CO_(2)hydrogenation is an attractive way to store and utilize carbon dioxide generated by industrial processes,as well as to produce valuable chemicals from renewable and abundant resources.Iron catalysts are commonly...CO_(2)hydrogenation is an attractive way to store and utilize carbon dioxide generated by industrial processes,as well as to produce valuable chemicals from renewable and abundant resources.Iron catalysts are commonly used for the hydrogenation of carbon oxides to hydrocarbons.Iron-molybdenum catalysts have found numerous applications in catalysis,but have been never evaluated in the CO_(2)hydrogenation.In this work,the structural properties of iron-molybdenum catalysts without and with a promoting alkali metal(Li,Na,K,Rb,or Cs)were characterized using X-ray diffraction,hydrogen temperatureprogrammed reduction,CO_(2)temperature-programmed desorption,in-situ^(57)Fe Mossbauer spectroscopy and operando X-ray adsorption spectroscopy.Their catalytic performance was evaluated in the CO_(2)hydrogenation.During the reaction conditions,the catalysts undergo the formation of an iron(Ⅱ)molybdate structure,accompanied by a partial reduction of molybdenum and carbidization of iron.The rate of CO_(2)conversion and product selectivity strongly depend on the promoting alkali metals,and electronegativity was identified as an important factor affecting the catalytic performance.Higher CO_(2)conversion rates were observed with the promoters having higher electronegativity,while low electronegativity of alkali metals favors higher light olefin selectivity.展开更多
The electronic structures and field emission properties of capped CNT55 systems with or without alkali metal atom adsorption were systematically investigated by density functional theory calculation.The results indica...The electronic structures and field emission properties of capped CNT55 systems with or without alkali metal atom adsorption were systematically investigated by density functional theory calculation.The results indicate that the adsorption of alkali metal on the center site of a CNT tip is energetically favorable.In addition,the adsorption energies increase with the introduction of the electric field.The excessive negative charges on CNT tips make electron emittance much easier and result in a decrease in work function.Furthermore,the inducing effect by positively charged alkali metal atoms can be reasonably considered as the dominant reason for the improvement in field emission properties.展开更多
A microwave plasma torch(MPT) simultaneous spectrometer was used to study the spectral character and the matrix effect on alkali metal ions in solution. The main parameters were optimized. The microwave forward power ...A microwave plasma torch(MPT) simultaneous spectrometer was used to study the spectral character and the matrix effect on alkali metal ions in solution. The main parameters were optimized. The microwave forward power was 100 W. The argon flow rate that was used to sustain the Ar-MPT included the flow rate of carrier gas and the flow rate of support gas, which were 0.8 and 1.0 L/min, respectively. The HCl concentration in the solution was 0.02 {mol/L.} The observation height was 9.0 mm. The detection limits of Li, Na, K, Rb, and Cs were 0.0003, 0.0004, 0.009, 0.07 and 2.4 mg/L, respectively, and the results obtained by the Ar-MPT were compared with those obtained by argon inductively coupled plasma(Ar-ICP) and argon microwave induced plasma(Ar-MIP). The interference effects of several matrix elements were also studied.展开更多
The application of high pressure can fundamentally modify the crystalline and electronic structures of elements as well as their chemical reactivity, which could lead to the formation of novel materials. Here, we expl...The application of high pressure can fundamentally modify the crystalline and electronic structures of elements as well as their chemical reactivity, which could lead to the formation of novel materials. Here, we explore the reactivity of lithium with sodium under high pressure, using a swarm structure searching techniques combined with first-principles calculations, which identify a thermodynamically stable Li–Na compound adopting an orthorhombic oP8 phase at pressure above 355 GPa. The formation of Li–Na may be a consequence of strong concentration of electrons transfering from the lithium and the sodium atoms into the interstitial sites, which also leads to open a relatively wide band gap for Li NaoP8. This is substantially different from atoms sharing or exchanging electrons in common compounds and alloys. In addition, lattice-dynamic calculations indicate that Li Na-oP8 remains dynamically stable when pressure decompresses down to 70 GPa.展开更多
The quality of stainless steel is closely related to the deformability of inclusions,which is significantly affected by their compositions.The present study first inve stigated the evolution of inclusion compositions ...The quality of stainless steel is closely related to the deformability of inclusions,which is significantly affected by their compositions.The present study first inve stigated the evolution of inclusion compositions in AI-killed steel with rare earth-alkali metals(Ca or Mg)combined treatme nt through four laboratory-scale experiments.The Ce contents in the final steel are 0.0080 wt%,0.015 wt%,0.016 wt%and 0.010 wt%,respectively.The Mg content is 0.0014 wt%in Ce-Mg combined treated steel,and the Ca content is0.0015 wt%in Ce-Ca combined treated steel.The deformability of inclusions in both Ce_(2)O_(3)-Al_(2)O_(3)-CaO and Ce_(2)O_(3)-Al_(2)O_(3)-MgO systems was subsequently evaluated by calculating their Young's modulus at low temperature.The results show that irregular Al_(2)O_(3)and MgAl_(2)O_(4)with poor deformability are modified to CeAlO_(3)and Ce_(2)O_(3)by Ce treatment,resulting in the decrease of Young's modulus of inclusions.The deformability of inclusions is further improved due to the transformation from lumped-like CeAlO_(3)to spherical CaO-Al_(2)O_(3)-Ce_(2)O_(3)caused by Ca treatment,and some of these inclusions are the ones with low liquidus temperature.Thermodynamic analysis was used to discuss the control condition of the formation and evolution of inclusions.Accordingly,the appropriate addition amounts of Al,Mg,Ce,and Ca are expected to control inclusion compositions and properties,including deformability and liquidus temperature,thereby improving the steel performance.展开更多
Internal curing agents (ICA) based on super absorbent polymer have poor alkali tolerance and reduce the early strength of concrete.An alkali tolerate internal curing agent (CAA-ICA) was designed and prepared by using ...Internal curing agents (ICA) based on super absorbent polymer have poor alkali tolerance and reduce the early strength of concrete.An alkali tolerate internal curing agent (CAA-ICA) was designed and prepared by using sodium carboxymethyl starch (CMS) with high hydrophilicity,acrylic acid (AA) containing anionic carboxylic group and acrylamide (AM) containing non-ionic amide group as the main raw materials.The results show that the ratio of CAA-ICA alkali absorption solution is higher than that existing ICA,which solves the low water absorption ratio of the ICA in alkali environment.The water absorption ratio of CAA-ICA in saturated Ca(OH)_(2) solution is 95.8 g·g^(-1),and the alkali tolerance coefficient is 3.4.The application of CAA-ICA in cement-based materials can increase the internal relative humidity and miniaturize the pore structure.The compressive strength of mortar increases up to 12.95%at 28 d,which provids a solution to overcome the reduction of the early strength.展开更多
