3D elastic-plastic FE model for simulating the force controlled stretch-bending process of double-cavity aluminum profile was established using hybrid explicit−implicit solvent method.Considering the computational acc...3D elastic-plastic FE model for simulating the force controlled stretch-bending process of double-cavity aluminum profile was established using hybrid explicit−implicit solvent method.Considering the computational accuracy and efficiency,the optimal choices of numerical parameters and algorithms in FE modelling were determined.The formation mechanisms of cross-section distortion and springback were revealed.The effects of pre-stretching,post-stretching,friction,and the addition of internal fillers on forming quality were investigated.The results show that the stress state of profile in stretch-bending is uniaxial with only a circumferential stress.The stress distribution along the length direction of profile is non-uniform and the maximum tensile stress is located at a certain distance away from the center of profile.As aluminum profile is gradually attached to bending die,the distribution characteristic of cross-section distortion along the length direction of profile changes from V-shape to W-shape.After unloading the forming tools,cross-section distortion decreases obviously due to the stress relaxation,with a maximum distortion difference of 13%before and after unloading.As pre-stretching and post-stretching forces increase,cross-section distortion increases gradually,while springback first decreases and then remains unchanged.With increasing friction between bending die and profile,cross-section distortion slightly decreases,while springback increases.Cross-section distortion decreases by 83%with adding PVC fillers into the cavities of profile,while springback increases by 192.2%.展开更多
In order to accelerate the sedimentation of super-large-scale argillized ultrafine tailings with bad features such as low settling velocity, muddy overflow water, and large flocculant dosage, a fly-ash-based magnetic ...In order to accelerate the sedimentation of super-large-scale argillized ultrafine tailings with bad features such as low settling velocity, muddy overflow water, and large flocculant dosage, a fly-ash-based magnetic coagulant （FAMC） was used in a dynamic experimental device. To obtain the best possible combination of the impact factors （magnetic intensity, FAMC dosage, flocculant dosage, and feed speed） for minimum overflow turbidity, a response surface methodology test coupled with a four-factor five-level central composite design was conducted. The synergy mechanism of FAMC and flocculant was analyzed based on the potential measurement and scanning electron microscopy. The results show that the flocculant dosage, overflow turbidity, and solid content can be reduced by 50%, 90%, and 80%, while the handling capacity per unit and efficiency of backfill and dry stacking can be promoted by 20%, 17%, and 13%, respectively, with a magnetic intensity of 0.3 T, FAMC dosage of 200 mL/t, flocculant dosage of 30 g/t, and feed speed of 0.6 t/（m^2·h）. Therefore, synergy of FAMC and flocculant has obvious efficiency in saving energy and protecting the environment by allowing 70×10^6 t/a of argillized ultrafine tailings slurry to be disposed safely and efficiently with a cost saving of more than 53×106 Yuan/a, which gives it great promise for use in domestic and foreign mines.展开更多
Response surface method is used to study the reliability analysis of laterally loaded piles in sloping ground. A development load-displacement （p-y） curve for laterally loaded pile response in sloping ground is used...Response surface method is used to study the reliability analysis of laterally loaded piles in sloping ground. A development load-displacement （p-y） curve for laterally loaded pile response in sloping ground is used to model the pile-soil system, both the pile head displacement and the maximum bending moment of the piles are used as the performance criteria in this study. The reliability analysis method of the laterally loaded pile in sloping ground under the pile head displacement and the maximum bending moment failure modes is proposed, which is in good agreement with the Monte Carlo method. The influences on the probability index of failure by a number of parameters are discussed. It is shown that the variability of pile head displacement increases with the increase in the coefficients of variation of ultimate bearing capacity factor （Npu）, secant elastic modulus at 50%（E50） and level load （H）. A negative correlation between Npu and non-dimensional factor （λ） leads to less spread out probability density function （PDF） of the pile head displacement;in contrast, a positive correlation between Npu andλgives a great variation in the PDF of pile head displacement. As for bearing capacity factor on ground surface （Npo） and λ, both negative and positive correlations between them give a great variation in the PDF of pile head displacement, and a negative correlation will obviously increase the variability of the response.展开更多
