Silicoaluminophosphate（SAPO） molecular sieves doped with cobalt（Co-SAPO-5） were synthesized hydrothermally with different concentrations of Co.Each sample was characterized by X-ray diffraction,N2 adsorption-desor...Silicoaluminophosphate（SAPO） molecular sieves doped with cobalt（Co-SAPO-5） were synthesized hydrothermally with different concentrations of Co.Each sample was characterized by X-ray diffraction,N2 adsorption-desorption,scanning electron microscopy,ultraviolet-visible spectroscopy,temperature-programmed desorption of NH3（NH3-TPD）,and infrared spectrascopy of adsorbed pyridine（Py-IR）.The results showed that Co was highly dispersed in the Co-SAPO-5 samples.In addition,a part of the Co content had been incorporated into the SAPO-5 framework,while the remainder existed on the surface as extra-framework Co.The surface areas of the Co-SAOP-5 samples were similar to the SAPO-5 sample.However,the pore volumes of the Co-SAOP-5 samples were lower than that of the SAOP-5 sample.As the concentration of Co increased,the pore volume gradually decreased because extra-framework cobalt oxide was present on the catalyst surface.NH3-TPD and Py-IR results revealed that the amount of Br（？）nsted acid and the total amount of acid for the Co-SAPO-5 samples were higher than that for the SAPO-5 sample.These values were also higher for samples with higher Co content.The catalytic activity of the Co-SAPO-5 samples was evaluated for the oxidation of cyclohexane with molecular oxygen.When Co was added to the SAPO-5 catalyst,the catalytic activity of the Co-SAPO-5 catalysts improved.In addition,the conversion of cyclohexane increased as the Co content in the Co-SAPO-5 catalysts increased.However,with a high conversion of cyclohexane（6.30%）,the total selectivity of cyclohexanone（K） and cyclohexanol（A） decreased sharply.The K/A ratio ranged from 1.15 to 2.47.The effects of reaction conditions（i.e.,reaction temperature,reaction time,initial oxygen pressure,and the catalyst amount） on the performance of the Co-SAPO-5 catalysts have also been measured.Furthermore,the stability of the Co-SAPO-5 catalyst was explored and found to be good for the selective oxidation of cyclohexane by molecular oxygen.展开更多
Mesoporous molecular sieves, NbFAPO-5 and NbFAPSO-5 were hydrothermally synthesized with AlPO-5 type structure. Characterization of these molecular sieves was performed by X-ray diffraction to determine their structur...Mesoporous molecular sieves, NbFAPO-5 and NbFAPSO-5 were hydrothermally synthesized with AlPO-5 type structure. Characterization of these molecular sieves was performed by X-ray diffraction to determine their structure, ICP-EAS for their elemental composition and infrared spectrometry to access their acidic properties. X-ray diffraction patterns confirmed well AlPO-5 type structure. ICP-EAS analysis confirmed the incorporation of silicon (12.9%), aluminium (15.4%), phosphorous (21.9%), iron (5.62%) and niobium (0.39%) into AlPO-5 framework. Infrared spectrometry analysis showed that both Bronsted and Lewis sites were found in the synthesized samples. The presence of both Bronsted and Lewis acid site led to bifunctional function of NbFAPO-5 and NbFAPSO-5 molecular sieve in promoting both oxidation and esterification reactions. NbFAPSO-5 Bronsted acidity was higher than that of NbFAPO-5 and for Lewis acidity, NbFAPO-5 was higher than that of NbFAPO-5.展开更多
ZSM-5/MCM-41 composite molecular sieve was prepared by the nano-assembling method.The ZSM-5 molecular sieve,the MCM-41 molecular sieve,the ZSM-5/MCM-41 mechanical mixture and the ZSM-5/MCM-41 composite molecular sieve...ZSM-5/MCM-41 composite molecular sieve was prepared by the nano-assembling method.The ZSM-5 molecular sieve,the MCM-41 molecular sieve,the ZSM-5/MCM-41 mechanical mixture and the ZSM-5/MCM-41 composite molecular sieve were characterized by X-ray powder diffractometry,N_2 adsorption isotherms,temperature programmed desorption of ammonia and scanning electron microscopy and their properties were analyzed.Using FCC gasoline as the feed,activities of different molecular sieves for reducing olefin content were investigated in a continuous high-pressure micro-reactor unit under the following conditions:a reaction temperature of 400℃,a reaction time of 2 h,a weight hourly space velocity of 3h^(-1),and a reaction pressure of 2.0 MPa.The results showed that the HMCM-41 molecular sieve had low reaction performance,and the HZSM-5 molecular sieve demonstrated high aromatization activity,while the ZSM-5/MCM- 41 composite molecular sieve exhibited a best olefin-reducing performance because of its high isomerization activity and moderate aromatization activity.With a largest olefin-reducmg capability and a reasonable distribution of products,the composite molecular sieve was more suitable for FCC gasoline upgrading compared to other three catalysts.展开更多