5 different forests of Pinus massoniana, Schima superba, Liquidambar formosana, P. massoniana × S. superba, P. massoniana × L. formosana as the research object were set up to study the Cr, Cu and Zn content ...5 different forests of Pinus massoniana, Schima superba, Liquidambar formosana, P. massoniana × S. superba, P. massoniana × L. formosana as the research object were set up to study the Cr, Cu and Zn content of degraded red soil region in subtropics. The soil heavy metal pollution degree was evaluated by national environmental quality standard (II class). The results showed that three soil metals of P. massoniana × S. superba were the highest, and the soil metals enrichment ability was strong. The order of single factor pollution index of metal elements was Cu (1.38) > Cr (0.81) > Zn (0.42), and moderately pollution, pollution warning and no pollution, respectively. There was no significant correlation between three soil heavy metals and soil total carbon (TC), total nitrogen (TN) and total phosphorus (TP). These results suggested that the accumulation of heavy metal elements was not derived from the parent material of soil. There was a significant positive correlation between the three metal elements which indicated that the sources of the three elements were similar. The structural equation model showed that the direct and indirect effects among the influencing factors ultimately affected the activity of heavy metals by cascade effects.展开更多
Monitoring of heavy metals contamination of agricultural products and their transfer and bioaccumulation in crops like rice has become a hot topic worldwide over the last two decades. The present study was carried out...Monitoring of heavy metals contamination of agricultural products and their transfer and bioaccumulation in crops like rice has become a hot topic worldwide over the last two decades. The present study was carried out to determine the accumulation of heavy metals in rice fields and their transfer to rice grains. Soil, irrigation water and rice grains samples were gathered in Maga-Pouss, Far-North, Cameroon. Concentrations of six heavy metals (lead, cadmium, zinc, copper, iron and mercury) were evaluated by Atomic Absorption Spectrophotometer (AAS). Mercury was not detected in this study. Average concentrations of metals were in this order (in mg/kg): Fe (188.60 ± 97.06) > Pb (63.63 ± 7.11) > Cd (2.59 ± 0.29) > Zn (1.10 ± 1.05) > Cu (0.80 ± 0.73) in water and Pb (105.50 ± 31.11) > Fe (105.50 ± 31.11) > Cu (45.93 ± 14.39) > Zn (22.52 ± 6.40) > Cd (3.15 ± 0.49) in soil. Water in Maga-Pouss rice fields appears to be more harmful than the soil, notably for lead, cadmium and copper. In rice grains, heavy metals were found in this order (mg/kg): Fe (188.01 ± 82.62) > Cu (27.20 ± 0.00) > Zn (23.61 ± 12.42) > Pb (19.50 ± 19.91) > Cd (2.02 ± 1.05). The mean bioconcentration factor (BCF) of metals from soil to rice grains was in the following order: Fe (2.60) > Zn (1.05) > Cd (0.64) > Cu (0.59) > Pb (0.18). From water to rice grains, the order is: Cu (37.26) > Zn (22.49) > Cd (6.97) > Pb (2.74) > Fe (1.94). Rice field pH and electrical conductivity favored the uptake of lead, copper and cadmium by rice grains. The findings of this study will be good documentation for risk assessment, and decision-making by environmental managers in this region.展开更多
To realize the resource utilization of the valuable metals in the titanium-containing blast furnace slag,the process route of “hydrochloric acid leaching-electrolysis-carbonization and carbon dioxide capture-preparat...To realize the resource utilization of the valuable metals in the titanium-containing blast furnace slag,the process route of “hydrochloric acid leaching-electrolysis-carbonization and carbon dioxide capture-preparation of calcium carbonate” was proposed.In this study,the influences of process conditions on the leaching rates of calcium,magnesium,aluminum,and iron and the phases of the leaching residue were investigated for the leaching process.The experimental results show that the HCl solution could selectively leach the elements from the titanium-containing blast furnace slag.The better leaching conditions are the HCl solution concentration of 4 mol/L,the leaching time of 30 min,the ratio of liquid volume to solid gas of 10 mL/g,and the stirring paddle speed of 300 r/min.Under the conditions,the leaching rates of calcium,magnesium,aluminum,and iron can reach 85.87%,73.41%,81.35%,and 59.08%,and the leaching rate of titanium is 10.71%.The iron and the aluminum are removed from the leachate to obtain iron-aluminum water purification agents,and the magnesium is removed from the leachate to obtain magnesium hydroxide.The leaching residue phase is dominated by perovskite,followed by magnesium silicate and tricalcium aluminate,and the titaniumrich material could be obtained from the leaching residue by desiliconization.展开更多
This study assessed sediment contamination by heavy metals and pesticide active ingredients linked to chemical inputs used in agricultural activities in the lower Ouémé. Pesticide residues from the organochl...This study assessed sediment contamination by heavy metals and pesticide active ingredients linked to chemical inputs used in agricultural activities in the lower Ouémé. Pesticide residues from the organochlorine, pyrethroid and organophosphorus families were investigated by gas chromatography, and heavy metals (Cd, Pb, As, Ni, Zn, Fe, Mg, Cr and Hg) by atomic absorption spectrophotometry. The metallic pollution indices, the contamination factor (CF) and the ecological risk index were calculated. The results revealed 8 active ingredients in the rainy season and 9 in the dry season. Glyphosate was the active ingredient with the highest concentration at all stations, 9.65 ± 0.84 mg/kg recorded in the dry season at the Aguigadji station. All glyphosate values were above the EQS. DDT, Atrazine and Endosulfan also showed high concentrations in the dry and rainy seasons. Emamectin, Abamectin and Lambda Cyhalothrin also showed high concentrations in the dry season at Aguigadji, Ahlan and Sele. Only glyphosate was recorded at the control station (Toho), but in very low concentrations. Lead showed the highest concentrations at all the stations, 265.96 ± 21.02 mg/Kg in the rainy season and 255.38 ± 79.09 mg/Kg in the dry season, all detected at the Aguigadji station and above the EQS. Zn, Ni, Fe, Cu and Cr were all representative in both the dry and rainy seasons at the contaminated stations. Manganese showed high concentrations in the rainy season. Pb showed very high contamination (FC ≥ 6) at the Aguigadji and Ahlan stations and significant contamination (3 ≤ FC 6) at the Sele station in both the rainy and dry seasons. Ni, Hg and Cd, showed either moderate or significant contamination at the contaminated stations. The risk values showed a considerable ecological Ri (190 ≤ Ri < 380) in the rainy season and a moderate ecological Ri (95 ≤ Ri < 190) in the dry season at these contaminated stations.展开更多
Anode materials are an essential part of lithium-ion batteries(LIBs),which determine the performance and safety of LIBs.Currently,graphite,as the anode material of commercial LIBs,is limited by its low theoretical cap...Anode materials are an essential part of lithium-ion batteries(LIBs),which determine the performance and safety of LIBs.Currently,graphite,as the anode material of commercial LIBs,is limited by its low theoretical capacity of 372 mA·h·g^(−1),thus hindering further development toward high-capacity and large-scale applications.Alkaline earth metal iron-based oxides are considered a promising candidate to replace graphite because of their low preparation cost,good thermal stability,superior stability,and high electrochemical performance.Nonetheless,many issues and challenges remain to be addressed.Herein,we systematically summarize the research progress of alkaline earth metal iron-based oxides as LIB anodes.Meanwhile,the material and structural properties,synthesis methods,electrochemical reaction mechanisms,and improvement strategies are introduced.Finally,existing challenges and future research directions are discussed to accelerate their practical application in commercial LIBs.展开更多
Understanding the photoexcitation induced spin dynamics in ferromagnetic metals is important for the design of photo-controlled ultrafast spintronic device.In this work,by the ab initio nonadiabatic molecular dynamics...Understanding the photoexcitation induced spin dynamics in ferromagnetic metals is important for the design of photo-controlled ultrafast spintronic device.In this work,by the ab initio nonadiabatic molecular dynamics simulation,we have studied the spin dynamics induced by spin–orbit coupling(SOC)in Co and Fe using both spin-diabatic and spin-adiabatic representations.In Co system,it is found that the Fermi surface(E_(F))is predominantly contributed by the spin-minority states.The SOC induced spin flip will occur for the photo-excited spin-majority electrons as they relax to the E_(F),and the spin-minority electrons tend to relax to the EFwith the same spin through the electron–phonon coupling(EPC).The reduction of spin-majority electrons and the increase of spin-minority electrons lead to demagnetization of Co within100 fs.By contrast,in Fe system,the E_(F) is dominated by the spin-majority states.In this case,the SOC induced spin flip occurs for the photo-excited spin-minority electrons,which leads to a magnetization enhancement.If we move the E_(F) of Fe to higher energy by 0.6eV,the E_(F) will be contributed by the spin-minority states and the demagnetization will be observed again.This work provides a new perspective for understanding the SOC induced spin dynamics mechanism in magnetic metal systems.展开更多