In order to analyze the dynamic response of pavement on long-span steel bridge decks under random dynamic loads, the irregularities of the pavement surface is simulated with the power spectrum density function, and th...In order to analyze the dynamic response of pavement on long-span steel bridge decks under random dynamic loads, the irregularities of the pavement surface is simulated with the power spectrum density function, and the random load is calculated according to a vehicle vibration equation of vehicle model. The mechanical responses of three different cases are compared by using a transient dynamic analysis method, i. e., under random dynamic load, constant moving load and dead load respectively. The results indicate that the mid-span of two adjacent transversal diaphragms is the worst load position. The maximum vertical displacement and the maximum transversal tensile stress of the pavement are 1.33 times and 1.39 times as much as those when only considering the impact coefficients. This study not only provides a theoretical basis for the mixture design and structural design of pavement, but also puts forward higher demand on the construction and maintenance for steel deck pavement.展开更多
Using remote method invocation (RMI) and a distributed object-oriented technique, this paper presents a systematic approach to developing a manufacturing execution system (MES) framework, which is open, modularized, d...Using remote method invocation (RMI) and a distributed object-oriented technique, this paper presents a systematic approach to developing a manufacturing execution system (MES) framework, which is open, modularized, distributed, configurable, interoperable and maintainable. Moreover, the design patterns for the framework .are developed and a variety of functional components are designed by inheriting appropriate patterns. And then an application is constructed by invoking corresponding methods of related components. An MES system implementing the framework and design patterns can be facilely integrated with other manufacturing applications, such as enterprise resource planning (ERP) and floor control system (FCS) .展开更多
A learning algorithm based on a hard limiter for feedforward neural networks (NN) is presented,and is applied in solving classification problems on separable convex sets and disjoint sets.It has been proved that the a...A learning algorithm based on a hard limiter for feedforward neural networks (NN) is presented,and is applied in solving classification problems on separable convex sets and disjoint sets.It has been proved that the algorithm has stronger classification ability than that of the back propagation (BP) algorithm for the feedforward NN using sigmoid function by simulation.What is more,the models can be implemented with lower cost hardware than that of the BP NN.LEARNIN展开更多
According to the current research status of component retrieval, the component description model based on facet classification is improved by adding semantic features. Furthermore, the component retrieval process mode...According to the current research status of component retrieval, the component description model based on facet classification is improved by adding semantic features. Furthermore, the component retrieval process model is put forward by combining the domain ontology with the relative concept match algorithm. A detailed illustration of a component reasoning engine and a component classification engine is given and the component classification algorithm is provided by using the Naive Bayes algorithm based on domain ontology. The experimental results show that the recall ratio and the precision ratio are obviously improved by using the method based on semantics, and demonstrate the feasibility and effectiveness of the proposed method.展开更多