The large pore molecular sieves VPI-5 and Si VPI-5 were synthesized by using three organic amines (dipropylamine, diisopropylamine and dipentylamine) as the structure-directing agents. Compared with general alumlnopho...The large pore molecular sieves VPI-5 and Si VPI-5 were synthesized by using three organic amines (dipropylamine, diisopropylamine and dipentylamine) as the structure-directing agents. Compared with general alumlnophosphate molecular sieves, the synthesis of the molecular sieves of VPI-5 type ls of many unique features. Both VPI-5 and Si-VPI-5 were characterized by XRD, IR, TG-DTA, and MAS-NMR.展开更多
The molecular sieve VPI-5 was synthesized by using various organic amines (DEA, Di-PA, DBA, DPenA, TBA, DEOA and TEOA) as the structure-directing agent. The use of DPA enlarged the range of the crystallization tempera...The molecular sieve VPI-5 was synthesized by using various organic amines (DEA, Di-PA, DBA, DPenA, TBA, DEOA and TEOA) as the structure-directing agent. The use of DPA enlarged the range of the crystallization temperature from 110℃ to 190℃ in the synthesis of VPI-5, while the use of TEOA changed the composition of the reactants in a broad variety. Diamines are the typical amines in the synthesis of VPI-5. Among them DBA and DPA are the most favorite structure-directing agents for the synthesis of VPI-5 molecular sieve.展开更多
A large single crystal of TPAF-AlPO4-5 molecular sieve was synthesized by hydrothermal crystallization in the presence of ammonium fluoride. Starting material composition was · 1 P2O5 · 1 Al2O3 · 2. 2 T...A large single crystal of TPAF-AlPO4-5 molecular sieve was synthesized by hydrothermal crystallization in the presence of ammonium fluoride. Starting material composition was · 1 P2O5 · 1 Al2O3 · 2. 2 TPAOH · 1. 7 NH4F ·318 H2O. The crystal size has a hexagonal prism with 80μm across and 500μm length.The structure of tetrapropylarnmonium fluoride - aluminium phosphate type-5 was investigated with X-ray diffraction. The unit cell composition is 12AlPO4 · TPAF, space group P6cc (a= 13. 740(5), c= 8. 474(4) A ). Average bond distances are: P-O 1. 564A and Al-O 1. 640A ,which may be due to the partial disorder of the arrangement of P, Al in the framework. The angles of O-T-O and T-O-T (T?P, Al) are 102-116° and 148-176°, respectively. Residue electron density was not well enough defined to give a precise position for tetrapropylammonium fluoride (TPAF). The template agent, TPA+ cations, situate in the 12-ring channels and F- anions locate in double 4-rings near the 12-ring channels. Fixing atomic positions for the TPAF reduced the unweighted and weighted R, R, from 0. 063 and 0. 082 to 0. 046 and 0. 042,respectively.展开更多
基金supported by the National Basic Research Program of China(2010CB732300)the National Natural Science Foundation of China(21103048)~~
文摘Silicoaluminophosphate（SAPO） molecular sieves doped with cobalt（Co-SAPO-5） were synthesized hydrothermally with different concentrations of Co.Each sample was characterized by X-ray diffraction,N2 adsorption-desorption,scanning electron microscopy,ultraviolet-visible spectroscopy,temperature-programmed desorption of NH3（NH3-TPD）,and infrared spectrascopy of adsorbed pyridine（Py-IR）.The results showed that Co was highly dispersed in the Co-SAPO-5 samples.In addition,a part of the Co content had been incorporated into the SAPO-5 framework,while the remainder existed on the surface as extra-framework Co.The surface areas of the Co-SAOP-5 samples were similar to the SAPO-5 sample.However,the pore volumes of the Co-SAOP-5 samples were lower than that of the SAOP-5 sample.As the concentration of Co increased,the pore volume gradually decreased because extra-framework cobalt oxide was present on the catalyst surface.NH3-TPD and Py-IR results revealed that the amount of Br（？）nsted acid and the total amount of acid for the Co-SAPO-5 samples were higher than that for the SAPO-5 sample.These values were also higher for samples with higher Co content.The catalytic activity of the Co-SAPO-5 samples was evaluated for the oxidation of cyclohexane with molecular oxygen.When Co was added to the SAPO-5 catalyst,the catalytic activity of the Co-SAPO-5 catalysts improved.In addition,the conversion of cyclohexane increased as the Co content in the Co-SAPO-5 catalysts increased.However,with a high conversion of cyclohexane（6.30%）,the total selectivity of cyclohexanone（K） and cyclohexanol（A） decreased sharply.The K/A ratio ranged from 1.15 to 2.47.The effects of reaction conditions（i.e.,reaction temperature,reaction time,initial oxygen pressure,and the catalyst amount） on the performance of the Co-SAPO-5 catalysts have also been measured.Furthermore,the stability of the Co-SAPO-5 catalyst was explored and found to be good for the selective oxidation of cyclohexane by molecular oxygen.
