A novel A1-Ti-C master alloy containing A14C3 and TiC particle clusters, which exhibits great refining potential for Mg, was prepared. With the addition of 2% A1-Ti-C master alloy, the grains transform to equiaxed cry...A novel A1-Ti-C master alloy containing A14C3 and TiC particle clusters, which exhibits great refining potential for Mg, was prepared. With the addition of 2% A1-Ti-C master alloy, the grains transform to equiaxed crystal with a diameter of （110-a：17） ~tm. The results indicate that A14C3 and TiC particle cluster, rather than a single particle, plays an important role in the refining process. Compared with the simplex smooth nucleating substrate, concave regions on the particle cluster provide easier route for the transformation from liquid Mg atoms to stable nucleus. Nucleus with a small size can also reach the critical nucleation radius when they attach on the concave regions of the substrate. A14C3 and TiC particle clusters thus become more favorable nucleating substrate for a-Mg grains.展开更多
Al-Ti-C master alloy was prepared by SHS (Self-propagating High temperature Synthesis)-melting technique. Effect of yttrium addition level on the microstructures of the master alloy was studied by XRD, SEM and EDS. Th...Al-Ti-C master alloy was prepared by SHS (Self-propagating High temperature Synthesis)-melting technique. Effect of yttrium addition level on the microstructures of the master alloy was studied by XRD, SEM and EDS. The experimental results show that the addition of 1.0% Y is beneficial to the formation of TiC particles; Al-Ti-C-1.0Y consists of rod-like and blocky TiAl3, TiC, Al3Y and α-Al matrix. Y is found around TiC particles in Al-Ti-C-0.5Y master alloy while blocky (AlTiY) phase appears in Al-Ti-C-1.0Y master alloy. Al3Y with dendritic morphology and small blocky Al2Y except for TiC are found in Al-Ti-C-2-0Y master alloy.展开更多
The modification effect of a new type of Al-P master alloy on Al-24Si alloys was investigated. It is found that excellent modification effect can be obtained by the addition of this new type of Al-P master alloy into ...The modification effect of a new type of Al-P master alloy on Al-24Si alloys was investigated. It is found that excellent modification effect can be obtained by the addition of this new type of Al-P master alloy into Al-24Si melt and the average primary Si grain size is decreased below 47 μm from original 225 μm. It is also found that the TiC particles in the melt coming from Al8Ti2C can improve the modification effect of the Al-P master alloy. When the content of TiC particles in the Al-24Si melt is 0.03%, the improvement reaches the maximum and keeps steady with increasing content of TiC particles. Modification effect occurs at 50 min after the addition of the Al-P master alloy and TiC particles, and keeps stable with prolonging holding time.展开更多
New Al4C3-containing Al-Ti-C master alloys (Al-0.6Ti-1C and Al-1Ti-1C) were developed by introducing Ti element into Al-C melt using melt reaction method,in which most of the TiC particles distribute around Al4C3 part...New Al4C3-containing Al-Ti-C master alloys (Al-0.6Ti-1C and Al-1Ti-1C) were developed by introducing Ti element into Al-C melt using melt reaction method,in which most of the TiC particles distribute around Al4C3 particles. It is believed that most of the C firstly reacts with Al melt and form Al4C3 particles by the reaction Al(l)+C(s)→Al4C3(s),and after adding Ti into the Al-C melt,the size of Al4C3 particles is decreased and the distribution of Al4C3 is improved through the reaction Ti(solute)+Al4C3(s)→ TiC(s)+Al(l). With the addition of 1% Al-1Ti-1C master alloy,the average grain size of AZ31 is reduced sharply from 850 μm to 200 μm,and the grain morphology of α-Mg transits from a fully-developed equiaxed dendritic structure to a petal-like shape. Al-C-O-Mn-Fe compounds are proposed to be potent nucleating substrates for primary Mg. Appropriate addition of Ti is believed to increase the grain refinement efficiency of Al4C3-containing Al-Ti-C master alloys in AZ31 alloy.展开更多
An investigation was carried out on the reaction process and mechanism between K 2TiF 6, graphite powder and aluminum melt with the common Ti concentration of 5%～7% in the grain refiner Al Ti C master alloys and the ...An investigation was carried out on the reaction process and mechanism between K 2TiF 6, graphite powder and aluminum melt with the common Ti concentration of 5%～7% in the grain refiner Al Ti C master alloys and the reaction temperature of 750～950 ℃, aiming at understanding their reaction mechanism and putting forward the aluminothermal reduction reaction method to practical use. During experimental investigation, K 2TiF 6 and graphite wrapped in aluminum foils were introduced into the aluminum melt at 850 ℃. Samples of alloy and slag were investigated by chemical analysis, XRD examination, SEM observation, and EDS analysis as well. It was found that the reaction was very vigorous at the beginning of the process and then reached a dynamic equilibrium. There were 3 particular reactions during the aluminothermal reaction process. At the beginning stage of the reaction, there emerged the phases of TiC and one type of metastable intermetallic phase TiAl 9 as well as TiAl 3 in aluminum melt. At the late stage of the reaction, the metastable phase TiAl 9 disappeared and another phase of Al 4C 3 emerged.展开更多
