Wehrlite samples (size: ~4 cm) hosted in basaltic lavas from the SW of Hosséré Dammougalré are located in the western Adamawa Plateau. Porphyritic and allotriomorphic texture characterize respectively h...Wehrlite samples (size: ~4 cm) hosted in basaltic lavas from the SW of Hosséré Dammougalré are located in the western Adamawa Plateau. Porphyritic and allotriomorphic texture characterize respectively host Basalt and wehrlite xenoliths. The phenocrysts of olivine (Fo68−74), and Ti-magnetite are scattered in host basalt. Wehrlite xenoliths (~4 cm size) contain Cr-rich clinopyroxene (diopise-augite), olivine (Fo76−88) and chromiferous spinel. Equilibrium temperatures calculated from Fe/Mg exchange reaction for olivine/spinel vary between 944°C and 1102°C. The wehrlite olivine crystals with low Fo (<90) indicate a re-equilibration of Fe-Mg in the host basalt at low temperatures. All the analyzed wehrlite clinopyroxenes have crystallized at high pressures as evidenced by the Alvi and Aliv contents. The studied spinel-bearing wehrlite xenoliths represent probably the residual portions of the upper mantle, which are an important source of information about lithospheric composition and thermal evolution beneath the Adamawa Plateau.展开更多
Three monogenetic cones in the Baossi–Warack area, Ngaoundéré, Adamawa Plateau forming part of the Cameroon Volcanic Line(CVL) are documented in this study. Basaltic lavas(<1 km^3) scattered around these...Three monogenetic cones in the Baossi–Warack area, Ngaoundéré, Adamawa Plateau forming part of the Cameroon Volcanic Line(CVL) are documented in this study. Basaltic lavas(<1 km^3) scattered around these vents and restricted volcaniclastic deposits were emplaced by Hawaiian and mild strombolian style eruptions. The lavas are porphyritic, mainly composed of olivine(chrysolite) and clinopyroxene(diopside and augite) phenocrysts and plagioclase(andesine) microphenocrysts. Accessory minerals include titano-magnetite and titano-hematite, nepheline,apatite and amphibole xenocrysts. Sanidine occurs in some samples and sodi-potassic albite in others. Some olivines and clinopyroxenes exhibit resorbed margins and thin reaction rims while plagioclase displays oscillatory zoning, and sieved textures as a result of magma mixing. Whole-rock geochemistry data indicates that the lavas are silica-undersaturated, composed of basanites and basalts, showing little compositional variations(SiO_2: 39.20 wt.%–48.01 wt.%,MgO: 5.29 wt.%–9.70 wt.%). Trace elements patterns of these lavas suggest they are enriched in LILE including Pb,probably due to crustal contamination. REE patterns suggest cogenetic magmas below Baossi 1 and Baossi 2 volcanoes,and distinct sources below Warack volcano and nearby lavas.The lavas studied show affinity to high-μ(HIMU), enriched type Ⅰ(EM1) and Oceanic Island Basalt(OIB)-like mantle signatures and thus indicate a heterogeneous mantle source underneath the vents as noted at other monogenetic and polygenetic volcanoes along the CVL. Primary melts derived from low degrees of partial melting(0.5%–2%) and encountered low rates of fractionation, and crustal contamination coupled with magma mixing. These melts evolved independently through structural weaknesses in the basement.展开更多
In order to analyze and determine the geological structures of the Adamawa plateau, the terrestrial gravity data were combined to data computed from GGM02C gravity model. The dense gravity net obtained were further in...In order to analyze and determine the geological structures of the Adamawa plateau, the terrestrial gravity data were combined to data computed from GGM02C gravity model. The dense gravity net obtained were further introduced into qualitative and quantitative interpretations. The resulting Bouguer anomaly map obtained from combined data shows NE-SW direction which nearly coincides with the main direction of the fractures affecting the basement in the region and indicates strong gradients marking the presence of discontinuities between heavy and negative gravity anomaly. In order to conduct the quantitative interpretation of the combined gravity data, three profiles were drawn on the residual Bouguer anomaly map and therefore were interpreted using spectral analysis method and 3D density inversion. The knowledge of the depth and density of the geological structures show an uplift of dense rocks under the granite-gneiss substratum. This dense material found in the ENE-WSW direction of the Adamawa Plateau is interpreted as basaltic intrusion probably resulting from tectonic processes. According to this study, the depths of 3.83 km and 9.62 km are the new values of depths obtained for futures investigations in the Adamawa plateau.展开更多