Suites of granitic and metamorphic rocks form a perfect geological environment in which to investigate the source of metals related to gold deposits.In the East Province of Cameroon,the source of metals-related gold(g...Suites of granitic and metamorphic rocks form a perfect geological environment in which to investigate the source of metals related to gold deposits.In the East Province of Cameroon,the source of metals-related gold(grade~4.6 g/t)that occurs within metamorphic and granitic rocks remains ambiguous.The host rocks were subjected to XRF and ICP-MS whole-rock geochemistry and BSE/EDS mineral analyses to investigate the source(s)of metals related to gold in the Province.Petrographically,chalcopyrite-pyrite and magnetite-ilmenite are the main sulfi des and oxides of granites,respectively.The low-grade metamorphic rocks are sulfi de-rich consisting of arsenopyrite,chalcopyrite,pyrite,and sphalerite,and oxides include magnetite,ilmenite,hematite,and rutile.Cu,Ni,Co,Sb,Sc,and Zn concentrations depleted in high-grade metamorphic rocks and granites compared to low-grade metamorphic rocks.As well,Bi,Cd,Co,Cu,Ni,Sb,V,W,and Zn concentrations decrease with increasing temperatures from low-grade rocks to high-grade rocks and granites.The suite of depleted elements in high-grade rocks and granites is almost identical to those enriched in gold occurrences.We conclude that metals(Bi,Cd,Co,Cu,Ni,Sb,and Zn)related to gold mineralization in the East Province of Cameroon likely originated from metal-rich low-grade metamorphic rocks during prograde metamorphic processes prior to partial melting.展开更多
The objective of this study was to establish a baseline for future studies that aim to determine possible contamination from human, agricultural and industrial activities. As well as the determination of the indices o...The objective of this study was to establish a baseline for future studies that aim to determine possible contamination from human, agricultural and industrial activities. As well as the determination of the indices of environmental or geological contamination and enrichment factors of heavy metals Cr, Ni, Cu, Zn, As, Cd, Hg and Pb in agricultural soils of Constanza, Jarabacoa, Rancho Arriba and San José de Ocoa (SJO), municipalities located in the valleys of the Central mountain range of the Dominican Republic. The determination of the concentrations of heavy metals was carried out using the X-ray Fluorescence technique. Just like in Azua, San Juan de la Maguana (SJM) y Barahona in the southwest. Producer municipalities of vegetables, rice, beans, corn, melon, watermelon, tomato, banana, avocado, sugar cane and fodder for cattle. The concentration of 160 mg·kg<sup>-1</sup> Probable Effect Level (PEL) of Cr according to the SQuiRTs table (USEPA-NOAA) for agricultural soils, were exceeded in 50% of the samples in SJM, SJO, Jarabacoa and Constanza;in Barahona and Azua by 20%. The PEL of 42.8 mg·kg-1</sup><sup></sup> of the Ni was higher in more than 50% of the samples from SJM, Azua, Barahona and Jarabacoa;in SJO and Constanza at 35%. In the case of Cu with a PEL of 108 mg·kg-1</sup><sup></sup> in SJO and Constanza, 5% of the samples exceeded its, in the other areas the concentrations were lower. Zn, As and Pb did not manage to exceed their respective PEL.展开更多
Objective: The main objective of this study was to assess the degree of contamination of surface waters by heavy metals and pesticides. Method: To this end, data were collected in December 2022 from four specific samp...Objective: The main objective of this study was to assess the degree of contamination of surface waters by heavy metals and pesticides. Method: To this end, data were collected in December 2022 from four specific sampling stations: Okpara, Térou, Affon and Adjiro. Levels of heavy metals, including cadmium, chromium, copper, iron, mercury, nickel and lead, were measured and subjected to in-depth statistical analysis using graphical summation models. In addition, the concentrations of pesticide active ingredients present in the samples were interpreted and evaluated. The statistical data collected during this study were processed using R software, version 3.5.0. Results: The values obtained at the different stations Okpara, Térou, Affon and Adjiro are respectively Arsenic (2 × 10<sup>-4</sup> mg/L;2.2 × 10<sup>-1</sup> mg/L;1.2 × 10<sup>-4</sup> mg/L;2 × 10<sup>-4</sup> mg/L), Cadmium (4.4 × 10<sup>-5</sup> mg/L;1.1 × 10<sup>-2</sup> mg/L;10<sup>-4</sup> mg/L;4 × 10<sup>-4</sup> mg/L). Then Copper (7 × 10<sup>-4</sup> mg/L;3 × 10<sup>-3</sup> mg/L;7 × 10<sup>-4</sup> mg/L;1 × 10<sup>-4</sup> mg/L), Iron (1.51 mg/L;6.4 × 10<sup>-1</sup> mg/L;2.0012 mg/L;2.9 × 10<sup>-1</sup> mg/L), Lead (0 mg/L;0 mg/L;1.5 × 10<sup>-3</sup> mg/L;1.5 × 10<sup>-3</sup> mg/L). Mercury, nickel and chromium were not detected in surface waters. It is important to note that the values obtained for trace metals (Cadmium, Chromium, Copper, Iron, Mercury, nickel and chromium were not detected in surface waters. It is important to note that the values obtained for trace metals (cadmium, chromium, copper, iron, mercury, nickel and lead) were all below the guideline standards set by the WHO in 2006 for uncontaminated surface waters. This indicates that the surface waters of the Upper Ouémé were below acceptable contamination thresholds in terms of heavy metals. However, the presence of pesticide active ingredients such as cyfluthrin, endosulfan-alpha, endosulfan-beta, profenosfos, tihan, atrazine, gala super and glycel clearly indicates that these surface waters are subject to agricultural contamination.展开更多
Artisanal gold mining,a labor-intensive and antiquated technique,is a growing industry and the source of income for rural communities all over the world.However,artisanal gold mining has potential negative and long-te...Artisanal gold mining,a labor-intensive and antiquated technique,is a growing industry and the source of income for rural communities all over the world.However,artisanal gold mining has potential negative and long-term effects on economy,environment,and society.This study collected soil samples from 16 sample points including a control point to examine the pollution degrees and spatial distribution of heavy metals,as well as ecological and health risks associated with heavy metal pollution in the Ijero-Ekiti mining site,Nigeria.Geographical Information System(GIS)and remote sensing technologies were used to identify regions with high concentrations of heavy metals and assess the environmental impact of gold mining activities.The results show that the mean heavy metal concentrations of 16 soil pointa are 8.94(±5.97)mg/kg for As,0.18(±0.54)mg/kg for Cd,0.11(±1.06)mg/kg for Co,14.32(±3.43)mg/kg for Cr,6.89(±0.64)mg/kg for Cu,48.92(±11.77)mg/kg for Fe,135.81(±30.75)mg/kg for Mn,5.92(±0.96)mg/kg for Ni,5.72(±1.66)mg/kg for Pb,and 13.94(±1.38)mg/kg for Zn.The study reveals that heavy metal concentration in soils follows the order of Mn>Fe>Cr>Zn>As>Cu>Ni>Pb>Co>Cd.An analysis of soil samples indicates that 3 principal components(PCs)account for 70.008%of the total variance and there are strong positive correlations between various pairs of heavy metals.The total potential ecological risk index(309.599)in the study area is high.Non-carcinogenic risk suggests that there may be long-term health impacts on people who work in the mining areas due to chronic exposure to the environment.Based on the study,the hazard index of carcinogenic health risks associated with heavy metals through ingestion is 520.00×10^(–4).Dermal contact from As and Cr also increases the risk of cancer,with the highest hazard index value of 18.40×10^(–4).The lowest exposure pathway,with the hazard index value of 0.68×10^(–4),indicates that the inhalation of heavy metals has a comparatively low risk of cancer.This study recommends the formulation of policies to monitor the Ijero-Ekiti mining site and other regions in Nigeria where indiscriminate artisanal gold mining activities exist.展开更多
