The multi-dimensional time-domain computational fluid dynamics(CFD) approach is extended to calculate the acoustic attenuation performance of water-filled piping silencers. Transmission loss predictions from the time-...The multi-dimensional time-domain computational fluid dynamics(CFD) approach is extended to calculate the acoustic attenuation performance of water-filled piping silencers. Transmission loss predictions from the time-domain CFD approach and the frequency-domain finite element method(FEM) agree well with each other for the dual expansion chamber silencer, straight-through and cross-flow perforated tube silencers without flow. Then, the time-domain CFD approach is used to investigate the effect of flow on the acoustic attenuation characteristics of perforated tube silencers. The numerical predictions demonstrate that the mean flow increases the transmission loss, especially at higher frequencies, and shifts the transmission loss curve to lower frequencies.展开更多
In marine engine exhaust silencing systems, the presence of exhaust gas flow influences the sound propagation inside the systems and the acoustic attenuation performance of silencers. In order to investigate the effec...In marine engine exhaust silencing systems, the presence of exhaust gas flow influences the sound propagation inside the systems and the acoustic attenuation performance of silencers. In order to investigate the effects of three-dimensional gas flow and acoustic damping on the acoustic attenuation characteristics of marine engine exhaust silencers, a dual reciprocity boundary element method (DRBEM) was developed. The acoustic governing equation in three-dimensional potential flow was derived first, and then the DRBEM numerical procedure is given. Compared to the conventional boundary element method (CBEM), the DRBEM considers the second order terms of flow Mach number in the acoustic governing equation, so it is suitable for the cases with higher Mach number subsonic flow. For complex exhaust silencers, it is difficult to apply the single-domain boundary element method, so a substructure approach based on the dual reciprocity boundary element method is presented. The experiments for measuring transmission loss of silencers are conducted, and the experimental setup and measurements are explained. The transmission loss of a single expansion chamber silencer with extended inlet and outlet were predicted by DRBEM and compared with the measurements. The good agreements between predictions and measurements are observed, which demonstrated that the derived acoustic governing equation and the DRBEM numerical procedure in the present study are correct.展开更多
A two-component lattice Boltzmann method(LBM) with a multiple-relaxation-time(MRT) collision operator is presented to improve the numerical stability of the single relaxation time(SRT) model. The macroscopic and the m...A two-component lattice Boltzmann method(LBM) with a multiple-relaxation-time(MRT) collision operator is presented to improve the numerical stability of the single relaxation time(SRT) model. The macroscopic and the momentum conservation equations can be retrieved through the Chapman–Enskog(C-E) expansion analysis. The equilibrium moment with the diffusion term is calculated, a diffusion phenomenon is simulated by utilizing the developed model, and the numerical stability is verified. Furthermore, the binary mixture channel model is designed to simulate the sound attenuation phenomenon, and the obtained simulation results are found to be consistent with the analytical solutions. The sound attenuation model is used to study the numerical stability and calculation accuracy of the LBM model. The simulation results show the stability and accuracy of the MRT model and the SRT model under different viscosity conditions. Finally,we study the influence of the error between the macroscopic equation of the MRT model and the standard incompressible Navier–Stokes equation on the calculation accuracy of the model to demonstrate the general applicability of the conclusions drawn by the sound attenuation model in the present study.展开更多
Compared with the laboratory acoustic measurement of sediment samples, the in-situ acoustic measurement in marine sediment is considered more accurate and rehable, because it covers all of the surrounding environment ...Compared with the laboratory acoustic measurement of sediment samples, the in-situ acoustic measurement in marine sediment is considered more accurate and rehable, because it covers all of the surrounding environment factors and avoids the disturbance during the course of sampling and transporting of sediment samples. A new multi-frequency in-situ geoacoustic measurement system （MFIS^AMS） has been developed. The system can provide acoustic vdocity （compressional wave） and attenuation profiles of the uppermost 4 - 8 m sediment in the seafloor. It consists of 8 channels with 12 frequencies （multi-frequencies） and 0.5 - 2 MHz sampling rates. The data collected can be transmiuted in real-time. Associated with inclinometer and altimeter, it can provide the data for depth emendation. Acoustic velocity and attenuation data have been obtained from two in-situ experiments conducted in the Hangzhou Bay.展开更多
