A major natural hazard associated with LGOM （Legnica-Glogow Copper Mining） mining is the dynamic phenomena occurrence, physically observed as seismic tremors. Some of them generate effects in the form of relaxations...A major natural hazard associated with LGOM （Legnica-Glogow Copper Mining） mining is the dynamic phenomena occurrence, physically observed as seismic tremors. Some of them generate effects in the form of relaxations or bumps. Long-term observations of the rock mass behaviour indicate that the degree of seismic hazard, and therefore also seismic activity in the LGOM area, is affected by the great depth of the copper deposit, high-strength rocks as well as the ability of rock mass to accumulate elastic energy. In this aspect, the effect of the characteristics of initial stress tensor and the orientation of considered mining panel in regards to its components must be emphasised. The primary objective of this study is to answer the question, which of the factors considered as ＂influencing＂ the dynamic phenomena occurrence in copper mines have a statistically significant effect on seismic activity and to what extent. Using the general linear model procedure, an attempt has been made to quantify the impact of different parameters, including the depth of deposit, the presence of goaf in the vicinity of operating mining panels and the direction of mining face advance, on seismic activity based on historical data from 2000 to 2010 concerned with the dynamic phenomena recorded in different mining panels in Rudna mine. The direction of mining face advance as well as the goaf situation in the vicinity of the mining panel are of the greatest interest in the case of the seismic activity in LGOM. It can be assumed that the appropriate manipulation of parameters of mining systems should ensure the safest variant of mining method under specific geological and mining conditions.展开更多
The Lajishan Mountain fault zone consists of two NE_protruding arcuate faults, i.e. the northern and southern margin fault of Lajishan Mountain with the fault length of 230km and 220km respectively. The fault zone is ...The Lajishan Mountain fault zone consists of two NE_protruding arcuate faults, i.e. the northern and southern margin fault of Lajishan Mountain with the fault length of 230km and 220km respectively. The fault zone is located in the large_scale compressional structure zone and tectonic gradient zone in_between the NNW_trending right_lateral strike_slip Reshui_Riyueshan fault zone and the NWW_trending left_lateral strike_slip northern margin of west Qinling Ranges fault zone is also an important boundary fault zone, separating the Xining_Minhe basin and the Xunhua_Hualong basin at the southern and northern sides of the Lajishan Mountain respectively. Geologic geomorphic evidences of new activity revealed by field investigations indicate that the latest movement of the Lajishan fault zone was in late Epipleistocene (only a few segments were active in early Holocene) and is mainly of compressive thrusting with slightly left_lateral strike_slip component. The above movement has possibly resulted in the occurrence of about 20 moderate earthquakes of magnitude around 5.0. The Lajishan region can therefore be regarded as a seismotectonic window to reflect tectonic movement and earthquake activity.展开更多
A large number of debris flows occurred in the Wenchuan earthquake zone after the 12 May 2008 earthquake.The risks posed by these debris flows were rather high.An appropriate model is required to predict the possible ...A large number of debris flows occurred in the Wenchuan earthquake zone after the 12 May 2008 earthquake.The risks posed by these debris flows were rather high.An appropriate model is required to predict the possible runout distance and impacted area.This paper describes a study on the runout characteristics of the debris flows that occurred in the Wenchuan earthquake zone over the past four years.A total of 120 debris flows are analyzed.Separate multivariate regression models are established for the runout distances of hill-slope debris flows and channelized debris flows.The control variables include type of debris flow,debris flow volume,and elevation difference.Comparison of the debris flows occurring before and after the earthquake shows that the runout distance increased after the earthquake due to sufficient material supply and increased mobility of the source materials.In addition,the runout distances of annual debris flow events in 2008,2010 and 2011 are analyzed and compared.There is a tendency that the runout distance decreases over time due to the decreasing source material volume and possible changes of debris flow type.Comparison between the debris flows in the earthquake zone and the debris flows in Swiss Alps,Canada,Austria,and Japan shows that the former have a smaller mobility.展开更多