According to the survey of Guangdong mangrove resource in 2001 and authors field investigations in the past 5 years, the total mature mangrove land area of Guangdong Province was estimated at 9084 hm2, accounting for ...According to the survey of Guangdong mangrove resource in 2001 and authors field investigations in the past 5 years, the total mature mangrove land area of Guangdong Province was estimated at 9084 hm2, accounting for 41.4% of total mangrove land area of China. These mangrove forests totally consisted of 50 species belonging to 28 families, distributed at more than 100 locations along the coastlines of Guangdong and most of them present a high dense and dwarf appearance. The Ass. Avicennia marina is the most dominant mangrove association. The investigation results showed that the mangrove forests with coverage rates above 0.7 accounted for 68.0% of the total mangrove land area of the province and 77.8% of mangrove forests was less than 2 m in tree height. Since 1950, 54.6% of mangrove forests have disappeared due to paddy rice reclaim, aquaculture and city constructions. Derivational conservation efforts are still weakly empowered and should be strengthened intensively. The author suggested that mangrove laws and regulations should be enforced, mangrove scientific research should be strengthened; and mangrove conservation awareness of local community should be raised on conservation of mangroves.展开更多
Natural adsorbents such as banana pseudostem can play a vital role in the removal of heavy metal elements from wastewater. Major water resources and chemical industries have been encountering difficulties in re- movin...Natural adsorbents such as banana pseudostem can play a vital role in the removal of heavy metal elements from wastewater. Major water resources and chemical industries have been encountering difficulties in re- moving heavy metal elements using available conventional methods. This work demonstrates the potential to treat various effluents utilizing natural materials. A characterization of banana pseudostem powder was performed using environmental scanning electron microscopy （ESEM） and Fourier-transform infrared （FTIR） spectroscopy before and after the adsorption of lead（Ⅱ）. Experiments were carried out using a batch process for the removal of lead（Ⅱ） from an aqueous solution. The effects of the adsorption kinetics were studied by altering various parameters such as initial pH, adsorbent dosage, initial lead ion concentration, and contact time. The results show that the point of zero charge （PZC） for the banana pseudostem powder was achieved at a pH of 5.5. The experimental data were analyzed using isotherm and kinetic models. The adsorption of lead（Ⅱ） onto banana pseudostem powder was fitted using the Langmuir adsorption isotherm. The adsorp- tion capacity was found to be 34.21 mg·g-1, and the pseudo second-order kinetic model showed the best fit. The optimum conditions were found using response surface methodology. The maximum removal was found to be 89%.展开更多
An approach of limit state equation for surrounding rock was put forward based on deformation criterion. A method of symmetrical sampling of basic random variables adopted by classical response surface method was mend...An approach of limit state equation for surrounding rock was put forward based on deformation criterion. A method of symmetrical sampling of basic random variables adopted by classical response surface method was mended, and peak value and deflection degree of basic random variables distribution curve were took into account in the mended sampling method. A calculation way of probability moment, based on mended Rosenbluth method, suitable for non-explicit performance function was put forward. The first, second, third and fourth order moments of functional function value were calculated by mended Rosenbluth method through the first, second, third and fourth order moments of basic random variable. A probability density the function（PDF） of functional function was deduced through its first, second, third and fourth moments, the PDF in the new method took the place of the method of quadratic polynomial to approximate real functional function and reliability probability was calculated through integral by the PDF for random variable of functional function value in the new method. The result shows that the improved response surface method can adapt to various statistic distribution types of basic random variables, its calculation process is legible and need not itemtive circulation. In addition, a stability probability of surrounding rock for a tunnel was calculated by the improved method, whose workload is only 30% of classical method and its accuracy is comparative.展开更多
