Solid-state Na metal batteries(SSNBs),known for its low cost,high safety,and high energy density,hold a significant position in the next generation of rechargeable batteries.However,the urgent challenge of poor interf...Solid-state Na metal batteries(SSNBs),known for its low cost,high safety,and high energy density,hold a significant position in the next generation of rechargeable batteries.However,the urgent challenge of poor interfacial contact in solid-state electrolytes has hindered the commercialization of SSNBs.Driven by the concept of intimate electrode-electrolyte interface design,this study employs a combination of NaK alloy and carbon nanotubes to prepare a semi-solid NaK(NKC)anode.Unlike traditional Na anodes,the paintable paste-like NKC anode exhibits superior adhesion and interface compatibility with both current collectors and gel electrolytes,significantly enhancing the intimate contact of electrode-electrolyte interface.Additionally,the filling of SiO_(2)nanoparticles improves the wettability of NaK alloy on gel polymer electrolytes,further achieving a conformal interface contact.Consequently,the overpotential of the NKC symmetric cell is markedly lower than that of the Na symmetric cell when subjected to a long cycle of 300 h.The full cell coupled with Na_(3)V_(3)(PO_(4))_(2)cathodes had an initial discharge capacity of 106.8 mAh·g^(-1)with a capacity retention of 89.61%after 300 cycles,and a high discharge capacity of 88.1 mAh·g^(-1)even at a high rate of 10 C.The outstanding electrochemical performance highlights the promising application potential of the NKC electrode.展开更多
Na0.44MnO2 nanorods have been prepared by a hydrothermal method.The experimental parameters have been systematically investigated and optimized.The results show that Na0.44MnO2 nanorods obtained via the hydrothermal t...Na0.44MnO2 nanorods have been prepared by a hydrothermal method.The experimental parameters have been systematically investigated and optimized.The results show that Na0.44MnO2 nanorods obtained via the hydrothermal treatment at 200℃for 16 h show the best electrochemical properties,which deliver the high initial discharge capacity of 110.7 mA·h/g at 50 mA/g in potential window 2.0-4.0 V.To further improve their electrochemical properties,a ball milling process with graphene has been carried out to obtain Na0.44MnO2/graphene composite.The initial discharge capacity of Na0.44MnO2/graphene composite is 106.9 mA·h/g at a current density of 50 mA/g.After 100 cycles,the residual discharge capacity is 91.8 mA·h/g and the capacity retention rate is 85.9%,which is much higher than that of pristine Na0.44MnO2 nanorods(74.7%)at the same condition.What is more,when the current density reaches 500 and 1000 mA/g,the corresponding discharge capacities of Na0.44MnO2/graphene composite are about 89 and 78 mA·h/g,respectively,indicating outstanding rate capability.展开更多
Sodium-ion batteries are considered as a promising candidate for lithium-ion batteries due to abundant sodium resources and similar intercalation chemistry.Hard carbon derived from biomass with the virtue of abundance...Sodium-ion batteries are considered as a promising candidate for lithium-ion batteries due to abundant sodium resources and similar intercalation chemistry.Hard carbon derived from biomass with the virtue of abundance and renewability is a cost-effective anode material.Herein,hard carbon is derived from renewable bagasse through a simple two-step method combining mechanical ball milling with carbonization.The hard carbon electrodes exhibit superior electrochemical performance with a high reversible capacity of 315 mA∙h/g.Furthermore,the initial capacity of the full cell,HC//NaMn0.4Ni0.4Ti0.1Mg0.1O2,is 253 mA∙h/g and its capacity retention rate is 77%after 80 cycles,which further verifies its practical application.The simple and low-cost preparation process,as well as excellent electrochemical properties,demonstrates that hard carbon derived from bagasse is a promising anode for sodium-ion batteries.展开更多
V2O5/NaV6O15 nanocomposites were synthesized by a facile hydrothermal method using VO2(B)nanoarrays as the precursor.X-ray diffraction,scanning electron microscopy and transmission electron microscopy,and galvanostati...V2O5/NaV6O15 nanocomposites were synthesized by a facile hydrothermal method using VO2(B)nanoarrays as the precursor.X-ray diffraction,scanning electron microscopy and transmission electron microscopy,and galvanostatic charge-discharge test were used to evaluate the structures,morphologies and electrochemical performance of samples,respectively.The results show that the nanocomposites are composed of one-dimensional nanobelts,preserving the morphology of the precursor well,and the hydrothermal reaction time has a significant effect on the phase contents and electrochemical performance of the composites.Compared with pure V2O5,V2O5/NaV6O15 nanocomposites exhibit enhanced electrochemical performance as cathode for sodium-ion batteries.It should be ascribed to the synergistic effect between V2O5 with high capacity and NaV6O15 with good cycling performance,and the introduced massive interfacial areas which can provide additional ion storage sites and improve the electronic and ionic conductivities.展开更多