Yunnan is located in the east margin of the collision zone between the India Plate and the Eurasian Plate on the Chinese Continent, where crustal movement is violent and moderatestrong earthquakes are frequent. In add...Yunnan is located in the east margin of the collision zone between the India Plate and the Eurasian Plate on the Chinese Continent, where crustal movement is violent and moderatestrong earthquakes are frequent. In addition, the area features marked active block movement. Therefore, Yunnan is a perfect place for research on strong earthquake activity. Through the study on the temporal and spatial distribution of the M ≥ 6.7 earthquakes and the related earthquake dynamics in Yunnan in the last century, we conclude that the four seismically active periods, which are characterized by alternative activity in the east and the west part of Yunnan, possibly result from a combination of active and quiescent periods in each of the east and west part. And for every 100 years, there may be a period in which strong earthquakes occur in the east and west parts simultaneously. In addition, the seismicity of strong earthquakes in Yunnan corresponds well to that in the peripheral region. The seismicity of the great earthquakes in the Andaman-Myanmar Tectonic Arc belt indicates, to some extent, the beginning of a seismically active period in Yunnan. The seismicity of strong earthquakes in east Yunnan is closely related to that in Sichuan. Strong earthquakes in Sichuan often occur later than those in Yunnan. Furthermore, in the east part of Ynnnan, the three procedures including continuous occurrence of moderate-strong earthquake, quiescent period, and the occurrence of the first strong earthquake may be the style of the beginning of the earthquake active period. The above cognition is helpful to the study of earthquake prediction, seismogenic mechanism, and the dynamics of the plate margin in Yunnan.展开更多
For the purpose of having a better understanding of failure mechanisms of rock fracturing in mines, the equivalent point source models of tensile, shear and explosive seismic events were established, and the relations...For the purpose of having a better understanding of failure mechanisms of rock fracturing in mines, the equivalent point source models of tensile, shear and explosive seismic events were established, and the relationship between far-field seismic displacements of the waves and the corresponding equivalent forces were analyzed as well. Based on the results of a microseismic monitoring carried out in the mining progress of 9202 working face under the upper remnant coal pillar in Sanhejian Mine, the waveform features of the seismic events associated with different failure modes were further analyzed. The results show that the signals corresponding to different failure mechanisms have different radiation patterns of the seismic displacements, and different characteristics in waveform features, such as dominant frequency, energy released, the ratio of S- to P-wave energy, and so on. In addition, the rock burst happened in the high stress zone is mainly the result of the strong shear fracturing in the mining process. The results of this study have significantly improved the understanding of the characteristics of the failures associated with underground mining, and will greatly benefit the prevention and control of rock burst hazards in burst-prone mines.展开更多
On April 14,2010,an earthquake reaching Richter scale 7.1 struck Jiegu Town of Yushu,a mountain rescue operation promptly launched. All injurers had a direct assess to take medical care,and were immediately rescued an...On April 14,2010,an earthquake reaching Richter scale 7.1 struck Jiegu Town of Yushu,a mountain rescue operation promptly launched. All injurers had a direct assess to take medical care,and were immediately rescued and rapidly evacuated by air to Xining and Golmud at lower altitudes and admitted to advanced hospitals. Almost all of the injurers have been completely recovered. Yushu Earthquake was one of the highest earthquakes in the world,with a high incidence of acute altitude illness,which was observed in about 80 % of the lowland rescuers at an altitude of 4 000 m."Rescue the rescuers"became the major task of Qinghai-Tibetan rescue teams,all the severe patients were rapidly descended to Xining and treated promptly and effectively. The outcome was excellent,all patients survived. After the earthquake,it is a long and arduous task to reconstruct what has been destroyed. Medical teams continue to work in the Yushu Earthquake area because about 30 000 workers and carders are now here for rebuilding the earthquake center. Thus the prevention and treatment of altitude illness are still critical tasks for medical teams. Although all the fights are successful,there are more experiences and lessons we have learned from the medical mountain rescue during the earthquake and the reconstruction,and reports here are to sum up our experiences from the medical mountain rescue operation in Yushu Earthquake and draw the lessons that we should learn. With the increasing of earthquake probability occurring in the Qinghai-Tibetan Plateau,we also should prepare against earthquake disasters and for further rescue training in the high mountains.展开更多
