A Josephson traveling wave parametric amplifier(JTWPA),which is a quantum-limited amplifier with high gain and large bandwidth,is the core device of large-scale measurement and control systems for quantum computing.A ...A Josephson traveling wave parametric amplifier(JTWPA),which is a quantum-limited amplifier with high gain and large bandwidth,is the core device of large-scale measurement and control systems for quantum computing.A typical JTWPA consists of thousands of Josephson junctions connected in series to form a transmission line and hundreds of shunt LC resonators periodically loaded along the line for phase matching.Because the variation of these capacitors and inductors can be detrimental to their high-frequency characteristics,the fabrication of a JTWPA typically necessitates precise processing equipment.To guide the fabrication process and further improve the design for manufacturability,it is necessary to understand how each electronic component affects the amplifier.In this paper,we use the harmonic balance method to conduct a comprehensive study on the impact of nonuniformity and fabrication yield of the electronic components on the performance of a JTWPA.The results provide insightful and scientific guidance for device design and fabrication processes.展开更多
For time-of-flight(TOF)light detection and ranging(LiDAR),a three-channel high-performance transimpedance amplifier(TIA)with high immunity to input load capacitance is presented.A regulated cascade(RGC)as the input st...For time-of-flight(TOF)light detection and ranging(LiDAR),a three-channel high-performance transimpedance amplifier(TIA)with high immunity to input load capacitance is presented.A regulated cascade(RGC)as the input stage is at the core of the complementary metal oxide semiconductor(CMOS)circuit chip,giving it more immunity to input photodiode detectors.A simple smart output interface acting as a feedback structure,which is rarely found in other designs,reduces the chip size and power consumption simultaneously.The circuit is designed using a 0.5μm CMOS process technology to achieve low cost.The device delivers a 33.87 dB?transimpedance gain at 350 MHz.With a higher input load capacitance,it shows a-3 dB bandwidth of 461 MHz,indicating a better detector tolerance at the front end of the system.Under a 3.3 V supply voltage,the device consumes 5.2 mW,and the total chip area with three channels is 402.8×597.0μm2(including the test pads).展开更多
Most modern microprocessors have one or two levels of on-chip caches to make things run faster,but this is not always the case.Most of the time,these caches are made of static random access memory cells.They take up a...Most modern microprocessors have one or two levels of on-chip caches to make things run faster,but this is not always the case.Most of the time,these caches are made of static random access memory cells.They take up a lot of space on the chip and use a lot of electricity.A lot of the time,low power is more important than several aspects.This is true for phones and tablets.Cache memory design for single bit architecture consists of six transistors static random access memory cell,a circuit of write driver,and sense amplifiers(such as voltage differential sense amplifier,current differential sense amplifier,charge transfer differential sense amplifier,voltage latch sense amplifier,and current latch sense amplifier,all of which are compared on different resistance values in terms of a number of transistors,delay in sensing and consumption of power.The conclusion arises that single bit six transistor static random access memory cell voltage differential sense amplifier architecture consumes 11.34μW of power which shows that power is reduced up to 83%,77.75%reduction in the case of the current differential sense amplifier,39.62%in case of charge transfer differential sense amplifier and 50%in case of voltage latch sense amplifier when compared to existing latch sense amplifier architecture.Furthermore,power reduction techniques are applied over different blocks of cache memory architecture to optimize energy.The single-bit six transistors static random access memory cell with forced tack technique and voltage differential sense amplifier with dual sleep technique consumes 8.078μW of power,i.e.,reduce 28%more power that makes single bit six transistor static random access memory cell with forced tack technique and voltage differential sense amplifier with dual sleep technique more energy efficient.展开更多
Considering the R&D for upgrading the K^(0)_(L) andμdetectors in the Belle II experiment using a scintillator and silicon pho-tomultiplier(SiPM),we designed a compact high-speed and low-noise preamplifier.The pre...Considering the R&D for upgrading the K^(0)_(L) andμdetectors in the Belle II experiment using a scintillator and silicon pho-tomultiplier(SiPM),we designed a compact high-speed and low-noise preamplifier.The preamplifier demonstrated a good gain stability,bandwidth of 426 MHz,baseline noise level ofσ≈0.6 mV,dynamic range of up to170 mV of the input signal amplitude,good time resolution of 20 ps,and it can be comprehensively applied to SiPMs.Adopting pole-zero-cancelation in the preamplifier reduces both the rise and fall times of the SiPM signal,which can significantly improve the time resolution and reduce the pile-up when using a large SiPM or an array of SiPMs.Various combinations of the preamplifier and several types of SiPMs demonstrated time resolutions better than 50 ps for most cases;when the number of detected photons was larger than 60,a time resolution of approximately 25 ps was achieved.展开更多