The physical properties of silt in river reservoirs are important to river dynamics. Unfortunately, traditional techniques yield insufficient data. Based on porous media acoustic theory, we invert the acoustic paramet...The physical properties of silt in river reservoirs are important to river dynamics. Unfortunately, traditional techniques yield insufficient data. Based on porous media acoustic theory, we invert the acoustic parameters for the top river-bottom sediments. An explicit form of the acoustic reflection coefficient at the water-sediment interface is derived based on Biot＇s theory. The choice of parameters in the Blot model is discussed and the relation between acoustic and geological parameters is studied, including that between the reflection coefficient and porosity and the attenuation coefficient and permeability. The attenuation coefficient of the sound wave in the sediments is obtained by analyzing the shift of the signal frequency. The acoustic reflection coefficient at the water-sediment interface is extracted from the sonar signal. Thus, an inversion method of the physical parameters of the river- bottom surface sediments is proposed. The results of an experiment at the Sanmenxia reservoir suggest that the estimated grain size is close to the actual data. This demonstrates the ability of the proposed method to determine the physical parameters of sediments and estimate the grain size.展开更多
Interdigitated transducers(IDTs)were originally designed as delay lines for radars.Half a century later,they have found new life as actuators for microfluidic systems.By generating strong acoustic fields,they trigger ...Interdigitated transducers(IDTs)were originally designed as delay lines for radars.Half a century later,they have found new life as actuators for microfluidic systems.By generating strong acoustic fields,they trigger nonlinear effects that enable pumping and mixing of fluids,and moving particles without contact.However,the transition from signal processing to actuators comes with a range of challenges concerning power density and spatial resolution that have spurred exciting developments in solid-state acoustics and especially in IDT design.Assuming some familiarity with acoustofluidics,this paper aims to provide a tutorial for IDT design and characterization for the purpose of acoustofluidic actuation.It is targeted at a diverse audience of researchers in various fields,including fluid mechanics,acoustics,and microelectronics.展开更多
To understand sound propagation and beam formation, the physical properties of soft tissues from the biosonar system of odontocetes should be explored. Based on the acoustic impedance distributions of biosonar systems...To understand sound propagation and beam formation, the physical properties of soft tissues from the biosonar system of odontocetes should be explored. Based on the acoustic impedance distributions of biosonar systems, these processes have been examined via numerical simulations. In this study, the images of a short-beaked common dolphin(Delphinus delphis) were obtained via computed tomography. Then, the dolphin was dissected to extract tissue samples for additional examination. In addition to the speed of sound and density measurements, the acoustic attenuation coefficients of the biosonar system in the forehead were tested. The results revealed that the inner layer of the forehead was characterized using low sound speed, low density, and high attenuation. Acoustic fields and beam patterns were then evaluated by setting acoustic attenuation coefficients at different levels. Sounds propagating along the low-attenuation path had a lesser reduction in amplitude. Beam directivities in near and far fields suggested that changes in attenuation distribution would cause beam patterns to shift. These results indicated the complexity of a dolphin’s sonar emission system and helped improve our understanding of sound energy attenuation via studies on the forehead of odontocetes.展开更多
基金Project(11174065)supported by the National Natural Science Foundation of China
文摘The multi-dimensional time-domain computational fluid dynamics(CFD) approach is extended to calculate the acoustic attenuation performance of water-filled piping silencers. Transmission loss predictions from the time-domain CFD approach and the frequency-domain finite element method(FEM) agree well with each other for the dual expansion chamber silencer, straight-through and cross-flow perforated tube silencers without flow. Then, the time-domain CFD approach is used to investigate the effect of flow on the acoustic attenuation characteristics of perforated tube silencers. The numerical predictions demonstrate that the mean flow increases the transmission loss, especially at higher frequencies, and shifts the transmission loss curve to lower frequencies.
