Activation of nuclear factor erythroid 2-related factor 2(Nrf2)by Kelch-like ECH-associated protein 1(Keap1)alkylation plays a central role in anti-inflammatory therapy.However,activators of Nrf2 through alkylation of...Activation of nuclear factor erythroid 2-related factor 2(Nrf2)by Kelch-like ECH-associated protein 1(Keap1)alkylation plays a central role in anti-inflammatory therapy.However,activators of Nrf2 through alkylation of Keap1-Kelch domain have not been identified.Deoxynyboquinone(DNQ)is a natural small molecule discovered from marine actinomycetes.The current study was designed to investigate the anti-inflammatory effects and molecular mechanisms of DNQ via alkylation of Keap1.DNQ exhibited significant anti-inflammatory properties both in vitro and in vivo.The pharmacophore responsible for the anti-inflammatory properties of DNQ was determined to be theα,β-unsaturated amides moieties by a chemical reaction between DNQ and N-acetylcysteine.DNQ exerted anti-inflammatory effects through activation of Nrf2/ARE pathway.Keap1 was demonstrated to be the direct target of DNQ and bound with DNQ through conjugate addition reaction involving alkylation.The specific alkylation site of DNQ on Keap1 for Nrf2 activation was elucidated with a synthesized probe in conjunction with liquid chromatography-tandem mass spectrometry.DNQ triggered the ubiquitination and subsequent degradation of Keap1 by alkylation of the cysteine residue 489(Cys489)on Keap1-Kelch domain,ultimately enabling the activation of Nrf2.Our findings revealed that DNQ exhibited potent anti-inflammatory capacity throughα,β-unsaturated amides moieties active group which specifically activated Nrf2 signal pathway via alkylation/ubiquitination of Keap1-Kelch domain,suggesting the potential values of targeting Cys489 on Keap1-Kelch domain by DNQ-like small molecules in inflammatory therapies.展开更多
Catalytic synthesis of m-diethylbenzene(m-DEB)through alkylation of ethylbenzene(EB)may be a promising alternative route in comparison with traditional rectification of mixed DEB,for which the top priority is to devel...Catalytic synthesis of m-diethylbenzene(m-DEB)through alkylation of ethylbenzene(EB)may be a promising alternative route in comparison with traditional rectification of mixed DEB,for which the top priority is to develop efficient and stable heterogeneous catalysts.Here,the spherical nano-ZSM-5 zeolite with abundant intergranular mesoporous is synthesized by the seed-mediated growth method for alkylation of EB with ethanol to produce m-DEB.The results show that the spherical nano-ZSM-5 zeolite exhibits better stability and higher alkylation activity at a lower temperature than those of commercial micropore ZSM-5.And then,the spherical nano-ZSM-5 is further modified by La_(2)O_(3) through acid treatment followed by immersion method.The acid treatment causes nano-ZSM-5 to exhibit the increased pore size but decreased the acid sites,and subsequent La_(2)O_(3) loading reintroduces the weak acid sites.As a result,the HNO_(3)-La_(2)O_(3)-modified catalyst exhibits a slight increase in EB conversion and DEB yield in comparison with unmodified one,and meanwhile,it still maintains high m-DEB selectivity.The catalyst after acid treatment achieves higher catalytic stability besides maintaining the high alkylation activity of EB with ethanol.The present study on the spherical nano-HZSM-5 zeolite and its modification catalyst with excellent alkylation ability provides new insights into the production of mDEB.展开更多
Lignin is the most abundant naturally phenolic biomass,and the synthesis of high-performance renewable fuel from lignin has attracted significant attention.We propose the efficient synthesis of high-density fuels usin...Lignin is the most abundant naturally phenolic biomass,and the synthesis of high-performance renewable fuel from lignin has attracted significant attention.We propose the efficient synthesis of high-density fuels using simulated lignin cracked oil in tandem with hydroalkylation and deoxygenation reactions.First,we investigated the reaction pathway for the hydroalkylation of phenol,which competes with the hydrodeoxygenation form cyclohexane.And then,we investigated the effects of metal catalyst types,the loading amount of metallic,acid dosage,and reactant ratio on the reaction results.The phenol hydroalkylation and hydrodeoxygenation were balanced when 180℃ and 5 MPa H_(2)with the alkanes yield of 95%.By extending the substrate to other lignin-derived phenolics and simulated lignin cracked oil,we obtained the polycyclic alkane fuel with high density of 0.918 g·ml^(-1)and calorific value of41.2 MJ·L^(-1).Besides,the fuel has good low-temperature properties(viscosity of 9.3 mm^(2)·s^(-1)at 20℃ and freezing point below-55℃),which is expected to be used as jet fuel.This work provides a promising way for the easy and green production of high-density fuel directly from real lignin oil.展开更多
Photocatalytic reduction of CO_(2) into fuel represents a promising approach for achieving carbon neutrality,while realizing high selectivity in this process is challenging due to uncontrollable reaction intermediate ...Photocatalytic reduction of CO_(2) into fuel represents a promising approach for achieving carbon neutrality,while realizing high selectivity in this process is challenging due to uncontrollable reaction intermediate and retarded desorption of target products.Engineering the interface microenvironment of catalysts has been proposed as a strategy to exert a significant influence on reaction outcomes,yet it remains a significant challenge.In this study,amino alkylation was successfully integrated into the melem unit of polymeric carbon nitrides(PCN),which could efficiently drive the photocatalytic CO_(2) reduction.Experimental characterization and theoretical calculations revealed that the introduction of amino alkylation lowers the energy barrier for CO_(2) reduction into^(*)COOH intermediate,transforming the adsorption of^(*)COOH intermediate from the endothermic to an exothermic process.Notably,the as-prepared materials demonstrated outstanding performance in photocatalytic CO_(2) reduction,yielding CO_(2)at a rate of 152.8μmol h^(-1) with a high selectivity of 95.4%and a quantum efficiency of 6.6%.展开更多
