The development of earth-abundant electrocatalysts with high performance for electrochemical CO_(2)reduction(ECR)is of great significance.Cu-based catalysts have been widely investigated for ECR due to their unique ab...The development of earth-abundant electrocatalysts with high performance for electrochemical CO_(2)reduction(ECR)is of great significance.Cu-based catalysts have been widely investigated for ECR due to their unique ability to generate various carbonaceous products,but directing selectivity toward one certain product and identifying the real active sites during ECR are still full of challenge.Here,after the incorporation of CdO into CuO,the Cu_(0.5)Cd_(0.5)-O catalyst achieves a 10.3-fold enhancement for CO selectivity in comparison with CuO,and a CO faradic efficiency nearly 90%with a current density around20 mA cm^(-2)could maintain at least 60 h.Interestingly,a wide CO/H_(2)ratio(0.07-10)is reached on Cu_(x)Cd_(1-x)-O catalysts by varying the Cu/Cd ratio,demonstrating the potential of syngas production using such catalysts.The results of ex situ XRD,XPS,and in situ Raman reveal that the real active sites of Cu_(0.5)Cd_(0.5)-O catalysts for CO production during ECR reaction are the reconstructed mixed phases of CuCd alloy and CdCO_(3).In situ FTIR and theoretical calculations further implicate the presence of Cd related species promotes the CO desorption and inhibits the H_(2)evolution,thus leading to an enhanced CO generation.展开更多
The insufficient active sites and slow interfacial charge trans-fer of photocatalysts restrict the efficiency of CO_(2) photoreduction.The synchronized modulation of the above key issues is demanding and chal-lenging....The insufficient active sites and slow interfacial charge trans-fer of photocatalysts restrict the efficiency of CO_(2) photoreduction.The synchronized modulation of the above key issues is demanding and chal-lenging.Herein,strain-induced strategy is developed to construct the Bi–O-bonded interface in Cu porphyrin-based monoatomic layer(PML-Cu)and Bi_(12)O_(17)Br_(2)(BOB),which triggers the surface interface dual polarization of PML-Cu/BOB(PBOB).In this multi-step polarization,the built-in electric field formed between the interfaces induces the electron transfer from con-duction band(CB)of BOB to CB of PML-Cu and suppresses its reverse migration.Moreover,the surface polarization of PML-Cu further promotes the electron converge in Cu atoms.The introduction of PML-Cu endows a high density of dispersed Cu active sites on the surface of PBOB,significantly promoting the adsorption and activation of CO_(2) and CO desorption.The conversion rate of CO_(2) photoreduction to CO for PBOB can reach 584.3μmol g-1,which is 7.83 times higher than BOB and 20.01 times than PML-Cu.This work offers valuable insights into multi-step polarization regulation and active site design for catalysts.展开更多
Electrocatalytic oxygen reduction reaction(ORR)is one of the most important reactions in electrochemical energy technologies such as fuel cells and metal–O2/air batteries,etc.However,the essential catalysts to overco...Electrocatalytic oxygen reduction reaction(ORR)is one of the most important reactions in electrochemical energy technologies such as fuel cells and metal–O2/air batteries,etc.However,the essential catalysts to overcome its slow reaction kinetic always undergo a complex dynamic evolution in the actual catalytic process,and the concomitant intermediates and catalytic products also occur continuous conversion and reconstruction.This makes them difficult to be accurately captured,making the identification of ORR active sites and the elucidation of ORR mechanisms difficult.Thus,it is necessary to use extensive in-situ characterization techniques to proceed the real-time monitoring of the catalyst structure and the evolution state of intermediates and products during ORR.This work reviews the major advances in the use of various in-situ techniques to characterize the catalytic processes of various catalysts.Specifically,the catalyst structure evolutions revealed directly by in-situ techniques are systematically summarized,such as phase,valence,electronic transfer,coordination,and spin states varies.In-situ revelation of intermediate adsorption/desorption behavior,and the real-time monitoring of the product nucleation,growth,and reconstruction evolution are equally emphasized in the discussion.Other interference factors,as well as in-situ signal assignment with the aid of theoretical calculations,are also covered.Finally,some major challenges and prospects of in-situ techniques for future catalysts research in the ORR process are proposed.展开更多
Sluggish kinetics of methanol oxidation reaction(MOR)and alkaline hydrogen evolution reaction(HER)even on precious Pt catalyst impede the large-scale commercialization of direct methanol fuel cell(DMFC)and water elect...Sluggish kinetics of methanol oxidation reaction(MOR)and alkaline hydrogen evolution reaction(HER)even on precious Pt catalyst impede the large-scale commercialization of direct methanol fuel cell(DMFC)and water electrolysis technologies.Since both of MOR and alkaline HER are related to water dissociation reaction(WDR),it is reasonable to invite secondary active sites toward WDR to pair with Pt for boosted MOR and alkaline HER activity on Pt.Mo_(2)C and Ni species are therefore employed to engineer NiPt-Mo_(2)C active site pairs,which can be encapsulated in carbon cages,via an in-situ self-confinement strategy.Mass activity of Pt in NiPt-Mo_(2)C@C toward HER is boosted to11.3 A mg_(pt)^(-1),33 times higher than that of Pt/C.Similarly,MOR catalytic activity of Pt in NiPt-Mo_(2)C@C is also improved by 10.5 times and the DMFC maximum power density is hence improved by 9-fold.By considering the great stability,NiPt-Mo_(2)C@C exhibits great practical application potential in DMFCs and water electrolysers.展开更多
The efficiency of photocatalytic overall water splitting was mainly limited by the slow reaction kinetics of water oxidation.How to design effective surface active site to overcome the slow water oxidation reaction wa...The efficiency of photocatalytic overall water splitting was mainly limited by the slow reaction kinetics of water oxidation.How to design effective surface active site to overcome the slow water oxidation reaction was a major challenge.Here,we propose a strategy to accelerate surface water oxidation through the fabrication spatially separated double active sites.FeCoPi/Bi_(4)NbO_(8)Cl-OVs photocatalyst with spatially separated double active site was prepared by hydrogen reduction photoanode deposition method.Due to the high matching of the spatial loading positions of FeCoPi and OVs with the photogenerated charge distribution of Bi_(4)NbO_(8)Cl and corresponding reaction mechanisms of substrate,the FeCoPi and OVs on the(001)and(010)crystal planes of Bi_(4)NbO_(8)Cl photocatalyst provided surface active site for water oxidation reaction and electron shuttle reaction(Fe^(3+)/Fe^(2+)),respectively.Under visible light irradiation,the evolution O_(2)rate of FeCoPi/Bi_(4)NbO_(8)Cl OVs was 16.8μmol h^(-1),as 32.9 times as Bi_(4)NbO_(8)Cl.Furthermore,a hydrogen evolution co-catalyst PtRu@Cr_(2)O_(3)was prepared by sequential photodeposition method.Due to the introduction of Ru,the Schottky barrier between PbTiO_(3)and Pt was effectively reduced,which promoted the transfer of photogenerated electrons to PtRu@Cr_(2)O_(3)thermodynamically,the evolution H_(2)rate on PtRu@Cr_(2)O_(3)/PbTiO_(3)increased to 664.8 times.On based of the synchronous enhancement of the water oxidation performance on FeCoPi/Bi_(4)NbO_(8)Cl-OVs and water reduction performance on PtRu@Cr_(2)O_(3)/PbTiO_(3),a novel Z-Scheme photocatalytic overall water splitting system(FeCoPi/Bi_(4)NbO_(8)Cl-OVs)mediated by Fe^(3+)/Fe^(2+)had successfully constructed.Under visible light irradiation,the evolution rates of H_(2)and O_(2)were 2.5 and 1.3μmol h^(-1),respectively.This work can provide some reference for the design of active site and the controllable synthesis of OVs spatial position.On the other hand,the hydrogen evolution co catalyst(PtRu@Cr_(2)O_(3))and the co catalyst FeCoPi for oxygen evolution contributed to the construction of an overall water splitting system.展开更多