The microstructure and microhardness of a cast Al-10wt%Mg （henceforth Al-10Mg） alloy with 0.2wt% addition of Al- 5Ti-0.25C master alloy were compared with those of a refiner-free alloy of similar chemical compositio...The microstructure and microhardness of a cast Al-10wt%Mg （henceforth Al-10Mg） alloy with 0.2wt% addition of Al- 5Ti-0.25C master alloy were compared with those of a refiner-free alloy of similar chemical composition. It was found that this level of the master alloy addition not only caused an effective grain refinement, but also caused a significant increase in the microhardness of the Al-10Mg alloy. Microchemical analysis revealed that TiC particles existed in the grain center. The relationship between the holding time and grain size was also studied. It shows that the grain refining efficiency is faded observably with the holding time. This is explained in terms of the instability of TiC particles.展开更多
Al-Ti-C-Y master alloy was prepared by combining SHS technique and melting-casting method. The microstructure of master alloy and its grain-refining effect on AZ31 alloy were investigated by means of OM, XRD, SEM and ...Al-Ti-C-Y master alloy was prepared by combining SHS technique and melting-casting method. The microstructure of master alloy and its grain-refining effect on AZ31 alloy were investigated by means of OM, XRD, SEM and EDS. Experimental results indicated that the prepared master alloy consisted of α-Al, TiAl3, TiC and Al3Y phases, and exhibited good grain-refining performance of AZ31 alloy. Morphology of α-Mg changed from coarse dendritic to free equiaxed and the average grain size of α-Mg matrix reduced from the original 580 to 170 μm after adding 1.0 wt.% master alloy. The grain refining efficiency of Al-Ti-C-Y master alloy on AZ31 alloy was mainly attributed to heterogeneous nucleation of TiC particles and grain growth restriction of Al-Y compound or TiC at grain boundaries.展开更多
The grain reifnement limits of commercial pure Al inoculated by Al-5Ti-1B, Al-5Ti-0.25C and Al-5Ti-0.3C-0.2B master al oys were studied, and the inlfuence of melting temperature on the grain reifning performance of th...The grain reifnement limits of commercial pure Al inoculated by Al-5Ti-1B, Al-5Ti-0.25C and Al-5Ti-0.3C-0.2B master al oys were studied, and the inlfuence of melting temperature on the grain reifning performance of these three master al oys was investigated using a high scope video microscope （HSVM）, a ifeld-emission scanning electron microscope （FESEM）, an electron probe micro-analyzer （EPMA） and X-ray diffraction （XRD） method. Results show that there is a grain reifnement limit of commercial pure Al reifned by these three master al oys; with the same addition level of 1.5% under the present experimental conditions, the grain reifnement limits （smal est average grain size） of commercial pure Al reifned by Al-5Ti-1B, Al-5Ti-0.25C and Al-5Ti-0.3C-0.2B master al oys are 50 μm, 80 μm and 80 μm, respectively. In addition, with an increase in the melting temperature of the pure Al, the grain reifning performance of Al-5Ti-1B and Al-5Ti-0.25C master al oys decreases, but the grain reifning performance of Al-5Ti-0.3C-0.2B changes little.展开更多
Al Ti C master alloys have been prepared with a novel production method. A combination of X ray phase analysis, SEM and EDS was used to examine the phases and microstructures of the master alloys. The master alloys ha...Al Ti C master alloys have been prepared with a novel production method. A combination of X ray phase analysis, SEM and EDS was used to examine the phases and microstructures of the master alloys. The master alloys have block like Al 3Ti particles and submicron size TiC X with X ranging from 0.49 to 0.78 and show excellent grain refining performance for commercially pure aluminum. Titanium carbides were observed at the crystallization centers in refined castings.展开更多
