated under different welding parameters, the causes of pore formation were systematically disposed, and the effects of porosity on the microstructure and mechanical properties of the joint were analyzed. The microstructure examination shows that the pores mainly appear close to the top or bottom part of the weld, and could connect to each other and lead to the formation of cracks in the welds. However, the pores can be controlled with proper welding parameters. The tensile testing results reveal that the average joint strength is close to or higher than that of the base metal. The microhardness in the weld can be even higher than that in the base metal due to the second ohase strengthening of β-Mg17（A1, Zn）12 formed in the weld.展开更多
The semi-solid slurry of AZ91 D magnesium alloy was prepared by gas bubbling process.The effect of processing parameters,including gas flow rate,cooling rate and stirring end temperature,on microstructure of AZ91 D se...The semi-solid slurry of AZ91 D magnesium alloy was prepared by gas bubbling process.The effect of processing parameters,including gas flow rate,cooling rate and stirring end temperature,on microstructure of AZ91 D semi-solid slurry was investigated.With increasing the gas flow rate from 0 to 5 L/min,the average size of primary α-Mg particles decreases from 119.1 to77.2μm and the average shape factor increases continuously from 0.1 to 0.596.The formation of non-dendritic primary α-Mg particles during gas bubbling is the result of combined effects of dendrite fragmentation and copious nucleation.With increasing the cooling rate from 3.6 to 14.6℃/min,the average particle size of primary α-Mg phase decreases from 105.0 to 68.1μm while the average shape factor peaks at 9.1℃/min.Both high and low cooling rates can induce dendritic growth of primary α-Mg particles.Changing the stirring end temperature from 590 to 595℃ has little effect on the average size and shape factor of primary α-Mg particles in AZ91 D semi-solid slurry.The insensitivity of semi-solid microstructures to the stirring end temperature is attributed to the sufficient quantity of primary particles formed in the melt.展开更多
Deposition of diamond inside the trenches or microchannels by chemical vapor deposition （CVD） is limited by the diffusion efficiency of important radical species for diamond growth （H, CH3） and the pore depth of t...Deposition of diamond inside the trenches or microchannels by chemical vapor deposition （CVD） is limited by the diffusion efficiency of important radical species for diamond growth （H, CH3） and the pore depth of the substrate template. By ultrasonic seeding with nanodiamond suspension, three-dimensional （3D） penetration structure diamond was successfully deposited in cylindrical microchannels of Cu template by hot-filament chemical vapor deposition. Micro-Raman spectroscopy and scanning electron microscopy （SEM） were used to characterize diamond film and the effects of microchannel depth on the morphology, grain size and growth rate of diamond film were comprehensively investigated. The results show that diamond quality and growth rate sharply decrease with the increase of the depth of cylindrical microchannel. Individual diamond grain develops gradually from faceted crystals into micrometer cluster, and finally to ballas-type nanocrystalline one. In order to modify the rapid decrease of diamond quality and growth rate, a new hot filament apparatus with a forced gas flow through Cu microchannels was designed. Furthermore, the growth of diamond film by new apparatus was compared with that without a forced gas flow, and the enhancement mechanism was discussed.展开更多
The friction and wear tests were performed using Nitinol 60 alloy pin sliding over GCr15 steel disk in a pin-on-disk tribometer system under PAO oil lubrication conditions. It was found that Nitinol 60 alloy can be lu...The friction and wear tests were performed using Nitinol 60 alloy pin sliding over GCr15 steel disk in a pin-on-disk tribometer system under PAO oil lubrication conditions. It was found that Nitinol 60 alloy can be lubricated well and has shown remarkable tribological performance. Average coefficient of friction （COF） of Nitinol 60 is 0.6 under dry friction; however, average COF decreases to 0.1 under PAO oil lubrication. SEM image of the worn surface shows that Nitinol 60 exhibits excellent wear resistance and the wear mechanism is mainly adhesive wear. Flow pattern of oil-air flow in oil pipe was simulated by FLUENT software with VOF model for acquiring working performance of oil-air lubrication. The optimum velocity of oil and air at the inlet was achieved, which provides the great proposal for the design of experiment of oil-air lubrication of Nitinol 60 alloy. The simulation results showed that the optimum annular flow of flow pattern was obtained when air velocity is 10 m/s and oil velocity is 0.05 m/s. The formation mechanism of annular flow was also discussed in the present study.展开更多