Based on historical earthquake data, we use statistical methods to study integrated recurrence behaviors of strong earthquakes along 7 selected active fault zones in the Sichuan-Yunnan region. The results show that re...Based on historical earthquake data, we use statistical methods to study integrated recurrence behaviors of strong earthquakes along 7 selected active fault zones in the Sichuan-Yunnan region. The results show that recurrences of strong earthquakes in the 7 fault zones display near-random, random and clustering behaviors. The recurrence processes are never quasi-periodic, and are neither strength-time nor time-strength dependent. The more independent segments for strong earthquake rupturing a fault zone has, the more complicated the corresponding recurrence process is. And relatively active periods and quiescent periods for earthquake activity occur alternatively. Within the active periods, the distribution of recurrence time intervals between earthquakes has relatively large discretion, and can be modelled well by a Weibull distribution. The time distribution of the quiescent periods has relatively small discretion, and can be approximately described by some distributions as the normal. Both the durations of the active periods and the numbers of strong earthquakes within the active periods vary obviously cycle by cycle, leading to the relatively active periods having never repeated quasi-periodically. Therefore, the probabilistic assessment for middle- and long-term seismic hazard for entireties of active fault zones based on data of historical strong earthquakes on the fault zones still faces difficulty.展开更多
In this paper,we introduce the tectonic setting,historical earthquake focal mechanisms and geodynamic environment of Tienshan and its neighboring regions, and draw a conclusion that large earthquakes in the Tienshan s...In this paper,we introduce the tectonic setting,historical earthquake focal mechanisms and geodynamic environment of Tienshan and its neighboring regions, and draw a conclusion that large earthquakes in the Tienshan seismic zone are governed mainly by the pushing from Hindu Kush-Pamir syntax. Secondly,the relationship of large earthquakes in the Hindu Kush-Pamir region and the Tienshan seismic zone is investigated,and synchronization features are found existing in the grouped large earthquakes between the large earthquakes in two regions. The relationship between intermediate-focus large earthquakes in Hindu Kush-Pamir and shallow large earthquakes in the Tienshan seismic zone is also discussed. The same synchronization characteristics are found,and the intensity and frequency of intermediate-focus earthquakes are fiercer, while large earthquakes in the Tienshan seismic zone are more intense,with a wider distribution range. The above results confirm the geodynamic correlativity between Hindu Kush-Pamir and the Tienshan seismic zone from the viewpoint of seismicity.展开更多
The results inferred from experiments with analogue models carried out previously have shown that two types of plastic-flow waves, “fast-waves" and “slow-waves", are induced in the lower lithosphere (inclu...The results inferred from experiments with analogue models carried out previously have shown that two types of plastic-flow waves, “fast-waves" and “slow-waves", are induced in the lower lithosphere (including the lower crust and lithospheric mantle) under driving at plate boundaries and both of them are viscous gravity waves formed by the superposition of major and subsidiary waves. The major waves are similar to solitary waves and the subsidiary waves are traveling waves. The plastic-flow waves in the lower lithosphere control seismic activities in the overlying seismogenic layer and result in the distribution of earthquakes along the wave-crest belts. “Fast-waves" propagated with velocities of orders of magnitude of 100～102km/a have been verified by wave-controlled earthquake migration, showing the “decade waves" and “century waves" with the average periods of 10.8 and 93.4 a, respectively, which originate from the Himalayan driving boundary. According to the recognition of the patterns of the belt-like distribution of strong earthquakes with M S≥7.0, it is indicated further in this paper that the “slow-waves" with velocities of orders of magnitude of 100～101 m/a also originated under compression from the Himalayan driving boundary. Strong earthquakes with M S≥7.0 are controlled mainly by subsidiary waves, because the major waves with a duration of up to 106 a for each disturbance cannot result in the accumulation of enough energy for strong earthquakes due to the relaxation of the upper crust. The subsidiary waves propagate with an average wave length of 445 km, velocities of 0.81～2.80 m/a and periods of 0.16～0.55 Ma. The wave-generating time at the Himalayan driving boundary is about 1.34～4.59 Ma before present for the “slow-waves", corresponding to the stage from the Mid Pliocene to the Mid Early-Pleistocene and being identical with one of the major tectonic episodes of the Himalayan tectonic movement. It is shown from the recognition of the wave-controlled belts of strong earthquakes that two optimal patterns of wave-crest belts originated simultaneously from the eastern and western segments of the Himalayan arc, respectively. The overlap of wave-crest belts of these two systems is responsible for the relative concentration of energy and forms the seismic-energy-background zones for strong earthquakes with M S≥7.0.展开更多