A Cr/SBA-16 catalyst was prepared using Cr（NO3）3 as a precursor and mesoporous silica SBA-16 as a support via a simple impregnation method. The catalyst was characterized using wide-angle X-ray diffraction （XRD）, ...A Cr/SBA-16 catalyst was prepared using Cr（NO3）3 as a precursor and mesoporous silica SBA-16 as a support via a simple impregnation method. The catalyst was characterized using wide-angle X-ray diffraction （XRD）, low-angle XRD, N2 adsorption-desorption, transmission electron microscopy, and ultraviolet-visible spectroscopy. The catalyst activity was investigated in the direct bydroxylation of benzene to phenol using H2O2 as the oxidant. Various operating variables, namely reaction temperature, reaction time, amount of H2O2, and catalyst dosage, were optimized using central composite design combined with response surface methodology （RSM）. The results showed that the correla- tion between the independent parameters and phenol yield was represented by a second-order polynomial model. The high correlation coefficient （R2）, i.e., 0.985, showed that the data predicted using RSM were in good agreement with the experimental results. The optimization results also showed that high selectivity for phenol was achieved at the optimized values of the operating variables： reaction temperature 324 K, reaction time 8 h, H2O2 content 3.28 mL, and catalyst dosage 0.09 g. This study showed that RSM was a reliable method for optimizing process variables for benzene hydroxylation to phenol.展开更多
Segmenting a complex 3D surface model into some visually meaningful sub-parts is one of the fundamental problems in digital geometry processing. In this paper, a novel segmentation approach of point-sampled surfaces i...Segmenting a complex 3D surface model into some visually meaningful sub-parts is one of the fundamental problems in digital geometry processing. In this paper, a novel segmentation approach of point-sampled surfaces is proposed, which is based on the level set evolution scheme. To segment the model so as to align the patch boundaries with high curvature zones, the driven speed function for the zero level set inside narrow band is defined by the extended curvature field, which approaches zero speed as the propagating front approaches high curvature zone. The effectiveness of the proposed approach is demonstrated by our ex- perimental results. Furthermore, two applications of model segmentation are illustrated, such as piecewise parameterization and local editing for point-sampled geometry.展开更多
Following the assumptions proposed by MESRI and ROKHSAR,the one-dimensional nonlinear consolidation problem of soil under constant loading is studied by introducing continuous drainage boundary.The numerical solution ...Following the assumptions proposed by MESRI and ROKHSAR,the one-dimensional nonlinear consolidation problem of soil under constant loading is studied by introducing continuous drainage boundary.The numerical solution is derived by using finite difference method and its correctness is assessed by comparing with existing analytical and numerical solutions.Based on the present solution,the effects of interface parameters,stress ratios(i.e.,final effective stress over initial effective stress,N_(σ))and the ratio c_(c)/c_(k)of compression index to permeability index on the consolidation behavior of soil are studied in detail.The results show that,the characteristics of one-dimensional nonlinear consolidation of soil are not only related to c_(c)/c_(k)and N_(σ),but also related to boundary conditions.In the engineering practice,the soil drainage rate of consolidation process can be designed by adjusting the values of interface parameters.展开更多
The photoabsorption cross sections of condensed atoms and molecules have proven to be dependent not only on the imaginary parts but also on the real parts of the polarizabilities due to the strong interatomie interact...The photoabsorption cross sections of condensed atoms and molecules have proven to be dependent not only on the imaginary parts but also on the real parts of the polarizabilities due to the strong interatomie interactions in condensed environment. The real parts of the polarizabilities calculated usually by using the famous Kramers-Kronig transformation （KKT） from the photoabsorption cross sections of the isolated atoms are very sensitive to the accuracy of the implementation method of the infinite integral in the KKT. The influence of the integral instability of the KKT and the real part of the polarizability on the variation of the photoabsorption cross sections with the number density and the structure of the condensed matter has been studied in the present work for the first time. The conclusion is that the integration method with interpolation has given more reasonable results than the direct truncation method if some appropriate interpolation functions have been used. Some notes and conclusions have also been given for the applications of the alternative coupled expressions of photoabsorption cross sections.展开更多
Aim To construct an analytic solution for the asymptotic field near a tensile cracktip of power-law hardening material under Plane stress condition. Methods Constructing funtion method was used. Results The exact as...Aim To construct an analytic solution for the asymptotic field near a tensile cracktip of power-law hardening material under Plane stress condition. Methods Constructing funtion method was used. Results The exact asymptotic field was found. Conclusion The exact analytic solution for the problem is available.展开更多