Al-3B master alloy is a kind of efficient grain refiner for hypoeutectic Al-Si alloys. Experiments were carried out to evaluate the effect of undissolved AlB2 particles in Al-3B master alloy on the grain refinement of...Al-3B master alloy is a kind of efficient grain refiner for hypoeutectic Al-Si alloys. Experiments were carried out to evaluate the effect of undissolved AlB2 particles in Al-3B master alloy on the grain refinement of Al-7Si. It is found that the number and the settlement of AlB2 particles in the melt all have effect on the grain refining efficiency. On the basis of experiments and theoretical analysis, a new grain refinement mechanism was proposed to explain the grain refinement action of Al-3B on hypoeutectic Al-Si alloys. The formation of ＇Al-AlB2＇ shell structure is the direct reason for grain refinement and the undissolved AlB2 particles is the indirect nucleating base for subsequent α（Al） phase.展开更多
V-Ti-Fe master alloys were prepared by metaUothermic reduction method, and the influences of the mass ratio of V205 to TiO2, Al and Al-Mg alloy addition amounts on the metal recovery rates and alloy compositions were ...V-Ti-Fe master alloys were prepared by metaUothermic reduction method, and the influences of the mass ratio of V205 to TiO2, Al and Al-Mg alloy addition amounts on the metal recovery rates and alloy compositions were investigated. The results show that appropriate technological parameters are： the mass ratio of V205 to TiO2 is 0.5：1, Al addition represents 95% of the theoretical value, and the Al-Mg alloy addition amount is one third that of the Al addition. The results from energy spectrum analysis show that V and Fe distribute uniformly in the prepared alloy, while the segregation for Ti, i.e. Ti-rich phase is detected. A spray refming process was carried out to reduce the impurity contents of Al and O in the prepared alloys. The Al content drops from 4.27% to 1.86%, and the O content drops from 2.10% to 0.91% after the refining process.展开更多
Al-5C master alloy was prepared by powder in situ synthesis process, and its effects on grain refinement of AZ31 alloy and refining mechanism were investigated. The results indicate that the AI 5C master alloy consist...Al-5C master alloy was prepared by powder in situ synthesis process, and its effects on grain refinement of AZ31 alloy and refining mechanism were investigated. The results indicate that the AI 5C master alloy consists of a（Al） and A14C3 phases, and the size distribution of Al4C3 particles is controlled by sintering time. The AI 5C master alloy can remarkably reduce the grain size of AZ31 alloy, which decreases with the increasing addition amount of AI-SC master alloy when the addition amount is below 2%. The refining mechanism is attributed to the formation of new compounds of Al-C-Mnparticles by Al4C3 and Mn, which might act as nucleating substrates for a-Mg grain.展开更多
Mg-Al-Pb alloy is one of the newly developed materials for the seawater activated batteries. As-cast Mg-6Al-5Pb and Mg-6Al-5Pb-0.5Mn alloys with different additions of Al-15%Mn （mass fraction）, Al-30%Mn and Al-50%Mn...Mg-Al-Pb alloy is one of the newly developed materials for the seawater activated batteries. As-cast Mg-6Al-5Pb and Mg-6Al-5Pb-0.5Mn alloys with different additions of Al-15%Mn （mass fraction）, Al-30%Mn and Al-50%Mn master alloys were prepared by melting and casting. Their microstructures were observed by optical microscopy and scanning electron microscopy. The electrochemical properties, hydrogen evolution and mass loss of Mg-6Al-5Pb-0.5Mn alloys were studied. The results show that Mg-6Al-5Pb-0.5Mn alloy added with Al-50%Mn master alloy provides more negative corrosion average potential （-1.66 V）, smaller corrosion current density （7 μm/cm2） and lower free corrosion rate （0.51 mg·cm-2·h-1） than other alloys. This is probably attributed to the presence of Al11Mn4 phase, which facilitates the self-peeling of corrosion products and enlarges the electrochemical reaction area as well as enhances the electrochemical activity.展开更多
The microstructure evolution of Al–Sr master alloy during continuous extrusion was investigated using X-ray diffractometer, scanning electron microscope and transmission electron microscope. Results indicate that t...The microstructure evolution of Al–Sr master alloy during continuous extrusion was investigated using X-ray diffractometer, scanning electron microscope and transmission electron microscope. Results indicate that the continuous extrusion process could change the Al4Sr particles of the alloy significantly in size and morphology. The as-cast needle-like Al4Sr particles are broken into small blocks in upsetting zone and crushed heavily in adhesion zone. Plenty of dislocations get tangled up in right-angle bending zone. Al4Sr particles grow in the extending zone. Finally, Al4Sr particles in products are approximately 28 μm in length. Al2Sr particles precipitate during the process. Compared with products by horizontal extrusion, Al4Sr particles by continuous extrusion are finer and distribute more evenly.展开更多
