Experiments were conducted to evaluate the physiological and the biochemical characteristics of waxy wheat seeds under accelerated aging conditions. Five waxy wheat lines, which were Waxy 1, Waxy 4, Waxy 8, Waxy 9, an...Experiments were conducted to evaluate the physiological and the biochemical characteristics of waxy wheat seeds under accelerated aging conditions. Five waxy wheat lines, which were Waxy 1, Waxy 4, Waxy 8, Waxy 9, and Waxy 15; and five non-waxy wheat lines： S-39, 04J89, Jan-81, III42-4, and II110 were studied. The seeds were subjected to accelerated aging at 40℃, 45℃, 50℃, 55℃, and 60℃, and 90% relative humidity for 0, 2, 4, 6, and 8 days, respectively. The results showed a gradual increase in conductivity and decrease in germination rate during accelerated aging. SOD, POD and CAT activities increased at lowgrade treatment, but decreased at severe treatment. On the other hand, the soluble protein content decreased at 45 ℃, but successively increased, then decreased 50℃. From the above study, it showed that 90% RH at 55℃ was the best accelerated aging condition for optimum efficiency in a shorter period.展开更多
To understand the aging effects on detonation performances of explosives,an accelerated aging mechanism and effect of explosives were analyzed.Based on the thermo-gravimetric(TG) curves of explosives under the heat ra...To understand the aging effects on detonation performances of explosives,an accelerated aging mechanism and effect of explosives were analyzed.Based on the thermo-gravimetric(TG) curves of explosives under the heat rate of 5,10 and 20 K·min-1,the thermal decomposition activation energy,pre-exponential factor,mechanism function and kinetic equation of the explosives were calculated by Ozawa's equation and decomposition extents.Then,according to the derived kinetic equation,the density,composition and heat of formation of GI-1,PBX-1 and PBX-2 explosive in different decomposition extents were calculated at accelerated aging temperatures of 70 ℃ and 75 ℃,respectively.Furthermore,the detonation parameters of GI-1,PBX-1 and PBX-2 explosives were found out by means of VLWR code.The results show that after accelerated aging,the density are decrease,the detonation velocity and pressure are all decreased slightly.展开更多
To acquire a rational minimum cut-off time and the precision of lifetime prediction with respect to cut-off time for the accelerated aging test of LED lamps, fifth-order moving average error estimation is adopted in t...To acquire a rational minimum cut-off time and the precision of lifetime prediction with respect to cut-off time for the accelerated aging test of LED lamps, fifth-order moving average error estimation is adopted in this paper. Eighteen LED lamps from the same batch are selected for two accelerated aging tests, with 10 samples at 80 ℃ and eight samples at 85 ℃. First, the accelerated lifetime of each lamp is acquired by exponential fitting of the lumen maintenances of the lamp for a certain cut-offtime With the acquired lifetimes of all lamps, the two-parameter Weibull distribution of the failure probability is obtained, and the medium lifetime is calculated. Then, the precision of the medium lifetime prediction for different cut-off times is obtained by moving average error estimation. It is shown that there exists a minimum cut-off time for the accelerated aging test, which can be determined by the variation of the moving average error versus the cut-offtime. When the cut-off time is less than this value, the lifetime estimation is irrational. For a given cut-off time, the precision of lifetime prediction can be computed by average error evaluation, and the error of lifetime estimation decreases gradually as the cut-off time- increases. The minimum cut-off time and medium lifetime of LED lamps are both sensitive to thermal stress. The minimum cut-off time is 1104 h with the lifetime esti- mation error of 1.15% for the test at 80 ~C, and 936 h with the lifetime estimation error of 1.24% for the test at 85 ℃. With the lifetime estimation error of about 0.46%, the median lifetimes are 7310 h and 4598 h for the tests at 80 ℃ and 85℃, respectively.展开更多
The degradation of crosslinked polyethylene (XLPE) cable insulation during service, such as thermo-oxidation and water treeing may lead to a premature electrical breakdown of the XLPE insulation cables. Therefore, it ...The degradation of crosslinked polyethylene (XLPE) cable insulation during service, such as thermo-oxidation and water treeing may lead to a premature electrical breakdown of the XLPE insulation cables. Therefore, it is necessary to optimize the period of replacement to evenly distribute the replacement cost by ascertaining the deterioration degree. Estimation of the aging degree is at present the most important task for diagnosis of the residual lifetime of the power cable insulation. This paper presents a study on the changes in the dielectric properties of the thermally aged XLPE cables in the frequency range from 0.07～10 MHz. Based on electrical and physicochemical characterization, some new "dactylograms" for the thermally aged XLPE cable insulation have been proposed.展开更多