The conversion reaction-based anode materials of sodium ion batteries have relatively high capacity;however,the application of these materials is limited by their structural collapse due to the poor structure stabilit...The conversion reaction-based anode materials of sodium ion batteries have relatively high capacity;however,the application of these materials is limited by their structural collapse due to the poor structure stability.In this work,MoSe_(2) nanosheets were synthesized by a solvothermal method.An organic solvent was intercalated into the MoSe_(2) materials to enlarge the interlayer spacing and improve the conductivity of the material.The MoSe_(2) material was coated with an organic pyrolysis carbon and then a uniform carbon layer was formed.The surface carbon hybridization of the nanosheet materials was realized by the introduction of heteroatoms during the sintering process.The as-prepared MoSe_(2)@N,P-C composites showed a superior rate performance as it could maintain the integrity of the morphology and structure under a high current density.The composites had a discharge specific capacity of 302.4 mA·h/g after 100 cycles at 0.5 A/g,and the capacity retention rate was 84.96%.展开更多
P2-type Na_(2/3)Fe_(1/2)Mn_(1/2)O_(2) was synthesized by a facile sol−gel method,and the effect of calcination temperature on the structure,morphology and electrochemical performance of samples was investigated.The re...P2-type Na_(2/3)Fe_(1/2)Mn_(1/2)O_(2) was synthesized by a facile sol−gel method,and the effect of calcination temperature on the structure,morphology and electrochemical performance of samples was investigated.The results show that the sample obtained at 900℃ is pure P2-type Na_(2/3)Fe_(1/2)Mn_(1/2)O_(2) phase with good crystallization,which consists of hexagon plate-shaped particles with the size and thickness of 2−4μm and 200−400 nm,respectively.The sample exhibits an initial specific discharge capacity of 243 mA·h/g at a current density of 26 mA/g with good cycling stability.The high specific capacity indicates that P2-type Na_(2/3)Fe_(1/2)Mn_(1/2)O_(2) is a promising cathode material for sodiumion batteries.展开更多
基金National Natural Science Foundation of China(52073253)。
文摘Solid-state Na metal batteries(SSNBs),known for its low cost,high safety,and high energy density,hold a significant position in the next generation of rechargeable batteries.However,the urgent challenge of poor interfacial contact in solid-state electrolytes has hindered the commercialization of SSNBs.Driven by the concept of intimate electrode-electrolyte interface design,this study employs a combination of NaK alloy and carbon nanotubes to prepare a semi-solid NaK(NKC)anode.Unlike traditional Na anodes,the paintable paste-like NKC anode exhibits superior adhesion and interface compatibility with both current collectors and gel electrolytes,significantly enhancing the intimate contact of electrode-electrolyte interface.Additionally,the filling of SiO_(2)nanoparticles improves the wettability of NaK alloy on gel polymer electrolytes,further achieving a conformal interface contact.Consequently,the overpotential of the NKC symmetric cell is markedly lower than that of the Na symmetric cell when subjected to a long cycle of 300 h.The full cell coupled with Na_(3)V_(3)(PO_(4))_(2)cathodes had an initial discharge capacity of 106.8 mAh·g^(-1)with a capacity retention of 89.61%after 300 cycles,and a high discharge capacity of 88.1 mAh·g^(-1)even at a high rate of 10 C.The outstanding electrochemical performance highlights the promising application potential of the NKC electrode.
基金Project(51672234)supported by the National Natural Science Foundation of ChinaProject(1337304)supported by the Program for Innovative Research Cultivation Team in University,Ministry of Education,China
文摘Na0.44MnO2 nanorods have been prepared by a hydrothermal method.The experimental parameters have been systematically investigated and optimized.The results show that Na0.44MnO2 nanorods obtained via the hydrothermal treatment at 200℃for 16 h show the best electrochemical properties,which deliver the high initial discharge capacity of 110.7 mA·h/g at 50 mA/g in potential window 2.0-4.0 V.To further improve their electrochemical properties,a ball milling process with graphene has been carried out to obtain Na0.44MnO2/graphene composite.The initial discharge capacity of Na0.44MnO2/graphene composite is 106.9 mA·h/g at a current density of 50 mA/g.After 100 cycles,the residual discharge capacity is 91.8 mA·h/g and the capacity retention rate is 85.9%,which is much higher than that of pristine Na0.44MnO2 nanorods(74.7%)at the same condition.What is more,when the current density reaches 500 and 1000 mA/g,the corresponding discharge capacities of Na0.44MnO2/graphene composite are about 89 and 78 mA·h/g,respectively,indicating outstanding rate capability.