Teleseismic events recorded by stations located in the Adamawa Plateau have been treated using the inversion method of receiver functions. These six stations are part of a network of 32 large strip seismic stations in...Teleseismic events recorded by stations located in the Adamawa Plateau have been treated using the inversion method of receiver functions. These six stations are part of a network of 32 large strip seismic stations installed in Cameroon between 2005 and 2007. This method allowed us to investigate the lithospheric mantle in that region. The results obtained from the velocity model have been compared to some existing results in this region. These results show the existence of a thick crust having an average thickness of about 35.2 km and a corresponding S wave velocity of 3.7 km/s. For an average S wave velocity of 4.4 km/s the lithospheric mantle appears to be thin in nature and has a thickness that varies from 39 km and 49.6 km. Beyond the lower lithospheric mantle, there exists a low velocity zone, whose thickness varies between 20 km and 43.9 km. The variation of the low velocity zone leads to variation of the lower boundary of the lithospheric mantle boundary at the depths ranging from 73.8 km and 85 km.展开更多
Trypanosomosis remains the number one killer of livestock in spite of efforts made to eradicate tsetse flies in the Adamawa plateau of Cameroon. Acetone-baited Laveissière type biconical traps were pitched at 100...Trypanosomosis remains the number one killer of livestock in spite of efforts made to eradicate tsetse flies in the Adamawa plateau of Cameroon. Acetone-baited Laveissière type biconical traps were pitched at 100 meter intervals in strategic geo-referenced positions in various ecological niches of the landscape for 5 consecutive days in selected villages in Mayo Rey, Mbere, Vina and Faro et Deo divisions. All 493 tsetse flies captured in sites other than Mboula wereG. morsitans submositans.Measurement of different morphometric characters on the wings of each individual fly was undertaken using the Du Jardin package. The data was processed and analysed by “Permutaciones, Analisis Discriminante (PAD)” and “Bootstraps, Analisis en Componentes principales”. The three major sampling sites on the plateau yielded similar results as demonstrated by the neighbour joining tree of Mahalanobis distances but tests using PAD showed the differences between group means to be significant展开更多
The Beka volcanic massifs are located northeast of Ngaoundere region, within the Adamawa plateau. It consists mainly of basanites, trachytes and phonolites. The petrographic study shows that all the basanite lavas hav...The Beka volcanic massifs are located northeast of Ngaoundere region, within the Adamawa plateau. It consists mainly of basanites, trachytes and phonolites. The petrographic study shows that all the basanite lavas have porphyritic microlitic textures with a more pronounced magmatic fluidity than the felsic lavas displaying trachytic textures. The lavas are composed of phenocrysts, microlites and microphenocrysts of olivine, clinopyroxene, plagioclase and iron-titanium oxides for the basanites and of greenish clinopyroxene, alkali feldspar, and titanomagnetite for the felsic lavas. Chemical microprobe analysis indicates that the olivine crystals are magnesian (Fo<sub>73-78</sub>). Clinopyroxene crystals have a composition of diopside (Wo<sub>47-</sub>) in the basaltic lavas and diopside near the hedenbergite pole in the trachytes phonoliths and titanomagnetite (TiO<sub>2</sub>: 21.13% - 22.36% and FeO: 68% - 68%). Chemical analyses on whole rocks show that all the lavas belong to the same series and the felsic lavas come from the differentiation of basanite lavas by fractional crystallization of the minerals therein. The basanites originate from a low rate of partial melting of an OIB-type mantle. Contamination and mixing processes are suspected. Lavas of similar composition are found in other volcanic centres of the Adamawa plateau and the continental and oceanic sectors of the Cameroon Volcanic Line, in particular the Kapsiki plateau, Mounts Cameroon and Bamenda.展开更多
Geoelectric data obtained from forty (40) vertical electrical soundings collected with a Schlumberger device in the Adamawa plateau region, also known as the Cameroon water tower, have been treated by the least-square...Geoelectric data obtained from forty (40) vertical electrical soundings collected with a Schlumberger device in the Adamawa plateau region, also known as the Cameroon water tower, have been treated by the least-squares inversion method. In order to study the nature and thickness of the aquifer and the necessary geoelectric parameters, quantitative and qualitative interpretations of the data were made. The results obtained showed that: about four to five geoelectric layers have been delimited in the study area with a dominance of the KH curve, which can be used as a reference for future studies. The first two layers constitute an association of clay and laterite with resistivity values ranging from 58 to 9122 Ω·m and whose thickness is between 0.6 and 13.4 m. The third layer is a potentially aquiferous laterite composed of clay, laterite and especially clay sand and cracked/good granite, with a dominance of sandy alteration whose resistivity values are between 81 and 960 Ω·m and its thickness between 12.2 and 26.8 m. The fourth and fifth layers are made up of cracked/good granite with a resistivity ranging from 12-10705 Ω·m with an average value of 1817 Ω·m. This study also shows that the North-East, South-West and South sectors could be the groundwater convergence zones and that the average depth of the basement aquifer roof is about 28.3 m. The geoelectric sections of certain demarcated vertical electrical sounding stations are consistent with the geologic description of the area.展开更多