The tendency and dynamic characteristics of horizontal movement along the Shanxi fault zone have been analyzed using the data obtained from 6 repeated measurements (1996～2001) in the GPS monitoring network arranged a...The tendency and dynamic characteristics of horizontal movement along the Shanxi fault zone have been analyzed using the data obtained from 6 repeated measurements (1996～2001) in the GPS monitoring network arranged along the Shanxi fault zone. The results indicate: (1) the tendentious activity of the present stage is characterized by a W trending movement along the northern segment of the zone, an E trending movement along the southern segment and counter clockwise differential activity on the whole, but the intensity of the tendentious activity is not high. The tendentious differential movement is only about 3 mm/a in the direction perpendicular to the fault zone from the south to the north, and its stretch in the SN direction is only 1 mm/a and mainly occurs along the north segment of the fault; (2) The azimuth of the principal compressive stress field reflected by the tendentious movement is 72°; (3) The property of annual activity is not the same, even contrary to one another or deviates from the tendentious activity. Therefore, the parameters of the strain field derived from them dont reflect the physical characteristics of the basic stress field. (4) The high frequency movement (yearly) does not only exist but is also complicated by an intensity several times higher than that of the tendentious movement; (5) Obvious differential movements, including strike slip, can not be seen in either in secular activity or annual activity on both sides of any fault. The tendentious movement not only verifies the conjecture of “strong in the south and weak in north”, which is the basic feature forcing the western boundary of the North China area, but it also extends to the hinterland of North China. The fact that there is no obvious differential activity on both sides of the fault might indicate that the differential activity among the intraplate blocks is completed by gradual variation in a certain space, rather than the abrupt change bordered by a fault or narrow stripe zone. The obvious dynamic activity might indicate: (1) there is stress disturbance in the basic stress field; (2) the inhomogeneous or non synchronous variation that appeared in the regional stress and strain fields was due to the different physical property of the medium; (3)the response occurred because of a variety of external variations. The movement in 2001 shows that the Daixian county and its adjacent area might be the boundary segment for the relative differential activity. More attention should be paid here.展开更多
This paper introduces the geological structure background around the 2014 Yutian Ms7. 3 earthquake area, investigates and analyzes the regime of small earthquake activity and the characteristics of regional seismicity...This paper introduces the geological structure background around the 2014 Yutian Ms7. 3 earthquake area, investigates and analyzes the regime of small earthquake activity and the characteristics of regional seismicity pattern in Xinjiang before the earthquake, and compares the characteristics of the regional seismic activity with the 2008 Yutian Ms7.3 earthquake. The results show： ① 2 ~ 3 years before the 2014 Yutian Ms7. 3 earthquake, Xinjiang was in a seismic active state with strong earthquake occurring successively, and before the 2008 Ms 7. 3 earthquake, Xinjiang was in the quiet state of moderate-small earthquakes with M3. 0 ~ 4. 0. ② Before this Yutian Ms7. 3 earthquake, the regional seismic activity showed a short-term anomaly feature, that is, seismicity of M ≥ 5. 0 earthquakes significantly increased on the Altun seismic zone and in the source area three years before the Ms7.3 earthquake, while a five year long quiescence of seismicity of M ≥4. 0 earthquakes appeared on the east of the source area in a range of about 440kin. Six months before this M7. 3 earthquake, there existed seismic gap of M3. 0 ~ 4. 0 earthquakes and near-conjugate seismic belt magnitude 3. 0 and 4. 0 in the source area. ③ The state of strong earthquake activity and the seismicity pattern of small earthquakes before this Yutian Ms7. 3 earthquake were significantly different to that before the 2008 Yutian Ms7. 3 earthquake, and this may be related to the different seismogenic environments of the two Ms7. 3 earthquakes.展开更多
An earthquake with magnitude of 5.7 took place on Aug. 18, 2003 in the Nyingchi Region, Tibet. The macroseismic epicenter was located in the unpopniated high mountain area, 13 km south of Zhamo town, Bond County. The ...An earthquake with magnitude of 5.7 took place on Aug. 18, 2003 in the Nyingchi Region, Tibet. The macroseismic epicenter was located in the unpopniated high mountain area, 13 km south of Zhamo town, Bond County. The seismic intensity in the meizoseismal region was Ⅶ degree. The Ⅶ and Ⅵ areas were 2000 km^2 and 11000 km^2 , respectively. This seismic event is related to the movements of the Lhari fault trending in the NW direction and the ZhamoManiweng fault trending in the NE direction. As a result of this earthquakes, the buildings in the areas were badly damaged.展开更多