To expedite the development of industrial technology for producing 2-alkylanthraquinone,a novel pilot test of alkylation-oxidation technology was conducted.The process mainly included anthracene alkylation,separation ...To expedite the development of industrial technology for producing 2-alkylanthraquinone,a novel pilot test of alkylation-oxidation technology was conducted.The process mainly included anthracene alkylation,separation of anthracene and 2-alkylanthracene,oxidation of 2-alkylanthracene,and product purification.Optimal alkylation conditions yielded a 91.1%conversion of anthracene and a 71.73%selectivity for 2-alkylanthracene.To address the separation problem of anthracene and 2-alkylanthracene,solvent-assisted distillation technology was developed,resulting in a 98.9%purity of 2-alkylanthracene and a 91.82%separation yield.When the molar ratio of H2O_(2) to 2-alkylanthracene was 7:1,a 98.96%conversion of 2-alkylanthracene and a 99.94%selectivity for 2-alkylanthraquinone were achieved.A novel composition of 2-alkylanthraquinone,including 2-tert-butylanthraquinone,2-tert-amylanthraquinone,and 2-hexylanthraquinone,was developed.This composition could be effectively separated and purified through a combination of crystallization and washing processes.The elemental composition of the product met the existing standards,and its hydrogenation performance closely matched that of commercially available 2-tert-amylanthraquinone products.展开更多
Carbon nanofibers have revolutionized nanotechnology due to their potential applications in emerging frontiers of research and industrial sectors. This can be attributed to their superior properties such as higher mec...Carbon nanofibers have revolutionized nanotechnology due to their potential applications in emerging frontiers of research and industrial sectors. This can be attributed to their superior properties such as higher mechanical strength, unique surface characteristics, and improved adherence that is transmitted into the polymer matrix to form a nanocomposite with improved properties. Polymethyl methacrylate is a common carbon source for the synthesis of carbon nanofibres of its high mechanical strength, thermal stability, and low moisture and water absorbing capacity that allows its products to have several applications. In this work, we report the successful electrospinning of carbon nanofibres from Poly methyl methacrylate and functionalizing the resulting carbon nanofibres. The functionalized carbon nanofibres were analyzed to determine their solubility/dispersion in selected organic solvents, then characterized using Fourier transform infra-red spectroscopy, Raman spectroscopy, scanning electron microscopy combined with Energy dispersive spectroscopy and Thermalgravimetric analysis.展开更多
In the present work, the effect of oxides on the alkylation of benzene with 1-dodecene was comprehensively investigated over MCM-49 n-heptanol, n-heptaldehyde and n-heptanoic acid were selected as the model oxides her...In the present work, the effect of oxides on the alkylation of benzene with 1-dodecene was comprehensively investigated over MCM-49 n-heptanol, n-heptaldehyde and n-heptanoic acid were selected as the model oxides herein, and obvious decrease of lifetime could be caused by only trace amount of oxides added in the feedstocks. However, the deactivated catalysts were difficult to be regenerated by extraction with hot benzene. Additionally, coke-burning was also proved to be incapable to regenerate the deactivated catalysts mainly for the dealumination during calcination. Further characterizations complementary with DFT calculations were conducted to demonstrate that the deactivation was mainly due to the firm adsorption of oxides on the acid sites.展开更多
To better understand the benzene alkylation with chloroaluminate ionic liquids(ILs) as catalyst, the interfacial properties between the benzene/butene binary reactants and chloroaluminate ILs with varying cation alkyl...To better understand the benzene alkylation with chloroaluminate ionic liquids(ILs) as catalyst, the interfacial properties between the benzene/butene binary reactants and chloroaluminate ILs with varying cation alkyl chain length and different anions were investigated using molecular dynamics(MD) simulations. The results indicate that ILs can obviously improve the interfacial width, solubility and diffusion of reactants compared to H_(2)SO_(4). The longer alkyl chains of cations present a density enrichment at the interface and protrude into the binary reactants phase. Furthermore, the ILs consisting of 1-octyl-3-methylimidazolium cations([Omim]^(+)) and the stronger acidity heptachlorodialuminate anions([Al_(2)Cl_(7)]^(-)) are more beneficial to promote the interfacial width and facilitate the dissolution and diffusion of benzene in both the IL bulk and the interfacial region in comparison to the ones with shorter alkyl chains cations and weaker acidity anions. The information gives us a better guideline for the design of ILs for benzene alkylation.展开更多
We devoloped an efficient and simple method to synthesize fluorene derivatives via intramolecular Friedel-Crafts alkylation of chalcones.The transform is catalyzed by TfOH in CH_(3)NO_(2)at 80℃and the yield is up to ...We devoloped an efficient and simple method to synthesize fluorene derivatives via intramolecular Friedel-Crafts alkylation of chalcones.The transform is catalyzed by TfOH in CH_(3)NO_(2)at 80℃and the yield is up to 99%.展开更多
An Hβ-supported heteropoly acid （H3PW12O40 （HPW）/Hβ） catalyst was successfully prepared by wetness impregnation, and investigated in the alkylation of toluene with tert-butyl alcohol for the synthesis of 4-tert-...An Hβ-supported heteropoly acid （H3PW12O40 （HPW）/Hβ） catalyst was successfully prepared by wetness impregnation, and investigated in the alkylation of toluene with tert-butyl alcohol for the synthesis of 4-tert-butyltoluene （PTBT）. X-ray diffraction, scanning electron microscopy, transmis- sion electron microscopy, fourier-transform infrared spectroscopy, inductively coupled plas- ma-optical emission spectrometry, the brunauer emmett teller （BET） method, tempera- ture-programmed NH3 desorption, and pyridine adsorption infrared spectroscopy were used to characterize the catalyst. The results showed that loading HPW on Hβ effectively increased the B acidity and decreased the pore size of Hβ. The B acidity of HPW/Hβ was 142.97 μmol/g, which is 69.74% higher than that of Hβ （84.23 μmol/g）. The catalytic activity of the HPW/Hβ catalyst was much better than that of the parent Hβ zeolite because of its high B acidity. The toluene conversion over HPW/Hβ reached 73.1%, which is much higher than that achieved with Hβ （54.0%）. When HPW was loaded on Hβ, the BET surface area of Hβ decreased from 492.5 to 379.6 m2/g, accompa- nied by a significant decrease in the pore size from 3.90 to 3.17 nm. Shape selectivity can therefore play an important role and increase the product selectivity of the HPW/Hβ catalyst compared with that of the parent Hβ. PTBT （kinetic diameter 0.58 nm） can easily diffuse through the narrowed pores of HPW/Hβ, but 3-tert-butyltoluene （kinetic diameter 0.65 nm） diffusion is restricted because of steric hindrance in these narrow pores. This results in high PTBT selectivity over HPW/Hβ （around 81%）. The HPW/Hβ catalyst gave a stable catalytic performance in reusability tests.展开更多