文摘Wehrlite samples (size: ~4 cm) hosted in basaltic lavas from the SW of Hosséré Dammougalré are located in the western Adamawa Plateau. Porphyritic and allotriomorphic texture characterize respectively host Basalt and wehrlite xenoliths. The phenocrysts of olivine (Fo68−74), and Ti-magnetite are scattered in host basalt. Wehrlite xenoliths (~4 cm size) contain Cr-rich clinopyroxene (diopise-augite), olivine (Fo76−88) and chromiferous spinel. Equilibrium temperatures calculated from Fe/Mg exchange reaction for olivine/spinel vary between 944°C and 1102°C. The wehrlite olivine crystals with low Fo (<90) indicate a re-equilibration of Fe-Mg in the host basalt at low temperatures. All the analyzed wehrlite clinopyroxenes have crystallized at high pressures as evidenced by the Alvi and Aliv contents. The studied spinel-bearing wehrlite xenoliths represent probably the residual portions of the upper mantle, which are an important source of information about lithospheric composition and thermal evolution beneath the Adamawa Plateau.
基金financially supported by the Ministry of Higher Education, Cameroon, through the Special Allocation for the Modernization of Research (SAMR) granted to the first author
文摘Three monogenetic cones in the Baossi–Warack area, Ngaoundéré, Adamawa Plateau forming part of the Cameroon Volcanic Line(CVL) are documented in this study. Basaltic lavas(<1 km^3) scattered around these vents and restricted volcaniclastic deposits were emplaced by Hawaiian and mild strombolian style eruptions. The lavas are porphyritic, mainly composed of olivine(chrysolite) and clinopyroxene(diopside and augite) phenocrysts and plagioclase(andesine) microphenocrysts. Accessory minerals include titano-magnetite and titano-hematite, nepheline,apatite and amphibole xenocrysts. Sanidine occurs in some samples and sodi-potassic albite in others. Some olivines and clinopyroxenes exhibit resorbed margins and thin reaction rims while plagioclase displays oscillatory zoning, and sieved textures as a result of magma mixing. Whole-rock geochemistry data indicates that the lavas are silica-undersaturated, composed of basanites and basalts, showing little compositional variations(SiO_2: 39.20 wt.%–48.01 wt.%,MgO: 5.29 wt.%–9.70 wt.%). Trace elements patterns of these lavas suggest they are enriched in LILE including Pb,probably due to crustal contamination. REE patterns suggest cogenetic magmas below Baossi 1 and Baossi 2 volcanoes,and distinct sources below Warack volcano and nearby lavas.The lavas studied show affinity to high-μ(HIMU), enriched type Ⅰ(EM1) and Oceanic Island Basalt(OIB)-like mantle signatures and thus indicate a heterogeneous mantle source underneath the vents as noted at other monogenetic and polygenetic volcanoes along the CVL. Primary melts derived from low degrees of partial melting(0.5%–2%) and encountered low rates of fractionation, and crustal contamination coupled with magma mixing. These melts evolved independently through structural weaknesses in the basement.
文摘In order to analyze and determine the geological structures of the Adamawa plateau, the terrestrial gravity data were combined to data computed from GGM02C gravity model. The dense gravity net obtained were further introduced into qualitative and quantitative interpretations. The resulting Bouguer anomaly map obtained from combined data shows NE-SW direction which nearly coincides with the main direction of the fractures affecting the basement in the region and indicates strong gradients marking the presence of discontinuities between heavy and negative gravity anomaly. In order to conduct the quantitative interpretation of the combined gravity data, three profiles were drawn on the residual Bouguer anomaly map and therefore were interpreted using spectral analysis method and 3D density inversion. The knowledge of the depth and density of the geological structures show an uplift of dense rocks under the granite-gneiss substratum. This dense material found in the ENE-WSW direction of the Adamawa Plateau is interpreted as basaltic intrusion probably resulting from tectonic processes. According to this study, the depths of 3.83 km and 9.62 km are the new values of depths obtained for futures investigations in the Adamawa plateau.