The Changjiang fault zone,also known as the Mufushan-Jiaoshan fault,is a famous fault located at the southern bank of the Changjiang River,near the Nanjing downtown area.Based on multidisciplinary data from shallow ar...The Changjiang fault zone,also known as the Mufushan-Jiaoshan fault,is a famous fault located at the southern bank of the Changjiang River,near the Nanjing downtown area.Based on multidisciplinary data from shallow artificial seismic explorations in the target detecting area(Nanjing city and the nearby areas),trenching and drilling explorations,classification of Quaternary strata and chronology dating data,this paper provides the most up-to-date results regarding activities of the Changjiang fault zone,including the most recent active time,activity nature,related active parameters,and their relation to seismic activity.展开更多
文摘A major natural hazard associated with LGOM （Legnica-Glogow Copper Mining） mining is the dynamic phenomena occurrence, physically observed as seismic tremors. Some of them generate effects in the form of relaxations or bumps. Long-term observations of the rock mass behaviour indicate that the degree of seismic hazard, and therefore also seismic activity in the LGOM area, is affected by the great depth of the copper deposit, high-strength rocks as well as the ability of rock mass to accumulate elastic energy. In this aspect, the effect of the characteristics of initial stress tensor and the orientation of considered mining panel in regards to its components must be emphasised. The primary objective of this study is to answer the question, which of the factors considered as ＂influencing＂ the dynamic phenomena occurrence in copper mines have a statistically significant effect on seismic activity and to what extent. Using the general linear model procedure, an attempt has been made to quantify the impact of different parameters, including the depth of deposit, the presence of goaf in the vicinity of operating mining panels and the direction of mining face advance, on seismic activity based on historical data from 2000 to 2010 concerned with the dynamic phenomena recorded in different mining panels in Rudna mine. The direction of mining face advance as well as the goaf situation in the vicinity of the mining panel are of the greatest interest in the case of the seismic activity in LGOM. It can be assumed that the appropriate manipulation of parameters of mining systems should ensure the safest variant of mining method under specific geological and mining conditions.
文摘The Lajishan Mountain fault zone consists of two NE_protruding arcuate faults, i.e. the northern and southern margin fault of Lajishan Mountain with the fault length of 230km and 220km respectively. The fault zone is located in the large_scale compressional structure zone and tectonic gradient zone in_between the NNW_trending right_lateral strike_slip Reshui_Riyueshan fault zone and the NWW_trending left_lateral strike_slip northern margin of west Qinling Ranges fault zone is also an important boundary fault zone, separating the Xining_Minhe basin and the Xunhua_Hualong basin at the southern and northern sides of the Lajishan Mountain respectively. Geologic geomorphic evidences of new activity revealed by field investigations indicate that the latest movement of the Lajishan fault zone was in late Epipleistocene (only a few segments were active in early Holocene) and is mainly of compressive thrusting with slightly left_lateral strike_slip component. The above movement has possibly resulted in the occurrence of about 20 moderate earthquakes of magnitude around 5.0. The Lajishan region can therefore be regarded as a seismotectonic window to reflect tectonic movement and earthquake activity.
基金the support from Sichuan Provincial Department of Transportation and Communicationsthe National Basic Research Program of China (Grant No.2011CB013506)the Research Grants Council of the Hong Kong SAR (Grant No.622210)
文摘A large number of debris flows occurred in the Wenchuan earthquake zone after the 12 May 2008 earthquake.The risks posed by these debris flows were rather high.An appropriate model is required to predict the possible runout distance and impacted area.This paper describes a study on the runout characteristics of the debris flows that occurred in the Wenchuan earthquake zone over the past four years.A total of 120 debris flows are analyzed.Separate multivariate regression models are established for the runout distances of hill-slope debris flows and channelized debris flows.The control variables include type of debris flow,debris flow volume,and elevation difference.Comparison of the debris flows occurring before and after the earthquake shows that the runout distance increased after the earthquake due to sufficient material supply and increased mobility of the source materials.In addition,the runout distances of annual debris flow events in 2008,2010 and 2011 are analyzed and compared.There is a tendency that the runout distance decreases over time due to the decreasing source material volume and possible changes of debris flow type.Comparison between the debris flows in the earthquake zone and the debris flows in Swiss Alps,Canada,Austria,and Japan shows that the former have a smaller mobility.