Calcined ginger nuts admixed by fly ash and quartz sand (CGN-(F+S)) has been validated to be basically compatible to earthen sites as an anchor grout. Accelerated ageing tests including water stability test, temperatu...Calcined ginger nuts admixed by fly ash and quartz sand (CGN-(F+S)) has been validated to be basically compatible to earthen sites as an anchor grout. Accelerated ageing tests including water stability test, temperature and humidity cycling test, soundness test and alkali resistance test are conducted with the objective to further research the property changes of CGN-(F+S) grout. Density, surface hardness, water penetration capacity, water permeability capacity, soluble salt, scanning electron microscopy (SEM) images and energy dispersive spectrometry (EDS) spectrum of these samples have been tested after accelerated ageing tests. The results show that densities of samples decrease, surface hardness, water penetration capacity and water permeability capacity of samples increase generally. Besides, soluble salt analysis, SEM and EDS results well corroborate the changes. Based on the results it can be concluded that property changes are most serious after temperature and humidity cycling test, followed by water stability, soundness and alkali resistance test in sequence. But in general, CGN-(F+S) still has good durability.展开更多
The variation of the dielectric constant e' and the dielectric loss e' of polyesteramide, alkyd polyesteramide and alkyd varnish dry films were measured within the frequency range from 105 to 107 Hz and the te...The variation of the dielectric constant e' and the dielectric loss e' of polyesteramide, alkyd polyesteramide and alkyd varnish dry films were measured within the frequency range from 105 to 107 Hz and the temperature range from 20 to 50℃. The varnish films were subjected to accelerated ageing by heating at 110℃ for diferent durations. The efect of the accelerated ageing on e' and e' were measured. The activation energy and the entropy change of dielectric relaxation for the dry films before and after ageing were also calculated. All the results obtained were recorded and discussed in correlation with the molecular structure of the investigated varnishes.展开更多
With the purpose of investigating the effects of confining pressure and aging on the mechanical properties of Hydroxyl-terminated polybutadiene(HTPB)based composite solid propellant,tensile tests of thermal accelerate...With the purpose of investigating the effects of confining pressure and aging on the mechanical properties of Hydroxyl-terminated polybutadiene(HTPB)based composite solid propellant,tensile tests of thermal accelerated aged propellant samples under room temperature and different confining pressure conditions were performed through the use of a self-made confining pressure device and conventional testing machine.Afterwards,the maximum tensile stressσmand the corresponding strainεm for the propellant under different test conditions were obtained and analyzed.The results indicate that confining pressure and aging can significantly affect the mechanical properties of HTPB propellant,and the coupled effects are very complex.On the one hand,the stressσmincreases as a whole when confining pressure becomes higher or thermal aging time rises.Besides,this stress is more sensitive to aging with increasing confining pressure.There are almost three regions in the stress increments(σm P-σm0)/σm0and thermal aging time curves for HTPB propellant.The maximum value of the stress increment(σm P-σm0)/σm0for the propellant is about 98%at 7.0 MPa and 170 d.On the other hand,the strainεm decreases with increasing thermal aging time under the whole confining pressure conditions.However,the variation of this strain with confining pressure is more complex at various thermal aging time,which is different from that of unaged solid propellant in previous researches.In addition,this strain is slightly less sensitive to aging as the confining pressure increases.Furthermore,there is also a critical confining pressure in this investigation,whose value is between 0.15 MPa and 4.0 MPa.Beyond this critical pressure,the trends of the stressσmand the corresponding strainεm all change.Moreover,there are some critical thermal aging time for the stress increment(σm P-σm0)/σm0and strain increment(εm P-εm0)/εm0of HTPB propellant in this investigation,which are about at 35,50 and 170 d.Finally,based on the twin-shear strength theory,a new modified nonlinear strength criterion of thermal aged HTPB propellant under confining pressure was proposed.And the whole errors of fitted results are lower than 6%.Therefore,the proposed strength criterion can be selected as a failure criterion for the analysis the failure properties of aged HTPB propellant under different confining pressures,the structural integrity of solid propellant grain and the safety of solid rocket motor during ignition operation after long periods of storage.展开更多