Lithium-sulfur(Li-S)batteries with high theoretical energy density are promising advanced energy storage devices.However,shuttling of dissolute lithium polysulfide(LiPSs)and sluggish conversion kinetics impede their a...Lithium-sulfur(Li-S)batteries with high theoretical energy density are promising advanced energy storage devices.However,shuttling of dissolute lithium polysulfide(LiPSs)and sluggish conversion kinetics impede their applications.Herein,single nickel(Ni)atoms on two-dimensional(2D)nitrogen(N)-doped carbon with Ni-N_(4)-O overcoordinated structure(SANi-N_(4)-O/NC)are prepared and firstly used as a sulfur host of Li-S batteries.Due to the efficient polysulfides traps and highly LiPSs conversion effect of SANi-N_(4)-O/NC,the electrochemical performance of Li-S batteries obviously improved.The batteries can well operate even under high sulfur loading(5.8 mg cm^(-2))and lean electrolyte(6.1μL mg^(-1))condition.Meanwhile,density functional theory(DFT)calculations demonstrate that Ni single atom’s active sites decrease the energy barriers of conversion reactions from Li_(2)S_(8)to Li2S due to the strong interaction between SANi-N_(4)-O/NC and LiPSs.Thus,the kinetic conversion of LiPSs was accelerated and the shuttle effect is suppressed on SANi-N_(4)-O/NC host.This study provides a new design strategy for a 2D structure with single-atom overcoordinated active sites to facilitate the fast kinetic conversion of LiPSs for Li-S cathode.展开更多
A H_(2)O_(2)etching strategy was adopted to introduce coordinatively unsaturated sites(CUS)on MoS_(2)-based catalysts for dibenzothiophene(DBT)hydrodesulfurization(HDS).The CUS concentrations on MoS_(2) slabs were fin...A H_(2)O_(2)etching strategy was adopted to introduce coordinatively unsaturated sites(CUS)on MoS_(2)-based catalysts for dibenzothiophene(DBT)hydrodesulfurization(HDS).The CUS concentrations on MoS_(2) slabs were finely regulated by changing the concentrations of H_(2)O_(2)solution.With the increasing H_(2)O_(2)concentrations(0.1–0.3 mol/L),The CUS concentrations on MoS_(2) slabs increased gradually.However,the high-concentration H_(2)O_(2)etching(0.5 mol/L)increased the MoOxSy and MoO_(3) contents on MoS_(2) slabs compared to etching with the H_(2)O_(2)concentration of 0.3 mol/L,which led to the less CUS concentration in the sulfided Mo–H-0.5 catalyst than in the sulfided Mo–H-0.3 catalyst.A microstructure-activity correlation indicated that the CUS introduced by H_(2)O_(2)etching on MoS_(2) slabs significantly enhanced DBT HDS.Different Co loadings were further introduced into Mo–H-0.3,which had the most CUS concentration,and the corresponding 0.2-CoMo catalyst with the highest CoMoS content(3.853 wt%)exhibited the highest reaction rate constant of 6.95×10^(−6)mol g^(−1)s^(−1)among these CoMo catalysts.展开更多
Despite wide applications of noble metal-based catalysts in 5-hydroxymethylfurfural(HMF)oxidation,promoting the catalytic performance at low loading amounts still remains a significant challenge.Herein,a series of met...Despite wide applications of noble metal-based catalysts in 5-hydroxymethylfurfural(HMF)oxidation,promoting the catalytic performance at low loading amounts still remains a significant challenge.Herein,a series of metal oxide modified MO_(x)-Au/TiO_(2)(M=Fe,Co,Ni)catalysts with low Au loading amount of 0.5 wt%were synthesized.Addition of transition metal oxides promotes electron transfer and generation of the Au^(δ-)-O_(v)-Ti^(3+)interface.A combination study reveals that the dual-active site(Au^(δ-)-O_(v)-Ti^(3+))governs the catalytic performance of the ratedetermining step,namely hydroxyl group oxidation.Au^(δ-) site facilitates chemisorption and activation of O_(2) molecules.At the same time,O_(v)-Ti^(3+) site acts as the role of“killing two birds with one stone”:enhancing adsorption of both reactants,accelerating the activation and dissociation of H_(2)O,and facilitating activation of the adsorbed O_(2).Besides,superoxide radicals instead of base is the active oxygen species during the rate-determining step.On this basis,a FDCA yield of 71.2% was achieved under base-free conditions,complying with the“green chemistry”principle.This work provides a new strategy for the transition metal oxides modification of Au-based catalysts,which would be constructive for the rational design of other heterogeneous catalysts.展开更多
Atmospheric CO_(2)concentrations are soaring due to the continued use of fossil fuels in energy production,an anthropogenic activity that is playing a leading role in global warming.Thus,research aimed at the capture ...Atmospheric CO_(2)concentrations are soaring due to the continued use of fossil fuels in energy production,an anthropogenic activity that is playing a leading role in global warming.Thus,research aimed at the capture and conversion of CO_(2)into value-added products,such as cyclic carbonates,is booming.While CO_(2)is an abundant,cheap,non-toxic,and readily accessible Cl feedstock,its thermodynamic stability necessitates the development of highly efficient catalysts that are able to promote chemical reactions under mild conditions.In this work,a novel mesoporous poly(ionic liquid)with dual active sites was synthesized through a facile method that involves co-polymerization,post-synthetic metalation,and supercritical CO_(2)drying.Due to a high density of nucleophilic and electrophilic sites,the as-prepared poly(ionic liquid),denoted as P2D-4BrBQA-Zn,offers excellent performance in a CO_(2)cycloaddition reaction using epichlorohydrin as the substrate(98.9%conversion and 96.9%selectivity).Moreover the reaction is carried out under mild,solvent-free,and additive-free conditions.Notably,P2D-4BrBQA-Zn also efficiently promotes the conversion of various other epoxide substrates into cyclic carbonates.Overall,the catalyst is found to have excellent substrate compatibility,stability,and recyclability.展开更多
In this work, a CoNxC active sites-rich three-dimensional porous carbon nanofibers network derived from bacterial cellulose and bimetal-ZIFs is prepared via a nucleation growth strategy and a pyrolysis process.The mat...In this work, a CoNxC active sites-rich three-dimensional porous carbon nanofibers network derived from bacterial cellulose and bimetal-ZIFs is prepared via a nucleation growth strategy and a pyrolysis process.The material displays excellent electrocatalytic activity for the oxygen reduction reaction, reaching a high limiting diffusion current density of -7.8 mA cm^(-2), outperforming metal–organic frameworks derived multifunctional electrocatalysts, and oxygen evolution reaction and hydrogen evolution reaction with low overpotentials of 380 and 107 mV, respectively. When the electrochemical properties are further evaluated, the electrocatalyst as an air cathode for Zn-air batteries exhibits a high cycling stability for63 h as well as a maximum power density of 308 mW cm^(-2), which is better than those for most Zn-air batteries reported to date. In addition, a power density of 152 mW cm^(-2) is provided by the solid-state Zn-air batteries, and the cycling stability is outstanding for 24 h. The remarkable electrocatalytic properties are attributed to the synergistic effect of the 3 D porous carbon nanofibers network and abundant inserted CoNxC active sites, which enable the fast transmission of ions and mass and simultaneously provide a large contact area for the electrode/electrolyte.展开更多