[Objective] This study aimed to analyze the volatile constituents in Lonicera japonica Thunb. from different origins. [Method] HP-5MS capillary columns were used and column temperature was controlled by a program. MS ...[Objective] This study aimed to analyze the volatile constituents in Lonicera japonica Thunb. from different origins. [Method] HP-5MS capillary columns were used and column temperature was controlled by a program. MS analysis was performed with EI and quadruple mass analyzer. The volatile constituents in L. japonica Thunb. were identified by NIST02 and Wiley275 libraries, and their relative contents were determined with chromatographic peak area normalization method. [Result] According to GC-MS total ion-current chromatograms, 35 volatile constituents were identified in L. japonica Thunb. from Guangxi Zhuang Autonomous Region, mainly including methyl linolenate, n-hexadecanoic acid and ζ-muurolene; 18 volatile constituents were identified in L. japonica Thunb. from Hunan Province, mainly including n-hexadecanoic acid, linoleic acid and α-curcumene. [Conclusion] Main volatile constituents in L. japonica Thunb. from two different origins varied significantly.展开更多
In order to recycle waste Sn-based alloys, the vapor-liquid phase equilibrium composition diagrams of Sn-Pb, Sn-Sb and Sn-Zn binary systems were calculated. The calculated results indicate that Pb, Sb and Zn can be se...In order to recycle waste Sn-based alloys, the vapor-liquid phase equilibrium composition diagrams of Sn-Pb, Sn-Sb and Sn-Zn binary systems were calculated. The calculated results indicate that Pb, Sb and Zn can be separated from Sn effectively. Based on the above calculation, the industrial experiments of vacuum distillation of Sn-Pb alloy, Sn-Pb-Sb alloy, Sn-Pb-Sb-As alloy, crude Sn and Sn-Zn alloy with different contents were carried out. The experimental results show that Pb(>99% Pb) and Sn(≤0.003% Pb) were obtained simultaneously while Sn-Pb alloy was subjected to vacuum distillation; the crude Sn(>90% Sn, ≤ 2% Pb, ≤6% Sb) and crude Pb(≤2% Sn) were obtained simultaneously while a single vacuum distillation was carried out for Sn-Pb-Sb alloy; the Pb and Bi contents in the Sn ingot(99.99% Sn) achieve the grade A of GB/T 728—2010 standard, more than 50% of As and Sb was removed after vacuum distillation of crude Sn; Zn(<0.002% Sn) and Sn(about 3% Zn) were obtained while vacuum distillation of Sn-Zn alloy was conducted at 1173 K, 20-30 Pa for 8-10 h.展开更多
The characteristics of hot filament chemical vapor deposition（HFCVD） diamond films are significantly influenced by the deposition parameters, such as the substrate temperature, total pressure and carbon concentratio...The characteristics of hot filament chemical vapor deposition（HFCVD） diamond films are significantly influenced by the deposition parameters, such as the substrate temperature, total pressure and carbon concentration. Orthogonal experiments were introduced to study the comprehensive effects of such three parameters on diamond films deposited on WC-Co substrates. Field emission scanning electron microscopy, atomic force microscopy and Raman spectrum were employed to analyze the morphology, growth rate and composition of as-deposited diamond films. The morphology varies from pyramidal to cluster features with temperature decreasing. It is found that the low total pressure is suitable for nano-crystalline diamond films growth. Moreover, the substrate temperature and total pressure have combined influence on the growth rate of the diamond films.展开更多
基金Project(51074043)supported by the National Natural Science Foundation of ChinaProject(2011BAE03B01)supported by the National Key Technology R&D Program of China
文摘The removal of phosphorus in metallurgical grade silicon （MG-Si） by water vapor carried with high purity argon was examined. The effect of the nozzle types, refining time, refining temperature, refining gas temperature and refining gas flow rate on the phosphorus removed was investigated by the self-designed gas blowing device. The optimal refining conditions are nozzle type of holes at bottom and side, refining time of 3 h, refining temperature of 1793 K, refining gas temperature of 373 K, refining gas flow rate of 2 L/min. Under these optimal conditions, the phosphorus content in MG-Si is reduced from 94×10^-6 initially to 11×10-6 （mass fraction）, which indicates that gas blowing refining is very effective to remove phosphorus in MG-Si.
基金Project(U0837603)supported by the NSFC-Yunnan Joint Foundation of ChinaProject(2092017)supported by the Natural Science Foundation of Beijing,China
文摘By the directional solidification of metal-gas eutectic method（GASAR）,porous Cu-Mn alloy with oriented pores was fabricated successfully.The variation of pore structure was studied by experiments.The results show that the pore structure is primarily dependent on the solidification mode（planar,columnar cellular,columnar dendritic,equiaxed dendritic）,which is controlled by the solidification process.By numerical simulation,it is noted that along with solidification,the solidification mode of the alloy transforms from cellular to columnar dendritic and finally to equiaxed dendritic.Through increasing melt temperature and mold preheating,the range of equiaxed dendrite could be decreased,which helps to extend the region of oriented pore structure.