This paper presents an experimental investigation to identify suitable indices to assess durability of glulam when subjected to freeze-thaw cycles in an exposed enviroenment.In this study,two types of glulam specimens...This paper presents an experimental investigation to identify suitable indices to assess durability of glulam when subjected to freeze-thaw cycles in an exposed enviroenment.In this study,two types of glulam specimens were tested for their performance when subjected to different levels of aging due to freezing and thawing.Effect of aging treatment on various parameters including thickness swelling rate,static bending strength,elastic modulus,shear strength,and peeling rate of adhesive layer were studied.Obtained results showed that freeze-thaw aging treatment did not affect the water-resistance of the specimens as measured by thickness swelling rate and had little effect on the dimensional stability of the material.However,the applied aging treatment weakened the bending resistance of the glulam specimens with more pronounced effects on on low-density wood.On the other hand,bond strength of high-density wood was relatively more affected due to the appliedfreeze-thaw cycles.For highdensity wood,it is suggested that the shear strength of the adhesive layer be taken as an important index to determine the durability of freeze-thaw cycles aging.For low-density wood,on the other hand,the static bending strength can be used as an index to determine the durability of glulam under freeze-thaw cycles aging.展开更多
A method of estimating the safe storage life （τ）, self-accelerating decomposition temperature （TsADT） and critical temperature of thermal explosion （Tb） of double-base propellant using isothermal and non-isothe...A method of estimating the safe storage life （τ）, self-accelerating decomposition temperature （TsADT） and critical temperature of thermal explosion （Tb） of double-base propellant using isothermal and non-isothermal decomposition behaviours is presented. For double-base propellant composed of 56±1wt% of nitrocellulose （NC）, 27±0.5wt% of nitroglycerine （NG）, 8.15±0.15wt% of dinitrotoluene （DNT）, 2.5±0.1wt% of methyl centralite, 5.0±0.15wt% of catalyst and 1.0±0.1wt% of other, the values of r of 49.4 years at 40℃, of TSAOT of 151.35℃ and of Tb of 163.01℃ were obtained.展开更多
This paper studies the effects of hygrothermal environment at different temperatures and ultraviolet(UV)radiation on the bending properties of epoxy polymer mortar(EPM).The microstructure changes of EPM during aging w...This paper studies the effects of hygrothermal environment at different temperatures and ultraviolet(UV)radiation on the bending properties of epoxy polymer mortar(EPM).The microstructure changes of EPM during aging were studied by scanning electron microscopy,and the bending properties of EPM were predicted by the Arrhenius law.The results showed that the bending properties of EPM were greatly affected by the temperature in the hygrothermal aging,but not evidently affected by ultraviolet radiation in UV aging.The prediction of Arrhenius model shows that the EPM will steadily retain 92.8%,89.1%and 79.4%of the original flexural strength after long-term hygrothermal aging at 40∘C,60∘C and 80∘C,respectively.展开更多
The objective of this work is to demonstrate how the viscoelastic, thermal, rheological, hardness, wear resistance and fracture behavior of bioinert high-density polyethylene （HDPE） can be changed by the addition of...The objective of this work is to demonstrate how the viscoelastic, thermal, rheological, hardness, wear resistance and fracture behavior of bioinert high-density polyethylene （HDPE） can be changed by the addition of hydroxyapatite （HAP） nano particles. Also the effects of accelerated thermal ageing on the composite properties have been investigated. Different weight fractions of HAP nano particles up to 30 wt% have been incorporated in HDPE matrix by using melt blending in co-rotating intermeshing twin screw extruder. The fracture toughness results showed a remarkable decrease in proportion to the HAP content. The differential scanning calorimetry results indicated that the melting temperature and crystallinity were affected by the addition of HAP nano particles into the matrix. The complex viscosity increased as the percentage of HAP increased due to the restriction of the molecular mobility. The dynamic mechanical analysis results revealed that higher storage modulus （8.3 1011 Pa） could be obtained in the developed HDPE/HAP in 30 wt% compared to neat HDPE （5.1 1011 Pa）. Finally, the hardness and wear resistance of HDPE were improved significantly due to the addition of HAP nano particles. The changes in the HDPE and its nano composite properties due to ageing showed that the HDPE and its nano composites crystallinity increased while the fracture toughness, hardness, wear resistance, storage and loss modulus decreased.展开更多
In this paper,six different types of silicone rubberbased composites were investigated for applications in high voltage insulation through multi-stress accelerated aging conducted for a period of 5000 h both under AC ...In this paper,six different types of silicone rubberbased composites were investigated for applications in high voltage insulation through multi-stress accelerated aging conducted for a period of 5000 h both under AC and DC voltages.The main goal of this study was lifetime prediction of HTV-SR based composites at a typical multi-stress aging conditions.Several diagnostic techniques such as hydrophobicity assessment,leakage current measurement and FTIR were incorporated to assess the aging.As an outcome of this investigation,all the five hybrid samples were found as quite resistant to aging while the neat sample was comparatively,less resistant to the aging.Overall,among the studied samples,TS2 and TS4 appeared to have shown the highest resistance to aging giving a service life of 43.2 and 42 years,respectively under AC aging.Under DC stress the order of merit of investigated samples was identical to that of AC stress but having marginally less life spans.展开更多