Enantiomerically pure a-substituted bamino esters were prepared from natural L-a-amino acids through Arndt-Eistert homologation and diastereoselective aalkylation.
The acidity and acid distribution of hierarchical porous ZSM-5 were tailored via phosphate modification. The catalytic results showed that both benzene conversion and selectivity of toluene and xylene increased with t...The acidity and acid distribution of hierarchical porous ZSM-5 were tailored via phosphate modification. The catalytic results showed that both benzene conversion and selectivity of toluene and xylene increased with the presence of appropriate amount of phosphorus. Meanwhile, side reactions such as methanol to olefins related with the formation of by-product ethylbenzene formation and isomerization of xylene to meta-xylene were suppressed efficiently. The acid strength and sites amount of Br?nsted acid of the catalyst were crucial for improving benzene conversion and yield of xylene, whereas passivation of external surface acid sites played an important role in breaking thermodynamic equilibrium distribution of xylene isomers.展开更多
A series of ZSM-5 zeolites, with the morphologies of sphere, sphere with cubic particles on the surface, and cubic particles, were synthesized by hydrothermal method using n-butylamine as the template, assisted by the...A series of ZSM-5 zeolites, with the morphologies of sphere, sphere with cubic particles on the surface, and cubic particles, were synthesized by hydrothermal method using n-butylamine as the template, assisted by the addition of NaC1 and crystal seed. X-ray diffraction （XRD）, scanning electron microscope （SEM）, X-ray fluorescence （XRF） and temperature-programmed desorption of ammonia （NH3-TPD） were used to characterize these samples. The samples were tested with toluene methylation reaction. The modified sample composed of spherical particles with 3 μm crystal particles on the surface had a para-xylene selectivity of 95% and maintained 79% of the initial conversion after running the reaction for 50 h. This modified samole showed the best stability amonz the tested three modified samoles.展开更多
With the shape selective zeolite catalyst,toluene alkylation with methanol to para-xylene(MTPX)technology could produce highly pure para-xylene(PX)in one step.The lower feedstock cost and less energy consumption in pr...With the shape selective zeolite catalyst,toluene alkylation with methanol to para-xylene(MTPX)technology could produce highly pure para-xylene(PX)in one step.The lower feedstock cost and less energy consumption in products separation make it more competitive compared to the current toluene disproportionation route.Thus,MTPX is regarded as the most reasonable production route for PX production.This article reviews the strategies that applied to the preparation of high-performance catalysts for MTPX,with special focus on the precise control of pore dimension and acid sites distribution in zeolite to achieve the highest selectivity to PX.The outlook of the MTPX catalyst is also proposed to guide the catalyst development in the field.展开更多
A novel industrial process was designed for the highly selective production of ethylbenzene. It comprised of a reactor vessel, vapor phase ethylene feed stream, benzene and transalkylation feed stream. Especially the ...A novel industrial process was designed for the highly selective production of ethylbenzene. It comprised of a reactor vessel, vapor phase ethylene feed stream, benzene and transalkylation feed stream. Especially the product stream containing ethylbenzene was used to heat the reactor vessel, which consisted of an alkylation section, an upper heat exchange section, and a bottom heat exchange section. In such a novel reactor, vapor phase benzene and liquid phase benzene were coexisted due to the heat produced by isothermal reaction between the upper heat exchange section and the bottom heat exchange section. The process was demonstrated by the thermodynamic analysis and experimental results. In fact, during the 1010 hour-life-test of gas phase ethene with gas phase-liquid phase benzene alkylation reaction, the ethene conversion was above 95%, and the ethylbenzene selectivity was above 83% （only benzene feed） and even higher than 99% （benzene plus transalkylation feed）. At the same time, the xylene content in the ethylbenzene was less than 100 ppm when the reaction was carried out under the reaction conditions of 140-185℃ of temperature, 1.6-2.1 MPa of pressure, 3.0-5.5 of benzene/ethylene mole ratio, 4-6 v% of transalkylation feed/（benzene＋transalkylation feed）, 0.19-0.27 h^-1 of ethene space velocity, and 1000 g of 3998 catalyst loaded. Thus, compared with the conventional ethylbenzene synthesis route, the transalkylation reactor could be omitted in this novel industrial process.展开更多
