Deep shale gas(3500-4500 m)will be the important succeeding field for the growth of shale gas production in China.Under the condition of high temperature and high pressure in deep shale gas reservoirs,its gas occurren...Deep shale gas(3500-4500 m)will be the important succeeding field for the growth of shale gas production in China.Under the condition of high temperature and high pressure in deep shale gas reservoirs,its gas occurrence characteristics are markedly different from those of medium and shallow layers.To elucidate the gas occurrence characteristics and controlling factors of deep shales in the Wufeng-Longmaxi Formation,methane adsorption,low-temperature N2,and cO2 adsorption experi-ments were conducted.The results show that in deep shales,the mesopores provide approximately 75%of the total specific surface area(SA)and 90%of the total pore volume(PV).Based on two hypotheses and comparing the theoretical and actual adsorption capacity,it is speculated that methane is adsorbed in deep shale in the form of micropore filling,and free gas is mainly stored in the mesopores.Correlation analysis demonstrated that ToC is the key material constraint for the adsorption capacity of deep shale,and micropore SSA is the key spatial constraint.Other minerals and mesopore parameters have limited effect on the amount of adsorbed gas.Moreover,the free gas content ranges from 2.72 m^(3)/t to 6.20 m^(3)/t,with an average value of 4.60 m^(3)/t,and the free gas content ratio is approximately 58%,suggesting that the deep shale gas reservoirs are dominated by free gas.This ratio may also increase to approximately 70%when considering the formation temperature effect on adsorbed gas.Gas density,porosity,and gas saturation are the main controlling factors of free gas content,resulting in significantly larger free gas content in deep shale than in shallower formations.展开更多
Gas sorption and non-Darcy flow are two important issues for shale gas reservoirs. The sorption consists of dissolution and adsorption. Dissolved gas and adsorbed gas are different. The former is dissolved in the shal...Gas sorption and non-Darcy flow are two important issues for shale gas reservoirs. The sorption consists of dissolution and adsorption. Dissolved gas and adsorbed gas are different. The former is dissolved in the shale matrix, while the latter is concentrated near the solid walls of pores. In this paper, the Langmuir equation is used to describe adsorption and Henry’s law is used to describe dissolution. The K coefficient in Henry’s law of 0.052 mmol/(MPa g TOC) is obtained by matching experimental data. The amount of dissolved gas increases linearly when pressure increases. Using only the Langmuir equation without considering dissolution can lead to a significant underestimation of the amount of sorbed gas in shales. For non-Darcy gas flow, the apparent permeability model for free gas is established by combining slip flow and Knudsen flow. For adsorbed gas, the surface diffusion effect is also considered in this model. The surface diffu- sion coefficient is suggested to be of the same scale as the gas self-diffusion coefficient, and the corresponding effective permeability is derived. When 1/ increases,k_(app)/ k_D increases, but the relationship is not linear as the Klinkenberg effect suggests. The effect of adsorption on the gas flow is significant in nanopores (r≤2 nm). Adsorption increases apparent permeability in shales at low pressures and decreases it at high pressures.展开更多
基金funded by a PetroChina Basic Technology Research Project(No.2021DJ1905).
文摘Deep shale gas(3500-4500 m)will be the important succeeding field for the growth of shale gas production in China.Under the condition of high temperature and high pressure in deep shale gas reservoirs,its gas occurrence characteristics are markedly different from those of medium and shallow layers.To elucidate the gas occurrence characteristics and controlling factors of deep shales in the Wufeng-Longmaxi Formation,methane adsorption,low-temperature N2,and cO2 adsorption experi-ments were conducted.The results show that in deep shales,the mesopores provide approximately 75%of the total specific surface area(SA)and 90%of the total pore volume(PV).Based on two hypotheses and comparing the theoretical and actual adsorption capacity,it is speculated that methane is adsorbed in deep shale in the form of micropore filling,and free gas is mainly stored in the mesopores.Correlation analysis demonstrated that ToC is the key material constraint for the adsorption capacity of deep shale,and micropore SSA is the key spatial constraint.Other minerals and mesopore parameters have limited effect on the amount of adsorbed gas.Moreover,the free gas content ranges from 2.72 m^(3)/t to 6.20 m^(3)/t,with an average value of 4.60 m^(3)/t,and the free gas content ratio is approximately 58%,suggesting that the deep shale gas reservoirs are dominated by free gas.This ratio may also increase to approximately 70%when considering the formation temperature effect on adsorbed gas.Gas density,porosity,and gas saturation are the main controlling factors of free gas content,resulting in significantly larger free gas content in deep shale than in shallower formations.
基金supported by the Department of Energy under Award Number DE-FE0024311
文摘Gas sorption and non-Darcy flow are two important issues for shale gas reservoirs. The sorption consists of dissolution and adsorption. Dissolved gas and adsorbed gas are different. The former is dissolved in the shale matrix, while the latter is concentrated near the solid walls of pores. In this paper, the Langmuir equation is used to describe adsorption and Henry’s law is used to describe dissolution. The K coefficient in Henry’s law of 0.052 mmol/(MPa g TOC) is obtained by matching experimental data. The amount of dissolved gas increases linearly when pressure increases. Using only the Langmuir equation without considering dissolution can lead to a significant underestimation of the amount of sorbed gas in shales. For non-Darcy gas flow, the apparent permeability model for free gas is established by combining slip flow and Knudsen flow. For adsorbed gas, the surface diffusion effect is also considered in this model. The surface diffu- sion coefficient is suggested to be of the same scale as the gas self-diffusion coefficient, and the corresponding effective permeability is derived. When 1/ increases,k_(app)/ k_D increases, but the relationship is not linear as the Klinkenberg effect suggests. The effect of adsorption on the gas flow is significant in nanopores (r≤2 nm). Adsorption increases apparent permeability in shales at low pressures and decreases it at high pressures.