基金Project(51131007) supported by the National Natural Science Foundation of China
文摘Atmospheric corrosion of aluminum alloy 2024 （AA2024） with salt lake water was simulated through a laboratory- accelerated test of cyclic wet-dry and electrochemical techniques. Effects of the soluble magnesium salt contained in the salt water were investigated by scanning electron microscope （SEM）, transmission electron microscope （TEM）, energy dispersive spectrometer （EDS）, electron probe micro analyzer （EPMA）, X-ray diffraction （XRD）, infrared transmission spectroscope （IR）, and atmospheric corrosion monitor （ACM）. The results showed that, with the deposition, atmospheric corrosion of AA2024 could occur when the relative humidity （RH） was lower than 30%. A main crystalline component of corrosion products, layered double hydroxides （LDH）, [Mg1-xAlx（OH）2]^x＋ Clx-·mH2O （LDH-C1）, was determined, which meant that magnesium ion played an important role in the corrosion process. It not only facilitated the corrosion as a result of deliquescence, but also was involved in the corrosion process as a reactant.
基金Project(2011CB610406)supported by the National Basic Research Program of ChinaProject(HIT.BRET1.2010008)supported by the Fundamental Research Funds for the Central Universities,China
文摘The effects of traveling magnetic field on degassing of aluminum alloys were investigated, and the critical radius of the pores was calculated. The results show that the critical radius of the pores decreases with increasing the magnetic density linearly when the traveling magnetic field is applied during solidification, and the use of traveling magnetic field promotes the heterogeneous nucleation of pores. After the gas dissolved in the metal liquid accumulates to form large bubbles, the traveling magnetic field forces the bubbles to the surface of molten metal, so the gas is easy to separate from the melt in the liquid stage. The number of pores in the sample decreases with increasing the intensity of traveling magnetic field.
基金Project (51175095) supported by the National Natural Science Foundation of ChinaProjects (10251009001000001,9151009001000020) supported by the Natural Science Foundation of Guangdong Province,ChinaProject (20104420110001) supported by the Specialized Research Fund for the Doctoral Program of Higher Education of China
文摘Classification of plume and spatter images was studied to evaluate the welding stability. A high-speed camera was used to capture the instantaneous images of plume and spatters during high power disk laser welding. Characteristic parameters such as the area and number of spatters, the average grayscale of a spatter image, the entropy of a spatter grayscale image, the coordinate ratio of the plume centroid and the welding point, the polar coordinates of the plume centroid were defined and extracted. Karhunen-Loeve transform method was used to change the seven characteristics into three primary characteristics to reduce the dimensions. Also, K-nearest neighbor method was used to classify the plume and spatter images into two categories such as good and poor welding quality. The results show that plume and spatter have a close relationship with the welding stability, and two categories could be recognized effectively using K-nearest neighbor method based on Karhunen-Loeve transform.
基金Financially supported by the Special Pro-gramme for Agriculture under Ministry of Chinese Science and Technology (No. 2002BA516A15-01).
文摘Totally 24 arbor tree species and 6 shrub species were measured on their absorption capacities to heavy metal Pb, Cd, Cr, and Hg by collecting and analyzing the leaves of trees along different streets in Harbin city in Sept. to Oct. of 2003. The results showed that all the measured species had certain absorbency to the pollutants (Pb, Cd, Cr and Hg), but there existed significant difference in absorption capacity for different species to different pollutants. The measured tree species were classified into three categories by their absorption quantum of heavy metal pollutants. Among the species measured,Betula platyphylla, Ulmus pumila var.pendula, andPrunus persicaf.rubro-plena had high capacity in absorbing Pb;Populus xiahei, P. nigra var.Italica, P. alba x P. berolinensis andSalix matsudana had had high capacity in absorbing Cd;Phellodendron amurense, Syringa oblata, Salix matsudana, Pinus tabulaeformis var.mukdensis, Picea koraiensis, Prunus persica f.rubro-plena, P. triloba andAcer negundo, etc. had high capacity in absorption of Cr;Prunus triloba, Quercus mongolica, Salix matsudana, Sambucus williamsii, Pyrus ussuuriensis andSpiraea fritschiana were good at absorption of Hg. This study might offer scientific foundation for selection of urban afforestation species in different polluted conditions caused by heavy metals. Keywords Greening tree species - Heavy metal - Pollutants - Plumbum - Cadmium - Chromium - Mercury - Absorptivity CLC number S731.2 - X501 Document code A Foundation item: This study is financially supported by the Special Programme for Agriculture under Ministry of Chinese Science and Technology (No. 2002BA516A15-01).Biography: MU Li-qiang (1966-), female, Associate professor in Northeast Forestry University, Harbin 150040, P. R. China.Responsible editor: Zhu Hong
文摘A self-invented atomization process, in which molten metal is atomized into powder by a high-velocity gas stream carrying solid particles as the atomization medium, was introduced. The characteristics of powders prepared by common gas atomization and dual-phase flow atomization under similar conditions were compared. The experimental results show that the dual-phase flow-atomized powders have average particle sizes that are one-half that of the common gas-atomized particles;additionally, they possess a finer microstructure and higher cooling rate under the same atomization gas pressure and the same gas flow. The Weber number in the crash criteria of liquid atomization is adopted to measure the crash ability of the atomization media. The Weber number of the dual-phase flow atomization medium is the sum of that of the gas and the solid particles. Furthermore, the critical equation of the crash model in dual-phase flow atomization is established, and the main regularities associated with this process were analyzed.