The catalytic conversion of CO_(2) to fuels or chemicals is considered to be an effective pathway to mitigate the greenhouse effect. To develop new types of efficient and durable catalysts, it is critical to identify ...The catalytic conversion of CO_(2) to fuels or chemicals is considered to be an effective pathway to mitigate the greenhouse effect. To develop new types of efficient and durable catalysts, it is critical to identify the catalytic active sites, surface intermediates, and reaction mechanisms to reveal the relationship between the active sites and catalytic performance. However, the structure of a heterogeneous catalyst usually dynamically changes during reaction, bringing a great challenge for the identification of catalytic active sites and reaction pathways. Therefore, in-situ/operando techniques have been employed to real-time monitor the dynamic evolution of the structure of active sites under actual reaction conditions to precisely build the structure–function relationship. Here, we review the recent progress in the application of various in-situ/operando techniques in identifying active sites for catalytic conversion of CO_(2) over heterogeneous catalysts. We systematically summarize the applications of various optical and X-ray spectroscopy techniques, including Raman spectroscopy, Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and X-ray absorption spectroscopy (XAS), in identifying active sites and determining reaction mechanisms of the CO_(2) thermochemical conversion with hydrogen and light alkanes over heterogeneous catalysts. Finally, we discuss challenges and opportunities for the development of in-situ characterization in the future to further enlarge the capability of these powerful techniques.展开更多
Adsorption desulfurization performance of Na Y,HY and Ce HY zeolites is evaluated in a miniature fixedbed flow by model gasoline containing with thiophene,tetrahydrothiophene,2-methylthiophene,benzothiophene or mixed ...Adsorption desulfurization performance of Na Y,HY and Ce HY zeolites is evaluated in a miniature fixedbed flow by model gasoline containing with thiophene,tetrahydrothiophene,2-methylthiophene,benzothiophene or mixed sulfur compounds.The structural properties of adsorbents are characterized by XRD,N2-adsorption and XPS techniques.Adsorption desulfurization mechanisms of these sulfur compounds over the specific active sites of adsorbents as a major focus of this work,have been systematically investigated by using in situ FT-IR spectroscopy with single and double probing molecules.Desulfurization experimental results show that the Ce HY adsorbent exhibits superior adsorption sulfur capacity at breakthrough point of zero sulfur for ultra-deep removal of each thiophenic sulfur compound,especially in the capture of aromatic 2-methylthiophene(about ca.28.6 mgS/gadsorbent).The results of in situ FT-IR with single probing molecule demonstrate an important finding that high oligomerization ability of thiophene or 2-methylthiophene on the CeHY can promote the breakthrough adsorption sulfur capacity,mainly resulting from the synergy between Br?nsted acid sites and Ce(III)hydroxylated species active sites located in the supercages of Ce HY.Meanwhile,the result of in situ FT-IR with double probing molecules further reveals the essence of oligomerization reactions of thiophene and 2-methylthiophene molecules on those specific active sites.By contrast,the oligomerization reaction of benzothiophene molecules on the active sites of Ce HY cannot occur due to the restriction of cavity size of supercages,but they can be adsorbed on the Br?nsted acid sites via protonation,and on Ce(III)hydroxylated species and extra-framework aluminum hydroxyls species via direct"S-M"bonding interaction.As to the tetrahydrothiophene,adsorption mechanism is similar to that of benzothiophene,except in the absence of protonation.The paper can provide a new design idea of specific adsorption active sites in excellent desulfurization adsorbents for elevating higher quality of FCC gasoline in the future.展开更多
The charge distribution on Ni-Mo-S active sites can affect hydrodenitrogenation(HDN)activity.In this study,a series of model Ni-Mo-S were developed with various charge distributions.For comparison,the charge distribut...The charge distribution on Ni-Mo-S active sites can affect hydrodenitrogenation(HDN)activity.In this study,a series of model Ni-Mo-S were developed with various charge distributions.For comparison,the charge distribution effects on quinoline HDN were studied.The results show that a lack of electrons and extra protons can both lower the orbital eigenvalue of the Ni-Mo-S,leading to stronger adsorption of nitrogen-containing compounds and inhibition of ammonia desorption.Electron deficiency will improve the generation of active hydrogen on the active sites but inhibit hydrogen transfer to the nitrogen compounds;extra protons can provide H^(+)to the nitrogen compounds,which will flexibly transfer between the nitrogen compound and active sites,thus improving the cleavage of the C-N bond.展开更多
Oxygen reduction reaction(ORR)is an important electrochemical process for renewable energy conversion and storage applications such as fuel cells and metal-air batteries.ORR is sluggish in kinetics and requires a larg...Oxygen reduction reaction(ORR)is an important electrochemical process for renewable energy conversion and storage applications such as fuel cells and metal-air batteries.ORR is sluggish in kinetics and requires a large amount of platinum group metal(PGM)-based catalysts to facilitate its slow reaction rate.Application of precious metals raises the cost and decreases the competitivity of these devices in the market.To address this challenge,PGM-free ORR catalysts have been intensively investigated as an alternative to replace the PGM-based catalysts and to promote the deployment of ORR-related applications.In particular,the biomass holds promising potential to be used as the precursor material for PGM-free ORR catalysts.This pathway has gained more and more attention in recent years.In this review,recent advances regarding biomass-derived ORR catalysts are summarized with a focus on the rational design of both active sites and porous structures which are the two key factors in determining ORR performance of catalysts.At the end,the perspectives of development of biomass-derived catalysts is discussed.展开更多
The oxygen evolution reaction (OER) dominates the efficiency of electrocatalytic water splitting owing to its sluggish kinetics.Perovskite oxides (ABO_(3)) have emerged as promising candidates to accelerate the OER pr...The oxygen evolution reaction (OER) dominates the efficiency of electrocatalytic water splitting owing to its sluggish kinetics.Perovskite oxides (ABO_(3)) have emerged as promising candidates to accelerate the OER process owing to their high intrinsic activities and tailorable properties.Fe ions in perovskite oxides have been proved to be a highly catalytic element for OER,while some Fe-based perovskites such as SrTi_(0.8)Fe_(0.2)O_(3-δ)(STF) and La_(0.66)Ti_(0.8)Fe_(0.2)O_(3-δ)(LTF) exhibit inferior OER activity.Yet the essential reason is still unclear and the effective method to promote the activity of such perovskite is also lacking.Herein,an in-situ exsolution strategy was proposed to boost the OER by migrating Fe from the bulk to the surface.Significantly enhanced OER activity was achieved on STF and LTF perovskites with surfacedecorated oxygen vacancies and Fe nanoparticles.In addition,theoretical calculation confirmed that the oxygen vacancies and Fe nanoparticle on surface could lower the overpotential of OER by facilitating the adsorption of OH^(-).From this study,migration of the active elements in perovskite is found to be an effective strategy to increase the quantity and activity of active sites,providing new insights and understanding for designing efficient OER catalysts.展开更多