基金Projects(51661009,51761007)supported by the National Natural Science Foundation of China,Projects(2019GXNSFDA245014,2016GXNSFGA380001)supported by the Natural Science Foundation of Guangxi Province,China,Projects(2019AC20164,2019AC20053)supported by the Science and Technology Base and Talent Special Project of Guangxi Province,China。
文摘Sodium-ion batteries are considered as a promising candidate for lithium-ion batteries due to abundant sodium resources and similar intercalation chemistry.Hard carbon derived from biomass with the virtue of abundance and renewability is a cost-effective anode material.Herein,hard carbon is derived from renewable bagasse through a simple two-step method combining mechanical ball milling with carbonization.The hard carbon electrodes exhibit superior electrochemical performance with a high reversible capacity of 315 mA∙h/g.Furthermore,the initial capacity of the full cell,HC//NaMn0.4Ni0.4Ti0.1Mg0.1O2,is 253 mA∙h/g and its capacity retention rate is 77%after 80 cycles,which further verifies its practical application.The simple and low-cost preparation process,as well as excellent electrochemical properties,demonstrates that hard carbon derived from bagasse is a promising anode for sodium-ion batteries.
基金Project(2020JJ5102)supported by the Natural Science Foundation of Hunan Province,ChinaProject(19A111)supported by the Scientific Research Fund of Hunan Provincial Education Department,China。
文摘V2O5/NaV6O15 nanocomposites were synthesized by a facile hydrothermal method using VO2(B)nanoarrays as the precursor.X-ray diffraction,scanning electron microscopy and transmission electron microscopy,and galvanostatic charge-discharge test were used to evaluate the structures,morphologies and electrochemical performance of samples,respectively.The results show that the nanocomposites are composed of one-dimensional nanobelts,preserving the morphology of the precursor well,and the hydrothermal reaction time has a significant effect on the phase contents and electrochemical performance of the composites.Compared with pure V2O5,V2O5/NaV6O15 nanocomposites exhibit enhanced electrochemical performance as cathode for sodium-ion batteries.It should be ascribed to the synergistic effect between V2O5 with high capacity and NaV6O15 with good cycling performance,and the introduced massive interfacial areas which can provide additional ion storage sites and improve the electronic and ionic conductivities.
基金Project(51572300) supported by the National Natural Science Foundation of China。
文摘The conversion reaction-based anode materials of sodium ion batteries have relatively high capacity;however,the application of these materials is limited by their structural collapse due to the poor structure stability.In this work,MoSe_(2) nanosheets were synthesized by a solvothermal method.An organic solvent was intercalated into the MoSe_(2) materials to enlarge the interlayer spacing and improve the conductivity of the material.The MoSe_(2) material was coated with an organic pyrolysis carbon and then a uniform carbon layer was formed.The surface carbon hybridization of the nanosheet materials was realized by the introduction of heteroatoms during the sintering process.The as-prepared MoSe_(2)@N,P-C composites showed a superior rate performance as it could maintain the integrity of the morphology and structure under a high current density.The composites had a discharge specific capacity of 302.4 mA·h/g after 100 cycles at 0.5 A/g,and the capacity retention rate was 84.96%.
基金the financial supports from the Natural Science Foundation of Hunan Province,China(No.2020JJ5102)the Scientific Research Fund of Hunan Provincial Education Department,China(No.19A111).
文摘P2-type Na_(2/3)Fe_(1/2)Mn_(1/2)O_(2) was synthesized by a facile sol−gel method,and the effect of calcination temperature on the structure,morphology and electrochemical performance of samples was investigated.The results show that the sample obtained at 900℃ is pure P2-type Na_(2/3)Fe_(1/2)Mn_(1/2)O_(2) phase with good crystallization,which consists of hexagon plate-shaped particles with the size and thickness of 2−4μm and 200−400 nm,respectively.The sample exhibits an initial specific discharge capacity of 243 mA·h/g at a current density of 26 mA/g with good cycling stability.The high specific capacity indicates that P2-type Na_(2/3)Fe_(1/2)Mn_(1/2)O_(2) is a promising cathode material for sodiumion batteries.