The roads in correlation with the traffic linked to their existences are at the origin of the emission of numerous polluting substances likely to induce disturbances of the growth and the behavioral changes in the org...The roads in correlation with the traffic linked to their existences are at the origin of the emission of numerous polluting substances likely to induce disturbances of the growth and the behavioral changes in the organisms living in their vicinities. The purpose of this study is to analyze the growth and capacity accumulation of a common earthworm species (Millsonia omodeoi) in Cu, Cr, Ni, Pb and Zn in soils along a main road called “Autoroute du Nord” in C?te d’Ivoire. Thus, the earthworms were harvested in soils from a distance of 0 m (just after the sidewalk) to a distance of 200 m from the toll highway and in a control soil sampled in Lamto reserve (C?te d’Ivoire). The study was carried out in the soil laboratory at the ecological station of Lamto reserve. The Ford-Walford technique was used to determine the model and parameters most appropriated for describing the growth of earthworms. A pairwise comparison of the growth parameters was carried out using the Kruskal-Wallis test with the STATISTICA 7.1 software. The heavy metals contained in the cultivated soils and earthworms were detected and quantified using a Scanning Electron Micro-scope (MEB FEG Supra 40 VP Zeiss) and an Atomic Absorption Spectrometer SPECTRA 110 (VARIAN). The capacity accumulation of heavy metals in earthworm was determined by the bioaccumulation factor (BAF) calculation. The results of this study showed that Gompertz is the most appropriated model to describe the growth of M. omodeoi. The life cycle of M. omodeoi shows that this earthworm adopts a K type demographic strategy. Cu is the most accumulated heavy metals in M. omodeoi, when Cr is the least accumulated. Concerning heavy metal content in the earthworms, it decreases while moving away from the pavement. These results highlight a possibility of choice of M. omodeoi as 1) indicators of heavy metals pollution and 2) target of biological organisms for environmental impact studies.展开更多
The continuous enrichment of heavy metals in soils has caused potential harm to groundwater.Quantitative methods to evaluate the harm of heavy metals in soil to groundwater are lacked in previous studies.Based on the ...The continuous enrichment of heavy metals in soils has caused potential harm to groundwater.Quantitative methods to evaluate the harm of heavy metals in soil to groundwater are lacked in previous studies.Based on the theory of groundwater circulation and solid-liquid equilibrium,a simple and easy-touse flux model of soil heavy metals migrating to groundwater is constructed.Based on groundwater environmental capacity,an innovative method for evaluating the harm of heavy metals in soil to groundwater is proposed,which has been applied in Hunchun Basin,Jilin Province,China.The results show that the fluxes of soil heavy metals into groundwater in the study area are Zn,Cu,As,Pb,Cd,Ni,and Hg in descending order.The content of heavy metals in groundwater(As,Hg,Cu,Pb,Zn,Ni,and Cd)in most areas has not risen to the threshold of environmental capacity within 10 years.The harm levels of soil heavy metals to groundwater in the most townships soils are at the moderate level or below.This evaluation method can quantify the flux of soil heavy metals into groundwater simply and quickly,determine the residual capacity of groundwater to heavy metals,evaluate the harm level of soil heavy metals to groundwater,provide support for relevant departments to carry out environmental protection of soil and groundwater,and provide a reference to carry out similar studies for related scholars.展开更多
The steam gasification kinetics of Zhundong raw coal and the washed coal by deionized water or hydrochloric acid with/without addition of CaO were tested by thermogravimetric analyzer(TGA)at medium temperatures(650℃ ...The steam gasification kinetics of Zhundong raw coal and the washed coal by deionized water or hydrochloric acid with/without addition of CaO were tested by thermogravimetric analyzer(TGA)at medium temperatures(650℃ to 800℃).The cation contents of potassium and sodium in samples were determined by Inductively Coupled Plasma Optical Emission Spectrometer(ICP-OES).The Brunauer-Emmett-Teller(BET)surface area of the samples was tested by N2 adsorption,and the morphologies of the samples were characterized by scanning electron microscopy(SEM).Experimental results showed that the organic sodium was the main catalyst for the gasification of the pyrolysis char,and the gasification rate of the char could be enhanced further with the introduction of CaO.The inherent alkali metals in coal and the introduced CaO showed a synergistic effect that occurred obviously above 735℃.The char conversion curves with or without CaO were fitted by the modified volumetric model(MVM).The calculated results indicated that the addition of CaO increased the pre-exponential factor obviously,but made little changes on the activation energy.It was proposed that the synergistic effect was resulted from the co-melting of the sodium and CaO,which facilitated the migration of the catalyst ions and the generation of C(O)intermediates for the gasification.展开更多
This work evaluated the effects of inherent alkali and alkaline earth metals on nitrogen transformation during steam gasification of Shengli lignite at the temperature of 873-1173 K in a fluidized-bed/fixed-bed quartz...This work evaluated the effects of inherent alkali and alkaline earth metals on nitrogen transformation during steam gasification of Shengli lignite at the temperature of 873-1173 K in a fluidized-bed/fixed-bed quartz reactor. The results indicated that the alkali metal Na and alkaline earth metals Ca, Mg in coal have different effects on inherent nitrogen transformation to NH3, HCN and char-N during the lignite steam gasification. Specifically during the steam gasification of Shengli lignite, Na and Ca, Mg not only catalyze the inherent nitrogen conversions to NH3, but also promote the secondary reactions of the nascent char-N as well as the generation of NH3 from the generated HCN, meanwhile they also inhibited the inherent nitrogen conversion to HCN and char-N. The presence of Na, Ca and Mg hindered the formation of oxidized nitrogen (N-X) functional groups, but enhanced pyridinic nitrogen (N-6) and quaternary nitrogen's (N-Q) formation in char.展开更多
基金financial support from European Union(Interreg FWVL V project PSYCHE)from the French National Research Agency(Multiprobe project,ANR-20-CE42-0007)。
文摘CO_(2)hydrogenation is an attractive way to store and utilize carbon dioxide generated by industrial processes,as well as to produce valuable chemicals from renewable and abundant resources.Iron catalysts are commonly used for the hydrogenation of carbon oxides to hydrocarbons.Iron-molybdenum catalysts have found numerous applications in catalysis,but have been never evaluated in the CO_(2)hydrogenation.In this work,the structural properties of iron-molybdenum catalysts without and with a promoting alkali metal(Li,Na,K,Rb,or Cs)were characterized using X-ray diffraction,hydrogen temperatureprogrammed reduction,CO_(2)temperature-programmed desorption,in-situ^(57)Fe Mossbauer spectroscopy and operando X-ray adsorption spectroscopy.Their catalytic performance was evaluated in the CO_(2)hydrogenation.During the reaction conditions,the catalysts undergo the formation of an iron(Ⅱ)molybdate structure,accompanied by a partial reduction of molybdenum and carbidization of iron.The rate of CO_(2)conversion and product selectivity strongly depend on the promoting alkali metals,and electronegativity was identified as an important factor affecting the catalytic performance.Higher CO_(2)conversion rates were observed with the promoters having higher electronegativity,while low electronegativity of alkali metals favors higher light olefin selectivity.