Understanding the nature of Pt active sites is of great importance for the structure-sensitive base-free oxidation of glycerol. In the present work, the remarkable Pt particle size effects on glycerol conversion and p...Understanding the nature of Pt active sites is of great importance for the structure-sensitive base-free oxidation of glycerol. In the present work, the remarkable Pt particle size effects on glycerol conversion and products formation from the oxidation of the primary and the secondary hydroxyl groups are understood by combining the model calculations and DFT calculations, aiming to discriminate the corresponding dominant Pt active sites. The Pt(100) facet is demonstrated to be the dominant active sites for the glycerol conversion and the products formation from the two routes. The insights revealed here could shed new light on fundamental understanding of the Pt particle size effects and then guiding the design and optimization of Pt-catalyzed base-free oxidation of glycerol toward targeted products.展开更多
The lithium-sulfur battery has attracted enormous attention as being one of the most significant energy storage technologies due to its high energy density and cost-effectiveness.However,the "shuttle effect"...The lithium-sulfur battery has attracted enormous attention as being one of the most significant energy storage technologies due to its high energy density and cost-effectiveness.However,the "shuttle effect" of polysulfide intermediates represents a formidable challenge towards its wide applications.Herein,we have designed and synthesized two-dimensional Cu,Zn and Sn-based multimetallic sulfide nanosheets to construct multi-active sites for the immobilization and entrapment of polysulfides with offering better performance in liquid Li2S6-based lithium-polysulfide batteries.Both experimental measurements and theoretical computations demonstrate that the interfacial multi-active sites of multimetallic sulfides not only accelerate the multi-chained redox reactions of highly diffusible polysulfides,but also strengthen affinities toward polysulfides.By adopting multimetallic sulfide nanosheets as the sulfur host,the liquid Li2 S6-based cell exhibits an impressive rate capability with 1200 mAh/g and retains 580 mAh/g at 0.5 mA/cm^(2) after 1000 cycles.With high sulfur mass loading conditions,the cell with 2.0 mg/cm^(2) sulfur loading delivers a cell capacity of 1068 mAh/g and maintains 480 mAh/g with 0.8 mA/cm^(2) and 500 cycles.This study provides new insights into the multifunctional material design with multi-active sites for elevated lithium-polysulfide batteries.展开更多
The urea oxidization reaction(UOR)is an important anodic reaction in electro-catalytic energy conversion.However,the sluggish reaction kinetics and complex catalyst transformation in electrocatalysis require activity ...The urea oxidization reaction(UOR)is an important anodic reaction in electro-catalytic energy conversion.However,the sluggish reaction kinetics and complex catalyst transformation in electrocatalysis require activity improvement and better mechanistic understanding of the state-of-the-art Ni(OH)_(2) catalyst.Herein,by utilizing low-temperature argon(Ar)plasma processing,tooth-wheel Ni(OH)_(2) nanosheets self-supported on Ni foam(Ni(OH)_(2)-Ar)are demonstrated to have improved UOR activity compared to conventional Ni(OH)_(2).The theoretical assessment confirms that the edge has a smaller cation vacancy formation energy than the basal plane,consequently explaining the structural formation.Operando and quasi-operando methods are employed to investigate the dynamic evolution of the Ni(OH)_(2) film in UOR.The crucial dehydrogenation products of Ni(OH)_(5)O^(-)intermediates are identified to be stable on the etched edge and explain the enhanced UOR in the low potential region.In addition,the dynamic active sites are monitored to elucidate the reaction mechanism in different potential ranges.展开更多
The oxygen evolution reaction(OER)in acid solution is a significant challenge for non-precious metal electrocatalysts based on the transition metals although they have shown good OER performance in alkaline solution.I...The oxygen evolution reaction(OER)in acid solution is a significant challenge for non-precious metal electrocatalysts based on the transition metals although they have shown good OER performance in alkaline solution.In this study,we synthesized the electrocatalysts containing two or three Co species(Co,CoO and Co3O4)nanoparticles on porous graphitic carbon(PGC)nanosheets which were prepared by a facile and low-cost synthesis where Co(NO3)2•6H2O and glucose were pyrolyzed in the presence of sodium chloride template.The Co3O4-dominated catalyst as-prepared,Co3O4/PGC,is OER active in acid solution(1.74 V at a current density of 10 mA cm^−2).We identified the OER active sites in the catalyst to be the Co3O4 nanoparticles rather than carbon-coated Co.Through comparative studies of the varied catalysts,we also proved that Co3O4 is catalytically more active than Co and CoO.The Co3O4/PGC catalyst,however,lost almost of all its activity after 100 voltammetric cycles in the 1.2-1.8 V voltage window.When the catalyst stability was examined potentiostatically at different potentials,the catalyst showed good stability at 1.4 V.The stability study also revealed the mechanism of the catalyst instability in acid was caused by Co3O4 reduction below 1.4 V and by Co3O4 oxidation above 1.4 V.1.4 V is therefore a unique potential where Co3O4 nanoparticles are neither oxidized nor reduced to be susceptible to acid dissolution.展开更多
Squalene and oxidosqualene cyclizations are regarded as the most complex chemical reactions in the nature,which can achieve protonation,deprotonation,a sequence of hydride and methyl migration. Dammarenediol-Ⅱ syntha...Squalene and oxidosqualene cyclizations are regarded as the most complex chemical reactions in the nature,which can achieve protonation,deprotonation,a sequence of hydride and methyl migration. Dammarenediol-Ⅱ synthase( DS),as a kind of 2,3-oxidosqualene-triterpene cyclase,catalyses2,3-oxidosqualene to form dammarenediol-Ⅱ. To assess the three-dimensional( 3 D) structure and catalytic active sites of dammarenediol-Ⅱ synthase,utilizing the homology modeling method,3 D models of DS were established in the Modeller9 v14 software and I-TASSER server. With the highest sequence identity with DS,human oxidosqualene cyclase 3 D models( PDB: 1 W6K and 1 W6J) were chosen as templates. Through further evaluation and optimization,an optimal DS model was obtained consequently. Then several putative catalytic active sites were found through the molecular docking simulation between DS model and product dammarenediol-Ⅱ by using Autodock 4. 2. Finally,site-directed mutants of DS were expressed in Saccharomyces cerevisiae,a significant decrease of the yield of dammarenediol-Ⅱ is achieved,which verified the significance of these putative active sites.展开更多
基金financially supported by the National Natural Science Foundation of China with grant number of 22172082 and 21978137。
文摘The development of earth-abundant electrocatalysts with high performance for electrochemical CO_(2)reduction(ECR)is of great significance.Cu-based catalysts have been widely investigated for ECR due to their unique ability to generate various carbonaceous products,but directing selectivity toward one certain product and identifying the real active sites during ECR are still full of challenge.Here,after the incorporation of CdO into CuO,the Cu_(0.5)Cd_(0.5)-O catalyst achieves a 10.3-fold enhancement for CO selectivity in comparison with CuO,and a CO faradic efficiency nearly 90%with a current density around20 mA cm^(-2)could maintain at least 60 h.Interestingly,a wide CO/H_(2)ratio(0.07-10)is reached on Cu_(x)Cd_(1-x)-O catalysts by varying the Cu/Cd ratio,demonstrating the potential of syngas production using such catalysts.The results of ex situ XRD,XPS,and in situ Raman reveal that the real active sites of Cu_(0.5)Cd_(0.5)-O catalysts for CO production during ECR reaction are the reconstructed mixed phases of CuCd alloy and CdCO_(3).In situ FTIR and theoretical calculations further implicate the presence of Cd related species promotes the CO desorption and inhibits the H_(2)evolution,thus leading to an enhanced CO generation.