The alkylation of benzene with isopropanol over beta-zeolite is a more cost-effective solution to cumene production. During the benzene alkylation cycles, the cumene selectivity slowly increased, while the benzene con...The alkylation of benzene with isopropanol over beta-zeolite is a more cost-effective solution to cumene production. During the benzene alkylation cycles, the cumene selectivity slowly increased, while the benzene conversion presented the sharp decrease due to catalyst deactivation. The deactivation mechanism of betazeolite catalyst was investigated by characterizing the fresh and used catalysts. The XRD, SEM and TEM results show that the crystalline and particle size of the beta-zeolite catalyst almost remained stable during the alkylation cycles. The drop in catalytic activity and benzene conversion could be explained by the TG, BET,NH_3-TPD and GC–MS results. The organic matters mainly consisted of ethylbenzene, p-xylene and 1-ethyl-3-(1-methyl) benzene produced in the benzene alkylation deposited in the catalyst, which strongly reduced the specific surface area of beta-zeolite catalyst. Moreover, during the reaction cycles, the amount of acidity also significantly decreased. As a result, the catalyst deactivation occurred. To maintain the catalytic performance,the catalyst regeneration was carried out by using ethanol rinse and calcination. The deactivated catalyst could be effectively regenerated by the calcination method and the good catalytic performance was obtained.展开更多
Aim To investigate the alkylation of 2-thiopyrimidine. Methods Treating the starting material 2-thiopyrimidine with chloromethyl ethers via a procedure of K2CO3 in DMF or with alkyl halide in CH3ONa-CH3OH at room temp...Aim To investigate the alkylation of 2-thiopyrimidine. Methods Treating the starting material 2-thiopyrimidine with chloromethyl ethers via a procedure of K2CO3 in DMF or with alkyl halide in CH3ONa-CH3OH at room temperature, to obtain the corresponding regioselective 2-S-allkyl pyrimidines. The products were determined by JH NMR, 2D NMR, IR and MS spectra. Results 2-S-alkyl-pyrimidines were regioselectively synthesized. Conclusion In different conditions with different alkyl halides, 2- thiouracil could be converted into the corresponding 2-S-alkylpyrimidines regioselectively.展开更多
Abstract The study on the catalysis of ionic liquids for alkylation of benzene with 1-octadecene to synthesize LAB （linear alkylbenzenes） was performed. The results showed that the most important factor that governe...Abstract The study on the catalysis of ionic liquids for alkylation of benzene with 1-octadecene to synthesize LAB （linear alkylbenzenes） was performed. The results showed that the most important factor that governed the conversion of olefin and selectivity of LAB was reaction temperature. Moreover, the effects of different ionic liquids and molar ratio of benzene to 1-octadecene on the conversion and selectivity were obviously in different degrees. The reaction temperature, molar ratio of benzene to 1-octadecene and the amount of catalyst were lower, compared with the traditional reaction technologies. The experimental results demonstrated that the ionic liquid had higher activity at 30℃, with over 98% selectivity of monoalkylbenzene and 100% conversion of the olefin at the molar ratio 0.08 of FeCl3 in ionic liquid to 1-octadecene and 10 for benzene to 1-octadecene.展开更多
Ball milling modification was performed on Cs/X catalysts before or after cesium ion exchange.Multiple characterization results(such as pyridine-FTIR,XPS,and solid-state NMR)demonstrated that ball milling played a dis...Ball milling modification was performed on Cs/X catalysts before or after cesium ion exchange.Multiple characterization results(such as pyridine-FTIR,XPS,and solid-state NMR)demonstrated that ball milling played a distinct role in these two different preparation procedures of the catalyst.Ball milling performed after the cesium modification has a strong influence on the Cs/X structure and acid-base properties,which results in the enhancement of the catalytic performance for side-chain methylation of toluene with methanol.Detailed studies revealed that ball milling intensified the interactions between oxides and molecular sieves,which not only increased the dispersion of the Cs species but also generated some weaker basic centers.It is proposed that the new basic centers could be Si-O-Cs and Al-O-Cs,which are produced by breaking of the Si-O-Al bonds of the zeolite framework under the synergetic effect of ball milling and alkali treatment.These new active sites may help to promote the side-chain methylation reaction.However,excessive ball milling will lead to the vanishing of zeolite micropores,thus deactivating side-chain methylation activity,which indicates that microporosity plays a key role in side-chain methylation and individual basic centers cannot catalyze this reaction.展开更多
A series of Cu-based catalysts were developed for alkylation of benzene with syngas. The catalyst samples were prepared by the impregnation method, and were characterized by XRD, XRF, NH3-TPD, and TEM and evaluated in...A series of Cu-based catalysts were developed for alkylation of benzene with syngas. The catalyst samples were prepared by the impregnation method, and were characterized by XRD, XRF, NH3-TPD, and TEM and evaluated in a fixed bed reactor. The optimized reaction temperature of Cu/Al2O3/ZSM-5 catalyst was 350 ℃, while higher contents of copper were conducive to alkylation of benzene with syngas. The new medium strength acid centers in the catalyst created by Cu were beneficial to alkylation. Hydrogenation reaction of CO was executed on the metal centers without dissociation, Dimethyl ether(DME) was the major intermediate over Cu-based catalysts. Higher selectivity of methylation and lower selectivity of heavy aromatics were confirmed after the second metal(Zn, Mn, or V) was added to the copper catalyst. Cu was partly covered by Zn in the Cu-Zn/Al2O3/ZSM-5 catalyst leading to low dispersion and low activity of copper. Cu-Mn/Al2O3/ZSM-5 catalyst possessed the best yield of methylation product. Cu-Mn composite oxides were probably formed in fresh catalyst, which blocked the sintering of Cu in the reaction process. The loading of Cu decreased dramatically after the introduction of V, while causing an increase of the amount of medium strength acid centers at the same time. V prevented the sintering of copper particles during the reducing process and had a promoting effect on the activity of Cu.展开更多
基金the Science and Technology Development Fund,Macao SAR(Grant Nos.:No.0159/2020/A3,No.0058/2020/AMJ,No.0096/2019/A2 and SKL-QRCM(UM)-2023-2025)the Research Committee of the University of Macao(Grant No.:MYRG2022-00189-ICMS)+2 种基金the Guangdong Provincial Special Fund for Marine Economic Development Project(Project No.:GDNRC[2021]48)National Natural Science Foundation of China(Grant No.:82260801)K.C.Wong Education Foundation(Grant No.:GJTD-2020-12).