基金Project supported by the Key Program of the National Natural Science Foundation of China(Grant Nos.21031001 and U1034003)the National Natural Science Foundation of China(Grant Nos.20971040 and 21173072)the Cultivation Fund of the Key Scientific and Technical Innovation Project,Ministry of Education of China(Grant No.708029)
文摘The electronic structures and field emission properties of capped CNT55 systems with or without alkali metal atom adsorption were systematically investigated by density functional theory calculation.The results indicate that the adsorption of alkali metal on the center site of a CNT tip is energetically favorable.In addition,the adsorption energies increase with the introduction of the electric field.The excessive negative charges on CNT tips make electron emittance much easier and result in a decrease in work function.Furthermore,the inducing effect by positively charged alkali metal atoms can be reasonably considered as the dominant reason for the improvement in field emission properties.
文摘A microwave plasma torch(MPT) simultaneous spectrometer was used to study the spectral character and the matrix effect on alkali metal ions in solution. The main parameters were optimized. The microwave forward power was 100 W. The argon flow rate that was used to sustain the Ar-MPT included the flow rate of carrier gas and the flow rate of support gas, which were 0.8 and 1.0 L/min, respectively. The HCl concentration in the solution was 0.02 {mol/L.} The observation height was 9.0 mm. The detection limits of Li, Na, K, Rb, and Cs were 0.0003, 0.0004, 0.009, 0.07 and 2.4 mg/L, respectively, and the results obtained by the Ar-MPT were compared with those obtained by argon inductively coupled plasma(Ar-ICP) and argon microwave induced plasma(Ar-MIP). The interference effects of several matrix elements were also studied.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11672274,11274281,and 11174214)the China Academy of Engineering Physics Research Projects(Grant Nos.2012A0101001 and 2015B0101005)+2 种基金the Joint Fund of the National Natural Science Foundation of Chinathe China Academy of Engineering Physics(NSAF)(Grant No.U1430117)the Fund of National Key Laboratory of Shock Wave and Detonation Physics of China(Grant No.6142A03010101)
文摘The application of high pressure can fundamentally modify the crystalline and electronic structures of elements as well as their chemical reactivity, which could lead to the formation of novel materials. Here, we explore the reactivity of lithium with sodium under high pressure, using a swarm structure searching techniques combined with first-principles calculations, which identify a thermodynamically stable Li–Na compound adopting an orthorhombic oP8 phase at pressure above 355 GPa. The formation of Li–Na may be a consequence of strong concentration of electrons transfering from the lithium and the sodium atoms into the interstitial sites, which also leads to open a relatively wide band gap for Li NaoP8. This is substantially different from atoms sharing or exchanging electrons in common compounds and alloys. In addition, lattice-dynamic calculations indicate that Li Na-oP8 remains dynamically stable when pressure decompresses down to 70 GPa.
基金supported by the National Natural Science Foundation of China-Liaoning Joint Fund (U1908224)。
文摘The quality of stainless steel is closely related to the deformability of inclusions,which is significantly affected by their compositions.The present study first inve stigated the evolution of inclusion compositions in AI-killed steel with rare earth-alkali metals(Ca or Mg)combined treatme nt through four laboratory-scale experiments.The Ce contents in the final steel are 0.0080 wt%,0.015 wt%,0.016 wt%and 0.010 wt%,respectively.The Mg content is 0.0014 wt%in Ce-Mg combined treated steel,and the Ca content is0.0015 wt%in Ce-Ca combined treated steel.The deformability of inclusions in both Ce_(2)O_(3)-Al_(2)O_(3)-CaO and Ce_(2)O_(3)-Al_(2)O_(3)-MgO systems was subsequently evaluated by calculating their Young's modulus at low temperature.The results show that irregular Al_(2)O_(3)and MgAl_(2)O_(4)with poor deformability are modified to CeAlO_(3)and Ce_(2)O_(3)by Ce treatment,resulting in the decrease of Young's modulus of inclusions.The deformability of inclusions is further improved due to the transformation from lumped-like CeAlO_(3)to spherical CaO-Al_(2)O_(3)-Ce_(2)O_(3)caused by Ca treatment,and some of these inclusions are the ones with low liquidus temperature.Thermodynamic analysis was used to discuss the control condition of the formation and evolution of inclusions.Accordingly,the appropriate addition amounts of Al,Mg,Ce,and Ca are expected to control inclusion compositions and properties,including deformability and liquidus temperature,thereby improving the steel performance.
基金Funded by the National Key Research and Development Program of China (No.2019YFC1906202)the Guangxi Key Research and Development Plan (Nos.Guike AA18242007-3, Guike AB19259008, and Guike AB20297014)。
文摘Internal curing agents (ICA) based on super absorbent polymer have poor alkali tolerance and reduce the early strength of concrete.An alkali tolerate internal curing agent (CAA-ICA) was designed and prepared by using sodium carboxymethyl starch (CMS) with high hydrophilicity,acrylic acid (AA) containing anionic carboxylic group and acrylamide (AM) containing non-ionic amide group as the main raw materials.The results show that the ratio of CAA-ICA alkali absorption solution is higher than that existing ICA,which solves the low water absorption ratio of the ICA in alkali environment.The water absorption ratio of CAA-ICA in saturated Ca(OH)_(2) solution is 95.8 g·g^(-1),and the alkali tolerance coefficient is 3.4.The application of CAA-ICA in cement-based materials can increase the internal relative humidity and miniaturize the pore structure.The compressive strength of mortar increases up to 12.95%at 28 d,which provids a solution to overcome the reduction of the early strength.