基金This work was supported by the National Natural Science Foundation of China(Nos.22138011,22205108,22378206)Open Research Fund of Key Laboratory of the Ministry of Education for Advanced Catalysis Materials and Zhejiang Key Laboratory for Reactive Chemistry on Solid Surfaces(KLMEACM 202201),Zhejiang Normal University.
文摘The insufficient active sites and slow interfacial charge trans-fer of photocatalysts restrict the efficiency of CO_(2) photoreduction.The synchronized modulation of the above key issues is demanding and chal-lenging.Herein,strain-induced strategy is developed to construct the Bi–O-bonded interface in Cu porphyrin-based monoatomic layer(PML-Cu)and Bi_(12)O_(17)Br_(2)(BOB),which triggers the surface interface dual polarization of PML-Cu/BOB(PBOB).In this multi-step polarization,the built-in electric field formed between the interfaces induces the electron transfer from con-duction band(CB)of BOB to CB of PML-Cu and suppresses its reverse migration.Moreover,the surface polarization of PML-Cu further promotes the electron converge in Cu atoms.The introduction of PML-Cu endows a high density of dispersed Cu active sites on the surface of PBOB,significantly promoting the adsorption and activation of CO_(2) and CO desorption.The conversion rate of CO_(2) photoreduction to CO for PBOB can reach 584.3μmol g-1,which is 7.83 times higher than BOB and 20.01 times than PML-Cu.This work offers valuable insights into multi-step polarization regulation and active site design for catalysts.
基金the National Natural Science Foundation of China(No.52072256)Shanxi Science and Technology Major Project(No.20201101016)+1 种基金Key R&D program of Shanxi Province(No.202102030201006)Research Project Supported by Shanxi Scholarship Council of China(HGKY2019031).
文摘Electrocatalytic oxygen reduction reaction(ORR)is one of the most important reactions in electrochemical energy technologies such as fuel cells and metal–O2/air batteries,etc.However,the essential catalysts to overcome its slow reaction kinetic always undergo a complex dynamic evolution in the actual catalytic process,and the concomitant intermediates and catalytic products also occur continuous conversion and reconstruction.This makes them difficult to be accurately captured,making the identification of ORR active sites and the elucidation of ORR mechanisms difficult.Thus,it is necessary to use extensive in-situ characterization techniques to proceed the real-time monitoring of the catalyst structure and the evolution state of intermediates and products during ORR.This work reviews the major advances in the use of various in-situ techniques to characterize the catalytic processes of various catalysts.Specifically,the catalyst structure evolutions revealed directly by in-situ techniques are systematically summarized,such as phase,valence,electronic transfer,coordination,and spin states varies.In-situ revelation of intermediate adsorption/desorption behavior,and the real-time monitoring of the product nucleation,growth,and reconstruction evolution are equally emphasized in the discussion.Other interference factors,as well as in-situ signal assignment with the aid of theoretical calculations,are also covered.Finally,some major challenges and prospects of in-situ techniques for future catalysts research in the ORR process are proposed.
基金financial support from the National Natural Science Foundation of China(Nos.21875224,22179121)the Fundamental Research Founds for National University,China University of Geosciences(Wuhan)。
文摘Sluggish kinetics of methanol oxidation reaction(MOR)and alkaline hydrogen evolution reaction(HER)even on precious Pt catalyst impede the large-scale commercialization of direct methanol fuel cell(DMFC)and water electrolysis technologies.Since both of MOR and alkaline HER are related to water dissociation reaction(WDR),it is reasonable to invite secondary active sites toward WDR to pair with Pt for boosted MOR and alkaline HER activity on Pt.Mo_(2)C and Ni species are therefore employed to engineer NiPt-Mo_(2)C active site pairs,which can be encapsulated in carbon cages,via an in-situ self-confinement strategy.Mass activity of Pt in NiPt-Mo_(2)C@C toward HER is boosted to11.3 A mg_(pt)^(-1),33 times higher than that of Pt/C.Similarly,MOR catalytic activity of Pt in NiPt-Mo_(2)C@C is also improved by 10.5 times and the DMFC maximum power density is hence improved by 9-fold.By considering the great stability,NiPt-Mo_(2)C@C exhibits great practical application potential in DMFCs and water electrolysers.
基金supported by National Natural Science Foundation of China(22369022)Technology Innovation Leading Program of Shaanxi(2022QFY07-03)。
文摘The efficiency of photocatalytic overall water splitting was mainly limited by the slow reaction kinetics of water oxidation.How to design effective surface active site to overcome the slow water oxidation reaction was a major challenge.Here,we propose a strategy to accelerate surface water oxidation through the fabrication spatially separated double active sites.FeCoPi/Bi_(4)NbO_(8)Cl-OVs photocatalyst with spatially separated double active site was prepared by hydrogen reduction photoanode deposition method.Due to the high matching of the spatial loading positions of FeCoPi and OVs with the photogenerated charge distribution of Bi_(4)NbO_(8)Cl and corresponding reaction mechanisms of substrate,the FeCoPi and OVs on the(001)and(010)crystal planes of Bi_(4)NbO_(8)Cl photocatalyst provided surface active site for water oxidation reaction and electron shuttle reaction(Fe^(3+)/Fe^(2+)),respectively.Under visible light irradiation,the evolution O_(2)rate of FeCoPi/Bi_(4)NbO_(8)Cl OVs was 16.8μmol h^(-1),as 32.9 times as Bi_(4)NbO_(8)Cl.Furthermore,a hydrogen evolution co-catalyst PtRu@Cr_(2)O_(3)was prepared by sequential photodeposition method.Due to the introduction of Ru,the Schottky barrier between PbTiO_(3)and Pt was effectively reduced,which promoted the transfer of photogenerated electrons to PtRu@Cr_(2)O_(3)thermodynamically,the evolution H_(2)rate on PtRu@Cr_(2)O_(3)/PbTiO_(3)increased to 664.8 times.On based of the synchronous enhancement of the water oxidation performance on FeCoPi/Bi_(4)NbO_(8)Cl-OVs and water reduction performance on PtRu@Cr_(2)O_(3)/PbTiO_(3),a novel Z-Scheme photocatalytic overall water splitting system(FeCoPi/Bi_(4)NbO_(8)Cl-OVs)mediated by Fe^(3+)/Fe^(2+)had successfully constructed.Under visible light irradiation,the evolution rates of H_(2)and O_(2)were 2.5 and 1.3μmol h^(-1),respectively.This work can provide some reference for the design of active site and the controllable synthesis of OVs spatial position.On the other hand,the hydrogen evolution co catalyst(PtRu@Cr_(2)O_(3))and the co catalyst FeCoPi for oxygen evolution contributed to the construction of an overall water splitting system.