基金Project (09009) supported by the State Key Laboratory of Advanced Welding and Joining,Harbin Institute of Technology,China
文摘Wrought magnesium alloy sheets were butt welded with gas metal arc welding process. Pores in the weld were investigated under different welding parameters, the causes of pore formation were systematically disposed, and the effects of porosity on the microstructure and mechanical properties of the joint were analyzed. The microstructure examination shows that the pores mainly appear close to the top or bottom part of the weld, and could connect to each other and lead to the formation of cracks in the welds. However, the pores can be controlled with proper welding parameters. The tensile testing results reveal that the average joint strength is close to or higher than that of the base metal. The microhardness in the weld can be even higher than that in the base metal due to the second ohase strengthening of β-Mg17（A1, Zn）12 formed in the weld.
基金Project(51275295)supported by the National Natural Science Foundation of ChinaProjects(20120073120011,20130073110052)supported by the Research Fund for the Doctoral Program of Higher Education of China
文摘The semi-solid slurry of AZ91 D magnesium alloy was prepared by gas bubbling process.The effect of processing parameters,including gas flow rate,cooling rate and stirring end temperature,on microstructure of AZ91 D semi-solid slurry was investigated.With increasing the gas flow rate from 0 to 5 L/min,the average size of primary α-Mg particles decreases from 119.1 to77.2μm and the average shape factor increases continuously from 0.1 to 0.596.The formation of non-dendritic primary α-Mg particles during gas bubbling is the result of combined effects of dendrite fragmentation and copious nucleation.With increasing the cooling rate from 3.6 to 14.6℃/min,the average particle size of primary α-Mg phase decreases from 105.0 to 68.1μm while the average shape factor peaks at 9.1℃/min.Both high and low cooling rates can induce dendritic growth of primary α-Mg particles.Changing the stirring end temperature from 590 to 595℃ has little effect on the average size and shape factor of primary α-Mg particles in AZ91 D semi-solid slurry.The insensitivity of semi-solid microstructures to the stirring end temperature is attributed to the sufficient quantity of primary particles formed in the melt.
基金Project(21271188) supported by the Nature Science Foundation of China
文摘Deposition of diamond inside the trenches or microchannels by chemical vapor deposition （CVD） is limited by the diffusion efficiency of important radical species for diamond growth （H, CH3） and the pore depth of the substrate template. By ultrasonic seeding with nanodiamond suspension, three-dimensional （3D） penetration structure diamond was successfully deposited in cylindrical microchannels of Cu template by hot-filament chemical vapor deposition. Micro-Raman spectroscopy and scanning electron microscopy （SEM） were used to characterize diamond film and the effects of microchannel depth on the morphology, grain size and growth rate of diamond film were comprehensively investigated. The results show that diamond quality and growth rate sharply decrease with the increase of the depth of cylindrical microchannel. Individual diamond grain develops gradually from faceted crystals into micrometer cluster, and finally to ballas-type nanocrystalline one. In order to modify the rapid decrease of diamond quality and growth rate, a new hot filament apparatus with a forced gas flow through Cu microchannels was designed. Furthermore, the growth of diamond film by new apparatus was compared with that without a forced gas flow, and the enhancement mechanism was discussed.