文摘Activation of nuclear factor erythroid 2-related factor 2(Nrf2)by Kelch-like ECH-associated protein 1(Keap1)alkylation plays a central role in anti-inflammatory therapy.However,activators of Nrf2 through alkylation of Keap1-Kelch domain have not been identified.Deoxynyboquinone(DNQ)is a natural small molecule discovered from marine actinomycetes.The current study was designed to investigate the anti-inflammatory effects and molecular mechanisms of DNQ via alkylation of Keap1.DNQ exhibited significant anti-inflammatory properties both in vitro and in vivo.The pharmacophore responsible for the anti-inflammatory properties of DNQ was determined to be theα,β-unsaturated amides moieties by a chemical reaction between DNQ and N-acetylcysteine.DNQ exerted anti-inflammatory effects through activation of Nrf2/ARE pathway.Keap1 was demonstrated to be the direct target of DNQ and bound with DNQ through conjugate addition reaction involving alkylation.The specific alkylation site of DNQ on Keap1 for Nrf2 activation was elucidated with a synthesized probe in conjunction with liquid chromatography-tandem mass spectrometry.DNQ triggered the ubiquitination and subsequent degradation of Keap1 by alkylation of the cysteine residue 489(Cys489)on Keap1-Kelch domain,ultimately enabling the activation of Nrf2.Our findings revealed that DNQ exhibited potent anti-inflammatory capacity throughα,β-unsaturated amides moieties active group which specifically activated Nrf2 signal pathway via alkylation/ubiquitination of Keap1-Kelch domain,suggesting the potential values of targeting Cys489 on Keap1-Kelch domain by DNQ-like small molecules in inflammatory therapies.
基金Research support is from the Service Local Project of the Education Department of Liaoning Province(LJKMZ22021404,LF2019002 and LJKMZ22021423)the“Transformational Technologies for Clean Energy and Demonstration”,Strategic Priority Research Program of the Chinese Academy of Sciences,(XDA 21030500).
文摘Catalytic synthesis of m-diethylbenzene(m-DEB)through alkylation of ethylbenzene(EB)may be a promising alternative route in comparison with traditional rectification of mixed DEB,for which the top priority is to develop efficient and stable heterogeneous catalysts.Here,the spherical nano-ZSM-5 zeolite with abundant intergranular mesoporous is synthesized by the seed-mediated growth method for alkylation of EB with ethanol to produce m-DEB.The results show that the spherical nano-ZSM-5 zeolite exhibits better stability and higher alkylation activity at a lower temperature than those of commercial micropore ZSM-5.And then,the spherical nano-ZSM-5 is further modified by La_(2)O_(3) through acid treatment followed by immersion method.The acid treatment causes nano-ZSM-5 to exhibit the increased pore size but decreased the acid sites,and subsequent La_(2)O_(3) loading reintroduces the weak acid sites.As a result,the HNO_(3)-La_(2)O_(3)-modified catalyst exhibits a slight increase in EB conversion and DEB yield in comparison with unmodified one,and meanwhile,it still maintains high m-DEB selectivity.The catalyst after acid treatment achieves higher catalytic stability besides maintaining the high alkylation activity of EB with ethanol.The present study on the spherical nano-HZSM-5 zeolite and its modification catalyst with excellent alkylation ability provides new insights into the production of mDEB.
基金the support from National Key Research and Development Program of China(2021YFC2104400)the Tianjin Science and Technology Plan Project(21JCQNJC00340)the Haihe Laboratory of Sustainable Chemical Transformations for financial support。
文摘Lignin is the most abundant naturally phenolic biomass,and the synthesis of high-performance renewable fuel from lignin has attracted significant attention.We propose the efficient synthesis of high-density fuels using simulated lignin cracked oil in tandem with hydroalkylation and deoxygenation reactions.First,we investigated the reaction pathway for the hydroalkylation of phenol,which competes with the hydrodeoxygenation form cyclohexane.And then,we investigated the effects of metal catalyst types,the loading amount of metallic,acid dosage,and reactant ratio on the reaction results.The phenol hydroalkylation and hydrodeoxygenation were balanced when 180℃ and 5 MPa H_(2)with the alkanes yield of 95%.By extending the substrate to other lignin-derived phenolics and simulated lignin cracked oil,we obtained the polycyclic alkane fuel with high density of 0.918 g·ml^(-1)and calorific value of41.2 MJ·L^(-1).Besides,the fuel has good low-temperature properties(viscosity of 9.3 mm^(2)·s^(-1)at 20℃ and freezing point below-55℃),which is expected to be used as jet fuel.This work provides a promising way for the easy and green production of high-density fuel directly from real lignin oil.