基金This project was supported bythefundamental researchfunds ofYunnan Province
文摘Yunnan is located in the east margin of the collision zone between the India Plate and the Eurasian Plate on the Chinese Continent, where crustal movement is violent and moderatestrong earthquakes are frequent. In addition, the area features marked active block movement. Therefore, Yunnan is a perfect place for research on strong earthquake activity. Through the study on the temporal and spatial distribution of the M ≥ 6.7 earthquakes and the related earthquake dynamics in Yunnan in the last century, we conclude that the four seismically active periods, which are characterized by alternative activity in the east and the west part of Yunnan, possibly result from a combination of active and quiescent periods in each of the east and west part. And for every 100 years, there may be a period in which strong earthquakes occur in the east and west parts simultaneously. In addition, the seismicity of strong earthquakes in Yunnan corresponds well to that in the peripheral region. The seismicity of the great earthquakes in the Andaman-Myanmar Tectonic Arc belt indicates, to some extent, the beginning of a seismically active period in Yunnan. The seismicity of strong earthquakes in east Yunnan is closely related to that in Sichuan. Strong earthquakes in Sichuan often occur later than those in Yunnan. Furthermore, in the east part of Ynnnan, the three procedures including continuous occurrence of moderate-strong earthquake, quiescent period, and the occurrence of the first strong earthquake may be the style of the beginning of the earthquake active period. The above cognition is helpful to the study of earthquake prediction, seismogenic mechanism, and the dynamics of the plate margin in Yunnan.
基金Projects 50474068 supported by the National Natural Science Foundation of China2005CB221504 by the National Basic Research Program of China+2 种基金2006BAK04B02 and 2006BAK04B06 by the National Eleventh Five-Year Key Science & Technology Project[2007]3020 by the State Scholarship Fund of China Scholarship Councilprovided by the National Basic Research Program of China (2005CB221501)
文摘For the purpose of having a better understanding of failure mechanisms of rock fracturing in mines, the equivalent point source models of tensile, shear and explosive seismic events were established, and the relationship between far-field seismic displacements of the waves and the corresponding equivalent forces were analyzed as well. Based on the results of a microseismic monitoring carried out in the mining progress of 9202 working face under the upper remnant coal pillar in Sanhejian Mine, the waveform features of the seismic events associated with different failure modes were further analyzed. The results show that the signals corresponding to different failure mechanisms have different radiation patterns of the seismic displacements, and different characteristics in waveform features, such as dominant frequency, energy released, the ratio of S- to P-wave energy, and so on. In addition, the rock burst happened in the high stress zone is mainly the result of the strong shear fracturing in the mining process. The results of this study have significantly improved the understanding of the characteristics of the failures associated with underground mining, and will greatly benefit the prevention and control of rock burst hazards in burst-prone mines.
基金"973"National Key Basic Research and Development Program(No.2012CB518202)Project of Qinghai Development of Science and Technology(No.2011-N-150)
文摘On April 14,2010,an earthquake reaching Richter scale 7.1 struck Jiegu Town of Yushu,a mountain rescue operation promptly launched. All injurers had a direct assess to take medical care,and were immediately rescued and rapidly evacuated by air to Xining and Golmud at lower altitudes and admitted to advanced hospitals. Almost all of the injurers have been completely recovered. Yushu Earthquake was one of the highest earthquakes in the world,with a high incidence of acute altitude illness,which was observed in about 80 % of the lowland rescuers at an altitude of 4 000 m."Rescue the rescuers"became the major task of Qinghai-Tibetan rescue teams,all the severe patients were rapidly descended to Xining and treated promptly and effectively. The outcome was excellent,all patients survived. After the earthquake,it is a long and arduous task to reconstruct what has been destroyed. Medical teams continue to work in the Yushu Earthquake area because about 30 000 workers and carders are now here for rebuilding the earthquake center. Thus the prevention and treatment of altitude illness are still critical tasks for medical teams. Although all the fights are successful,there are more experiences and lessons we have learned from the medical mountain rescue during the earthquake and the reconstruction,and reports here are to sum up our experiences from the medical mountain rescue operation in Yushu Earthquake and draw the lessons that we should learn. With the increasing of earthquake probability occurring in the Qinghai-Tibetan Plateau,we also should prepare against earthquake disasters and for further rescue training in the high mountains.