Al-1.0%Sc-1.0%Zr （mass fraction） master alloy was prepared at different cooling rates. The morphology and thermodynamics data of the primary particles of the master alloy were investigated by X-ray diffraction （XRD...Al-1.0%Sc-1.0%Zr （mass fraction） master alloy was prepared at different cooling rates. The morphology and thermodynamics data of the primary particles of the master alloy were investigated by X-ray diffraction （XRD）, scanning electron microscopy （SEM） and differential scanning calorimetry （DSC）. It shows that the primary particles are dendrite-shaped particles comprised of several attached small cubic, cusped-cubic or crucifer shape particles at slow cooling rate. However, the primary particles are separated with crucifer shape at intermediate cooling rate, and they are cubic with cusped-cubic shape at high cooling rate. Meanwhile, the separated and attached particles present AlaSc/AlaZr1-xScx core-shell structure. The formation mechanism of the structure was systematically investigated by a mathematical model.展开更多
Two mixing techniques,the immersion method and the vortex method,were adopted in the production of Al-3%B master alloys since the generally used production route involving the direct addition of KBF4 salt to molten al...Two mixing techniques,the immersion method and the vortex method,were adopted in the production of Al-3%B master alloys since the generally used production route involving the direct addition of KBF4 salt to molten aluminum has several drawbacks.The experimental results demonstrate that the Al-B master alloys produced by the immersion method show a microstructure characterized by the appearances of AlB12 phase and many agglomerations of boride particles,while the Al-B master alloy produced by the vortex method exhibits a well dispersed microstructure of AlB2 particles in the matrix.The distinct microstructure features result from the differences in the stirring speed during the salt additions and the average size of the salt droplets achieved by the salt additions.展开更多
An Al-Si-P master alloy has been developed by an in-situ reaction and the electron probe microanalyzer （EPMA） results show that there are many pre-formed AlP particles contained in the master alloy. Silicon introduc...An Al-Si-P master alloy has been developed by an in-situ reaction and the electron probe microanalyzer （EPMA） results show that there are many pre-formed AlP particles contained in the master alloy. Silicon introduced into the system plays an important role in remarkably improving the distribution and content of AlP particles due to their similar crystal structure and lattice parameters. ZL109 alloys have shown fast modification response to the addition of 0.5% Al-15Si-3.5P master alloy at 720℃, with a mass of primary Si precipitating in size of about 15 μm. Also, coarse primary Si grains in AI-30Si alloy can be refined dramatically from 150 μm to 37 μm after the addition of 2.0% Al-15Si-3.5P master alloy at 850℃. The P recovery of the Al-15Si-3.5P master alloy is much higher than that of a Cu-8.5P master alloy due to the pre-formed AlP particles.展开更多
In this study, grain refining effect of Al-1.5℃ master alloy was examined on an AZ63B magnesium alloy, and the refining mechanism was studied through investigating the role of C and Fe in this process. The results sh...In this study, grain refining effect of Al-1.5℃ master alloy was examined on an AZ63B magnesium alloy, and the refining mechanism was studied through investigating the role of C and Fe in this process. The results show that addition of Al-1.5℃ master alloy leads to significant decrease of the mean grain size from about 270μm to 50μm at the center of the AZ63 alloy ingot. Grain refinement by carbon addition is mainly due to the heterogeneity nucleation on the Al-, C-, O-, Fe- and Mn-rich particles, but not constitutional undercooling caused by the carbon solute element. Fe plays an important role in the formation of the nucleating particles, but not acts as an inhibiting element.展开更多
Al Sr master alloy was prepared by using liquid aluminum cathode and a mixture of Na 3AlF 6 - SrCO 3 as the basic molten salt electrolyte in a laboratory electrolysis cell.The effects of electrolyte compositi...Al Sr master alloy was prepared by using liquid aluminum cathode and a mixture of Na 3AlF 6 - SrCO 3 as the basic molten salt electrolyte in a laboratory electrolysis cell.The effects of electrolyte composition,electrolysis temperature,cathodic current density and the electrolytic duration on Sr content of Al Sr alloy were studied.Through laboratory experiments,the parameters for smooth electrolytic reaction were proposed.展开更多