We present an extension of the Common Reflection Surface （CRS） stack that provides support for an arbitrary top surface topography. CRS stacking can be applied to the original prestack data without the need for any ...We present an extension of the Common Reflection Surface （CRS） stack that provides support for an arbitrary top surface topography. CRS stacking can be applied to the original prestack data without the need for any elevation statics. The CRS-stacked zero- offset section can be corrected （redatumed） to a given planar level by kinematic wave field attributes. The seismic processing results indicate that the CRS stacked section for rugged surface topography is better than the conventional stacked section for S/N ratio and better continuity of reflection events. Considering the multiple paths of zero-offset rays, the method deals with reflection information coming from different dips and performs the stack using the method of dip decomposition, which improves the kinematic and dynamic character of CRS stacked sections.展开更多
基金the National Natural Science Foundation of China(Nos.52005244,U20A20275)the Natural Science Foundation of Hunan Province,China(Nos.2021JJ30573,2023JJ60193)the Open Fund of State Key Laboratory of Advanced Design and Manufacture for Vehicle Body,China(No.31715011)。
文摘3D elastic-plastic FE model for simulating the force controlled stretch-bending process of double-cavity aluminum profile was established using hybrid explicit−implicit solvent method.Considering the computational accuracy and efficiency,the optimal choices of numerical parameters and algorithms in FE modelling were determined.The formation mechanisms of cross-section distortion and springback were revealed.The effects of pre-stretching,post-stretching,friction,and the addition of internal fillers on forming quality were investigated.The results show that the stress state of profile in stretch-bending is uniaxial with only a circumferential stress.The stress distribution along the length direction of profile is non-uniform and the maximum tensile stress is located at a certain distance away from the center of profile.As aluminum profile is gradually attached to bending die,the distribution characteristic of cross-section distortion along the length direction of profile changes from V-shape to W-shape.After unloading the forming tools,cross-section distortion decreases obviously due to the stress relaxation,with a maximum distortion difference of 13%before and after unloading.As pre-stretching and post-stretching forces increase,cross-section distortion increases gradually,while springback first decreases and then remains unchanged.With increasing friction between bending die and profile,cross-section distortion slightly decreases,while springback increases.Cross-section distortion decreases by 83%with adding PVC fillers into the cavities of profile,while springback increases by 192.2%.
基金Project(2012BAC09B02)supported by the 12th-Five Years Key Programs for Science and Technology Development of ChinaProject(2015zzts078)supported by the Fundamental Research Funds for the Central Universities of Central South University,ChinaProject(2015CX005)supported by Innovation Driven Plan of Central South University,China
文摘In order to accelerate the sedimentation of super-large-scale argillized ultrafine tailings with bad features such as low settling velocity, muddy overflow water, and large flocculant dosage, a fly-ash-based magnetic coagulant （FAMC） was used in a dynamic experimental device. To obtain the best possible combination of the impact factors （magnetic intensity, FAMC dosage, flocculant dosage, and feed speed） for minimum overflow turbidity, a response surface methodology test coupled with a four-factor five-level central composite design was conducted. The synergy mechanism of FAMC and flocculant was analyzed based on the potential measurement and scanning electron microscopy. The results show that the flocculant dosage, overflow turbidity, and solid content can be reduced by 50%, 90%, and 80%, while the handling capacity per unit and efficiency of backfill and dry stacking can be promoted by 20%, 17%, and 13%, respectively, with a magnetic intensity of 0.3 T, FAMC dosage of 200 mL/t, flocculant dosage of 30 g/t, and feed speed of 0.6 t/（m^2·h）. Therefore, synergy of FAMC and flocculant has obvious efficiency in saving energy and protecting the environment by allowing 70×10^6 t/a of argillized ultrafine tailings slurry to be disposed safely and efficiently with a cost saving of more than 53×106 Yuan/a, which gives it great promise for use in domestic and foreign mines.