文摘Based on historical earthquake data, we use statistical methods to study integrated recurrence behaviors of strong earthquakes along 7 selected active fault zones in the Sichuan-Yunnan region. The results show that recurrences of strong earthquakes in the 7 fault zones display near-random, random and clustering behaviors. The recurrence processes are never quasi-periodic, and are neither strength-time nor time-strength dependent. The more independent segments for strong earthquake rupturing a fault zone has, the more complicated the corresponding recurrence process is. And relatively active periods and quiescent periods for earthquake activity occur alternatively. Within the active periods, the distribution of recurrence time intervals between earthquakes has relatively large discretion, and can be modelled well by a Weibull distribution. The time distribution of the quiescent periods has relatively small discretion, and can be approximately described by some distributions as the normal. Both the durations of the active periods and the numbers of strong earthquakes within the active periods vary obviously cycle by cycle, leading to the relatively active periods having never repeated quasi-periodically. Therefore, the probabilistic assessment for middle- and long-term seismic hazard for entireties of active fault zones based on data of historical strong earthquakes on the fault zones still faces difficulty.
基金jointly sponsored by the National Key Technology R&D Program(2012BAK19B01-04)the Special Fund of Youth Working Group,Institute of Earthquake Science,China Earthquake Administration
文摘In this paper,we introduce the tectonic setting,historical earthquake focal mechanisms and geodynamic environment of Tienshan and its neighboring regions, and draw a conclusion that large earthquakes in the Tienshan seismic zone are governed mainly by the pushing from Hindu Kush-Pamir syntax. Secondly,the relationship of large earthquakes in the Hindu Kush-Pamir region and the Tienshan seismic zone is investigated,and synchronization features are found existing in the grouped large earthquakes between the large earthquakes in two regions. The relationship between intermediate-focus large earthquakes in Hindu Kush-Pamir and shallow large earthquakes in the Tienshan seismic zone is also discussed. The same synchronization characteristics are found,and the intensity and frequency of intermediate-focus earthquakes are fiercer, while large earthquakes in the Tienshan seismic zone are more intense,with a wider distribution range. The above results confirm the geodynamic correlativity between Hindu Kush-Pamir and the Tienshan seismic zone from the viewpoint of seismicity.
文摘The results inferred from experiments with analogue models carried out previously have shown that two types of plastic-flow waves, “fast-waves" and “slow-waves", are induced in the lower lithosphere (including the lower crust and lithospheric mantle) under driving at plate boundaries and both of them are viscous gravity waves formed by the superposition of major and subsidiary waves. The major waves are similar to solitary waves and the subsidiary waves are traveling waves. The plastic-flow waves in the lower lithosphere control seismic activities in the overlying seismogenic layer and result in the distribution of earthquakes along the wave-crest belts. “Fast-waves" propagated with velocities of orders of magnitude of 100～102km/a have been verified by wave-controlled earthquake migration, showing the “decade waves" and “century waves" with the average periods of 10.8 and 93.4 a, respectively, which originate from the Himalayan driving boundary. According to the recognition of the patterns of the belt-like distribution of strong earthquakes with M S≥7.0, it is indicated further in this paper that the “slow-waves" with velocities of orders of magnitude of 100～101 m/a also originated under compression from the Himalayan driving boundary. Strong earthquakes with M S≥7.0 are controlled mainly by subsidiary waves, because the major waves with a duration of up to 106 a for each disturbance cannot result in the accumulation of enough energy for strong earthquakes due to the relaxation of the upper crust. The subsidiary waves propagate with an average wave length of 445 km, velocities of 0.81～2.80 m/a and periods of 0.16～0.55 Ma. The wave-generating time at the Himalayan driving boundary is about 1.34～4.59 Ma before present for the “slow-waves", corresponding to the stage from the Mid Pliocene to the Mid Early-Pleistocene and being identical with one of the major tectonic episodes of the Himalayan tectonic movement. It is shown from the recognition of the wave-controlled belts of strong earthquakes that two optimal patterns of wave-crest belts originated simultaneously from the eastern and western segments of the Himalayan arc, respectively. The overlap of wave-crest belts of these two systems is responsible for the relative concentration of energy and forms the seismic-energy-background zones for strong earthquakes with M S≥7.0.