In this paper,a 5G wideband power amplifier(PA)with bandpass filtering response is synthesized using a bandwidth-extended bandpass filter as the matching network(MN).In this structure,the bandwidth(θ_(C))is defined a...In this paper,a 5G wideband power amplifier(PA)with bandpass filtering response is synthesized using a bandwidth-extended bandpass filter as the matching network(MN).In this structure,the bandwidth(θ_(C))is defined as a variable in the closedform equations provided by the microstrip bandpass filter.It can be extended over a wide range only by changing the characteristic impedances of the structure.Different from the other wideband MNs,the extension of bandwidth does not increase the complexity of the structure(order n is fixed).In addition,based on the bandwidth-extended structure,the wideband design of bandpass filtering PA is not limited to the fixed bandwidth of the specific filter structure.The theoretical analysis of the MN and the design flow of the PA are provided in this design.The fabricated bandpass filtering PA can support almost one-octave bandwidth(2-3.8 GHz),covering the two 5G bands(n41 and n78).The drain efficiency of 47%-60%and output power higher than 40 dBm are measured.Good frequency selectivity in S-parameter measurements can be observed.展开更多
To reduce additional mass, this work proposes a nonlinear energy sink(NES)with an inertial amplifier(NES-IA) to control the vertical vibration of the objects under harmonic and shock excitations. Moreover, this paper ...To reduce additional mass, this work proposes a nonlinear energy sink(NES)with an inertial amplifier(NES-IA) to control the vertical vibration of the objects under harmonic and shock excitations. Moreover, this paper constructs pure nonlinear stiffness without neglecting the gravity effect of the oscillator. Both analytical and numerical methods are used to evaluate the performance of the NES-IA. The research findings indicate that even if the actual mass is 1% of the main oscillator, the NES-IA with proper inertia angles and mass distribution ratios can still effectively attenuate the steady-state and transient responses of the main oscillator. Nonlinear stiffness and damping also have important effects. Due to strongly nonlinear factors, the coupled system may exhibit higher branch responses under harmonic excitation. In shock excitation environment, the NES-IA with a large dynamic mass can trigger energy capture of both main resonance and high-frequency resonance. Furthermore, the comparison with the traditional NES also confirms the advantages of the NES-IA in overcoming mass dependence.展开更多
We study the effect of an amplification mechanism in a nonlinear vibration energy harvesting system where a ferromagnetic beam resonator is attached to the vibration source through an additional linear spring with a d...We study the effect of an amplification mechanism in a nonlinear vibration energy harvesting system where a ferromagnetic beam resonator is attached to the vibration source through an additional linear spring with a damper.The beam moves in the nonlinear double-well potential caused by interaction with two magnets.The piezoelectric patches with electrodes attached to the electrical circuit support mechanical energy transduction into electrical power.The results show that the additional spring can improve energy harvesting.By changing its stiffness,we observed various solutions.At the point of the optimal stiffness of the additional spring,the power output is amplified a few times depending on the excitation amplitude.展开更多
A hybrid linear amplifier is inserted at the output of the source-in-the-middle distribution protocol to overcome the shortcomings of the transmission distance.The modified protocol aims to maintain a high key rate fo...A hybrid linear amplifier is inserted at the output of the source-in-the-middle distribution protocol to overcome the shortcomings of the transmission distance.The modified protocol aims to maintain a high key rate for long-distance transmission under high noise.It has the potential to significantly broaden the application range of the continuous variable quantum key distribution protocol.The effects of amplifier parameters and noise on the modified protocol are analyzed in detail with regard to applying it to a practical system.To make the simulation more realistic,the effect of finite size on the new protocol is taken into account.It will serve as a guideline for the future use of hybrid linear amplifiers.Different parameters can be adjusted to achieve the best performance for key rates of different quantum channels.展开更多
Impact of amplified spontaneous emission(ASE)noise on the stimulated Raman scattering(SRS)threshold of highpower fiber amplifiers is demonstrated numerically through a spectral evolution approach.The simulation result...Impact of amplified spontaneous emission(ASE)noise on the stimulated Raman scattering(SRS)threshold of highpower fiber amplifiers is demonstrated numerically through a spectral evolution approach.The simulation results confirm that ASE noise in the Raman wavelength band could reduce the SRS threshold of high-power fiber amplifiers significantly.As for ASE noise originated the main amplifier,it becomes stronger and reduces the SRS threshold at shorter operation wavelength below 1052 nm.As for ASE noise originated from the seed laser,it reduces the SRS threshold at different operation wavelength under the condition that the Raman ratio is over-90 dB in the seed laser.The theoretical method and results in this work could provide a well reference to extend the operation wavelength of high-power fiber lasers.展开更多
In view of the existing design challenges for Terahertz(THz)power amplifiers(PAs),the common design methods and the efforts of the State Key Laboratory of Millimeter Wave,Southeast University,China in the development ...In view of the existing design challenges for Terahertz(THz)power amplifiers(PAs),the common design methods and the efforts of the State Key Laboratory of Millimeter Wave,Southeast University,China in the development of silicon-based THz PAs,mainly including silicon-based PAs with operating frequencies covering 100–300 GHz,are summarized in this paper.Particularly,we design an LC-balun-based two-stage differential cascode PA with a center frequency of 150 GHz and an output power of 14 dBm.Based on a Marchand balun,we report a 220 GHz three-stage differential cascode PA with a saturated output power of 9.5 dBm.To further increase the output power of THz PA,based on a four-way differential power combining technique,we report a 211–263 GHz dual-LC-tank-based broadband PA with a recorded 14.7 dBm Psat and 16.4 dB peak gain.All the above circuits are designed in a standard 130 nm silicon germanium(SiGe)BiCMOS process.展开更多