基金financially supported by the National Natural Science Foundation of China(22309032)the Guangdong Basic and Applied Basic Research Foundation(2022A1515011737)+1 种基金the Science and Technology Program of Guangzhou(2023A04J1395)the GDAS’Project of Science and Technology Development(2021GDASYL-20210102010)。
文摘Photocatalytic reduction of CO_(2) into fuel represents a promising approach for achieving carbon neutrality,while realizing high selectivity in this process is challenging due to uncontrollable reaction intermediate and retarded desorption of target products.Engineering the interface microenvironment of catalysts has been proposed as a strategy to exert a significant influence on reaction outcomes,yet it remains a significant challenge.In this study,amino alkylation was successfully integrated into the melem unit of polymeric carbon nitrides(PCN),which could efficiently drive the photocatalytic CO_(2) reduction.Experimental characterization and theoretical calculations revealed that the introduction of amino alkylation lowers the energy barrier for CO_(2) reduction into^(*)COOH intermediate,transforming the adsorption of^(*)COOH intermediate from the endothermic to an exothermic process.Notably,the as-prepared materials demonstrated outstanding performance in photocatalytic CO_(2) reduction,yielding CO_(2)at a rate of 152.8μmol h^(-1) with a high selectivity of 95.4%and a quantum efficiency of 6.6%.
基金supported by a grant from the National Natural Science Foundation of China(NSFC 22378437)the SINOPEC Excellent Youth Funds(ST22174).
文摘To expedite the development of industrial technology for producing 2-alkylanthraquinone,a novel pilot test of alkylation-oxidation technology was conducted.The process mainly included anthracene alkylation,separation of anthracene and 2-alkylanthracene,oxidation of 2-alkylanthracene,and product purification.Optimal alkylation conditions yielded a 91.1%conversion of anthracene and a 71.73%selectivity for 2-alkylanthracene.To address the separation problem of anthracene and 2-alkylanthracene,solvent-assisted distillation technology was developed,resulting in a 98.9%purity of 2-alkylanthracene and a 91.82%separation yield.When the molar ratio of H2O_(2) to 2-alkylanthracene was 7:1,a 98.96%conversion of 2-alkylanthracene and a 99.94%selectivity for 2-alkylanthraquinone were achieved.A novel composition of 2-alkylanthraquinone,including 2-tert-butylanthraquinone,2-tert-amylanthraquinone,and 2-hexylanthraquinone,was developed.This composition could be effectively separated and purified through a combination of crystallization and washing processes.The elemental composition of the product met the existing standards,and its hydrogenation performance closely matched that of commercially available 2-tert-amylanthraquinone products.
文摘Carbon nanofibers have revolutionized nanotechnology due to their potential applications in emerging frontiers of research and industrial sectors. This can be attributed to their superior properties such as higher mechanical strength, unique surface characteristics, and improved adherence that is transmitted into the polymer matrix to form a nanocomposite with improved properties. Polymethyl methacrylate is a common carbon source for the synthesis of carbon nanofibres of its high mechanical strength, thermal stability, and low moisture and water absorbing capacity that allows its products to have several applications. In this work, we report the successful electrospinning of carbon nanofibres from Poly methyl methacrylate and functionalizing the resulting carbon nanofibres. The functionalized carbon nanofibres were analyzed to determine their solubility/dispersion in selected organic solvents, then characterized using Fourier transform infra-red spectroscopy, Raman spectroscopy, scanning electron microscopy combined with Energy dispersive spectroscopy and Thermalgravimetric analysis.
文摘In the present work, the effect of oxides on the alkylation of benzene with 1-dodecene was comprehensively investigated over MCM-49 n-heptanol, n-heptaldehyde and n-heptanoic acid were selected as the model oxides herein, and obvious decrease of lifetime could be caused by only trace amount of oxides added in the feedstocks. However, the deactivated catalysts were difficult to be regenerated by extraction with hot benzene. Additionally, coke-burning was also proved to be incapable to regenerate the deactivated catalysts mainly for the dealumination during calcination. Further characterizations complementary with DFT calculations were conducted to demonstrate that the deactivation was mainly due to the firm adsorption of oxides on the acid sites.
基金The financial support by State Key Laboratory of Heavy Oil Processing, China University of Petroleum。
文摘To better understand the benzene alkylation with chloroaluminate ionic liquids(ILs) as catalyst, the interfacial properties between the benzene/butene binary reactants and chloroaluminate ILs with varying cation alkyl chain length and different anions were investigated using molecular dynamics(MD) simulations. The results indicate that ILs can obviously improve the interfacial width, solubility and diffusion of reactants compared to H_(2)SO_(4). The longer alkyl chains of cations present a density enrichment at the interface and protrude into the binary reactants phase. Furthermore, the ILs consisting of 1-octyl-3-methylimidazolium cations([Omim]^(+)) and the stronger acidity heptachlorodialuminate anions([Al_(2)Cl_(7)]^(-)) are more beneficial to promote the interfacial width and facilitate the dissolution and diffusion of benzene in both the IL bulk and the interfacial region in comparison to the ones with shorter alkyl chains cations and weaker acidity anions. The information gives us a better guideline for the design of ILs for benzene alkylation.
文摘We devoloped an efficient and simple method to synthesize fluorene derivatives via intramolecular Friedel-Crafts alkylation of chalcones.The transform is catalyzed by TfOH in CH_(3)NO_(2)at 80℃and the yield is up to 99%.