文摘The tendency and dynamic characteristics of horizontal movement along the Shanxi fault zone have been analyzed using the data obtained from 6 repeated measurements (1996～2001) in the GPS monitoring network arranged along the Shanxi fault zone. The results indicate: (1) the tendentious activity of the present stage is characterized by a W trending movement along the northern segment of the zone, an E trending movement along the southern segment and counter clockwise differential activity on the whole, but the intensity of the tendentious activity is not high. The tendentious differential movement is only about 3 mm/a in the direction perpendicular to the fault zone from the south to the north, and its stretch in the SN direction is only 1 mm/a and mainly occurs along the north segment of the fault; (2) The azimuth of the principal compressive stress field reflected by the tendentious movement is 72°; (3) The property of annual activity is not the same, even contrary to one another or deviates from the tendentious activity. Therefore, the parameters of the strain field derived from them dont reflect the physical characteristics of the basic stress field. (4) The high frequency movement (yearly) does not only exist but is also complicated by an intensity several times higher than that of the tendentious movement; (5) Obvious differential movements, including strike slip, can not be seen in either in secular activity or annual activity on both sides of any fault. The tendentious movement not only verifies the conjecture of “strong in the south and weak in north”, which is the basic feature forcing the western boundary of the North China area, but it also extends to the hinterland of North China. The fact that there is no obvious differential activity on both sides of the fault might indicate that the differential activity among the intraplate blocks is completed by gradual variation in a certain space, rather than the abrupt change bordered by a fault or narrow stripe zone. The obvious dynamic activity might indicate: (1) there is stress disturbance in the basic stress field; (2) the inhomogeneous or non synchronous variation that appeared in the regional stress and strain fields was due to the different physical property of the medium; (3)the response occurred because of a variety of external variations. The movement in 2001 shows that the Daixian county and its adjacent area might be the boundary segment for the relative differential activity. More attention should be paid here.
基金sponsored by the Special Fund for Earthquake Trend Tracing from Department of Monitoring and Prediction of China Earthquake Administration
文摘This paper introduces the geological structure background around the 2014 Yutian Ms7. 3 earthquake area, investigates and analyzes the regime of small earthquake activity and the characteristics of regional seismicity pattern in Xinjiang before the earthquake, and compares the characteristics of the regional seismic activity with the 2008 Yutian Ms7.3 earthquake. The results show： ① 2 ~ 3 years before the 2014 Yutian Ms7. 3 earthquake, Xinjiang was in a seismic active state with strong earthquake occurring successively, and before the 2008 Ms 7. 3 earthquake, Xinjiang was in the quiet state of moderate-small earthquakes with M3. 0 ~ 4. 0. ② Before this Yutian Ms7. 3 earthquake, the regional seismic activity showed a short-term anomaly feature, that is, seismicity of M ≥ 5. 0 earthquakes significantly increased on the Altun seismic zone and in the source area three years before the Ms7.3 earthquake, while a five year long quiescence of seismicity of M ≥4. 0 earthquakes appeared on the east of the source area in a range of about 440kin. Six months before this M7. 3 earthquake, there existed seismic gap of M3. 0 ~ 4. 0 earthquakes and near-conjugate seismic belt magnitude 3. 0 and 4. 0 in the source area. ③ The state of strong earthquake activity and the seismicity pattern of small earthquakes before this Yutian Ms7. 3 earthquake were significantly different to that before the 2008 Yutian Ms7. 3 earthquake, and this may be related to the different seismogenic environments of the two Ms7. 3 earthquakes.
文摘An earthquake with magnitude of 5.7 took place on Aug. 18, 2003 in the Nyingchi Region, Tibet. The macroseismic epicenter was located in the unpopniated high mountain area, 13 km south of Zhamo town, Bond County. The seismic intensity in the meizoseismal region was Ⅶ degree. The Ⅶ and Ⅵ areas were 2000 km^2 and 11000 km^2 , respectively. This seismic event is related to the movements of the Lhari fault trending in the NW direction and the ZhamoManiweng fault trending in the NE direction. As a result of this earthquakes, the buildings in the areas were badly damaged.
基金sponsored by the Key Construction Programof the National Tenth"Five-year Plan"the Sub-project forthe Earthquake Active Fault Detecting Technology System(1-4-10)the Active Fault Detecting and Earthquake Risk Evaluation of Nanjing City
文摘The Changjiang fault zone,also known as the Mufushan-Jiaoshan fault,is a famous fault located at the southern bank of the Changjiang River,near the Nanjing downtown area.Based on multidisciplinary data from shallow artificial seismic explorations in the target detecting area(Nanjing city and the nearby areas),trenching and drilling explorations,classification of Quaternary strata and chronology dating data,this paper provides the most up-to-date results regarding activities of the Changjiang fault zone,including the most recent active time,activity nature,related active parameters,and their relation to seismic activity.