A high efficiency compact Yb:KGW regenerative amplifier using an all-fiber laser seed source was comprehensively studied.With thermal lensing effect compensated by the cavity design,the compressed pulses with energy o...A high efficiency compact Yb:KGW regenerative amplifier using an all-fiber laser seed source was comprehensively studied.With thermal lensing effect compensated by the cavity design,the compressed pulses with energy of 1 mJ at 1 kHz and 0.4 mJ at 10 kHz in sub-400-fs pulse duration using chirped fiber Bragg grating(CFBG)stretcher were demonstrated.A modified Frantz-Nodvik equation was developed to emulate the dynamic behavior of the regenerative amplifier.The simulation results were in good agreement with the experiment.Numerical simulations and experimental results show that the scheme can be scalable to higher energy of multi-mJ,sub-300 fs pulses.展开更多
Tow different computer calculation methods for distortion of the wide-band diode bridge track and hold amplifier (THA) are presented based on a high frequency Schottky diode model. One of the computer programs calcula...Tow different computer calculation methods for distortion of the wide-band diode bridge track and hold amplifier (THA) are presented based on a high frequency Schottky diode model. One of the computer programs calculates the distortion of weekly nonlinear THA based on the KCL and the nonlinear-current method. The other calculates the weekly nonlinear distortion by using a Volterra series method and a nodal formulation. Comparative calculation results for the diode bridge THA have shown good agreement with these two computer program calculation methods, whereas the overall computational efficiency of the nonlinear-current method is better than that of the nodal formulation method in a special evaluation.展开更多
Efficient light generation and amplification has long been missing on the silicon platform due to its well-known indirect bandgap nature.Driven by the size,weight,power and cost(SWaP-C)requirements,the desire to fully...Efficient light generation and amplification has long been missing on the silicon platform due to its well-known indirect bandgap nature.Driven by the size,weight,power and cost(SWaP-C)requirements,the desire to fully realize integrated silicon electronic and photonic integrated circuits has greatly pushed the effort of realizing high performance on-chip lasers and amplifiers moving forward.Several approaches have been proposed and demonstrated to address this issue.In this paper,a brief overview of recent progress of the high-performance lasers and amplifiers on Si based on different technology is presented.Representative device demonstrations,including ultra-narrow linewidthⅢ-Ⅴ/Si lasers,fully integratedⅢ-Ⅴ/Si/Si3N4 lasers,high-channel count mode locked quantum dot(QD)lasers,and high gain QD amplifiers will be covered.展开更多
The problem of chatter vibration is associated with adverse consequences that often lead to tool impairment and poor surface finished in a workpiece, and thus, controlling or suppressing chatter vibrations is of great...The problem of chatter vibration is associated with adverse consequences that often lead to tool impairment and poor surface finished in a workpiece, and thus, controlling or suppressing chatter vibrations is of great significance to improve machining quality. In this paper, a workpiece and an actuator dynamics are considered in modeling and controller design. A proportional-integral controller(PI) is presented to control and actively damp the chatter vibration of a workpiece in the milling process. The controller is chosen on the basis of its highly stable output and a smaller amount of steady-state error. The controller is realized using analog operational amplifier circuit. The work has contributed to planning a novel approach that addresses the problem of chatter vibration in spite of technical hitches in modeling and controller design. The method can also lead to considerable reduction in vibrations and can be beneficial in industries in term of cost reduction and energy saving. The application of this method is verified using active damping device actuator(ADD) in the milling of steel.展开更多
We report a fabrication process and characterization of the Josephson parametric amplifier(JPA) for the single-shot quantum state measurement of superconducting multiqubit system. The device is prepared using Nb film ...We report a fabrication process and characterization of the Josephson parametric amplifier(JPA) for the single-shot quantum state measurement of superconducting multiqubit system. The device is prepared using Nb film as its base layer,which is convenient in the sample patterning process like e-beam lithography and film etching. Our results show that the JPA has a bandwidth up to 600 MHz with gain above 15 dB and noise temperature approaching the quantum limit. The qubit state differentiation measurements demonstrate the signal-to-noise ratio around 3 and the readout fidelity above 97%and 91% for the ground and first-excited states, respectively.展开更多
We report the passive phase locking of four high power Yb-doped fiber amplifiers with ring cavity.The interference patterns at different output power are observed and the Strehl ratios are measured.The maximum coheren...We report the passive phase locking of four high power Yb-doped fiber amplifiers with ring cavity.The interference patterns at different output power are observed and the Strehl ratios are measured.The maximum coherent output power of the fiber array is up to 1062 W by multi-stage amplification.The stable beam profiles of various phase relationships are observed by controlling the position of the feedback fiber,in good agreement with the calculated results.By using master oscillator power-amplifier(MOPA)architecture and broadband operation of passively phased systems,higher power scaling with high beam quality appears to be feasible.展开更多