基金financial support from the National Natural Science Foundation of China(21878270,21878267,21922811,21978258 and 21961160742)the Leading Innovative and Entrepreneur Team Introduction Program of Zhejiang(2019R01006)+3 种基金the Zhejiang Provincial Natural Science Foundation of China(LR19B060002)the Fundamental Research Funds for the Central Universities(2020XZZX002-09)the Startup Foundation for Hundred-Talent Program of Zhejiang Universitythe Zhejiang Key Laboratory of Marine Materials and Protective Technologies(2020K10)。
文摘Lithium-sulfur(Li-S)batteries with high theoretical energy density are promising advanced energy storage devices.However,shuttling of dissolute lithium polysulfide(LiPSs)and sluggish conversion kinetics impede their applications.Herein,single nickel(Ni)atoms on two-dimensional(2D)nitrogen(N)-doped carbon with Ni-N_(4)-O overcoordinated structure(SANi-N_(4)-O/NC)are prepared and firstly used as a sulfur host of Li-S batteries.Due to the efficient polysulfides traps and highly LiPSs conversion effect of SANi-N_(4)-O/NC,the electrochemical performance of Li-S batteries obviously improved.The batteries can well operate even under high sulfur loading(5.8 mg cm^(-2))and lean electrolyte(6.1μL mg^(-1))condition.Meanwhile,density functional theory(DFT)calculations demonstrate that Ni single atom’s active sites decrease the energy barriers of conversion reactions from Li_(2)S_(8)to Li2S due to the strong interaction between SANi-N_(4)-O/NC and LiPSs.Thus,the kinetic conversion of LiPSs was accelerated and the shuttle effect is suppressed on SANi-N_(4)-O/NC host.This study provides a new design strategy for a 2D structure with single-atom overcoordinated active sites to facilitate the fast kinetic conversion of LiPSs for Li-S cathode.
基金support of the National Natural Science Foundation of China(Grant Nos.21978323 and 22108145).
文摘A H_(2)O_(2)etching strategy was adopted to introduce coordinatively unsaturated sites(CUS)on MoS_(2)-based catalysts for dibenzothiophene(DBT)hydrodesulfurization(HDS).The CUS concentrations on MoS_(2) slabs were finely regulated by changing the concentrations of H_(2)O_(2)solution.With the increasing H_(2)O_(2)concentrations(0.1–0.3 mol/L),The CUS concentrations on MoS_(2) slabs increased gradually.However,the high-concentration H_(2)O_(2)etching(0.5 mol/L)increased the MoOxSy and MoO_(3) contents on MoS_(2) slabs compared to etching with the H_(2)O_(2)concentration of 0.3 mol/L,which led to the less CUS concentration in the sulfided Mo–H-0.5 catalyst than in the sulfided Mo–H-0.3 catalyst.A microstructure-activity correlation indicated that the CUS introduced by H_(2)O_(2)etching on MoS_(2) slabs significantly enhanced DBT HDS.Different Co loadings were further introduced into Mo–H-0.3,which had the most CUS concentration,and the corresponding 0.2-CoMo catalyst with the highest CoMoS content(3.853 wt%)exhibited the highest reaction rate constant of 6.95×10^(−6)mol g^(−1)s^(−1)among these CoMo catalysts.
基金support of State Key Laboratory of Chemical Engineering (No.SKL-ChE-20A02)the support of International Clean Energy Talent Program by China Scholarship Council.
文摘Despite wide applications of noble metal-based catalysts in 5-hydroxymethylfurfural(HMF)oxidation,promoting the catalytic performance at low loading amounts still remains a significant challenge.Herein,a series of metal oxide modified MO_(x)-Au/TiO_(2)(M=Fe,Co,Ni)catalysts with low Au loading amount of 0.5 wt%were synthesized.Addition of transition metal oxides promotes electron transfer and generation of the Au^(δ-)-O_(v)-Ti^(3+)interface.A combination study reveals that the dual-active site(Au^(δ-)-O_(v)-Ti^(3+))governs the catalytic performance of the ratedetermining step,namely hydroxyl group oxidation.Au^(δ-) site facilitates chemisorption and activation of O_(2) molecules.At the same time,O_(v)-Ti^(3+) site acts as the role of“killing two birds with one stone”:enhancing adsorption of both reactants,accelerating the activation and dissociation of H_(2)O,and facilitating activation of the adsorbed O_(2).Besides,superoxide radicals instead of base is the active oxygen species during the rate-determining step.On this basis,a FDCA yield of 71.2% was achieved under base-free conditions,complying with the“green chemistry”principle.This work provides a new strategy for the transition metal oxides modification of Au-based catalysts,which would be constructive for the rational design of other heterogeneous catalysts.
基金financial support from the National Natural Science Foundation of China(22078274,21903066)。
文摘Atmospheric CO_(2)concentrations are soaring due to the continued use of fossil fuels in energy production,an anthropogenic activity that is playing a leading role in global warming.Thus,research aimed at the capture and conversion of CO_(2)into value-added products,such as cyclic carbonates,is booming.While CO_(2)is an abundant,cheap,non-toxic,and readily accessible Cl feedstock,its thermodynamic stability necessitates the development of highly efficient catalysts that are able to promote chemical reactions under mild conditions.In this work,a novel mesoporous poly(ionic liquid)with dual active sites was synthesized through a facile method that involves co-polymerization,post-synthetic metalation,and supercritical CO_(2)drying.Due to a high density of nucleophilic and electrophilic sites,the as-prepared poly(ionic liquid),denoted as P2D-4BrBQA-Zn,offers excellent performance in a CO_(2)cycloaddition reaction using epichlorohydrin as the substrate(98.9%conversion and 96.9%selectivity).Moreover the reaction is carried out under mild,solvent-free,and additive-free conditions.Notably,P2D-4BrBQA-Zn also efficiently promotes the conversion of various other epoxide substrates into cyclic carbonates.Overall,the catalyst is found to have excellent substrate compatibility,stability,and recyclability.
基金financial support from the following sources: the National Natural Science Foundation of China (NSFC) (Grants 51607054, 51772073)Young Talent of Hebei Province (Nos. 70280011808, 70280016160250)+1 种基金Hebei Province Outstanding Youth Fund (A2018201019, A2017201082)Hebei Province Natural Science Fund (A2015201050)。
文摘In this work, a CoNxC active sites-rich three-dimensional porous carbon nanofibers network derived from bacterial cellulose and bimetal-ZIFs is prepared via a nucleation growth strategy and a pyrolysis process.The material displays excellent electrocatalytic activity for the oxygen reduction reaction, reaching a high limiting diffusion current density of -7.8 mA cm^(-2), outperforming metal–organic frameworks derived multifunctional electrocatalysts, and oxygen evolution reaction and hydrogen evolution reaction with low overpotentials of 380 and 107 mV, respectively. When the electrochemical properties are further evaluated, the electrocatalyst as an air cathode for Zn-air batteries exhibits a high cycling stability for63 h as well as a maximum power density of 308 mW cm^(-2), which is better than those for most Zn-air batteries reported to date. In addition, a power density of 152 mW cm^(-2) is provided by the solid-state Zn-air batteries, and the cycling stability is outstanding for 24 h. The remarkable electrocatalytic properties are attributed to the synergistic effect of the 3 D porous carbon nanofibers network and abundant inserted CoNxC active sites, which enable the fast transmission of ions and mass and simultaneously provide a large contact area for the electrode/electrolyte.