文摘Mesoporous molecular sieves, NbFAPO-5 and NbFAPSO-5 were hydrothermally synthesized with AlPO-5 type structure. Characterization of these molecular sieves was performed by X-ray diffraction to determine their structure, ICP-EAS for their elemental composition and infrared spectrometry to access their acidic properties. X-ray diffraction patterns confirmed well AlPO-5 type structure. ICP-EAS analysis confirmed the incorporation of silicon (12.9%), aluminium (15.4%), phosphorous (21.9%), iron (5.62%) and niobium (0.39%) into AlPO-5 framework. Infrared spectrometry analysis showed that both Bronsted and Lewis sites were found in the synthesized samples. The presence of both Bronsted and Lewis acid site led to bifunctional function of NbFAPO-5 and NbFAPSO-5 molecular sieve in promoting both oxidation and esterification reactions. NbFAPSO-5 Bronsted acidity was higher than that of NbFAPO-5 and for Lewis acidity, NbFAPO-5 was higher than that of NbFAPO-5.
文摘ZSM-5/MCM-41 composite molecular sieve was prepared by the nano-assembling method.The ZSM-5 molecular sieve,the MCM-41 molecular sieve,the ZSM-5/MCM-41 mechanical mixture and the ZSM-5/MCM-41 composite molecular sieve were characterized by X-ray powder diffractometry,N_2 adsorption isotherms,temperature programmed desorption of ammonia and scanning electron microscopy and their properties were analyzed.Using FCC gasoline as the feed,activities of different molecular sieves for reducing olefin content were investigated in a continuous high-pressure micro-reactor unit under the following conditions:a reaction temperature of 400℃,a reaction time of 2 h,a weight hourly space velocity of 3h^(-1),and a reaction pressure of 2.0 MPa.The results showed that the HMCM-41 molecular sieve had low reaction performance,and the HZSM-5 molecular sieve demonstrated high aromatization activity,while the ZSM-5/MCM- 41 composite molecular sieve exhibited a best olefin-reducing performance because of its high isomerization activity and moderate aromatization activity.With a largest olefin-reducmg capability and a reasonable distribution of products,the composite molecular sieve was more suitable for FCC gasoline upgrading compared to other three catalysts.
基金Supported by the National Natural Science Foundation of China
文摘The large pore molecular sieves VPI-5 and Si VPI-5 were synthesized by using three organic amines (dipropylamine, diisopropylamine and dipentylamine) as the structure-directing agents. Compared with general alumlnophosphate molecular sieves, the synthesis of the molecular sieves of VPI-5 type ls of many unique features. Both VPI-5 and Si-VPI-5 were characterized by XRD, IR, TG-DTA, and MAS-NMR.
基金Supported by the National Natural Science Foundation of China
文摘The molecular sieve VPI-5 was synthesized by using various organic amines (DEA, Di-PA, DBA, DPenA, TBA, DEOA and TEOA) as the structure-directing agent. The use of DPA enlarged the range of the crystallization temperature from 110℃ to 190℃ in the synthesis of VPI-5, while the use of TEOA changed the composition of the reactants in a broad variety. Diamines are the typical amines in the synthesis of VPI-5. Among them DBA and DPA are the most favorite structure-directing agents for the synthesis of VPI-5 molecular sieve.
文摘A large single crystal of TPAF-AlPO4-5 molecular sieve was synthesized by hydrothermal crystallization in the presence of ammonium fluoride. Starting material composition was · 1 P2O5 · 1 Al2O3 · 2. 2 TPAOH · 1. 7 NH4F ·318 H2O. The crystal size has a hexagonal prism with 80μm across and 500μm length.The structure of tetrapropylarnmonium fluoride - aluminium phosphate type-5 was investigated with X-ray diffraction. The unit cell composition is 12AlPO4 · TPAF, space group P6cc (a= 13. 740(5), c= 8. 474(4) A ). Average bond distances are: P-O 1. 564A and Al-O 1. 640A ,which may be due to the partial disorder of the arrangement of P, Al in the framework. The angles of O-T-O and T-O-T (T?P, Al) are 102-116° and 148-176°, respectively. Residue electron density was not well enough defined to give a precise position for tetrapropylammonium fluoride (TPAF). The template agent, TPA+ cations, situate in the 12-ring channels and F- anions locate in double 4-rings near the 12-ring channels. Fixing atomic positions for the TPAF reduced the unweighted and weighted R, R, from 0. 063 and 0. 082 to 0. 046 and 0. 042,respectively.