文摘Teleseismic events recorded by stations located in the Adamawa Plateau have been treated using the inversion method of receiver functions. These six stations are part of a network of 32 large strip seismic stations installed in Cameroon between 2005 and 2007. This method allowed us to investigate the lithospheric mantle in that region. The results obtained from the velocity model have been compared to some existing results in this region. These results show the existence of a thick crust having an average thickness of about 35.2 km and a corresponding S wave velocity of 3.7 km/s. For an average S wave velocity of 4.4 km/s the lithospheric mantle appears to be thin in nature and has a thickness that varies from 39 km and 49.6 km. Beyond the lower lithospheric mantle, there exists a low velocity zone, whose thickness varies between 20 km and 43.9 km. The variation of the low velocity zone leads to variation of the lower boundary of the lithospheric mantle boundary at the depths ranging from 73.8 km and 85 km.
文摘Trypanosomosis remains the number one killer of livestock in spite of efforts made to eradicate tsetse flies in the Adamawa plateau of Cameroon. Acetone-baited Laveissière type biconical traps were pitched at 100 meter intervals in strategic geo-referenced positions in various ecological niches of the landscape for 5 consecutive days in selected villages in Mayo Rey, Mbere, Vina and Faro et Deo divisions. All 493 tsetse flies captured in sites other than Mboula wereG. morsitans submositans.Measurement of different morphometric characters on the wings of each individual fly was undertaken using the Du Jardin package. The data was processed and analysed by “Permutaciones, Analisis Discriminante (PAD)” and “Bootstraps, Analisis en Componentes principales”. The three major sampling sites on the plateau yielded similar results as demonstrated by the neighbour joining tree of Mahalanobis distances but tests using PAD showed the differences between group means to be significant
文摘The Beka volcanic massifs are located northeast of Ngaoundere region, within the Adamawa plateau. It consists mainly of basanites, trachytes and phonolites. The petrographic study shows that all the basanite lavas have porphyritic microlitic textures with a more pronounced magmatic fluidity than the felsic lavas displaying trachytic textures. The lavas are composed of phenocrysts, microlites and microphenocrysts of olivine, clinopyroxene, plagioclase and iron-titanium oxides for the basanites and of greenish clinopyroxene, alkali feldspar, and titanomagnetite for the felsic lavas. Chemical microprobe analysis indicates that the olivine crystals are magnesian (Fo<sub>73-78</sub>). Clinopyroxene crystals have a composition of diopside (Wo<sub>47-</sub>) in the basaltic lavas and diopside near the hedenbergite pole in the trachytes phonoliths and titanomagnetite (TiO<sub>2</sub>: 21.13% - 22.36% and FeO: 68% - 68%). Chemical analyses on whole rocks show that all the lavas belong to the same series and the felsic lavas come from the differentiation of basanite lavas by fractional crystallization of the minerals therein. The basanites originate from a low rate of partial melting of an OIB-type mantle. Contamination and mixing processes are suspected. Lavas of similar composition are found in other volcanic centres of the Adamawa plateau and the continental and oceanic sectors of the Cameroon Volcanic Line, in particular the Kapsiki plateau, Mounts Cameroon and Bamenda.
文摘Geoelectric data obtained from forty (40) vertical electrical soundings collected with a Schlumberger device in the Adamawa plateau region, also known as the Cameroon water tower, have been treated by the least-squares inversion method. In order to study the nature and thickness of the aquifer and the necessary geoelectric parameters, quantitative and qualitative interpretations of the data were made. The results obtained showed that: about four to five geoelectric layers have been delimited in the study area with a dominance of the KH curve, which can be used as a reference for future studies. The first two layers constitute an association of clay and laterite with resistivity values ranging from 58 to 9122 Ω·m and whose thickness is between 0.6 and 13.4 m. The third layer is a potentially aquiferous laterite composed of clay, laterite and especially clay sand and cracked/good granite, with a dominance of sandy alteration whose resistivity values are between 81 and 960 Ω·m and its thickness between 12.2 and 26.8 m. The fourth and fifth layers are made up of cracked/good granite with a resistivity ranging from 12-10705 Ω·m with an average value of 1817 Ω·m. This study also shows that the North-East, South-West and South sectors could be the groundwater convergence zones and that the average depth of the basement aquifer roof is about 28.3 m. The geoelectric sections of certain demarcated vertical electrical sounding stations are consistent with the geologic description of the area.