基金Authors acknowledge the financial support from the National Natural Science Foundation of China(NSFC)under Grant No.21978148 and 21808120.
文摘The catalytic conversion of CO_(2) to fuels or chemicals is considered to be an effective pathway to mitigate the greenhouse effect. To develop new types of efficient and durable catalysts, it is critical to identify the catalytic active sites, surface intermediates, and reaction mechanisms to reveal the relationship between the active sites and catalytic performance. However, the structure of a heterogeneous catalyst usually dynamically changes during reaction, bringing a great challenge for the identification of catalytic active sites and reaction pathways. Therefore, in-situ/operando techniques have been employed to real-time monitor the dynamic evolution of the structure of active sites under actual reaction conditions to precisely build the structure–function relationship. Here, we review the recent progress in the application of various in-situ/operando techniques in identifying active sites for catalytic conversion of CO_(2) over heterogeneous catalysts. We systematically summarize the applications of various optical and X-ray spectroscopy techniques, including Raman spectroscopy, Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and X-ray absorption spectroscopy (XAS), in identifying active sites and determining reaction mechanisms of the CO_(2) thermochemical conversion with hydrogen and light alkanes over heterogeneous catalysts. Finally, we discuss challenges and opportunities for the development of in-situ characterization in the future to further enlarge the capability of these powerful techniques.
基金financially supported by the National Natural Science Foundation of China (Nos. U1662135 and 21376114, 21076100)by the China National Petroleum Corporation (Grant No. 1001A-01-01-01)
文摘Adsorption desulfurization performance of Na Y,HY and Ce HY zeolites is evaluated in a miniature fixedbed flow by model gasoline containing with thiophene,tetrahydrothiophene,2-methylthiophene,benzothiophene or mixed sulfur compounds.The structural properties of adsorbents are characterized by XRD,N2-adsorption and XPS techniques.Adsorption desulfurization mechanisms of these sulfur compounds over the specific active sites of adsorbents as a major focus of this work,have been systematically investigated by using in situ FT-IR spectroscopy with single and double probing molecules.Desulfurization experimental results show that the Ce HY adsorbent exhibits superior adsorption sulfur capacity at breakthrough point of zero sulfur for ultra-deep removal of each thiophenic sulfur compound,especially in the capture of aromatic 2-methylthiophene(about ca.28.6 mgS/gadsorbent).The results of in situ FT-IR with single probing molecule demonstrate an important finding that high oligomerization ability of thiophene or 2-methylthiophene on the CeHY can promote the breakthrough adsorption sulfur capacity,mainly resulting from the synergy between Br?nsted acid sites and Ce(III)hydroxylated species active sites located in the supercages of Ce HY.Meanwhile,the result of in situ FT-IR with double probing molecules further reveals the essence of oligomerization reactions of thiophene and 2-methylthiophene molecules on those specific active sites.By contrast,the oligomerization reaction of benzothiophene molecules on the active sites of Ce HY cannot occur due to the restriction of cavity size of supercages,but they can be adsorbed on the Br?nsted acid sites via protonation,and on Ce(III)hydroxylated species and extra-framework aluminum hydroxyls species via direct"S-M"bonding interaction.As to the tetrahydrothiophene,adsorption mechanism is similar to that of benzothiophene,except in the absence of protonation.The paper can provide a new design idea of specific adsorption active sites in excellent desulfurization adsorbents for elevating higher quality of FCC gasoline in the future.
基金the financial support from the Sinopec Science and Technology Department(Grant No.121014-1)。
文摘The charge distribution on Ni-Mo-S active sites can affect hydrodenitrogenation(HDN)activity.In this study,a series of model Ni-Mo-S were developed with various charge distributions.For comparison,the charge distribution effects on quinoline HDN were studied.The results show that a lack of electrons and extra protons can both lower the orbital eigenvalue of the Ni-Mo-S,leading to stronger adsorption of nitrogen-containing compounds and inhibition of ammonia desorption.Electron deficiency will improve the generation of active hydrogen on the active sites but inhibit hydrogen transfer to the nitrogen compounds;extra protons can provide H^(+)to the nitrogen compounds,which will flexibly transfer between the nitrogen compound and active sites,thus improving the cleavage of the C-N bond.
基金This study is financially supported by the Natural Sciences and Engineering Research Council of Canada(NSERC)the Fonds de Recherche du Québec—Nature et Technologies(FRQNT),Centre Québécois sur les Materiaux Fonctionnels(CQMF)+3 种基金Institut National de la Recherche Scientifique(INRS)National Natural Science Foundation of China(Grant No.21805064)SS acknowledges the ECS-Toyota Young Investigator Fellowship.LD acknowledges the scholarship under the International Postdoctoral Exchange Fellowship Program by the Office of China Postdoctoral Council(Grant No.20180072)FRQNT for the Postdoctoral scholarship(V2,file number:274384)in Quebec Canada.
文摘Oxygen reduction reaction(ORR)is an important electrochemical process for renewable energy conversion and storage applications such as fuel cells and metal-air batteries.ORR is sluggish in kinetics and requires a large amount of platinum group metal(PGM)-based catalysts to facilitate its slow reaction rate.Application of precious metals raises the cost and decreases the competitivity of these devices in the market.To address this challenge,PGM-free ORR catalysts have been intensively investigated as an alternative to replace the PGM-based catalysts and to promote the deployment of ORR-related applications.In particular,the biomass holds promising potential to be used as the precursor material for PGM-free ORR catalysts.This pathway has gained more and more attention in recent years.In this review,recent advances regarding biomass-derived ORR catalysts are summarized with a focus on the rational design of both active sites and porous structures which are the two key factors in determining ORR performance of catalysts.At the end,the perspectives of development of biomass-derived catalysts is discussed.
基金financial supports from the Youth Innovation Fund of Dalian Institute of Chemical Physics (DICP I202126)the Strategic Priority Research Program of Chinese Academy of Sciences (XDB17020400)。
文摘The oxygen evolution reaction (OER) dominates the efficiency of electrocatalytic water splitting owing to its sluggish kinetics.Perovskite oxides (ABO_(3)) have emerged as promising candidates to accelerate the OER process owing to their high intrinsic activities and tailorable properties.Fe ions in perovskite oxides have been proved to be a highly catalytic element for OER,while some Fe-based perovskites such as SrTi_(0.8)Fe_(0.2)O_(3-δ)(STF) and La_(0.66)Ti_(0.8)Fe_(0.2)O_(3-δ)(LTF) exhibit inferior OER activity.Yet the essential reason is still unclear and the effective method to promote the activity of such perovskite is also lacking.Herein,an in-situ exsolution strategy was proposed to boost the OER by migrating Fe from the bulk to the surface.Significantly enhanced OER activity was achieved on STF and LTF perovskites with surfacedecorated oxygen vacancies and Fe nanoparticles.In addition,theoretical calculation confirmed that the oxygen vacancies and Fe nanoparticle on surface could lower the overpotential of OER by facilitating the adsorption of OH^(-).From this study,migration of the active elements in perovskite is found to be an effective strategy to increase the quantity and activity of active sites,providing new insights and understanding for designing efficient OER catalysts.
