The tangentially fired utility boiler furnace is divided into several sections. The dynamic mathematical models for each section are presented. In the combustion zone, three dimensional model is used, while for the up...The tangentially fired utility boiler furnace is divided into several sections. The dynamic mathematical models for each section are presented. In the combustion zone, three dimensional model is used, while for the upper sections, lumped parameter model is used instead. With the combination of different models, we can get detailed distributions of gas velocity, temperature, chemical species, heat flux, etc. in the furnace, but with less CPU time. The radiation through the interfaces of each section is cons...展开更多
An improved mathematical model for a circulating fluidized bed (CFB) boiler based on the model developed earlier by the authors was applied to simulate the operation of a 12 MW CFB boiler. The influences of the excess...An improved mathematical model for a circulating fluidized bed (CFB) boiler based on the model developed earlier by the authors was applied to simulate the operation of a 12 MW CFB boiler. The influences of the excess air ratio, primary air ratio, coal particle size distribution, coal properties (ash content and volatile content) and Ca/S ratio on the boiler operation were analyzed. The results showed that the model simulation may be applied to the optimum design and economic operation of the CFB boiler.展开更多
In this paper,the designed features of a W-flame coal-fired boiler are introduced.A scheme of joint primary air for two boilers is made and technical measures are also taken based on corresponding analyses and studies...In this paper,the designed features of a W-flame coal-fired boiler are introduced.A scheme of joint primary air for two boilers is made and technical measures are also taken based on corresponding analyses and studies.The scheme and the measures provide a reference for technicians to improve the efficiencies and reduce the startup costs of other similar large boilers.展开更多
When designing and selecting burning equipment for low volatile coal fired boilers,the primary concerns are about coal ignition and burnout.The characteristics of ignition and burnout are analyzed for low volatile coa...When designing and selecting burning equipment for low volatile coal fired boilers,the primary concerns are about coal ignition and burnout.The characteristics of ignition and burnout are analyzed for low volatile coal and the technical measures are discussed for enhancing the combustion and burnout.The adaptability of tangential firing,wall firing and double-arch firing for low volatile coal is studied.Based on the statistic analysis for the main design parameters of domestic low volatile coal fired boilers with tangential firing,wall firing or double-arch W flame firing,the thermal performance for various boiler furnaces is recommended.The combustion systems for different types of boilers are also put forward for coals with different volatiles.展开更多
文摘The tangentially fired utility boiler furnace is divided into several sections. The dynamic mathematical models for each section are presented. In the combustion zone, three dimensional model is used, while for the upper sections, lumped parameter model is used instead. With the combination of different models, we can get detailed distributions of gas velocity, temperature, chemical species, heat flux, etc. in the furnace, but with less CPU time. The radiation through the interfaces of each section is cons...
文摘An improved mathematical model for a circulating fluidized bed (CFB) boiler based on the model developed earlier by the authors was applied to simulate the operation of a 12 MW CFB boiler. The influences of the excess air ratio, primary air ratio, coal particle size distribution, coal properties (ash content and volatile content) and Ca/S ratio on the boiler operation were analyzed. The results showed that the model simulation may be applied to the optimum design and economic operation of the CFB boiler.
文摘In this paper,the designed features of a W-flame coal-fired boiler are introduced.A scheme of joint primary air for two boilers is made and technical measures are also taken based on corresponding analyses and studies.The scheme and the measures provide a reference for technicians to improve the efficiencies and reduce the startup costs of other similar large boilers.
文摘When designing and selecting burning equipment for low volatile coal fired boilers,the primary concerns are about coal ignition and burnout.The characteristics of ignition and burnout are analyzed for low volatile coal and the technical measures are discussed for enhancing the combustion and burnout.The adaptability of tangential firing,wall firing and double-arch firing for low volatile coal is studied.Based on the statistic analysis for the main design parameters of domestic low volatile coal fired boilers with tangential firing,wall firing or double-arch W flame firing,the thermal performance for various boiler furnaces is recommended.The combustion systems for different types of boilers are also put forward for coals with different volatiles.