Vibration energy harvesters(VEHs) can transform ambient vibration energy to electricity and have been widely investigated as promising self-powered devices for wireless sensor networks, wearable sensors, and applicati...Vibration energy harvesters(VEHs) can transform ambient vibration energy to electricity and have been widely investigated as promising self-powered devices for wireless sensor networks, wearable sensors, and applications of a micro-electro-mechanical system(MEMS). However, the ambient vibration is always too weak to hinder the high energy conversion efficiency. In this paper, the integrated frame composed of piezoelectric beams and mechanical amplifiers is proposed to improve the energy conversion efficiency of a VEH. First, the initial structures of a piezoelectric frame(PF) and an amplification frame(AF) are designed. The dynamic model is then established to analyze the influence of key structural parameters on the mechanical amplification factor. Finite element simulation is conducted to study the energy harvesting performance, where the stiffness characteristics and power output in the cases of series and parallel load resistance are discussed in detail. Furthermore, piezoelectric beams with variable cross-sections are introduced to optimize and improve the energy harvesting efficiency. Advantages of the PF with the AF are illustrated by comparison with conventional piezoelectric cantilever beams. The results show that the proposed integrated VEH has a good mechanical amplification capability and is more suitable for low-frequency vibration conditions.展开更多
This paper demonstrated a high power and high beam quality diode-pumped 1319-nm Nd:YAG master oscillatorpower amplifier laser system. A thermally near-unstable resonator with four-rod birefringence compensation flat-f...This paper demonstrated a high power and high beam quality diode-pumped 1319-nm Nd:YAG master oscillatorpower amplifier laser system. A thermally near-unstable resonator with four-rod birefringence compensation flat-flat cavity was adopted as the master oscillator. A solid etalon was inserted in the unidirectional ring resonator to compress the laser linewidth. Under a repetition rate of 500 Hz and pulse width of 160 μs, the master oscillator delivers an average output power of 16.8 W at 1319 nm with linear polarisation, beam quality factor M 2 = 1.16 and linewidth of 3.2 GHz. A double-pass power amplifier with two amplifier stages was employed for higher power scaling and the output power was amplified to be 25.9 W with M 2 = 1.43.展开更多
Present designs for molten salt thermal reactors require complex online processing systems, which are technologically challenging, while an accelerator-driven subcritical molten salt system can operate without an onli...Present designs for molten salt thermal reactors require complex online processing systems, which are technologically challenging, while an accelerator-driven subcritical molten salt system can operate without an online processing system, simplifying the design. Previous designs of accelerator-driven subcritical systems usually required very high-power proton accelerators(>10MW).In this research, a proton accelerator is used to drive a thorium-based molten salt fast energy amplifier(TMSFEA)that improves the neutron efficiency of the system. The research results show that TMSFEA can achieve a longterm stable state for more than 30 years with a rated power of 300 MW and a stabilizing effective multiplication factor(k(eff)) without any online processing. In this study, a physical design of an integrated molten salt energy amplifier with an initial energy gain of 117 was accomplished. According to the burn-up calculation, a molten salt energy amplifier with the rated power of 300 MW(th) should be able to operate continuously for nearly 40 years using a 1 Ge V proton beam below 4 m A during the lifetime. By the end of the life cycle, the energy gain can still reach 76,and^(233) U contributes 70.9% of the total fission rate, which indicates the efficient utilization of the thorium fuel.展开更多
We report on a compact, stable, all-fiberized narrow-linewidth(0.045 nm) pulsed laser source emitting laser beam with a wavelength of 266 nm, and tunable pulse width and repetition rate. The system is based on all-fib...We report on a compact, stable, all-fiberized narrow-linewidth(0.045 nm) pulsed laser source emitting laser beam with a wavelength of 266 nm, and tunable pulse width and repetition rate. The system is based on all-fiberized nanosecond amplifier architecture, which consists of Yb-doped fiber preamplifiers and a super-large-mode-area Yb-doped fiber power amplifier. The fiber amplifier with a core of 50 μm is used to raise the threshold of the stimulated Brillouin scattering(SBS) effect and to obtain high output power and single pulse energy. Using lithium triborate(LBO) crystal and betabarium borate(BBO) crystal for realizing the second-harmonic generation(SHG) and fourth-harmonic generation(FHG),we achieve 17 μJ(1.73 W) and 0.66 μJ(66 mW), respectively, at wavelengths of 532 nm and 266 nm and a repetition rate of 100 kHz with pulse width of 4 ns. This source has great potential applications in fluorescence research and solar-blind ultraviolet optical communication.展开更多
基金support from the Youth Innovation Promotion Association of Chinese Academy of Sciences (Grant No.2019319)support from the Start-up Foundation of Suzhou Institute of Nano-Tech and Nano-Bionics,CAS,Suzhou (Grant No.Y9AAD110)。
文摘A Josephson traveling wave parametric amplifier(JTWPA),which is a quantum-limited amplifier with high gain and large bandwidth,is the core device of large-scale measurement and control systems for quantum computing.A typical JTWPA consists of thousands of Josephson junctions connected in series to form a transmission line and hundreds of shunt LC resonators periodically loaded along the line for phase matching.Because the variation of these capacitors and inductors can be detrimental to their high-frequency characteristics,the fabrication of a JTWPA typically necessitates precise processing equipment.To guide the fabrication process and further improve the design for manufacturability,it is necessary to understand how each electronic component affects the amplifier.In this paper,we use the harmonic balance method to conduct a comprehensive study on the impact of nonuniformity and fabrication yield of the electronic components on the performance of a JTWPA.The results provide insightful and scientific guidance for device design and fabrication processes.