基金Projects(5147847951322403)supported by the National Natural Science Foundation of China+3 种基金Project(2015CX005)supported by Innovation Driven Plan of Central South University,ChinaProject(14JJ4003)supported by Hunan Provincial Natural Science Foundation,ChinaProject(SKLGP2014K008)supported by Opening Fund of State Key Laboratory of Geohazard Prevention and Geoenvironment Protection,Chengdu University of Technology,ChinaProject(2015CB060200)supported by the National Basic Research Program of China
文摘Response surface method is used to study the reliability analysis of laterally loaded piles in sloping ground. A development load-displacement （p-y） curve for laterally loaded pile response in sloping ground is used to model the pile-soil system, both the pile head displacement and the maximum bending moment of the piles are used as the performance criteria in this study. The reliability analysis method of the laterally loaded pile in sloping ground under the pile head displacement and the maximum bending moment failure modes is proposed, which is in good agreement with the Monte Carlo method. The influences on the probability index of failure by a number of parameters are discussed. It is shown that the variability of pile head displacement increases with the increase in the coefficients of variation of ultimate bearing capacity factor （Npu）, secant elastic modulus at 50%（E50） and level load （H）. A negative correlation between Npu and non-dimensional factor （λ） leads to less spread out probability density function （PDF） of the pile head displacement;in contrast, a positive correlation between Npu andλgives a great variation in the PDF of pile head displacement. As for bearing capacity factor on ground surface （Npo） and λ, both negative and positive correlations between them give a great variation in the PDF of pile head displacement, and a negative correlation will obviously increase the variability of the response.
基金The National Natural Science Foundation of China(No.50578038)the Ph.D.Programs Foundation of Ministry of Education of China(No.20050286008)
文摘In order to analyze the dynamic response of pavement on long-span steel bridge decks under random dynamic loads, the irregularities of the pavement surface is simulated with the power spectrum density function, and the random load is calculated according to a vehicle vibration equation of vehicle model. The mechanical responses of three different cases are compared by using a transient dynamic analysis method, i. e., under random dynamic load, constant moving load and dead load respectively. The results indicate that the mid-span of two adjacent transversal diaphragms is the worst load position. The maximum vertical displacement and the maximum transversal tensile stress of the pavement are 1.33 times and 1.39 times as much as those when only considering the impact coefficients. This study not only provides a theoretical basis for the mixture design and structural design of pavement, but also puts forward higher demand on the construction and maintenance for steel deck pavement.
基金The National Natural Science Foundation of China (59990470).
文摘Using remote method invocation (RMI) and a distributed object-oriented technique, this paper presents a systematic approach to developing a manufacturing execution system (MES) framework, which is open, modularized, distributed, configurable, interoperable and maintainable. Moreover, the design patterns for the framework .are developed and a variety of functional components are designed by inheriting appropriate patterns. And then an application is constructed by invoking corresponding methods of related components. An MES system implementing the framework and design patterns can be facilely integrated with other manufacturing applications, such as enterprise resource planning (ERP) and floor control system (FCS) .
文摘A learning algorithm based on a hard limiter for feedforward neural networks (NN) is presented,and is applied in solving classification problems on separable convex sets and disjoint sets.It has been proved that the algorithm has stronger classification ability than that of the back propagation (BP) algorithm for the feedforward NN using sigmoid function by simulation.What is more,the models can be implemented with lower cost hardware than that of the BP NN.LEARNIN
基金The National Natural Science Foundation of China(No60072006)
文摘According to the current research status of component retrieval, the component description model based on facet classification is improved by adding semantic features. Furthermore, the component retrieval process model is put forward by combining the domain ontology with the relative concept match algorithm. A detailed illustration of a component reasoning engine and a component classification engine is given and the component classification algorithm is provided by using the Naive Bayes algorithm based on domain ontology. The experimental results show that the recall ratio and the precision ratio are obviously improved by using the method based on semantics, and demonstrate the feasibility and effectiveness of the proposed method.
文摘According to the survey of Guangdong mangrove resource in 2001 and authors field investigations in the past 5 years, the total mature mangrove land area of Guangdong Province was estimated at 9084 hm2, accounting for 41.4% of total mangrove land area of China. These mangrove forests totally consisted of 50 species belonging to 28 families, distributed at more than 100 locations along the coastlines of Guangdong and most of them present a high dense and dwarf appearance. The Ass. Avicennia marina is the most dominant mangrove association. The investigation results showed that the mangrove forests with coverage rates above 0.7 accounted for 68.0% of the total mangrove land area of the province and 77.8% of mangrove forests was less than 2 m in tree height. Since 1950, 54.6% of mangrove forests have disappeared due to paddy rice reclaim, aquaculture and city constructions. Derivational conservation efforts are still weakly empowered and should be strengthened intensively. The author suggested that mangrove laws and regulations should be enforced, mangrove scientific research should be strengthened; and mangrove conservation awareness of local community should be raised on conservation of mangroves.