In this article, a novel Al-6Zr-2P master alloy with ZrP particles was successfully synthesized, and the refining performance of this novel master alloy for the primary Si in Cu-50Si alloys was also investigated. By m...In this article, a novel Al-6Zr-2P master alloy with ZrP particles was successfully synthesized, and the refining performance of this novel master alloy for the primary Si in Cu-50Si alloys was also investigated. By means of the fracture plane observation, it is found that the ZrP phase would precipitate first in the solidification pro- cess, and then, the ZrAl3 phase grows around them. Fur- thermore, it is observed that the refining effect can be remarkably improved by changing the addition sequence of the raw materials. After the melting of commercial Cu, the 2.0 wt% Al-6Zr-2P master alloy and crystalline Si were added in sequence, and the mean size of the primary Si in Cu-50Si alloy can be significantly refined from 255.7 to 75.3 gm. Meanwhile, the refining mechanism was dis- cussed in detail.展开更多
基金Project(DUT15JJ(G)01) supported by the Fundamental Research Funds for the Central Universities,ChinaProject(2009AA03Z525) supported by the National High-tech Research and Development Program of China
文摘A novel A1-Ti-C master alloy containing A14C3 and TiC particle clusters, which exhibits great refining potential for Mg, was prepared. With the addition of 2% A1-Ti-C master alloy, the grains transform to equiaxed crystal with a diameter of （110-a：17） ~tm. The results indicate that A14C3 and TiC particle cluster, rather than a single particle, plays an important role in the refining process. Compared with the simplex smooth nucleating substrate, concave regions on the particle cluster provide easier route for the transformation from liquid Mg atoms to stable nucleus. Nucleus with a small size can also reach the critical nucleation radius when they attach on the concave regions of the substrate. A14C3 and TiC particle clusters thus become more favorable nucleating substrate for a-Mg grains.
基金Project supported by Natural Science Foundation of Shanxi Province (2007011067)
文摘Al-Ti-C master alloy was prepared by SHS (Self-propagating High temperature Synthesis)-melting technique. Effect of yttrium addition level on the microstructures of the master alloy was studied by XRD, SEM and EDS. The experimental results show that the addition of 1.0% Y is beneficial to the formation of TiC particles; Al-Ti-C-1.0Y consists of rod-like and blocky TiAl3, TiC, Al3Y and α-Al matrix. Y is found around TiC particles in Al-Ti-C-0.5Y master alloy while blocky (AlTiY) phase appears in Al-Ti-C-1.0Y master alloy. Al3Y with dendritic morphology and small blocky Al2Y except for TiC are found in Al-Ti-C-2-0Y master alloy.
文摘The modification effect of a new type of Al-P master alloy on Al-24Si alloys was investigated. It is found that excellent modification effect can be obtained by the addition of this new type of Al-P master alloy into Al-24Si melt and the average primary Si grain size is decreased below 47 μm from original 225 μm. It is also found that the TiC particles in the melt coming from Al8Ti2C can improve the modification effect of the Al-P master alloy. When the content of TiC particles in the Al-24Si melt is 0.03%, the improvement reaches the maximum and keeps steady with increasing content of TiC particles. Modification effect occurs at 50 min after the addition of the Al-P master alloy and TiC particles, and keeps stable with prolonging holding time.
基金Project(50625101) supported by the National Natural Science Foundation for Distinguished Young Scholars of ChinaProject(106103) supported by Key Project of Science and Technology Research of Ministry of Education of China
文摘New Al4C3-containing Al-Ti-C master alloys (Al-0.6Ti-1C and Al-1Ti-1C) were developed by introducing Ti element into Al-C melt using melt reaction method,in which most of the TiC particles distribute around Al4C3 particles. It is believed that most of the C firstly reacts with Al melt and form Al4C3 particles by the reaction Al(l)+C(s)→Al4C3(s),and after adding Ti into the Al-C melt,the size of Al4C3 particles is decreased and the distribution of Al4C3 is improved through the reaction Ti(solute)+Al4C3(s)→ TiC(s)+Al(l). With the addition of 1% Al-1Ti-1C master alloy,the average grain size of AZ31 is reduced sharply from 850 μm to 200 μm,and the grain morphology of α-Mg transits from a fully-developed equiaxed dendritic structure to a petal-like shape. Al-C-O-Mn-Fe compounds are proposed to be potent nucleating substrates for primary Mg. Appropriate addition of Ti is believed to increase the grain refinement efficiency of Al4C3-containing Al-Ti-C master alloys in AZ31 alloy.