文摘5 different forests of Pinus massoniana, Schima superba, Liquidambar formosana, P. massoniana × S. superba, P. massoniana × L. formosana as the research object were set up to study the Cr, Cu and Zn content of degraded red soil region in subtropics. The soil heavy metal pollution degree was evaluated by national environmental quality standard (II class). The results showed that three soil metals of P. massoniana × S. superba were the highest, and the soil metals enrichment ability was strong. The order of single factor pollution index of metal elements was Cu (1.38) > Cr (0.81) > Zn (0.42), and moderately pollution, pollution warning and no pollution, respectively. There was no significant correlation between three soil heavy metals and soil total carbon (TC), total nitrogen (TN) and total phosphorus (TP). These results suggested that the accumulation of heavy metal elements was not derived from the parent material of soil. There was a significant positive correlation between the three metal elements which indicated that the sources of the three elements were similar. The structural equation model showed that the direct and indirect effects among the influencing factors ultimately affected the activity of heavy metals by cascade effects.
文摘Monitoring of heavy metals contamination of agricultural products and their transfer and bioaccumulation in crops like rice has become a hot topic worldwide over the last two decades. The present study was carried out to determine the accumulation of heavy metals in rice fields and their transfer to rice grains. Soil, irrigation water and rice grains samples were gathered in Maga-Pouss, Far-North, Cameroon. Concentrations of six heavy metals (lead, cadmium, zinc, copper, iron and mercury) were evaluated by Atomic Absorption Spectrophotometer (AAS). Mercury was not detected in this study. Average concentrations of metals were in this order (in mg/kg): Fe (188.60 ± 97.06) > Pb (63.63 ± 7.11) > Cd (2.59 ± 0.29) > Zn (1.10 ± 1.05) > Cu (0.80 ± 0.73) in water and Pb (105.50 ± 31.11) > Fe (105.50 ± 31.11) > Cu (45.93 ± 14.39) > Zn (22.52 ± 6.40) > Cd (3.15 ± 0.49) in soil. Water in Maga-Pouss rice fields appears to be more harmful than the soil, notably for lead, cadmium and copper. In rice grains, heavy metals were found in this order (mg/kg): Fe (188.01 ± 82.62) > Cu (27.20 ± 0.00) > Zn (23.61 ± 12.42) > Pb (19.50 ± 19.91) > Cd (2.02 ± 1.05). The mean bioconcentration factor (BCF) of metals from soil to rice grains was in the following order: Fe (2.60) > Zn (1.05) > Cd (0.64) > Cu (0.59) > Pb (0.18). From water to rice grains, the order is: Cu (37.26) > Zn (22.49) > Cd (6.97) > Pb (2.74) > Fe (1.94). Rice field pH and electrical conductivity favored the uptake of lead, copper and cadmium by rice grains. The findings of this study will be good documentation for risk assessment, and decision-making by environmental managers in this region.
基金Funded by the National Natural Science Foundation of China Youth Fund(No.52204419)the Liaoning Provincial Natural Science Foundation(No.2022-BS-076)the Guangxi Science and Technology Major Project(No.2021AA12013)。
文摘To realize the resource utilization of the valuable metals in the titanium-containing blast furnace slag,the process route of “hydrochloric acid leaching-electrolysis-carbonization and carbon dioxide capture-preparation of calcium carbonate” was proposed.In this study,the influences of process conditions on the leaching rates of calcium,magnesium,aluminum,and iron and the phases of the leaching residue were investigated for the leaching process.The experimental results show that the HCl solution could selectively leach the elements from the titanium-containing blast furnace slag.The better leaching conditions are the HCl solution concentration of 4 mol/L,the leaching time of 30 min,the ratio of liquid volume to solid gas of 10 mL/g,and the stirring paddle speed of 300 r/min.Under the conditions,the leaching rates of calcium,magnesium,aluminum,and iron can reach 85.87%,73.41%,81.35%,and 59.08%,and the leaching rate of titanium is 10.71%.The iron and the aluminum are removed from the leachate to obtain iron-aluminum water purification agents,and the magnesium is removed from the leachate to obtain magnesium hydroxide.The leaching residue phase is dominated by perovskite,followed by magnesium silicate and tricalcium aluminate,and the titaniumrich material could be obtained from the leaching residue by desiliconization.
文摘This study assessed sediment contamination by heavy metals and pesticide active ingredients linked to chemical inputs used in agricultural activities in the lower Ouémé. Pesticide residues from the organochlorine, pyrethroid and organophosphorus families were investigated by gas chromatography, and heavy metals (Cd, Pb, As, Ni, Zn, Fe, Mg, Cr and Hg) by atomic absorption spectrophotometry. The metallic pollution indices, the contamination factor (CF) and the ecological risk index were calculated. The results revealed 8 active ingredients in the rainy season and 9 in the dry season. Glyphosate was the active ingredient with the highest concentration at all stations, 9.65 ± 0.84 mg/kg recorded in the dry season at the Aguigadji station. All glyphosate values were above the EQS. DDT, Atrazine and Endosulfan also showed high concentrations in the dry and rainy seasons. Emamectin, Abamectin and Lambda Cyhalothrin also showed high concentrations in the dry season at Aguigadji, Ahlan and Sele. Only glyphosate was recorded at the control station (Toho), but in very low concentrations. Lead showed the highest concentrations at all the stations, 265.96 ± 21.02 mg/Kg in the rainy season and 255.38 ± 79.09 mg/Kg in the dry season, all detected at the Aguigadji station and above the EQS. Zn, Ni, Fe, Cu and Cr were all representative in both the dry and rainy seasons at the contaminated stations. Manganese showed high concentrations in the rainy season. Pb showed very high contamination (FC ≥ 6) at the Aguigadji and Ahlan stations and significant contamination (3 ≤ FC 6) at the Sele station in both the rainy and dry seasons. Ni, Hg and Cd, showed either moderate or significant contamination at the contaminated stations. The risk values showed a considerable ecological Ri (190 ≤ Ri < 380) in the rainy season and a moderate ecological Ri (95 ≤ Ri < 190) in the dry season at these contaminated stations.
基金The authors acknowledge the support of the Shenyang University of Technology(QNPY202209-4)the National Natural Science Foundation of China(21571132)+1 种基金Jiangsu University Advanced Talent Fund(5501710002)the Education Department of Liaoning Province(JYTQN2023285).
文摘Anode materials are an essential part of lithium-ion batteries(LIBs),which determine the performance and safety of LIBs.Currently,graphite,as the anode material of commercial LIBs,is limited by its low theoretical capacity of 372 mA·h·g^(−1),thus hindering further development toward high-capacity and large-scale applications.Alkaline earth metal iron-based oxides are considered a promising candidate to replace graphite because of their low preparation cost,good thermal stability,superior stability,and high electrochemical performance.Nonetheless,many issues and challenges remain to be addressed.Herein,we systematically summarize the research progress of alkaline earth metal iron-based oxides as LIB anodes.Meanwhile,the material and structural properties,synthesis methods,electrochemical reaction mechanisms,and improvement strategies are introduced.Finally,existing challenges and future research directions are discussed to accelerate their practical application in commercial LIBs.