基金Project (2012M511993) supported by China Postdoctoral Science FoundationProject (TPL1202) supported by the Open Fund Program of the State Key Laboratory of Traction Power, Southwest Jiaotong University, China
文摘The friction and wear tests were performed using Nitinol 60 alloy pin sliding over GCr15 steel disk in a pin-on-disk tribometer system under PAO oil lubrication conditions. It was found that Nitinol 60 alloy can be lubricated well and has shown remarkable tribological performance. Average coefficient of friction （COF） of Nitinol 60 is 0.6 under dry friction; however, average COF decreases to 0.1 under PAO oil lubrication. SEM image of the worn surface shows that Nitinol 60 exhibits excellent wear resistance and the wear mechanism is mainly adhesive wear. Flow pattern of oil-air flow in oil pipe was simulated by FLUENT software with VOF model for acquiring working performance of oil-air lubrication. The optimum velocity of oil and air at the inlet was achieved, which provides the great proposal for the design of experiment of oil-air lubrication of Nitinol 60 alloy. The simulation results showed that the optimum annular flow of flow pattern was obtained when air velocity is 10 m/s and oil velocity is 0.05 m/s. The formation mechanism of annular flow was also discussed in the present study.
基金Supported by Natural Science Foundation of Guangxi Zhuang Autonomous Region(2011GXNSFF018006)Special Fund for Bagui Scholar Project~~
文摘[Objective] This study aimed to analyze the volatile constituents in Lonicera japonica Thunb. from different origins. [Method] HP-5MS capillary columns were used and column temperature was controlled by a program. MS analysis was performed with EI and quadruple mass analyzer. The volatile constituents in L. japonica Thunb. were identified by NIST02 and Wiley275 libraries, and their relative contents were determined with chromatographic peak area normalization method. [Result] According to GC-MS total ion-current chromatograms, 35 volatile constituents were identified in L. japonica Thunb. from Guangxi Zhuang Autonomous Region, mainly including methyl linolenate, n-hexadecanoic acid and ζ-muurolene; 18 volatile constituents were identified in L. japonica Thunb. from Hunan Province, mainly including n-hexadecanoic acid, linoleic acid and α-curcumene. [Conclusion] Main volatile constituents in L. japonica Thunb. from two different origins varied significantly.
基金Project(2014HA003)supported by the Cultivating Plan Program for the Technological Leading Talents of Yunnan Province,ChinaProject(51474116)supported by the National Natural Science Foundation of China+2 种基金Project(IRT1250)supported by the Program for Innovative Research Team in University of Ministry of Education of ChinaProject(20140355)supported by the Analytical Test Fund of Kunming University of Science and Technology,Chinasupported by the First-class Doctoral Dissertation Breeding Foundation of Kunming University of Science and Technology,China
文摘In order to recycle waste Sn-based alloys, the vapor-liquid phase equilibrium composition diagrams of Sn-Pb, Sn-Sb and Sn-Zn binary systems were calculated. The calculated results indicate that Pb, Sb and Zn can be separated from Sn effectively. Based on the above calculation, the industrial experiments of vacuum distillation of Sn-Pb alloy, Sn-Pb-Sb alloy, Sn-Pb-Sb-As alloy, crude Sn and Sn-Zn alloy with different contents were carried out. The experimental results show that Pb(>99% Pb) and Sn(≤0.003% Pb) were obtained simultaneously while Sn-Pb alloy was subjected to vacuum distillation; the crude Sn(>90% Sn, ≤ 2% Pb, ≤6% Sb) and crude Pb(≤2% Sn) were obtained simultaneously while a single vacuum distillation was carried out for Sn-Pb-Sb alloy; the Pb and Bi contents in the Sn ingot(99.99% Sn) achieve the grade A of GB/T 728—2010 standard, more than 50% of As and Sb was removed after vacuum distillation of crude Sn; Zn(<0.002% Sn) and Sn(about 3% Zn) were obtained while vacuum distillation of Sn-Zn alloy was conducted at 1173 K, 20-30 Pa for 8-10 h.
基金Project(2012ZX04003-031)supported by the National Science and Technology Major Project,China
文摘The characteristics of hot filament chemical vapor deposition（HFCVD） diamond films are significantly influenced by the deposition parameters, such as the substrate temperature, total pressure and carbon concentration. Orthogonal experiments were introduced to study the comprehensive effects of such three parameters on diamond films deposited on WC-Co substrates. Field emission scanning electron microscopy, atomic force microscopy and Raman spectrum were employed to analyze the morphology, growth rate and composition of as-deposited diamond films. The morphology varies from pyramidal to cluster features with temperature decreasing. It is found that the low total pressure is suitable for nano-crystalline diamond films growth. Moreover, the substrate temperature and total pressure have combined influence on the growth rate of the diamond films.
