期刊文献+
共找到10篇文章
< 1 >
每页显示 20 50 100
超声多谱勒频移测量电机机械特性
1
作者 许裕华 《实验技术与管理》 CAS 2000年第4期82-84,共3页
利用多谱勒效应,通过测量声波多普勒频移来测量电动机的转速与转矩,用计算机对数据进行处理,实现对电动机特性曲线的快速测量,为大批量电动机的测试提供了有效的检测手段。实验结果表明,该方法是可行的。
关键词 机械特性 超声测速 电机 超声多普勒频移测量
下载PDF
基于累积释放模型的测量电路研究
2
作者 陈琢 江皓 张宏 《电子测量技术》 2011年第4期4-6,10,共4页
在谐振式传感器、多普勒频移等应用中测量频率的相对变化更有用,因此探索对频率变化的精确测量有很现实的意义。以圆映射动力学为理论基础,按照累积-释放模型的变化规律设计测量电路。在一定的条件下,使电路处于混沌状态,这时的输出对... 在谐振式传感器、多普勒频移等应用中测量频率的相对变化更有用,因此探索对频率变化的精确测量有很现实的意义。以圆映射动力学为理论基础,按照累积-释放模型的变化规律设计测量电路。在一定的条件下,使电路处于混沌状态,这时的输出对频率的变化非常敏感。在输出轨道的符号序列与输入信号的频率之间建立对应关系,频率的微小变化可以转化为符号的变化。仿真研究和电路实验都表明,该方法容易实现较高的测量精度。 展开更多
关键词 圆映射 累积释放模型 频移测量
下载PDF
嫦娥一号卫星撞月时刻与坐标精确分析 被引量:4
3
作者 马茂莉 郑为民 +1 位作者 李金岭 王广利 《宇航学报》 EI CAS CSCD 北大核心 2011年第3期477-481,共5页
针对CE-1卫星精确的撞月时刻与撞月点坐标,首先通过探测器载波信号的本地相关处理技术,精确分析了载波信号在VLBI各测站的消失时刻,进而推算了卫星的撞月时刻;通过实时单向多普勒频移测量的事后分析,核实了卫星撞月过程中的飞行姿态演化... 针对CE-1卫星精确的撞月时刻与撞月点坐标,首先通过探测器载波信号的本地相关处理技术,精确分析了载波信号在VLBI各测站的消失时刻,进而推算了卫星的撞月时刻;通过实时单向多普勒频移测量的事后分析,核实了卫星撞月过程中的飞行姿态演化;最后结合VLBI互相关时延与测距资料,经定位归算确定撞月点坐标。分析表明,CE-1卫星撞月时刻的误差为±5μs,撞月点坐标月面切向和三维定位误差分别约为0.274km和0.319km(1σ)。 展开更多
关键词 嫦娥一号卫星 撞月时刻与坐标 本地相关测量 VLBI 多普勒频移测量 月球探测
下载PDF
采用光滤波器的边缘检测布里渊光纤传感系统 被引量:2
4
作者 万生鹏 何赛灵 胡建东 《传感技术学报》 CAS CSCD 北大核心 2005年第2期371-373,共3页
提出了采用边缘光滤波器来测量光纤传感中布里渊频域的方案。分析了影响布里渊频移测量精度的因素,给出了布里渊频移测量精度和信噪比的关系。结果表明,在热噪声近似下,布里渊频移测量精度与热噪声、边缘光滤波器透射函数的导数及布里... 提出了采用边缘光滤波器来测量光纤传感中布里渊频域的方案。分析了影响布里渊频移测量精度的因素,给出了布里渊频移测量精度和信噪比的关系。结果表明,在热噪声近似下,布里渊频移测量精度与热噪声、边缘光滤波器透射函数的导数及布里渊散射光信号功率有关。 展开更多
关键词 分布式光纤传感 边缘光滤波器 布里渊频移测量精度 信噪比
下载PDF
萤火一号火星探测器星地测控对接试验技术 被引量:4
5
作者 曹志宇 季刚 +1 位作者 李赞 黄磊 《上海航天》 2013年第4期220-225,共6页
介绍了萤火一号(YH-1)火星探测器星地对接测控试验任务及过程。给出了参与试验的YH-1火星探测器、俄罗斯与欧空局地面站设备等的组成和主要技术指标。介绍了试验项目及其原理,分析了副载波多普勒频移测量和电磁屏蔽等关键技术。列出了... 介绍了萤火一号(YH-1)火星探测器星地对接测控试验任务及过程。给出了参与试验的YH-1火星探测器、俄罗斯与欧空局地面站设备等的组成和主要技术指标。介绍了试验项目及其原理,分析了副载波多普勒频移测量和电磁屏蔽等关键技术。列出了试验确定的主要技术指标。试验结果证明YH-1火星探测器星地测控参数匹配,相关技术参数可满足火星探测要求,同时确认了地面改造建设是成功的。 展开更多
关键词 YH-1火星探测器 测控对接 深空测控站 副载波多普勒频移测量 电磁屏蔽
下载PDF
一种提高BOTDR系统信噪比的方法研究
6
作者 李勇涛 李永倩 +2 位作者 杨志 李保罡 黄春林 《光通信研究》 北大核心 2010年第5期49-51,67,共4页
提出了一种利用非线性反射镜提高布里渊光时域反射仪(BOTDR)系统信噪比的新型传感结构。通过将两根相同类型的传感光纤敷设在同一待测温度或应变环境下,结合光纤3 dB耦合器,可以形成非线性反射镜。利用非线性反射镜可以将传感系统输出... 提出了一种利用非线性反射镜提高布里渊光时域反射仪(BOTDR)系统信噪比的新型传感结构。通过将两根相同类型的传感光纤敷设在同一待测温度或应变环境下,结合光纤3 dB耦合器,可以形成非线性反射镜。利用非线性反射镜可以将传感系统输出信号的强度提高到只用一根传感光纤时的4倍,既能改善系统的信噪比及测量精度,也能提高传感系统的可靠性。 展开更多
关键词 非线性反射镜 布里渊光时域反射仪 强度测量 频移测量 可靠性
下载PDF
Radio Channel Measurements and Analysis at 2.4/5GHz in Subway Tunnels 被引量:11
7
作者 LI Jinxing ZHAO Youping +3 位作者 ZHANG Jing JIANG Rui TAO Cheng TAN Zhenhui 《China Communications》 SCIE CSCD 2015年第1期36-45,共10页
There is an increasing demand on wireless communications in subway tunnels to provide video surveillance and sensory data for security,maintenance and train control,and to offer various communication or entertainment ... There is an increasing demand on wireless communications in subway tunnels to provide video surveillance and sensory data for security,maintenance and train control,and to offer various communication or entertainment services(e.g.,Internet,etc.) to passengers as well.The wireless channel in tunnels is quite unique due to the confined space and the waveguide effects.Therefore,modeling the radio channel characteristics in tunnels is critically important for communication systems design or optimization.This paper investigates the key radio channel characteristics of a subway tunnel at 2.4 GHz and 5 GHz,such as the path loss,root mean square(RMS) delay spread,channel stationarity,Doppler shift,and channel capacity.The field measurements show that channel characteristics in tunnels are highly location-dependent and there exist abundant components in Doppler shift domain.In the straight section of the subway tunnel,the measured path loss exponents are close to1.6,lower than that in free space. 展开更多