基金support of Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDB0450101)the National Natural Science Foundation of China(Grant Nos.12125408 and 11974322)+1 种基金the Informatization Plan of Chinese Academy of Sciences(Grant No.CAS-WX2021SF-0105)the support of the National Natural Science Foundation of China(Grant No.12174363)。
文摘Understanding the photoexcitation induced spin dynamics in ferromagnetic metals is important for the design of photo-controlled ultrafast spintronic device.In this work,by the ab initio nonadiabatic molecular dynamics simulation,we have studied the spin dynamics induced by spin–orbit coupling(SOC)in Co and Fe using both spin-diabatic and spin-adiabatic representations.In Co system,it is found that the Fermi surface(E_(F))is predominantly contributed by the spin-minority states.The SOC induced spin flip will occur for the photo-excited spin-majority electrons as they relax to the E_(F),and the spin-minority electrons tend to relax to the EFwith the same spin through the electron–phonon coupling(EPC).The reduction of spin-majority electrons and the increase of spin-minority electrons lead to demagnetization of Co within100 fs.By contrast,in Fe system,the E_(F) is dominated by the spin-majority states.In this case,the SOC induced spin flip occurs for the photo-excited spin-minority electrons,which leads to a magnetization enhancement.If we move the E_(F) of Fe to higher energy by 0.6eV,the E_(F) will be contributed by the spin-minority states and the demagnetization will be observed again.This work provides a new perspective for understanding the SOC induced spin dynamics mechanism in magnetic metal systems.
基金funded by the Ministry of Science and Technology of the People’s Republic of China(State Key Research Plan,No.2017YFC0601302).
文摘Suites of granitic and metamorphic rocks form a perfect geological environment in which to investigate the source of metals related to gold deposits.In the East Province of Cameroon,the source of metals-related gold(grade~4.6 g/t)that occurs within metamorphic and granitic rocks remains ambiguous.The host rocks were subjected to XRF and ICP-MS whole-rock geochemistry and BSE/EDS mineral analyses to investigate the source(s)of metals related to gold in the Province.Petrographically,chalcopyrite-pyrite and magnetite-ilmenite are the main sulfi des and oxides of granites,respectively.The low-grade metamorphic rocks are sulfi de-rich consisting of arsenopyrite,chalcopyrite,pyrite,and sphalerite,and oxides include magnetite,ilmenite,hematite,and rutile.Cu,Ni,Co,Sb,Sc,and Zn concentrations depleted in high-grade metamorphic rocks and granites compared to low-grade metamorphic rocks.As well,Bi,Cd,Co,Cu,Ni,Sb,V,W,and Zn concentrations decrease with increasing temperatures from low-grade rocks to high-grade rocks and granites.The suite of depleted elements in high-grade rocks and granites is almost identical to those enriched in gold occurrences.We conclude that metals(Bi,Cd,Co,Cu,Ni,Sb,and Zn)related to gold mineralization in the East Province of Cameroon likely originated from metal-rich low-grade metamorphic rocks during prograde metamorphic processes prior to partial melting.
文摘The objective of this study was to establish a baseline for future studies that aim to determine possible contamination from human, agricultural and industrial activities. As well as the determination of the indices of environmental or geological contamination and enrichment factors of heavy metals Cr, Ni, Cu, Zn, As, Cd, Hg and Pb in agricultural soils of Constanza, Jarabacoa, Rancho Arriba and San José de Ocoa (SJO), municipalities located in the valleys of the Central mountain range of the Dominican Republic. The determination of the concentrations of heavy metals was carried out using the X-ray Fluorescence technique. Just like in Azua, San Juan de la Maguana (SJM) y Barahona in the southwest. Producer municipalities of vegetables, rice, beans, corn, melon, watermelon, tomato, banana, avocado, sugar cane and fodder for cattle. The concentration of 160 mg·kg<sup>-1</sup> Probable Effect Level (PEL) of Cr according to the SQuiRTs table (USEPA-NOAA) for agricultural soils, were exceeded in 50% of the samples in SJM, SJO, Jarabacoa and Constanza;in Barahona and Azua by 20%. The PEL of 42.8 mg·kg-1</sup><sup></sup> of the Ni was higher in more than 50% of the samples from SJM, Azua, Barahona and Jarabacoa;in SJO and Constanza at 35%. In the case of Cu with a PEL of 108 mg·kg-1</sup><sup></sup> in SJO and Constanza, 5% of the samples exceeded its, in the other areas the concentrations were lower. Zn, As and Pb did not manage to exceed their respective PEL.
文摘Objective: The main objective of this study was to assess the degree of contamination of surface waters by heavy metals and pesticides. Method: To this end, data were collected in December 2022 from four specific sampling stations: Okpara, Térou, Affon and Adjiro. Levels of heavy metals, including cadmium, chromium, copper, iron, mercury, nickel and lead, were measured and subjected to in-depth statistical analysis using graphical summation models. In addition, the concentrations of pesticide active ingredients present in the samples were interpreted and evaluated. The statistical data collected during this study were processed using R software, version 3.5.0. Results: The values obtained at the different stations Okpara, Térou, Affon and Adjiro are respectively Arsenic (2 × 10<sup>-4</sup> mg/L;2.2 × 10<sup>-1</sup> mg/L;1.2 × 10<sup>-4</sup> mg/L;2 × 10<sup>-4</sup> mg/L), Cadmium (4.4 × 10<sup>-5</sup> mg/L;1.1 × 10<sup>-2</sup> mg/L;10<sup>-4</sup> mg/L;4 × 10<sup>-4</sup> mg/L). Then Copper (7 × 10<sup>-4</sup> mg/L;3 × 10<sup>-3</sup> mg/L;7 × 10<sup>-4</sup> mg/L;1 × 10<sup>-4</sup> mg/L), Iron (1.51 mg/L;6.4 × 10<sup>-1</sup> mg/L;2.0012 mg/L;2.9 × 10<sup>-1</sup> mg/L), Lead (0 mg/L;0 mg/L;1.5 × 10<sup>-3</sup> mg/L;1.5 × 10<sup>-3</sup> mg/L). Mercury, nickel and chromium were not detected in surface waters. It is important to note that the values obtained for trace metals (Cadmium, Chromium, Copper, Iron, Mercury, nickel and chromium were not detected in surface waters. It is important to note that the values obtained for trace metals (cadmium, chromium, copper, iron, mercury, nickel and lead) were all below the guideline standards set by the WHO in 2006 for uncontaminated surface waters. This indicates that the surface waters of the Upper Ouémé were below acceptable contamination thresholds in terms of heavy metals. However, the presence of pesticide active ingredients such as cyfluthrin, endosulfan-alpha, endosulfan-beta, profenosfos, tihan, atrazine, gala super and glycel clearly indicates that these surface waters are subject to agricultural contamination.