文摘For time-of-flight(TOF)light detection and ranging(LiDAR),a three-channel high-performance transimpedance amplifier(TIA)with high immunity to input load capacitance is presented.A regulated cascade(RGC)as the input stage is at the core of the complementary metal oxide semiconductor(CMOS)circuit chip,giving it more immunity to input photodiode detectors.A simple smart output interface acting as a feedback structure,which is rarely found in other designs,reduces the chip size and power consumption simultaneously.The circuit is designed using a 0.5μm CMOS process technology to achieve low cost.The device delivers a 33.87 dB?transimpedance gain at 350 MHz.With a higher input load capacitance,it shows a-3 dB bandwidth of 461 MHz,indicating a better detector tolerance at the front end of the system.Under a 3.3 V supply voltage,the device consumes 5.2 mW,and the total chip area with three channels is 402.8×597.0μm2(including the test pads).
基金Research General Direction funded this research at Universidad Santiago de Cali,Grant Number 01-2021 and APC was funded by 01-2021.
文摘Most modern microprocessors have one or two levels of on-chip caches to make things run faster,but this is not always the case.Most of the time,these caches are made of static random access memory cells.They take up a lot of space on the chip and use a lot of electricity.A lot of the time,low power is more important than several aspects.This is true for phones and tablets.Cache memory design for single bit architecture consists of six transistors static random access memory cell,a circuit of write driver,and sense amplifiers(such as voltage differential sense amplifier,current differential sense amplifier,charge transfer differential sense amplifier,voltage latch sense amplifier,and current latch sense amplifier,all of which are compared on different resistance values in terms of a number of transistors,delay in sensing and consumption of power.The conclusion arises that single bit six transistor static random access memory cell voltage differential sense amplifier architecture consumes 11.34μW of power which shows that power is reduced up to 83%,77.75%reduction in the case of the current differential sense amplifier,39.62%in case of charge transfer differential sense amplifier and 50%in case of voltage latch sense amplifier when compared to existing latch sense amplifier architecture.Furthermore,power reduction techniques are applied over different blocks of cache memory architecture to optimize energy.The single-bit six transistors static random access memory cell with forced tack technique and voltage differential sense amplifier with dual sleep technique consumes 8.078μW of power,i.e.,reduce 28%more power that makes single bit six transistor static random access memory cell with forced tack technique and voltage differential sense amplifier with dual sleep technique more energy efficient.
基金This work was partially supported by the National Key R&D Program of China(No.2022YFA1601903)the National Natural Science Foundation of China(Nos.11925502,11961141003,and 12175041)the Strategic Priority Research Program of the CAS(No.XDB34030000).
文摘Considering the R&D for upgrading the K^(0)_(L) andμdetectors in the Belle II experiment using a scintillator and silicon pho-tomultiplier(SiPM),we designed a compact high-speed and low-noise preamplifier.The preamplifier demonstrated a good gain stability,bandwidth of 426 MHz,baseline noise level ofσ≈0.6 mV,dynamic range of up to170 mV of the input signal amplitude,good time resolution of 20 ps,and it can be comprehensively applied to SiPMs.Adopting pole-zero-cancelation in the preamplifier reduces both the rise and fall times of the SiPM signal,which can significantly improve the time resolution and reduce the pile-up when using a large SiPM or an array of SiPMs.Various combinations of the preamplifier and several types of SiPMs demonstrated time resolutions better than 50 ps for most cases;when the number of detected photons was larger than 60,a time resolution of approximately 25 ps was achieved.
基金supported by National Natural Science Foundations of China (No.61971052 and No.U20A20203)Key Research and Development Project of Guangdong Province (2020B0101080001)
文摘In this paper,a 5G wideband power amplifier(PA)with bandpass filtering response is synthesized using a bandwidth-extended bandpass filter as the matching network(MN).In this structure,the bandwidth(θ_(C))is defined as a variable in the closedform equations provided by the microstrip bandpass filter.It can be extended over a wide range only by changing the characteristic impedances of the structure.Different from the other wideband MNs,the extension of bandwidth does not increase the complexity of the structure(order n is fixed).In addition,based on the bandwidth-extended structure,the wideband design of bandpass filtering PA is not limited to the fixed bandwidth of the specific filter structure.The theoretical analysis of the MN and the design flow of the PA are provided in this design.The fabricated bandpass filtering PA can support almost one-octave bandwidth(2-3.8 GHz),covering the two 5G bands(n41 and n78).The drain efficiency of 47%-60%and output power higher than 40 dBm are measured.Good frequency selectivity in S-parameter measurements can be observed.