基金financially supported by the Natural Science Foundation of China (21776077)the Shanghai Natural Science Foundation (17ZR1407300 and 17ZR1407500)+5 种基金the Program for Professor of Special Appointment (Eastern Scholar) at Shanghai Institutions of Higher Learningthe Shanghai Rising-Star Program (17QA1401200)the Open Project of State Key Laboratory of Chemical Engineering (SKLChe-15C03)the State Key Laboratory of Organic– Inorganic Composites (oic-201801007)the Fundamental Research Funds for the Central Universities (222201718003)the 111 Project of the Ministry of Education of China (B08021)
文摘Understanding the nature of Pt active sites is of great importance for the structure-sensitive base-free oxidation of glycerol. In the present work, the remarkable Pt particle size effects on glycerol conversion and products formation from the oxidation of the primary and the secondary hydroxyl groups are understood by combining the model calculations and DFT calculations, aiming to discriminate the corresponding dominant Pt active sites. The Pt(100) facet is demonstrated to be the dominant active sites for the glycerol conversion and the products formation from the two routes. The insights revealed here could shed new light on fundamental understanding of the Pt particle size effects and then guiding the design and optimization of Pt-catalyzed base-free oxidation of glycerol toward targeted products.
基金supported by the Start-up Foundation of Nanjing Tech Universitythe National Natural Science Foundation of China (61904080, 61801210, 91833302)+3 种基金the Natural Science Foundation of Jiangsu Province (BK20190670, BK20180686)the Natural Science Foundation of Colleges and Universities in Jiangsu Province (19KJB530008)the Innovation Scientists and Technicians Team Construction Projects of Henan Province (CXTD2017002)the funding for “Distinguished professors” and “High-level talents in six industries” of Jiangsu Province and Technology Innovation Project for Overseas Scholar in Nanjing。
文摘The lithium-sulfur battery has attracted enormous attention as being one of the most significant energy storage technologies due to its high energy density and cost-effectiveness.However,the "shuttle effect" of polysulfide intermediates represents a formidable challenge towards its wide applications.Herein,we have designed and synthesized two-dimensional Cu,Zn and Sn-based multimetallic sulfide nanosheets to construct multi-active sites for the immobilization and entrapment of polysulfides with offering better performance in liquid Li2S6-based lithium-polysulfide batteries.Both experimental measurements and theoretical computations demonstrate that the interfacial multi-active sites of multimetallic sulfides not only accelerate the multi-chained redox reactions of highly diffusible polysulfides,but also strengthen affinities toward polysulfides.By adopting multimetallic sulfide nanosheets as the sulfur host,the liquid Li2 S6-based cell exhibits an impressive rate capability with 1200 mAh/g and retains 580 mAh/g at 0.5 mA/cm^(2) after 1000 cycles.With high sulfur mass loading conditions,the cell with 2.0 mg/cm^(2) sulfur loading delivers a cell capacity of 1068 mAh/g and maintains 480 mAh/g with 0.8 mA/cm^(2) and 500 cycles.This study provides new insights into the multifunctional material design with multi-active sites for elevated lithium-polysulfide batteries.
基金the financial support from City University of Hong Kong Strategic Research Grant(SRG)(7005505)the National Natural Science Foundation of China(51601136 and 51604202)。
文摘The urea oxidization reaction(UOR)is an important anodic reaction in electro-catalytic energy conversion.However,the sluggish reaction kinetics and complex catalyst transformation in electrocatalysis require activity improvement and better mechanistic understanding of the state-of-the-art Ni(OH)_(2) catalyst.Herein,by utilizing low-temperature argon(Ar)plasma processing,tooth-wheel Ni(OH)_(2) nanosheets self-supported on Ni foam(Ni(OH)_(2)-Ar)are demonstrated to have improved UOR activity compared to conventional Ni(OH)_(2).The theoretical assessment confirms that the edge has a smaller cation vacancy formation energy than the basal plane,consequently explaining the structural formation.Operando and quasi-operando methods are employed to investigate the dynamic evolution of the Ni(OH)_(2) film in UOR.The crucial dehydrogenation products of Ni(OH)_(5)O^(-)intermediates are identified to be stable on the etched edge and explain the enhanced UOR in the low potential region.In addition,the dynamic active sites are monitored to elucidate the reaction mechanism in different potential ranges.
基金supported by the National Research Foundation,Prime Minister’s Office,Singapore under its Competitive。
文摘The oxygen evolution reaction(OER)in acid solution is a significant challenge for non-precious metal electrocatalysts based on the transition metals although they have shown good OER performance in alkaline solution.In this study,we synthesized the electrocatalysts containing two or three Co species(Co,CoO and Co3O4)nanoparticles on porous graphitic carbon(PGC)nanosheets which were prepared by a facile and low-cost synthesis where Co(NO3)2•6H2O and glucose were pyrolyzed in the presence of sodium chloride template.The Co3O4-dominated catalyst as-prepared,Co3O4/PGC,is OER active in acid solution(1.74 V at a current density of 10 mA cm^−2).We identified the OER active sites in the catalyst to be the Co3O4 nanoparticles rather than carbon-coated Co.Through comparative studies of the varied catalysts,we also proved that Co3O4 is catalytically more active than Co and CoO.The Co3O4/PGC catalyst,however,lost almost of all its activity after 100 voltammetric cycles in the 1.2-1.8 V voltage window.When the catalyst stability was examined potentiostatically at different potentials,the catalyst showed good stability at 1.4 V.The stability study also revealed the mechanism of the catalyst instability in acid was caused by Co3O4 reduction below 1.4 V and by Co3O4 oxidation above 1.4 V.1.4 V is therefore a unique potential where Co3O4 nanoparticles are neither oxidized nor reduced to be susceptible to acid dissolution.
基金Supported by the National Basic Research Program of China(2012CB721105)the Major Research Plan of Tianjin(16YFXTSF00460)
文摘Squalene and oxidosqualene cyclizations are regarded as the most complex chemical reactions in the nature,which can achieve protonation,deprotonation,a sequence of hydride and methyl migration. Dammarenediol-Ⅱ synthase( DS),as a kind of 2,3-oxidosqualene-triterpene cyclase,catalyses2,3-oxidosqualene to form dammarenediol-Ⅱ. To assess the three-dimensional( 3 D) structure and catalytic active sites of dammarenediol-Ⅱ synthase,utilizing the homology modeling method,3 D models of DS were established in the Modeller9 v14 software and I-TASSER server. With the highest sequence identity with DS,human oxidosqualene cyclase 3 D models( PDB: 1 W6K and 1 W6J) were chosen as templates. Through further evaluation and optimization,an optimal DS model was obtained consequently. Then several putative catalytic active sites were found through the molecular docking simulation between DS model and product dammarenediol-Ⅱ by using Autodock 4. 2. Finally,site-directed mutants of DS were expressed in Saccharomyces cerevisiae,a significant decrease of the yield of dammarenediol-Ⅱ is achieved,which verified the significance of these putative active sites.