基金印度Siddaganga Institute of Technology化学工程和生物技术系的支持~~
文摘Natural adsorbents such as banana pseudostem can play a vital role in the removal of heavy metal elements from wastewater. Major water resources and chemical industries have been encountering difficulties in re- moving heavy metal elements using available conventional methods. This work demonstrates the potential to treat various effluents utilizing natural materials. A characterization of banana pseudostem powder was performed using environmental scanning electron microscopy （ESEM） and Fourier-transform infrared （FTIR） spectroscopy before and after the adsorption of lead（Ⅱ）. Experiments were carried out using a batch process for the removal of lead（Ⅱ） from an aqueous solution. The effects of the adsorption kinetics were studied by altering various parameters such as initial pH, adsorbent dosage, initial lead ion concentration, and contact time. The results show that the point of zero charge （PZC） for the banana pseudostem powder was achieved at a pH of 5.5. The experimental data were analyzed using isotherm and kinetic models. The adsorption of lead（Ⅱ） onto banana pseudostem powder was fitted using the Langmuir adsorption isotherm. The adsorp- tion capacity was found to be 34.21 mg·g-1, and the pseudo second-order kinetic model showed the best fit. The optimum conditions were found using response surface methodology. The maximum removal was found to be 89%.
基金Project(50378036) supported by the National Natural Science Foundation of China Project (200503) supported by the Foundation ofCommunications Department of Hunan Province, China
文摘An approach of limit state equation for surrounding rock was put forward based on deformation criterion. A method of symmetrical sampling of basic random variables adopted by classical response surface method was mended, and peak value and deflection degree of basic random variables distribution curve were took into account in the mended sampling method. A calculation way of probability moment, based on mended Rosenbluth method, suitable for non-explicit performance function was put forward. The first, second, third and fourth order moments of functional function value were calculated by mended Rosenbluth method through the first, second, third and fourth order moments of basic random variable. A probability density the function（PDF） of functional function was deduced through its first, second, third and fourth moments, the PDF in the new method took the place of the method of quadratic polynomial to approximate real functional function and reliability probability was calculated through integral by the PDF for random variable of functional function value in the new method. The result shows that the improved response surface method can adapt to various statistic distribution types of basic random variables, its calculation process is legible and need not itemtive circulation. In addition, a stability probability of surrounding rock for a tunnel was calculated by the improved method, whose workload is only 30% of classical method and its accuracy is comparative.
基金the University of Tehran for financial support of this work
文摘A Cr/SBA-16 catalyst was prepared using Cr（NO3）3 as a precursor and mesoporous silica SBA-16 as a support via a simple impregnation method. The catalyst was characterized using wide-angle X-ray diffraction （XRD）, low-angle XRD, N2 adsorption-desorption, transmission electron microscopy, and ultraviolet-visible spectroscopy. The catalyst activity was investigated in the direct bydroxylation of benzene to phenol using H2O2 as the oxidant. Various operating variables, namely reaction temperature, reaction time, amount of H2O2, and catalyst dosage, were optimized using central composite design combined with response surface methodology （RSM）. The results showed that the correla- tion between the independent parameters and phenol yield was represented by a second-order polynomial model. The high correlation coefficient （R2）, i.e., 0.985, showed that the data predicted using RSM were in good agreement with the experimental results. The optimization results also showed that high selectivity for phenol was achieved at the optimized values of the operating variables： reaction temperature 324 K, reaction time 8 h, H2O2 content 3.28 mL, and catalyst dosage 0.09 g. This study showed that RSM was a reliable method for optimizing process variables for benzene hydroxylation to phenol.