基金Project supported by the National Natural Science Foundation of China (Nos. 12172014 and11972050)the Key Laboratory of Vibration and Control of Aero-Propulsion System (Northeastern University),Ministry of Education of China (No. VCAME 202004)。
文摘To reduce additional mass, this work proposes a nonlinear energy sink(NES)with an inertial amplifier(NES-IA) to control the vertical vibration of the objects under harmonic and shock excitations. Moreover, this paper constructs pure nonlinear stiffness without neglecting the gravity effect of the oscillator. Both analytical and numerical methods are used to evaluate the performance of the NES-IA. The research findings indicate that even if the actual mass is 1% of the main oscillator, the NES-IA with proper inertia angles and mass distribution ratios can still effectively attenuate the steady-state and transient responses of the main oscillator. Nonlinear stiffness and damping also have important effects. Due to strongly nonlinear factors, the coupled system may exhibit higher branch responses under harmonic excitation. In shock excitation environment, the NES-IA with a large dynamic mass can trigger energy capture of both main resonance and high-frequency resonance. Furthermore, the comparison with the traditional NES also confirms the advantages of the NES-IA in overcoming mass dependence.
基金funded by National Science Centre,Poland(Grant No.2021/40/Q/ST8/00362)Brazilian agencies:Coordena??o de Aperfei?oamento de Pessoal de Nível Superior(CAPES)+1 种基金Finance Code 001,Conselho Nacional de Desenvolvimento Científico e Tecnológico(Grant No.305476/2022-0)Funda?ao Carlos Chagas Filho de Am-paroáPesquisa do Estado do Rio de Janeiro(Grant Nos.210.167/2019,211.037/2019 and 201.294/2021)。
文摘We study the effect of an amplification mechanism in a nonlinear vibration energy harvesting system where a ferromagnetic beam resonator is attached to the vibration source through an additional linear spring with a damper.The beam moves in the nonlinear double-well potential caused by interaction with two magnets.The piezoelectric patches with electrodes attached to the electrical circuit support mechanical energy transduction into electrical power.The results show that the additional spring can improve energy harvesting.By changing its stiffness,we observed various solutions.At the point of the optimal stiffness of the additional spring,the power output is amplified a few times depending on the excitation amplitude.
基金Project supported by the National Natural Science Foundation of China(Grant No.62201620)the Outstanding Youth Program of Education Department of Hunan(Grant No.21B0228)+2 种基金Changsha Municipal Natural Science Foundation(Grant No.kq2202293)Hunan Students’Platform for innovation and entrepreneurship training program(Grant No.S202210538069)the Research Fund of Central South University of Forestry and Technology(Grant No.1121001703).
文摘A hybrid linear amplifier is inserted at the output of the source-in-the-middle distribution protocol to overcome the shortcomings of the transmission distance.The modified protocol aims to maintain a high key rate for long-distance transmission under high noise.It has the potential to significantly broaden the application range of the continuous variable quantum key distribution protocol.The effects of amplifier parameters and noise on the modified protocol are analyzed in detail with regard to applying it to a practical system.To make the simulation more realistic,the effect of finite size on the new protocol is taken into account.It will serve as a guideline for the future use of hybrid linear amplifiers.Different parameters can be adjusted to achieve the best performance for key rates of different quantum channels.
基金the National Natural Science Foundation of China(Grant Nos.62005313 and 62061136013).
文摘Impact of amplified spontaneous emission(ASE)noise on the stimulated Raman scattering(SRS)threshold of highpower fiber amplifiers is demonstrated numerically through a spectral evolution approach.The simulation results confirm that ASE noise in the Raman wavelength band could reduce the SRS threshold of high-power fiber amplifiers significantly.As for ASE noise originated the main amplifier,it becomes stronger and reduces the SRS threshold at shorter operation wavelength below 1052 nm.As for ASE noise originated from the seed laser,it reduces the SRS threshold at different operation wavelength under the condition that the Raman ratio is over-90 dB in the seed laser.The theoretical method and results in this work could provide a well reference to extend the operation wavelength of high-power fiber lasers.
基金supported in part by the National Natural Science Foundation of China under Grant Nos.62101117 and 62188102in part by ZTE Industry-University-Institute Cooperation Fundsin part by the Project funded by China Postdoctoral Science Foundation under Grant Nos.2021M700763 and 2022T150113.