文摘An investigation was carried out on the reaction process and mechanism between K 2TiF 6, graphite powder and aluminum melt with the common Ti concentration of 5%～7% in the grain refiner Al Ti C master alloys and the reaction temperature of 750～950 ℃, aiming at understanding their reaction mechanism and putting forward the aluminothermal reduction reaction method to practical use. During experimental investigation, K 2TiF 6 and graphite wrapped in aluminum foils were introduced into the aluminum melt at 850 ℃. Samples of alloy and slag were investigated by chemical analysis, XRD examination, SEM observation, and EDS analysis as well. It was found that the reaction was very vigorous at the beginning of the process and then reached a dynamic equilibrium. There were 3 particular reactions during the aluminothermal reaction process. At the beginning stage of the reaction, there emerged the phases of TiC and one type of metastable intermetallic phase TiAl 9 as well as TiAl 3 in aluminum melt. At the late stage of the reaction, the metastable phase TiAl 9 disappeared and another phase of Al 4C 3 emerged.
基金This work was financially supported by the National Natural Science Foundation of China (No. 50231040).
文摘The microstructure and microhardness of a cast Al-10wt%Mg （henceforth Al-10Mg） alloy with 0.2wt% addition of Al- 5Ti-0.25C master alloy were compared with those of a refiner-free alloy of similar chemical composition. It was found that this level of the master alloy addition not only caused an effective grain refinement, but also caused a significant increase in the microhardness of the Al-10Mg alloy. Microchemical analysis revealed that TiC particles existed in the grain center. The relationship between the holding time and grain size was also studied. It shows that the grain refining efficiency is faded observably with the holding time. This is explained in terms of the instability of TiC particles.
基金the Natural Science Foundation of Shanxi Province (2007011067)Patent Generalization Project of Shanxi Province (051025)
文摘Al-Ti-C-Y master alloy was prepared by combining SHS technique and melting-casting method. The microstructure of master alloy and its grain-refining effect on AZ31 alloy were investigated by means of OM, XRD, SEM and EDS. Experimental results indicated that the prepared master alloy consisted of α-Al, TiAl3, TiC and Al3Y phases, and exhibited good grain-refining performance of AZ31 alloy. Morphology of α-Mg changed from coarse dendritic to free equiaxed and the average grain size of α-Mg matrix reduced from the original 580 to 170 μm after adding 1.0 wt.% master alloy. The grain refining efficiency of Al-Ti-C-Y master alloy on AZ31 alloy was mainly attributed to heterogeneous nucleation of TiC particles and grain growth restriction of Al-Y compound or TiC at grain boundaries.
基金financially supported by the National Natural Science Foundation of China(No.51071097)
文摘The grain reifnement limits of commercial pure Al inoculated by Al-5Ti-1B, Al-5Ti-0.25C and Al-5Ti-0.3C-0.2B master al oys were studied, and the inlfuence of melting temperature on the grain reifning performance of these three master al oys was investigated using a high scope video microscope （HSVM）, a ifeld-emission scanning electron microscope （FESEM）, an electron probe micro-analyzer （EPMA） and X-ray diffraction （XRD） method. Results show that there is a grain reifnement limit of commercial pure Al reifned by these three master al oys; with the same addition level of 1.5% under the present experimental conditions, the grain reifnement limits （smal est average grain size） of commercial pure Al reifned by Al-5Ti-1B, Al-5Ti-0.25C and Al-5Ti-0.3C-0.2B master al oys are 50 μm, 80 μm and 80 μm, respectively. In addition, with an increase in the melting temperature of the pure Al, the grain reifning performance of Al-5Ti-1B and Al-5Ti-0.25C master al oys decreases, but the grain reifning performance of Al-5Ti-0.3C-0.2B changes little.
文摘Al Ti C master alloys have been prepared with a novel production method. A combination of X ray phase analysis, SEM and EDS was used to examine the phases and microstructures of the master alloys. The master alloys have block like Al 3Ti particles and submicron size TiC X with X ranging from 0.49 to 0.78 and show excellent grain refining performance for commercially pure aluminum. Titanium carbides were observed at the crystallization centers in refined castings.