基金Project supported by the National Basic Research Program (973) of China (No. 2002CB312101)the National Natural Science Foundation of China (Nos. 60503056, 60373036, 60333010)the Education Department of Zhejiang Province, China (No. 20060797)
文摘Segmenting a complex 3D surface model into some visually meaningful sub-parts is one of the fundamental problems in digital geometry processing. In this paper, a novel segmentation approach of point-sampled surfaces is proposed, which is based on the level set evolution scheme. To segment the model so as to align the patch boundaries with high curvature zones, the driven speed function for the zero level set inside narrow band is defined by the extended curvature field, which approaches zero speed as the propagating front approaches high curvature zone. The effectiveness of the proposed approach is demonstrated by our ex- perimental results. Furthermore, two applications of model segmentation are illustrated, such as piecewise parameterization and local editing for point-sampled geometry.
基金Projects(51678547,41672296,51878634,51878185,41867034)supported by the National Natural Science Foundation of China。
文摘Following the assumptions proposed by MESRI and ROKHSAR,the one-dimensional nonlinear consolidation problem of soil under constant loading is studied by introducing continuous drainage boundary.The numerical solution is derived by using finite difference method and its correctness is assessed by comparing with existing analytical and numerical solutions.Based on the present solution,the effects of interface parameters,stress ratios(i.e.,final effective stress over initial effective stress,N_(σ))and the ratio c_(c)/c_(k)of compression index to permeability index on the consolidation behavior of soil are studied in detail.The results show that,the characteristics of one-dimensional nonlinear consolidation of soil are not only related to c_(c)/c_(k)and N_(σ),but also related to boundary conditions.In the engineering practice,the soil drainage rate of consolidation process can be designed by adjusting the values of interface parameters.
基金Supported by the Natural Science Foundations of Ludong University under Grant Nos.22270301 and L20072804
文摘The photoabsorption cross sections of condensed atoms and molecules have proven to be dependent not only on the imaginary parts but also on the real parts of the polarizabilities due to the strong interatomie interactions in condensed environment. The real parts of the polarizabilities calculated usually by using the famous Kramers-Kronig transformation （KKT） from the photoabsorption cross sections of the isolated atoms are very sensitive to the accuracy of the implementation method of the infinite integral in the KKT. The influence of the integral instability of the KKT and the real part of the polarizability on the variation of the photoabsorption cross sections with the number density and the structure of the condensed matter has been studied in the present work for the first time. The conclusion is that the integration method with interpolation has given more reasonable results than the direct truncation method if some appropriate interpolation functions have been used. Some notes and conclusions have also been given for the applications of the alternative coupled expressions of photoabsorption cross sections.
文摘Aim To construct an analytic solution for the asymptotic field near a tensile cracktip of power-law hardening material under Plane stress condition. Methods Constructing funtion method was used. Results The exact asymptotic field was found. Conclusion The exact analytic solution for the problem is available.
基金This research work is sponsored by National Natural Science Foundation of China （40474041）, the Special Fund of the National ＂863＂ Project （2006AA06Z206）, and the CNPC Invention Foundation for Young- and Middle-aged Scientists （04E7040）, Postdoctoral Scientific Workstation in Zhongyuan 0il Field and the CNPC key Lab of Geophysical Exploration in China University of Petroleum （East China）.
文摘We present an extension of the Common Reflection Surface （CRS） stack that provides support for an arbitrary top surface topography. CRS stacking can be applied to the original prestack data without the need for any elevation statics. The CRS-stacked zero- offset section can be corrected （redatumed） to a given planar level by kinematic wave field attributes. The seismic processing results indicate that the CRS stacked section for rugged surface topography is better than the conventional stacked section for S/N ratio and better continuity of reflection events. Considering the multiple paths of zero-offset rays, the method deals with reflection information coming from different dips and performs the stack using the method of dip decomposition, which improves the kinematic and dynamic character of CRS stacked sections.