文摘In view of the existing design challenges for Terahertz(THz)power amplifiers(PAs),the common design methods and the efforts of the State Key Laboratory of Millimeter Wave,Southeast University,China in the development of silicon-based THz PAs,mainly including silicon-based PAs with operating frequencies covering 100–300 GHz,are summarized in this paper.Particularly,we design an LC-balun-based two-stage differential cascode PA with a center frequency of 150 GHz and an output power of 14 dBm.Based on a Marchand balun,we report a 220 GHz three-stage differential cascode PA with a saturated output power of 9.5 dBm.To further increase the output power of THz PA,based on a four-way differential power combining technique,we report a 211–263 GHz dual-LC-tank-based broadband PA with a recorded 14.7 dBm Psat and 16.4 dB peak gain.All the above circuits are designed in a standard 130 nm silicon germanium(SiGe)BiCMOS process.
基金Project supported by Major Program of the National Natural Science Foundation of China (Grant No. 12034020)the National Natural Science Foundation of China (Grant No. 61805274)+1 种基金the National Key R&D Program of China (Grant No. 2018YFB1107201)the Synergic Extreme Condition User Facility
文摘A high efficiency compact Yb:KGW regenerative amplifier using an all-fiber laser seed source was comprehensively studied.With thermal lensing effect compensated by the cavity design,the compressed pulses with energy of 1 mJ at 1 kHz and 0.4 mJ at 10 kHz in sub-400-fs pulse duration using chirped fiber Bragg grating(CFBG)stretcher were demonstrated.A modified Frantz-Nodvik equation was developed to emulate the dynamic behavior of the regenerative amplifier.The simulation results were in good agreement with the experiment.Numerical simulations and experimental results show that the scheme can be scalable to higher energy of multi-mJ,sub-300 fs pulses.
文摘Tow different computer calculation methods for distortion of the wide-band diode bridge track and hold amplifier (THA) are presented based on a high frequency Schottky diode model. One of the computer programs calculates the distortion of weekly nonlinear THA based on the KCL and the nonlinear-current method. The other calculates the weekly nonlinear distortion by using a Volterra series method and a nodal formulation. Comparative calculation results for the diode bridge THA have shown good agreement with these two computer program calculation methods, whereas the overall computational efficiency of the nonlinear-current method is better than that of the nodal formulation method in a special evaluation.
文摘Efficient light generation and amplification has long been missing on the silicon platform due to its well-known indirect bandgap nature.Driven by the size,weight,power and cost(SWaP-C)requirements,the desire to fully realize integrated silicon electronic and photonic integrated circuits has greatly pushed the effort of realizing high performance on-chip lasers and amplifiers moving forward.Several approaches have been proposed and demonstrated to address this issue.In this paper,a brief overview of recent progress of the high-performance lasers and amplifiers on Si based on different technology is presented.Representative device demonstrations,including ultra-narrow linewidthⅢ-Ⅴ/Si lasers,fully integratedⅢ-Ⅴ/Si/Si3N4 lasers,high-channel count mode locked quantum dot(QD)lasers,and high gain QD amplifiers will be covered.
基金supported by National Natural Science Foundation of China(Grant No.51675440)Fundamental Research Funds for the Central Universities of China(Grant no.3102018gxc025)
文摘The problem of chatter vibration is associated with adverse consequences that often lead to tool impairment and poor surface finished in a workpiece, and thus, controlling or suppressing chatter vibrations is of great significance to improve machining quality. In this paper, a workpiece and an actuator dynamics are considered in modeling and controller design. A proportional-integral controller(PI) is presented to control and actively damp the chatter vibration of a workpiece in the milling process. The controller is chosen on the basis of its highly stable output and a smaller amount of steady-state error. The controller is realized using analog operational amplifier circuit. The work has contributed to planning a novel approach that addresses the problem of chatter vibration in spite of technical hitches in modeling and controller design. The method can also lead to considerable reduction in vibrations and can be beneficial in industries in term of cost reduction and energy saving. The application of this method is verified using active damping device actuator(ADD) in the milling of steel.
基金Project supported by the Science Funds from the Ministry of Science and Technology of China(Grant Nos.2015CB921104 and 2016YFA0300601)the National Natural Science Foundation of China(Grant Nos.11674380 and 11874063)+1 种基金the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant Nos.XDB07010300 and XDB28000000)the Key Research and Development Program of Guangdong Province,China(Grant No.2018B030326001)
文摘We report a fabrication process and characterization of the Josephson parametric amplifier(JPA) for the single-shot quantum state measurement of superconducting multiqubit system. The device is prepared using Nb film as its base layer,which is convenient in the sample patterning process like e-beam lithography and film etching. Our results show that the JPA has a bandwidth up to 600 MHz with gain above 15 dB and noise temperature approaching the quantum limit. The qubit state differentiation measurements demonstrate the signal-to-noise ratio around 3 and the readout fidelity above 97%and 91% for the ground and first-excited states, respectively.
基金Supported by the National Natural Science Foundation of China under Grant Nos 60908011 and 60907045the National High Technology Research and Development Program of China under Grant No 2008AA03Z405the National Science and Technology Major Project of China under Grant No 2010ZX04013 and the Shanghai“Phosphor”Science Foundation under Grant No 09QB1401700.