基金Project supported by Tsinghua-Wuxi Science Foundation, China
文摘Al-3B master alloy is a kind of efficient grain refiner for hypoeutectic Al-Si alloys. Experiments were carried out to evaluate the effect of undissolved AlB2 particles in Al-3B master alloy on the grain refinement of Al-7Si. It is found that the number and the settlement of AlB2 particles in the melt all have effect on the grain refining efficiency. On the basis of experiments and theoretical analysis, a new grain refinement mechanism was proposed to explain the grain refinement action of Al-3B on hypoeutectic Al-Si alloys. The formation of ＇Al-AlB2＇ shell structure is the direct reason for grain refinement and the undissolved AlB2 particles is the indirect nucleating base for subsequent α（Al） phase.
基金Project (2006AA068128) supported by the High-tech Research and Development Program of China
文摘V-Ti-Fe master alloys were prepared by metaUothermic reduction method, and the influences of the mass ratio of V205 to TiO2, Al and Al-Mg alloy addition amounts on the metal recovery rates and alloy compositions were investigated. The results show that appropriate technological parameters are： the mass ratio of V205 to TiO2 is 0.5：1, Al addition represents 95% of the theoretical value, and the Al-Mg alloy addition amount is one third that of the Al addition. The results from energy spectrum analysis show that V and Fe distribute uniformly in the prepared alloy, while the segregation for Ti, i.e. Ti-rich phase is detected. A spray refming process was carried out to reduce the impurity contents of Al and O in the prepared alloys. The Al content drops from 4.27% to 1.86%, and the O content drops from 2.10% to 0.91% after the refining process.
基金Project(2011921065)supported by Liaoning BaiQianWan Talents Program,ChinaProject(DUT11ZD115)supported by the Fundamental Research Funds for the Central Universities,China
文摘Al-5C master alloy was prepared by powder in situ synthesis process, and its effects on grain refinement of AZ31 alloy and refining mechanism were investigated. The results indicate that the AI 5C master alloy consists of a（Al） and A14C3 phases, and the size distribution of Al4C3 particles is controlled by sintering time. The AI 5C master alloy can remarkably reduce the grain size of AZ31 alloy, which decreases with the increasing addition amount of AI-SC master alloy when the addition amount is below 2%. The refining mechanism is attributed to the formation of new compounds of Al-C-Mnparticles by Al4C3 and Mn, which might act as nucleating substrates for a-Mg grain.
基金Project(JPPT-115-168)supported by the National Key Science and Technological Project of ChinaProject(51101171)supported by the National Natural Science Foundation of China
文摘Mg-Al-Pb alloy is one of the newly developed materials for the seawater activated batteries. As-cast Mg-6Al-5Pb and Mg-6Al-5Pb-0.5Mn alloys with different additions of Al-15%Mn （mass fraction）, Al-30%Mn and Al-50%Mn master alloys were prepared by melting and casting. Their microstructures were observed by optical microscopy and scanning electron microscopy. The electrochemical properties, hydrogen evolution and mass loss of Mg-6Al-5Pb-0.5Mn alloys were studied. The results show that Mg-6Al-5Pb-0.5Mn alloy added with Al-50%Mn master alloy provides more negative corrosion average potential （-1.66 V）, smaller corrosion current density （7 μm/cm2） and lower free corrosion rate （0.51 mg·cm-2·h-1） than other alloys. This is probably attributed to the presence of Al11Mn4 phase, which facilitates the self-peeling of corrosion products and enlarges the electrochemical reaction area as well as enhances the electrochemical activity.
基金Project(51175055)supported by the National Natural Science Foundation of ChinaProject(LR2015011)supported by Program for Liaoning Excellent Talents in University,China
文摘The microstructure evolution of Al–Sr master alloy during continuous extrusion was investigated using X-ray diffractometer, scanning electron microscope and transmission electron microscope. Results indicate that the continuous extrusion process could change the Al4Sr particles of the alloy significantly in size and morphology. The as-cast needle-like Al4Sr particles are broken into small blocks in upsetting zone and crushed heavily in adhesion zone. Plenty of dislocations get tangled up in right-angle bending zone. Al4Sr particles grow in the extending zone. Finally, Al4Sr particles in products are approximately 28 μm in length. Al2Sr particles precipitate during the process. Compared with products by horizontal extrusion, Al4Sr particles by continuous extrusion are finer and distribute more evenly.