FF sample(nearly free ofδ-ferrite)and CF sample(containing∼4%δ-ferrite)were prepared from the AISI 316 austenitic stainless steel plate to elucidate the role ofδ-ferrite in the fatigue crack growth under the solut...FF sample(nearly free ofδ-ferrite)and CF sample(containing∼4%δ-ferrite)were prepared from the AISI 316 austenitic stainless steel plate to elucidate the role ofδ-ferrite in the fatigue crack growth under the solution treated and accelerated aged conditions.It is found that the fatigue crack growth resistance of the CF sample is higher than the FF sample under the solution treated condition.However,a significant deterioration of the fatigue crack growth resistance is observed in the CF sample while little variation is found in the FF sample after accelerated aging treatment at 750°C for 10 h.In the solution treated condition,deflected crack growth path is present when the main crack encounters theδ-ferrite in the CF sample due to the differences in the fatigue responses between austenite andδ-ferrite.The measured growth rate of the deflected crack is significantly slower than that of the flat crack of the same length.After the accelerated aging treatment,microcracks are produced at the M_(23)C_(6)/δinterface due to the strain incompatibility between M_(23)C_(6) and retainedδ-ferrite when the decomposedδ-ferrite is subject to plastic deformation in the crack tip plastic zone.The preexisting microcracks in the front of crack tip provide a viable path for crack propagation,resulting in the relatively flat crack path.展开更多
Protection of silver mirror stacks from environmental degradation before launching is crucial for space applications.Hereby,we report a comparative study of the advanced protection of silver mirror stacks for space te...Protection of silver mirror stacks from environmental degradation before launching is crucial for space applications.Hereby,we report a comparative study of the advanced protection of silver mirror stacks for space telescopes provided by SiO_(2)and Al_(2)O_(3)coatings in conditions of accelerated aging by sulfida-tion.The model silver stack samples were deposited by cathodic magnetron sputtering on a reference silica substrate for optical applications and a surface-pretreated SiC substrate.Accelerated aging was per-formed in dry and more severe wet conditions.Optical micrographic observations,surface and interface analysis by Time-of Flight Secondary Ion Mass Spectrometry(ToF-SIMS)and reflectivity measurements were combined to comparatively study the effects of degradation.The results show a lower kinetics of degradation by accelerated aging of the stacks protected by the alumina coating in comparable test conditions.展开更多
Studies of ultra-drying and accelerated aging on Hippophae rhamnoides seeds from the arid and semiarid areas of northwest China were conducted. The results showed that H. rhamnoides seeds had higher desiccation endura...Studies of ultra-drying and accelerated aging on Hippophae rhamnoides seeds from the arid and semiarid areas of northwest China were conducted. The results showed that H. rhamnoides seeds had higher desiccation endurance. When seeds were desiccated to 26 g/kg, their germination percentage, vigor indices and enzyme activity could be retained. After 30-day accelerated aging, ultra-dried seeds had better anti-aging ability and storability compared to natural dried seeds, and the best choice for the MC of seed was 34 g/kg. Accordingly, ultra-drying treatment could improve the storability.展开更多
Based on Wiener process model, a new approach for reliability evaluation of cross-linked polyethylene(XLPE) is proposed to improve the lifetime evaluation reliability of XLPE under multi-stressing conditions and study...Based on Wiener process model, a new approach for reliability evaluation of cross-linked polyethylene(XLPE) is proposed to improve the lifetime evaluation reliability of XLPE under multi-stressing conditions and study the failure probability distribution. In this paper, two accelerated aging tests are carried out under combined thermal and vibration conditions. The volume resistance degradation data of XLPE samples are tested with a24 h interval under the accelerated stressing conditions at(130℃, 12 m/s^2) and(150℃, 8.5 m/s^2), respectively.Nonlinear degradation data obtained from the experiment are transformed to linear intermediate-variable values using time scaling function, and then linearized degradation data are calculated and evaluated on the basis of linear Wiener process model. Considering traditional Arrhenius equation and inverse power criterion, parameters of the linear Wiener model are estimated according to the maximum likelihood function. The relationship curves on probability density and reliability are given, and the lifetime distribution of XLPE under different stressing conditions is also obtained for evaluating the reliability of XLPE insulation. Finally, the life expectancy of XLPE is 17.9 a under an allowance temperature of 90℃ and an actual vibration acceleration of 0.5 m/s^2. The approach and results in this paper may be used for reliability assessment of high-voltage multiple samples or apparatuses.展开更多