关键词 broadband mobile communication channel measurement channel characteriza-tion subway tunnel
下载PDF
Application of Fiber in Blood Speed Measurement
8
作者 SHANG Li-ping, ZHENG De-zhong, XIE Hua-bing, SHI Jin-shan (Yanshan University, Qinhuangdao 066004, CHN) 《Semiconductor Photonics and Technology》 CAS 2000年第2期126-128,共3页
There exist many methods to measure blood speed, all of which have some serious shortcomings. As fiber is characterized by tiny diameter, and low lost ratio of power and flexibility, it is suitable for measuring blood... There exist many methods to measure blood speed, all of which have some serious shortcomings. As fiber is characterized by tiny diameter, and low lost ratio of power and flexibility, it is suitable for measuring blood speed. It is proved that the speedometer has high space resolving power,high time resolving power, and outstanding capability of approaching target, etc. 展开更多
关键词 FIBER Speed measurement Doppler frequency shifting
下载PDF
Measurement and analysis of Doppler shift for high-speed rail scenario
9
作者 丁建文 Jiang Wenyi +2 位作者 Zhong Zhangdui Guan Ke Ai Bo 《High Technology Letters》 EI CAS 2015年第2期192-199,共8页
Based on the analysis of the impact of Doppler shift to the railway dedicated mobile communication quality under the condition of high-speed mobility,this paper presents a Doppler shift measurement approach based on t... Based on the analysis of the impact of Doppler shift to the railway dedicated mobile communication quality under the condition of high-speed mobility,this paper presents a Doppler shift measurement approach based on the phase estimation of frequency correction channel(FCCH) which correctly reflects the time-varying characteristic of the channel with a testing system developed.The Doppler shift data under the high-speed condition is collected,processed,analyzed,and compared with the simulation results.The scientific laws of the Doppler shift distribution of radio channel under high-speed condition are obtained.These data and analysis are essential for the establishment of high-speed railway Doppler power spectrum model and the development of the key technology of antiDoppler shift. 展开更多
关键词 Doppler shift high-speed railway (HSR) phase estimation software radio
下载PDF
A robust system for real-time pedestrian detection and tracking 被引量:2
10
作者 李琦 邵春福 赵熠 《Journal of Central South University》 SCIE EI CAS 2014年第4期1643-1653,共11页
A real-time pedestrian detection and tracking system using a single video camera was developed to monitor pedestrians. This system contained six modules: video flow capture, pre-processing, movement detection, shadow ... A real-time pedestrian detection and tracking system using a single video camera was developed to monitor pedestrians. This system contained six modules: video flow capture, pre-processing, movement detection, shadow removal, tracking, and object classification. The Gaussian mixture model was utilized to extract the moving object from an image sequence segmented by the mean-shift technique in the pre-processing module. Shadow removal was used to alleviate the negative impact of the shadow to the detected objects. A model-free method was adopted to identify pedestrians. The maximum and minimum integration methods were developed to integrate multiple cues into the mean-shift algorithm and the initial tracking iteration with the competent integrated probability distribution map for object tracking. A simple but effective algorithm was proposed to handle full occlusion cases. The system was tested using real traffic videos from different sites. The results of the test confirm that the system is reliable and has an overall accuracy of over 85%. 展开更多
关键词 image processing technique pedestrian detection tracking video camera
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部