基金Project(2012CB619503)supported by the National Basic Research Program of ChinaProject(2013AA031001)supported by the National High-tech Research and Development Program of ChinaProject(2012DFA50630)supported by the International Science and Technology Cooperation Program of China
文摘Al-1.0%Sc-1.0%Zr （mass fraction） master alloy was prepared at different cooling rates. The morphology and thermodynamics data of the primary particles of the master alloy were investigated by X-ray diffraction （XRD）, scanning electron microscopy （SEM） and differential scanning calorimetry （DSC）. It shows that the primary particles are dendrite-shaped particles comprised of several attached small cubic, cusped-cubic or crucifer shape particles at slow cooling rate. However, the primary particles are separated with crucifer shape at intermediate cooling rate, and they are cubic with cusped-cubic shape at high cooling rate. Meanwhile, the separated and attached particles present AlaSc/AlaZr1-xScx core-shell structure. The formation mechanism of the structure was systematically investigated by a mathematical model.
基金Project(u0837601)supported by the National Natural Science Foundation of China
文摘Two mixing techniques,the immersion method and the vortex method,were adopted in the production of Al-3%B master alloys since the generally used production route involving the direct addition of KBF4 salt to molten aluminum has several drawbacks.The experimental results demonstrate that the Al-B master alloys produced by the immersion method show a microstructure characterized by the appearances of AlB12 phase and many agglomerations of boride particles,while the Al-B master alloy produced by the vortex method exhibits a well dispersed microstructure of AlB2 particles in the matrix.The distinct microstructure features result from the differences in the stirring speed during the salt additions and the average size of the salt droplets achieved by the salt additions.
基金supported by the National Science Fund for Distinguished Young Scholars (No. 50625101)the Key Project of Science and Technology Research of the Ministry of Education of China (No. 106103)
文摘An Al-Si-P master alloy has been developed by an in-situ reaction and the electron probe microanalyzer （EPMA） results show that there are many pre-formed AlP particles contained in the master alloy. Silicon introduced into the system plays an important role in remarkably improving the distribution and content of AlP particles due to their similar crystal structure and lattice parameters. ZL109 alloys have shown fast modification response to the addition of 0.5% Al-15Si-3.5P master alloy at 720℃, with a mass of primary Si precipitating in size of about 15 μm. Also, coarse primary Si grains in AI-30Si alloy can be refined dramatically from 150 μm to 37 μm after the addition of 2.0% Al-15Si-3.5P master alloy at 850℃. The P recovery of the Al-15Si-3.5P master alloy is much higher than that of a Cu-8.5P master alloy due to the pre-formed AlP particles.
基金supported by the National Natural Science Foundation of China(No.50171037)Natural Science Foundation of Shandong Province of China(No.Z2004F03).
文摘In this study, grain refining effect of Al-1.5℃ master alloy was examined on an AZ63B magnesium alloy, and the refining mechanism was studied through investigating the role of C and Fe in this process. The results show that addition of Al-1.5℃ master alloy leads to significant decrease of the mean grain size from about 270μm to 50μm at the center of the AZ63 alloy ingot. Grain refinement by carbon addition is mainly due to the heterogeneity nucleation on the Al-, C-, O-, Fe- and Mn-rich particles, but not constitutional undercooling caused by the carbon solute element. Fe plays an important role in the formation of the nucleating particles, but not acts as an inhibiting element.
文摘Al Sr master alloy was prepared by using liquid aluminum cathode and a mixture of Na 3AlF 6 - SrCO 3 as the basic molten salt electrolyte in a laboratory electrolysis cell.The effects of electrolyte composition,electrolysis temperature,cathodic current density and the electrolytic duration on Sr content of Al Sr alloy were studied.Through laboratory experiments,the parameters for smooth electrolytic reaction were proposed.
基金financially supported by the National Natural Science Foundation of China (No. 51202088)the Shandong Doctoral Foundation (BS2010CL005)+1 种基金the Doctoral Foundation (No. XBS1106)the Research Foundation of the University of Jinan (No. XKY1106)
文摘In this article, a novel Al-6Zr-2P master alloy with ZrP particles was successfully synthesized, and the refining performance of this novel master alloy for the primary Si in Cu-50Si alloys was also investigated. By means of the fracture plane observation, it is found that the ZrP phase would precipitate first in the solidification pro- cess, and then, the ZrAl3 phase grows around them. Fur- thermore, it is observed that the refining effect can be remarkably improved by changing the addition sequence of the raw materials. After the melting of commercial Cu, the 2.0 wt% Al-6Zr-2P master alloy and crystalline Si were added in sequence, and the mean size of the primary Si in Cu-50Si alloy can be significantly refined from 255.7 to 75.3 gm. Meanwhile, the refining mechanism was dis- cussed in detail.