基金Supported by National Natural Science Foundation of China (31000712)National Natural Science Fund (31000712)Yunnan Provincial Education Department Scientific Research Program (08Y0166)
文摘Experiments were conducted to evaluate the physiological and the biochemical characteristics of waxy wheat seeds under accelerated aging conditions. Five waxy wheat lines, which were Waxy 1, Waxy 4, Waxy 8, Waxy 9, and Waxy 15; and five non-waxy wheat lines： S-39, 04J89, Jan-81, III42-4, and II110 were studied. The seeds were subjected to accelerated aging at 40℃, 45℃, 50℃, 55℃, and 60℃, and 90% relative humidity for 0, 2, 4, 6, and 8 days, respectively. The results showed a gradual increase in conductivity and decrease in germination rate during accelerated aging. SOD, POD and CAT activities increased at lowgrade treatment, but decreased at severe treatment. On the other hand, the soluble protein content decreased at 45 ℃, but successively increased, then decreased 50℃. From the above study, it showed that 90% RH at 55℃ was the best accelerated aging condition for optimum efficiency in a shorter period.
文摘To understand the aging effects on detonation performances of explosives,an accelerated aging mechanism and effect of explosives were analyzed.Based on the thermo-gravimetric(TG) curves of explosives under the heat rate of 5,10 and 20 K·min-1,the thermal decomposition activation energy,pre-exponential factor,mechanism function and kinetic equation of the explosives were calculated by Ozawa's equation and decomposition extents.Then,according to the derived kinetic equation,the density,composition and heat of formation of GI-1,PBX-1 and PBX-2 explosive in different decomposition extents were calculated at accelerated aging temperatures of 70 ℃ and 75 ℃,respectively.Furthermore,the detonation parameters of GI-1,PBX-1 and PBX-2 explosives were found out by means of VLWR code.The results show that after accelerated aging,the density are decrease,the detonation velocity and pressure are all decreased slightly.
基金supported by the National High-Tech R&D Program(863)of China(Nos.2015AA03A101 and 2013AA03A116)the Cui Can Project of Chinese Academy of Sciences(No.KZCC-EW-102)
文摘To acquire a rational minimum cut-off time and the precision of lifetime prediction with respect to cut-off time for the accelerated aging test of LED lamps, fifth-order moving average error estimation is adopted in this paper. Eighteen LED lamps from the same batch are selected for two accelerated aging tests, with 10 samples at 80 ℃ and eight samples at 85 ℃. First, the accelerated lifetime of each lamp is acquired by exponential fitting of the lumen maintenances of the lamp for a certain cut-offtime With the acquired lifetimes of all lamps, the two-parameter Weibull distribution of the failure probability is obtained, and the medium lifetime is calculated. Then, the precision of the medium lifetime prediction for different cut-off times is obtained by moving average error estimation. It is shown that there exists a minimum cut-off time for the accelerated aging test, which can be determined by the variation of the moving average error versus the cut-offtime. When the cut-off time is less than this value, the lifetime estimation is irrational. For a given cut-off time, the precision of lifetime prediction can be computed by average error evaluation, and the error of lifetime estimation decreases gradually as the cut-off time- increases. The minimum cut-off time and medium lifetime of LED lamps are both sensitive to thermal stress. The minimum cut-off time is 1104 h with the lifetime esti- mation error of 1.15% for the test at 80 ~C, and 936 h with the lifetime estimation error of 1.24% for the test at 85 ℃. With the lifetime estimation error of about 0.46%, the median lifetimes are 7310 h and 4598 h for the tests at 80 ℃ and 85℃, respectively.
基金Major Research Project of Shanghai City(No. 045211024)
文摘The degradation of crosslinked polyethylene (XLPE) cable insulation during service, such as thermo-oxidation and water treeing may lead to a premature electrical breakdown of the XLPE insulation cables. Therefore, it is necessary to optimize the period of replacement to evenly distribute the replacement cost by ascertaining the deterioration degree. Estimation of the aging degree is at present the most important task for diagnosis of the residual lifetime of the power cable insulation. This paper presents a study on the changes in the dielectric properties of the thermally aged XLPE cables in the frequency range from 0.07～10 MHz. Based on electrical and physicochemical characterization, some new "dactylograms" for the thermally aged XLPE cable insulation have been proposed.