基金the National Natural Science Foundation of China under Grant No.10474016.
文摘In marine engine exhaust silencing systems, the presence of exhaust gas flow influences the sound propagation inside the systems and the acoustic attenuation performance of silencers. In order to investigate the effects of three-dimensional gas flow and acoustic damping on the acoustic attenuation characteristics of marine engine exhaust silencers, a dual reciprocity boundary element method (DRBEM) was developed. The acoustic governing equation in three-dimensional potential flow was derived first, and then the DRBEM numerical procedure is given. Compared to the conventional boundary element method (CBEM), the DRBEM considers the second order terms of flow Mach number in the acoustic governing equation, so it is suitable for the cases with higher Mach number subsonic flow. For complex exhaust silencers, it is difficult to apply the single-domain boundary element method, so a substructure approach based on the dual reciprocity boundary element method is presented. The experiments for measuring transmission loss of silencers are conducted, and the experimental setup and measurements are explained. The transmission loss of a single expansion chamber silencer with extended inlet and outlet were predicted by DRBEM and compared with the measurements. The good agreements between predictions and measurements are observed, which demonstrated that the derived acoustic governing equation and the DRBEM numerical procedure in the present study are correct.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 12174085, 11874140, and 11574072)the State Key Laboratory of Acoustics, Chinese Academy of Sciences (Grant No. SKLA201913)the Postgraduate Research and Practice Innovation Program of Jiangsu Province, China (Grant No. KYCX21 0478)。
文摘A two-component lattice Boltzmann method(LBM) with a multiple-relaxation-time(MRT) collision operator is presented to improve the numerical stability of the single relaxation time(SRT) model. The macroscopic and the momentum conservation equations can be retrieved through the Chapman–Enskog(C-E) expansion analysis. The equilibrium moment with the diffusion term is calculated, a diffusion phenomenon is simulated by utilizing the developed model, and the numerical stability is verified. Furthermore, the binary mixture channel model is designed to simulate the sound attenuation phenomenon, and the obtained simulation results are found to be consistent with the analytical solutions. The sound attenuation model is used to study the numerical stability and calculation accuracy of the LBM model. The simulation results show the stability and accuracy of the MRT model and the SRT model under different viscosity conditions. Finally,we study the influence of the error between the macroscopic equation of the MRT model and the standard incompressible Navier–Stokes equation on the calculation accuracy of the model to demonstrate the general applicability of the conclusions drawn by the sound attenuation model in the present study.
基金supported by the National High Technology Research and Development Program of China(863 Pro-gram, Grant No.2005AA615040)the National Natural Science Foundation of China(Grant No.40776038)+2 种基金Open Fund of Key Laboratory of Geo-detection(China University of Geosciences,Beijing),Ministry of Education (GrantNo. GDL0802)the Ocean Public Welfare Scientific Research Special Appropriation Project(Grant Nos.200805079and 200805005)the Open Fund of Key Laboratory of Submarine Geoscience,State Oceanic Administration(Grant No. KCSG0803)
文摘Compared with the laboratory acoustic measurement of sediment samples, the in-situ acoustic measurement in marine sediment is considered more accurate and rehable, because it covers all of the surrounding environment factors and avoids the disturbance during the course of sampling and transporting of sediment samples. A new multi-frequency in-situ geoacoustic measurement system （MFIS^AMS） has been developed. The system can provide acoustic vdocity （compressional wave） and attenuation profiles of the uppermost 4 - 8 m sediment in the seafloor. It consists of 8 channels with 12 frequencies （multi-frequencies） and 0.5 - 2 MHz sampling rates. The data collected can be transmiuted in real-time. Associated with inclinometer and altimeter, it can provide the data for depth emendation. Acoustic velocity and attenuation data have been obtained from two in-situ experiments conducted in the Hangzhou Bay.