文摘We report the passive phase locking of four high power Yb-doped fiber amplifiers with ring cavity.The interference patterns at different output power are observed and the Strehl ratios are measured.The maximum coherent output power of the fiber array is up to 1062 W by multi-stage amplification.The stable beam profiles of various phase relationships are observed by controlling the position of the feedback fiber,in good agreement with the calculated results.By using master oscillator power-amplifier(MOPA)architecture and broadband operation of passively phased systems,higher power scaling with high beam quality appears to be feasible.
基金Project supported by the National Natural Science Foundation of China (Nos. 11972051 and11672008)the Opening Project Foundation of the State Key Laboratory of Mechanical Behavior and System Safety of Traffic Engineering Structures (No. KF-2020-11)。
文摘Vibration energy harvesters(VEHs) can transform ambient vibration energy to electricity and have been widely investigated as promising self-powered devices for wireless sensor networks, wearable sensors, and applications of a micro-electro-mechanical system(MEMS). However, the ambient vibration is always too weak to hinder the high energy conversion efficiency. In this paper, the integrated frame composed of piezoelectric beams and mechanical amplifiers is proposed to improve the energy conversion efficiency of a VEH. First, the initial structures of a piezoelectric frame(PF) and an amplification frame(AF) are designed. The dynamic model is then established to analyze the influence of key structural parameters on the mechanical amplification factor. Finite element simulation is conducted to study the energy harvesting performance, where the stiffness characteristics and power output in the cases of series and parallel load resistance are discussed in detail. Furthermore, piezoelectric beams with variable cross-sections are introduced to optimize and improve the energy harvesting efficiency. Advantages of the PF with the AF are illustrated by comparison with conventional piezoelectric cantilever beams. The results show that the proposed integrated VEH has a good mechanical amplification capability and is more suitable for low-frequency vibration conditions.
基金Project supported by the National High Technology Research and Development Program and the National Natural Science Foundation of China (Grant No. 60508013)
文摘This paper demonstrated a high power and high beam quality diode-pumped 1319-nm Nd:YAG master oscillatorpower amplifier laser system. A thermally near-unstable resonator with four-rod birefringence compensation flat-flat cavity was adopted as the master oscillator. A solid etalon was inserted in the unidirectional ring resonator to compress the laser linewidth. Under a repetition rate of 500 Hz and pulse width of 160 μs, the master oscillator delivers an average output power of 16.8 W at 1319 nm with linear polarisation, beam quality factor M 2 = 1.16 and linewidth of 3.2 GHz. A double-pass power amplifier with two amplifier stages was employed for higher power scaling and the output power was amplified to be 25.9 W with M 2 = 1.43.
基金This work was supported by the Chinese TMSR Strategic Pioneer Science and Technology Project(No.XDA02010000)the Frontier Science Key Program of the Chinese Academy of Sciences(No.QYZDY-SSW-JSC016).
文摘Present designs for molten salt thermal reactors require complex online processing systems, which are technologically challenging, while an accelerator-driven subcritical molten salt system can operate without an online processing system, simplifying the design. Previous designs of accelerator-driven subcritical systems usually required very high-power proton accelerators(>10MW).In this research, a proton accelerator is used to drive a thorium-based molten salt fast energy amplifier(TMSFEA)that improves the neutron efficiency of the system. The research results show that TMSFEA can achieve a longterm stable state for more than 30 years with a rated power of 300 MW and a stabilizing effective multiplication factor(k(eff)) without any online processing. In this study, a physical design of an integrated molten salt energy amplifier with an initial energy gain of 117 was accomplished. According to the burn-up calculation, a molten salt energy amplifier with the rated power of 300 MW(th) should be able to operate continuously for nearly 40 years using a 1 Ge V proton beam below 4 m A during the lifetime. By the end of the life cycle, the energy gain can still reach 76,and^(233) U contributes 70.9% of the total fission rate, which indicates the efficient utilization of the thorium fuel.
基金Project supported by the Key Program of Beijing Municipal Natural Science Foundation, China (Grant No. KZ201910005006)the National Nature Science Foundation of China (Grant No. 62005004)+1 种基金the Natural Science Foundation of Beijing Municipality, China (Grant No. 4204091)the National Science Foundation for Postdoctor Scientists of China (Grant No. 212423)。
文摘We report on a compact, stable, all-fiberized narrow-linewidth(0.045 nm) pulsed laser source emitting laser beam with a wavelength of 266 nm, and tunable pulse width and repetition rate. The system is based on all-fiberized nanosecond amplifier architecture, which consists of Yb-doped fiber preamplifiers and a super-large-mode-area Yb-doped fiber power amplifier. The fiber amplifier with a core of 50 μm is used to raise the threshold of the stimulated Brillouin scattering(SBS) effect and to obtain high output power and single pulse energy. Using lithium triborate(LBO) crystal and betabarium borate(BBO) crystal for realizing the second-harmonic generation(SHG) and fourth-harmonic generation(FHG),we achieve 17 μJ(1.73 W) and 0.66 μJ(66 mW), respectively, at wavelengths of 532 nm and 266 nm and a repetition rate of 100 kHz with pulse width of 4 ns. This source has great potential applications in fluorescence research and solar-blind ultraviolet optical communication.