基金Project(51578272)supported by the National Natural Science Foundation of China
文摘Calcined ginger nuts admixed by fly ash and quartz sand (CGN-(F+S)) has been validated to be basically compatible to earthen sites as an anchor grout. Accelerated ageing tests including water stability test, temperature and humidity cycling test, soundness test and alkali resistance test are conducted with the objective to further research the property changes of CGN-(F+S) grout. Density, surface hardness, water penetration capacity, water permeability capacity, soluble salt, scanning electron microscopy (SEM) images and energy dispersive spectrometry (EDS) spectrum of these samples have been tested after accelerated ageing tests. The results show that densities of samples decrease, surface hardness, water penetration capacity and water permeability capacity of samples increase generally. Besides, soluble salt analysis, SEM and EDS results well corroborate the changes. Based on the results it can be concluded that property changes are most serious after temperature and humidity cycling test, followed by water stability, soundness and alkali resistance test in sequence. But in general, CGN-(F+S) still has good durability.
文摘The variation of the dielectric constant e' and the dielectric loss e' of polyesteramide, alkyd polyesteramide and alkyd varnish dry films were measured within the frequency range from 105 to 107 Hz and the temperature range from 20 to 50℃. The varnish films were subjected to accelerated ageing by heating at 110℃ for diferent durations. The efect of the accelerated ageing on e' and e' were measured. The activation energy and the entropy change of dielectric relaxation for the dry films before and after ageing were also calculated. All the results obtained were recorded and discussed in correlation with the molecular structure of the investigated varnishes.
基金the financial support of the National Natural Funds in China(No.11772352)the Science project of Shaanxi Province(Nos.20190504 and 2019SZS-09)。
文摘With the purpose of investigating the effects of confining pressure and aging on the mechanical properties of Hydroxyl-terminated polybutadiene(HTPB)based composite solid propellant,tensile tests of thermal accelerated aged propellant samples under room temperature and different confining pressure conditions were performed through the use of a self-made confining pressure device and conventional testing machine.Afterwards,the maximum tensile stressσmand the corresponding strainεm for the propellant under different test conditions were obtained and analyzed.The results indicate that confining pressure and aging can significantly affect the mechanical properties of HTPB propellant,and the coupled effects are very complex.On the one hand,the stressσmincreases as a whole when confining pressure becomes higher or thermal aging time rises.Besides,this stress is more sensitive to aging with increasing confining pressure.There are almost three regions in the stress increments(σm P-σm0)/σm0and thermal aging time curves for HTPB propellant.The maximum value of the stress increment(σm P-σm0)/σm0for the propellant is about 98%at 7.0 MPa and 170 d.On the other hand,the strainεm decreases with increasing thermal aging time under the whole confining pressure conditions.However,the variation of this strain with confining pressure is more complex at various thermal aging time,which is different from that of unaged solid propellant in previous researches.In addition,this strain is slightly less sensitive to aging as the confining pressure increases.Furthermore,there is also a critical confining pressure in this investigation,whose value is between 0.15 MPa and 4.0 MPa.Beyond this critical pressure,the trends of the stressσmand the corresponding strainεm all change.Moreover,there are some critical thermal aging time for the stress increment(σm P-σm0)/σm0and strain increment(εm P-εm0)/εm0of HTPB propellant in this investigation,which are about at 35,50 and 170 d.Finally,based on the twin-shear strength theory,a new modified nonlinear strength criterion of thermal aged HTPB propellant under confining pressure was proposed.And the whole errors of fitted results are lower than 6%.Therefore,the proposed strength criterion can be selected as a failure criterion for the analysis the failure properties of aged HTPB propellant under different confining pressures,the structural integrity of solid propellant grain and the safety of solid rocket motor during ignition operation after long periods of storage.
基金the Natural Science Foundation of Jiang-su Province(Grant No.BK20181402)the National Natural Science Foundation of China(Grant No.51878354)+1 种基金a Project Funded by the National First-class Disciplines(PNFD),a Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)a Project Funded by the Co-Innovation Center of Efficient Processing and Utilization of Forest Resources,Nanjing Forestry University(Nanjing,China).