文摘An Hβ-supported heteropoly acid （H3PW12O40 （HPW）/Hβ） catalyst was successfully prepared by wetness impregnation, and investigated in the alkylation of toluene with tert-butyl alcohol for the synthesis of 4-tert-butyltoluene （PTBT）. X-ray diffraction, scanning electron microscopy, transmis- sion electron microscopy, fourier-transform infrared spectroscopy, inductively coupled plas- ma-optical emission spectrometry, the brunauer emmett teller （BET） method, tempera- ture-programmed NH3 desorption, and pyridine adsorption infrared spectroscopy were used to characterize the catalyst. The results showed that loading HPW on Hβ effectively increased the B acidity and decreased the pore size of Hβ. The B acidity of HPW/Hβ was 142.97 μmol/g, which is 69.74% higher than that of Hβ （84.23 μmol/g）. The catalytic activity of the HPW/Hβ catalyst was much better than that of the parent Hβ zeolite because of its high B acidity. The toluene conversion over HPW/Hβ reached 73.1%, which is much higher than that achieved with Hβ （54.0%）. When HPW was loaded on Hβ, the BET surface area of Hβ decreased from 492.5 to 379.6 m2/g, accompa- nied by a significant decrease in the pore size from 3.90 to 3.17 nm. Shape selectivity can therefore play an important role and increase the product selectivity of the HPW/Hβ catalyst compared with that of the parent Hβ. PTBT （kinetic diameter 0.58 nm） can easily diffuse through the narrowed pores of HPW/Hβ, but 3-tert-butyltoluene （kinetic diameter 0.65 nm） diffusion is restricted because of steric hindrance in these narrow pores. This results in high PTBT selectivity over HPW/Hβ （around 81%）. The HPW/Hβ catalyst gave a stable catalytic performance in reusability tests.
基金The project is generously supported by the National Natural Science Foundation of China (Grant No. 29972002 20172002)+1 种基金 the Trans-Century Training Programme Foundation for the Talents by Ministry of Education and Bayer Co. Ltd (Germany). We thank Dr
文摘Enantiomerically pure a-substituted bamino esters were prepared from natural L-a-amino acids through Arndt-Eistert homologation and diastereoselective aalkylation.
基金Supported by the National Natural Science Foundation of China(21476207,21506189)Zhejiang Postdoctoral Research Funded Projects(BSH1502147)
文摘The acidity and acid distribution of hierarchical porous ZSM-5 were tailored via phosphate modification. The catalytic results showed that both benzene conversion and selectivity of toluene and xylene increased with the presence of appropriate amount of phosphorus. Meanwhile, side reactions such as methanol to olefins related with the formation of by-product ethylbenzene formation and isomerization of xylene to meta-xylene were suppressed efficiently. The acid strength and sites amount of Br?nsted acid of the catalyst were crucial for improving benzene conversion and yield of xylene, whereas passivation of external surface acid sites played an important role in breaking thermodynamic equilibrium distribution of xylene isomers.
文摘A series of ZSM-5 zeolites, with the morphologies of sphere, sphere with cubic particles on the surface, and cubic particles, were synthesized by hydrothermal method using n-butylamine as the template, assisted by the addition of NaC1 and crystal seed. X-ray diffraction （XRD）, scanning electron microscope （SEM）, X-ray fluorescence （XRF） and temperature-programmed desorption of ammonia （NH3-TPD） were used to characterize these samples. The samples were tested with toluene methylation reaction. The modified sample composed of spherical particles with 3 μm crystal particles on the surface had a para-xylene selectivity of 95% and maintained 79% of the initial conversion after running the reaction for 50 h. This modified samole showed the best stability amonz the tested three modified samoles.
基金the funding support(Project No.:CF9300172922)from National Institute of Clean-and-low-carbon Energy.
文摘With the shape selective zeolite catalyst,toluene alkylation with methanol to para-xylene(MTPX)technology could produce highly pure para-xylene(PX)in one step.The lower feedstock cost and less energy consumption in products separation make it more competitive compared to the current toluene disproportionation route.Thus,MTPX is regarded as the most reasonable production route for PX production.This article reviews the strategies that applied to the preparation of high-performance catalysts for MTPX,with special focus on the precise control of pore dimension and acid sites distribution in zeolite to achieve the highest selectivity to PX.The outlook of the MTPX catalyst is also proposed to guide the catalyst development in the field.
基金This work is supported by the National 973 Project of China (2009CB623501)
文摘A novel industrial process was designed for the highly selective production of ethylbenzene. It comprised of a reactor vessel, vapor phase ethylene feed stream, benzene and transalkylation feed stream. Especially the product stream containing ethylbenzene was used to heat the reactor vessel, which consisted of an alkylation section, an upper heat exchange section, and a bottom heat exchange section. In such a novel reactor, vapor phase benzene and liquid phase benzene were coexisted due to the heat produced by isothermal reaction between the upper heat exchange section and the bottom heat exchange section. The process was demonstrated by the thermodynamic analysis and experimental results. In fact, during the 1010 hour-life-test of gas phase ethene with gas phase-liquid phase benzene alkylation reaction, the ethene conversion was above 95%, and the ethylbenzene selectivity was above 83% （only benzene feed） and even higher than 99% （benzene plus transalkylation feed）. At the same time, the xylene content in the ethylbenzene was less than 100 ppm when the reaction was carried out under the reaction conditions of 140-185℃ of temperature, 1.6-2.1 MPa of pressure, 3.0-5.5 of benzene/ethylene mole ratio, 4-6 v% of transalkylation feed/（benzene＋transalkylation feed）, 0.19-0.27 h^-1 of ethene space velocity, and 1000 g of 3998 catalyst loaded. Thus, compared with the conventional ethylbenzene synthesis route, the transalkylation reactor could be omitted in this novel industrial process.
