期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
An investigation on anti-impact and penetration performance of basalt fiber composites with different weave and lay-up modes 被引量:1
1
作者 Hai-dong Fu Xin-ya Feng +3 位作者 Jin-xu Liu Zhi-ming Yang Chuan He Shu-kui Li 《Defence Technology(防务技术)》 SCIE EI CAS CSCD 2020年第4期787-801,共15页
The woven basalt fiber composites(WBFC) and the unidirectional [0°/90°/45°/-45°]s basalt fiber composites(UBFC) were prepared by hot-pressing.Three-point bending test,low velocity impact test,and b... The woven basalt fiber composites(WBFC) and the unidirectional [0°/90°/45°/-45°]s basalt fiber composites(UBFC) were prepared by hot-pressing.Three-point bending test,low velocity impact test,and ballistic test were performed to the prepared composites.After the tests,the specimens were recovered and analyzed for micromorphology.Three-point bending tests show that both the bending strength and stiffness of the WBFC surpass those of the UBFC.Low velocity impact test results show that the low velocity impact resistance to hemispherical impactor of the UBFC is higher than that of the WBFC,but the low velocity impact resistance to sharp impactor of the UBFC is lower than that of the WBFC.For the ballistic test,it can be found that the ballistic property of the UBFC is higher than that of the WBFC. After the tests,microscopic analysis of the specimens was applied,and their failure mechanism was discussed.The main failure modes of the UBFC are delamination and fibers breakage under the above loading conditions while the main failure mode of the WBFC is fibers breakage.Although delamination damage can be found in the WBFC under the above loading conditions,the degree of delamination is far less than that of the UBFC. 展开更多
关键词 The woven basalt fiber composites The[/90°/45°/-45°]_s basalt fiber COMPOSITES Low velocity impact Ballistic test DELAMINATION
下载PDF
快速铺层:新的三维预成型技术
2
作者 苏平永 《中国新技术新产品》 2016年第7期19-20,共2页
钩-环锁扣加速了碳纤维、芳纶纤维、玻璃纤维和混杂织物的铺层,同时提高了复合材料的力学性能,这项技术是目前国际上最新复合材料三维织物生产并实现快速铺层最先进的工艺技术,用此种工艺生产的零件,不但可以提高复合材料零件各方面的强... 钩-环锁扣加速了碳纤维、芳纶纤维、玻璃纤维和混杂织物的铺层,同时提高了复合材料的力学性能,这项技术是目前国际上最新复合材料三维织物生产并实现快速铺层最先进的工艺技术,用此种工艺生产的零件,不但可以提高复合材料零件各方面的强度,更主要的是可以降低直接与间接生产成本。 展开更多
关键词 3D预成型 “Han-3D”织物或“Han-3D”复合材料 -环锁 树脂传递模塑成型工艺(RTM) 顺序(0°、+45°、-45°、90°、0°、-45°、+45°、) 互锁型 非互锁型
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部