文摘This paper presents an experimental investigation to identify suitable indices to assess durability of glulam when subjected to freeze-thaw cycles in an exposed enviroenment.In this study,two types of glulam specimens were tested for their performance when subjected to different levels of aging due to freezing and thawing.Effect of aging treatment on various parameters including thickness swelling rate,static bending strength,elastic modulus,shear strength,and peeling rate of adhesive layer were studied.Obtained results showed that freeze-thaw aging treatment did not affect the water-resistance of the specimens as measured by thickness swelling rate and had little effect on the dimensional stability of the material.However,the applied aging treatment weakened the bending resistance of the glulam specimens with more pronounced effects on on low-density wood.On the other hand,bond strength of high-density wood was relatively more affected due to the appliedfreeze-thaw cycles.For highdensity wood,it is suggested that the shear strength of the adhesive layer be taken as an important index to determine the durability of freeze-thaw cycles aging.For low-density wood,on the other hand,the static bending strength can be used as an index to determine the durability of glulam under freeze-thaw cycles aging.
基金We are grateful to the National Natural Science Foundation of China （No. 20573098）
文摘A method of estimating the safe storage life （τ）, self-accelerating decomposition temperature （TsADT） and critical temperature of thermal explosion （Tb） of double-base propellant using isothermal and non-isothermal decomposition behaviours is presented. For double-base propellant composed of 56±1wt% of nitrocellulose （NC）, 27±0.5wt% of nitroglycerine （NG）, 8.15±0.15wt% of dinitrotoluene （DNT）, 2.5±0.1wt% of methyl centralite, 5.0±0.15wt% of catalyst and 1.0±0.1wt% of other, the values of r of 49.4 years at 40℃, of TSAOT of 151.35℃ and of Tb of 163.01℃ were obtained.
基金The study is financially supported by the National Natural Science Foundation of China(Grant Nos.12072116,11772132,12072115,11772131,11772134,11972162 and 11932007).
文摘This paper studies the effects of hygrothermal environment at different temperatures and ultraviolet(UV)radiation on the bending properties of epoxy polymer mortar(EPM).The microstructure changes of EPM during aging were studied by scanning electron microscopy,and the bending properties of EPM were predicted by the Arrhenius law.The results showed that the bending properties of EPM were greatly affected by the temperature in the hygrothermal aging,but not evidently affected by ultraviolet radiation in UV aging.The prediction of Arrhenius model shows that the EPM will steadily retain 92.8%,89.1%and 79.4%of the original flexural strength after long-term hygrothermal aging at 40∘C,60∘C and 80∘C,respectively.
基金the Deanship of Scientific Research at King Saud University for funding the work through the research group project No.RGP-VPP-133
文摘The objective of this work is to demonstrate how the viscoelastic, thermal, rheological, hardness, wear resistance and fracture behavior of bioinert high-density polyethylene （HDPE） can be changed by the addition of hydroxyapatite （HAP） nano particles. Also the effects of accelerated thermal ageing on the composite properties have been investigated. Different weight fractions of HAP nano particles up to 30 wt% have been incorporated in HDPE matrix by using melt blending in co-rotating intermeshing twin screw extruder. The fracture toughness results showed a remarkable decrease in proportion to the HAP content. The differential scanning calorimetry results indicated that the melting temperature and crystallinity were affected by the addition of HAP nano particles into the matrix. The complex viscosity increased as the percentage of HAP increased due to the restriction of the molecular mobility. The dynamic mechanical analysis results revealed that higher storage modulus （8.3 1011 Pa） could be obtained in the developed HDPE/HAP in 30 wt% compared to neat HDPE （5.1 1011 Pa）. Finally, the hardness and wear resistance of HDPE were improved significantly due to the addition of HAP nano particles. The changes in the HDPE and its nano composite properties due to ageing showed that the HDPE and its nano composites crystallinity increased while the fracture toughness, hardness, wear resistance, storage and loss modulus decreased.
基金supported by the National Key R&D Program of China(2021YFB2401800)the National Natural Science Foundation of China(22179008,21875022)+1 种基金the Natural Science Foundation of Chongqing,China(cstc2020jcyj-msxmX0654,cstc2020jcyjmsxmX0589,and cstc2021jcyj-msxm1125)China Postdoctoral Science Foundation(2021M700403)。
文摘In this paper,six different types of silicone rubberbased composites were investigated for applications in high voltage insulation through multi-stress accelerated aging conducted for a period of 5000 h both under AC and DC voltages.The main goal of this study was lifetime prediction of HTV-SR based composites at a typical multi-stress aging conditions.Several diagnostic techniques such as hydrophobicity assessment,leakage current measurement and FTIR were incorporated to assess the aging.As an outcome of this investigation,all the five hybrid samples were found as quite resistant to aging while the neat sample was comparatively,less resistant to the aging.Overall,among the studied samples,TS2 and TS4 appeared to have shown the highest resistance to aging giving a service life of 43.2 and 42 years,respectively under AC aging.Under DC stress the order of merit of investigated samples was identical to that of AC stress but having marginally less life spans.