文摘Artisanal gold mining,a labor-intensive and antiquated technique,is a growing industry and the source of income for rural communities all over the world.However,artisanal gold mining has potential negative and long-term effects on economy,environment,and society.This study collected soil samples from 16 sample points including a control point to examine the pollution degrees and spatial distribution of heavy metals,as well as ecological and health risks associated with heavy metal pollution in the Ijero-Ekiti mining site,Nigeria.Geographical Information System(GIS)and remote sensing technologies were used to identify regions with high concentrations of heavy metals and assess the environmental impact of gold mining activities.The results show that the mean heavy metal concentrations of 16 soil pointa are 8.94(±5.97)mg/kg for As,0.18(±0.54)mg/kg for Cd,0.11(±1.06)mg/kg for Co,14.32(±3.43)mg/kg for Cr,6.89(±0.64)mg/kg for Cu,48.92(±11.77)mg/kg for Fe,135.81(±30.75)mg/kg for Mn,5.92(±0.96)mg/kg for Ni,5.72(±1.66)mg/kg for Pb,and 13.94(±1.38)mg/kg for Zn.The study reveals that heavy metal concentration in soils follows the order of Mn>Fe>Cr>Zn>As>Cu>Ni>Pb>Co>Cd.An analysis of soil samples indicates that 3 principal components(PCs)account for 70.008%of the total variance and there are strong positive correlations between various pairs of heavy metals.The total potential ecological risk index(309.599)in the study area is high.Non-carcinogenic risk suggests that there may be long-term health impacts on people who work in the mining areas due to chronic exposure to the environment.Based on the study,the hazard index of carcinogenic health risks associated with heavy metals through ingestion is 520.00×10^(–4).Dermal contact from As and Cr also increases the risk of cancer,with the highest hazard index value of 18.40×10^(–4).The lowest exposure pathway,with the hazard index value of 0.68×10^(–4),indicates that the inhalation of heavy metals has a comparatively low risk of cancer.This study recommends the formulation of policies to monitor the Ijero-Ekiti mining site and other regions in Nigeria where indiscriminate artisanal gold mining activities exist.
文摘The roads in correlation with the traffic linked to their existences are at the origin of the emission of numerous polluting substances likely to induce disturbances of the growth and the behavioral changes in the organisms living in their vicinities. The purpose of this study is to analyze the growth and capacity accumulation of a common earthworm species (Millsonia omodeoi) in Cu, Cr, Ni, Pb and Zn in soils along a main road called “Autoroute du Nord” in C?te d’Ivoire. Thus, the earthworms were harvested in soils from a distance of 0 m (just after the sidewalk) to a distance of 200 m from the toll highway and in a control soil sampled in Lamto reserve (C?te d’Ivoire). The study was carried out in the soil laboratory at the ecological station of Lamto reserve. The Ford-Walford technique was used to determine the model and parameters most appropriated for describing the growth of earthworms. A pairwise comparison of the growth parameters was carried out using the Kruskal-Wallis test with the STATISTICA 7.1 software. The heavy metals contained in the cultivated soils and earthworms were detected and quantified using a Scanning Electron Micro-scope (MEB FEG Supra 40 VP Zeiss) and an Atomic Absorption Spectrometer SPECTRA 110 (VARIAN). The capacity accumulation of heavy metals in earthworm was determined by the bioaccumulation factor (BAF) calculation. The results of this study showed that Gompertz is the most appropriated model to describe the growth of M. omodeoi. The life cycle of M. omodeoi shows that this earthworm adopts a K type demographic strategy. Cu is the most accumulated heavy metals in M. omodeoi, when Cr is the least accumulated. Concerning heavy metal content in the earthworms, it decreases while moving away from the pavement. These results highlight a possibility of choice of M. omodeoi as 1) indicators of heavy metals pollution and 2) target of biological organisms for environmental impact studies.
基金supported by the project of China Geology Survey(12120115032801,DD20190340)。
文摘The continuous enrichment of heavy metals in soils has caused potential harm to groundwater.Quantitative methods to evaluate the harm of heavy metals in soil to groundwater are lacked in previous studies.Based on the theory of groundwater circulation and solid-liquid equilibrium,a simple and easy-touse flux model of soil heavy metals migrating to groundwater is constructed.Based on groundwater environmental capacity,an innovative method for evaluating the harm of heavy metals in soil to groundwater is proposed,which has been applied in Hunchun Basin,Jilin Province,China.The results show that the fluxes of soil heavy metals into groundwater in the study area are Zn,Cu,As,Pb,Cd,Ni,and Hg in descending order.The content of heavy metals in groundwater(As,Hg,Cu,Pb,Zn,Ni,and Cd)in most areas has not risen to the threshold of environmental capacity within 10 years.The harm levels of soil heavy metals to groundwater in the most townships soils are at the moderate level or below.This evaluation method can quantify the flux of soil heavy metals into groundwater simply and quickly,determine the residual capacity of groundwater to heavy metals,evaluate the harm level of soil heavy metals to groundwater,provide support for relevant departments to carry out environmental protection of soil and groundwater,and provide a reference to carry out similar studies for related scholars.
基金financially supported by the research project“Advancing and Demonstration of the Technology of CO2 Capture,Storage and Usage”(2016YFE0102500)National Natural Science Foundation of China(51606194)。
文摘The steam gasification kinetics of Zhundong raw coal and the washed coal by deionized water or hydrochloric acid with/without addition of CaO were tested by thermogravimetric analyzer(TGA)at medium temperatures(650℃ to 800℃).The cation contents of potassium and sodium in samples were determined by Inductively Coupled Plasma Optical Emission Spectrometer(ICP-OES).The Brunauer-Emmett-Teller(BET)surface area of the samples was tested by N2 adsorption,and the morphologies of the samples were characterized by scanning electron microscopy(SEM).Experimental results showed that the organic sodium was the main catalyst for the gasification of the pyrolysis char,and the gasification rate of the char could be enhanced further with the introduction of CaO.The inherent alkali metals in coal and the introduced CaO showed a synergistic effect that occurred obviously above 735℃.The char conversion curves with or without CaO were fitted by the modified volumetric model(MVM).The calculated results indicated that the addition of CaO increased the pre-exponential factor obviously,but made little changes on the activation energy.It was proposed that the synergistic effect was resulted from the co-melting of the sodium and CaO,which facilitated the migration of the catalyst ions and the generation of C(O)intermediates for the gasification.
基金The authors gratefully acknowledge the financial support provided by the 12th Five-Year Plan of National Science and Technology Support (Grant 2012BAA04B02)the National Natural Science Foundation of China (No.21406261).
文摘This work evaluated the effects of inherent alkali and alkaline earth metals on nitrogen transformation during steam gasification of Shengli lignite at the temperature of 873-1173 K in a fluidized-bed/fixed-bed quartz reactor. The results indicated that the alkali metal Na and alkaline earth metals Ca, Mg in coal have different effects on inherent nitrogen transformation to NH3, HCN and char-N during the lignite steam gasification. Specifically during the steam gasification of Shengli lignite, Na and Ca, Mg not only catalyze the inherent nitrogen conversions to NH3, but also promote the secondary reactions of the nascent char-N as well as the generation of NH3 from the generated HCN, meanwhile they also inhibited the inherent nitrogen conversion to HCN and char-N. The presence of Na, Ca and Mg hindered the formation of oxidized nitrogen (N-X) functional groups, but enhanced pyridinic nitrogen (N-6) and quaternary nitrogen's (N-Q) formation in char.