基金Supports by the National Key Research and Development Plan(2016YFB0301503)the Jiangsu Natural Science Foundation for Distinguished Young Scholars(BK20150044)+3 种基金the National Natural Science Foundation of China(91534110,21606124)the Natural Science Foundation of the Higher Education Institutions of Jiangsu Province(14KJB530004)the Foundation from State Key Laboratory of Materials-Oriented Chemical Engineering(ZK201402,ZK201407)the Technology Innovation Foundation for Science and Technology Enterprises in Jiangsu Province(BC2015008)
文摘The alkylation of benzene with isopropanol over beta-zeolite is a more cost-effective solution to cumene production. During the benzene alkylation cycles, the cumene selectivity slowly increased, while the benzene conversion presented the sharp decrease due to catalyst deactivation. The deactivation mechanism of betazeolite catalyst was investigated by characterizing the fresh and used catalysts. The XRD, SEM and TEM results show that the crystalline and particle size of the beta-zeolite catalyst almost remained stable during the alkylation cycles. The drop in catalytic activity and benzene conversion could be explained by the TG, BET,NH_3-TPD and GC–MS results. The organic matters mainly consisted of ethylbenzene, p-xylene and 1-ethyl-3-(1-methyl) benzene produced in the benzene alkylation deposited in the catalyst, which strongly reduced the specific surface area of beta-zeolite catalyst. Moreover, during the reaction cycles, the amount of acidity also significantly decreased. As a result, the catalyst deactivation occurred. To maintain the catalytic performance,the catalyst regeneration was carried out by using ethanol rinse and calcination. The deactivated catalyst could be effectively regenerated by the calcination method and the good catalytic performance was obtained.
基金National Nature Science Foundation of China(NO.20172007).
文摘Aim To investigate the alkylation of 2-thiopyrimidine. Methods Treating the starting material 2-thiopyrimidine with chloromethyl ethers via a procedure of K2CO3 in DMF or with alkyl halide in CH3ONa-CH3OH at room temperature, to obtain the corresponding regioselective 2-S-allkyl pyrimidines. The products were determined by JH NMR, 2D NMR, IR and MS spectra. Results 2-S-alkyl-pyrimidines were regioselectively synthesized. Conclusion In different conditions with different alkyl halides, 2- thiouracil could be converted into the corresponding 2-S-alkylpyrimidines regioselectively.
基金Supported by the National Natural Science Foundation of China （No.20276038） and Beijing Natural Science Foundation （No.2052010）.
文摘Abstract The study on the catalysis of ionic liquids for alkylation of benzene with 1-octadecene to synthesize LAB （linear alkylbenzenes） was performed. The results showed that the most important factor that governed the conversion of olefin and selectivity of LAB was reaction temperature. Moreover, the effects of different ionic liquids and molar ratio of benzene to 1-octadecene on the conversion and selectivity were obviously in different degrees. The reaction temperature, molar ratio of benzene to 1-octadecene and the amount of catalyst were lower, compared with the traditional reaction technologies. The experimental results demonstrated that the ionic liquid had higher activity at 30℃, with over 98% selectivity of monoalkylbenzene and 100% conversion of the olefin at the molar ratio 0.08 of FeCl3 in ionic liquid to 1-octadecene and 10 for benzene to 1-octadecene.
文摘Ball milling modification was performed on Cs/X catalysts before or after cesium ion exchange.Multiple characterization results(such as pyridine-FTIR,XPS,and solid-state NMR)demonstrated that ball milling played a distinct role in these two different preparation procedures of the catalyst.Ball milling performed after the cesium modification has a strong influence on the Cs/X structure and acid-base properties,which results in the enhancement of the catalytic performance for side-chain methylation of toluene with methanol.Detailed studies revealed that ball milling intensified the interactions between oxides and molecular sieves,which not only increased the dispersion of the Cs species but also generated some weaker basic centers.It is proposed that the new basic centers could be Si-O-Cs and Al-O-Cs,which are produced by breaking of the Si-O-Al bonds of the zeolite framework under the synergetic effect of ball milling and alkali treatment.These new active sites may help to promote the side-chain methylation reaction.However,excessive ball milling will lead to the vanishing of zeolite micropores,thus deactivating side-chain methylation activity,which indicates that microporosity plays a key role in side-chain methylation and individual basic centers cannot catalyze this reaction.
文摘A series of Cu-based catalysts were developed for alkylation of benzene with syngas. The catalyst samples were prepared by the impregnation method, and were characterized by XRD, XRF, NH3-TPD, and TEM and evaluated in a fixed bed reactor. The optimized reaction temperature of Cu/Al2O3/ZSM-5 catalyst was 350 ℃, while higher contents of copper were conducive to alkylation of benzene with syngas. The new medium strength acid centers in the catalyst created by Cu were beneficial to alkylation. Hydrogenation reaction of CO was executed on the metal centers without dissociation, Dimethyl ether(DME) was the major intermediate over Cu-based catalysts. Higher selectivity of methylation and lower selectivity of heavy aromatics were confirmed after the second metal(Zn, Mn, or V) was added to the copper catalyst. Cu was partly covered by Zn in the Cu-Zn/Al2O3/ZSM-5 catalyst leading to low dispersion and low activity of copper. Cu-Mn/Al2O3/ZSM-5 catalyst possessed the best yield of methylation product. Cu-Mn composite oxides were probably formed in fresh catalyst, which blocked the sintering of Cu in the reaction process. The loading of Cu decreased dramatically after the introduction of V, while causing an increase of the amount of medium strength acid centers at the same time. V prevented the sintering of copper particles during the reducing process and had a promoting effect on the activity of Cu.