基金financially supported by the National Natural Science Foundation of China (No. 51871218)the Youth Innovation Promotion Association, CAS (No. 2018227)+1 种基金the Ling Chuang Research Project of China National Nuclear CorporationCNNC Science Fund for Talented Young Scholars
文摘FF sample(nearly free ofδ-ferrite)and CF sample(containing∼4%δ-ferrite)were prepared from the AISI 316 austenitic stainless steel plate to elucidate the role ofδ-ferrite in the fatigue crack growth under the solution treated and accelerated aged conditions.It is found that the fatigue crack growth resistance of the CF sample is higher than the FF sample under the solution treated condition.However,a significant deterioration of the fatigue crack growth resistance is observed in the CF sample while little variation is found in the FF sample after accelerated aging treatment at 750°C for 10 h.In the solution treated condition,deflected crack growth path is present when the main crack encounters theδ-ferrite in the CF sample due to the differences in the fatigue responses between austenite andδ-ferrite.The measured growth rate of the deflected crack is significantly slower than that of the flat crack of the same length.After the accelerated aging treatment,microcracks are produced at the M_(23)C_(6)/δinterface due to the strain incompatibility between M_(23)C_(6) and retainedδ-ferrite when the decomposedδ-ferrite is subject to plastic deformation in the crack tip plastic zone.The preexisting microcracks in the front of crack tip provide a viable path for crack propagation,resulting in the relatively flat crack path.
文摘Protection of silver mirror stacks from environmental degradation before launching is crucial for space applications.Hereby,we report a comparative study of the advanced protection of silver mirror stacks for space telescopes provided by SiO_(2)and Al_(2)O_(3)coatings in conditions of accelerated aging by sulfida-tion.The model silver stack samples were deposited by cathodic magnetron sputtering on a reference silica substrate for optical applications and a surface-pretreated SiC substrate.Accelerated aging was per-formed in dry and more severe wet conditions.Optical micrographic observations,surface and interface analysis by Time-of Flight Secondary Ion Mass Spectrometry(ToF-SIMS)and reflectivity measurements were combined to comparatively study the effects of degradation.The results show a lower kinetics of degradation by accelerated aging of the stacks protected by the alumina coating in comparable test conditions.
基金supported by the National Key Project of Scientific and Technical Supporting Programs of China ( Grant No. 2006BAD09B06and 2006BAD03A0308)the "948" Program of Ministry of Water Resources of China (Grant No. 200207)
文摘Studies of ultra-drying and accelerated aging on Hippophae rhamnoides seeds from the arid and semiarid areas of northwest China were conducted. The results showed that H. rhamnoides seeds had higher desiccation endurance. When seeds were desiccated to 26 g/kg, their germination percentage, vigor indices and enzyme activity could be retained. After 30-day accelerated aging, ultra-dried seeds had better anti-aging ability and storability compared to natural dried seeds, and the best choice for the MC of seed was 34 g/kg. Accordingly, ultra-drying treatment could improve the storability.
基金the National Key R&D Program of China(No.2017YFB0902705)
文摘Based on Wiener process model, a new approach for reliability evaluation of cross-linked polyethylene(XLPE) is proposed to improve the lifetime evaluation reliability of XLPE under multi-stressing conditions and study the failure probability distribution. In this paper, two accelerated aging tests are carried out under combined thermal and vibration conditions. The volume resistance degradation data of XLPE samples are tested with a24 h interval under the accelerated stressing conditions at(130℃, 12 m/s^2) and(150℃, 8.5 m/s^2), respectively.Nonlinear degradation data obtained from the experiment are transformed to linear intermediate-variable values using time scaling function, and then linearized degradation data are calculated and evaluated on the basis of linear Wiener process model. Considering traditional Arrhenius equation and inverse power criterion, parameters of the linear Wiener model are estimated according to the maximum likelihood function. The relationship curves on probability density and reliability are given, and the lifetime distribution of XLPE under different stressing conditions is also obtained for evaluating the reliability of XLPE insulation. Finally, the life expectancy of XLPE is 17.9 a under an allowance temperature of 90℃ and an actual vibration acceleration of 0.5 m/s^2. The approach and results in this paper may be used for reliability assessment of high-voltage multiple samples or apparatuses.