基金supported by the National Key R&D Program of China(Grant No.2016YFC0401608)the Scientific Fund of the Yellow River Institute for Hydraulic Research(Grant Nos.HKY-JBYW-2016-09 and HKY-JBYW-2016-29)
文摘The physical properties of silt in river reservoirs are important to river dynamics. Unfortunately, traditional techniques yield insufficient data. Based on porous media acoustic theory, we invert the acoustic parameters for the top river-bottom sediments. An explicit form of the acoustic reflection coefficient at the water-sediment interface is derived based on Biot＇s theory. The choice of parameters in the Blot model is discussed and the relation between acoustic and geological parameters is studied, including that between the reflection coefficient and porosity and the attenuation coefficient and permeability. The attenuation coefficient of the sound wave in the sediments is obtained by analyzing the shift of the signal frequency. The acoustic reflection coefficient at the water-sediment interface is extracted from the sonar signal. Thus, an inversion method of the physical parameters of the river- bottom surface sediments is proposed. The results of an experiment at the Sanmenxia reservoir suggest that the estimated grain size is close to the actual data. This demonstrates the ability of the proposed method to determine the physical parameters of sediments and estimate the grain size.
基金This work was supported by the National Natural Science Foundation of China under Grant Nos.12004078 and 61874033the State Key Lab of ASIC and Systems,the Science and Technology Commission of Shanghai Municipality Award/Grant Nos.22QA1400900 and 22WZ2502200Fudan University 2021MS001,2021MS002 and 2020KF006.
文摘Interdigitated transducers(IDTs)were originally designed as delay lines for radars.Half a century later,they have found new life as actuators for microfluidic systems.By generating strong acoustic fields,they trigger nonlinear effects that enable pumping and mixing of fluids,and moving particles without contact.However,the transition from signal processing to actuators comes with a range of challenges concerning power density and spatial resolution that have spurred exciting developments in solid-state acoustics and especially in IDT design.Assuming some familiarity with acoustofluidics,this paper aims to provide a tutorial for IDT design and characterization for the purpose of acoustofluidic actuation.It is targeted at a diverse audience of researchers in various fields,including fluid mechanics,acoustics,and microelectronics.
基金supported by the National Key Research and Development Program of China (Grant Nos. 2018YFC1407504, and 2018YFC1407505)National Natural Science Foundation of China (Grant No. 12074323)+3 种基金Special Fund for Marine and Fishery Development of Xiamen (Grant No.20CZB015HJ01)Water Conservancy Science and Technology Innovation Project of Guangdong (Grant No. 2020-16)China Postdoctoral Science Foundation (Grant No. 2020M682086)China National Postdoctoral Program for Innovative Talents (Grant No. BX2021168)。
文摘To understand sound propagation and beam formation, the physical properties of soft tissues from the biosonar system of odontocetes should be explored. Based on the acoustic impedance distributions of biosonar systems, these processes have been examined via numerical simulations. In this study, the images of a short-beaked common dolphin(Delphinus delphis) were obtained via computed tomography. Then, the dolphin was dissected to extract tissue samples for additional examination. In addition to the speed of sound and density measurements, the acoustic attenuation coefficients of the biosonar system in the forehead were tested. The results revealed that the inner layer of the forehead was characterized using low sound speed, low density, and high attenuation. Acoustic fields and beam patterns were then evaluated by setting acoustic attenuation coefficients at different levels. Sounds propagating along the low-attenuation path had a lesser reduction in amplitude. Beam directivities in near and far fields suggested that changes in attenuation distribution would cause beam patterns to shift. These results indicated the complexity of a dolphin’s sonar emission system and helped improve our understanding of sound energy attenuation via studies on the forehead of odontocetes.
