Gears are pivotal in mechanical drives,and gear contact analysis is a typically difficult problem to solve.Emerging isogeometric analysis(IGA)methods have developed new ideas to solve this problem.In this paper,a thre...Gears are pivotal in mechanical drives,and gear contact analysis is a typically difficult problem to solve.Emerging isogeometric analysis(IGA)methods have developed new ideas to solve this problem.In this paper,a threedimensional body parametric gear model of IGA is established,and a theoretical formula is derived to realize single-tooth contact analysis.Results were benchmarked against those obtained from commercial software utilizing the finite element analysis(FEA)method to validate the accuracy of our approach.Our findings indicate that the IGA-based contact algorithmsuccessfullymet theHertz contact test.When juxtaposed with the FEA approach,the IGAmethod demonstrated fewer node degrees of freedomand reduced computational units,all whilemaintaining comparable accuracy.Notably,the IGA method appeared to exhibit consistency in analysis accuracy irrespective of computational unit density,and also significantlymitigated non-physical oscillations in contact stress across the tooth width.This underscores the prowess of IGA in contact analysis.In conclusion,IGA emerges as a potent tool for addressing contact analysis challenges and holds significant promise for 3D gear modeling,simulation,and optimization of various mechanical components.展开更多
Certain outsourcing services for agricultural management in China,such as pest control in grain production,have experienced prolonged sluggishness,contrasting with the relatively high level of outsourcing services obs...Certain outsourcing services for agricultural management in China,such as pest control in grain production,have experienced prolonged sluggishness,contrasting with the relatively high level of outsourcing services observed in harvesting,land preparation,and sowing.This study examines the feasibility of implementing whole-step outsourcing in grain production by conducting a case study of rice and maize production in Jiangsu,Jilin,and Sichuan provinces in China.The provision of outsourcing services hinges on two essential conditions:technological advancements fostering specialized production and economies of scale,coupled with a market size sufficient to realize the aforementioned potential economies of scale.The results showed that outsourcing pest control or harvesting services had varying economies of scale.The outsourcing services in pest control were less common than in harvesting services,and their marginal growth space of the economies of scale with technological change was also smaller.Determined by the operational characteristics of pest control itself,the market scale of its professional services is small.Therefore,achieving the whole-step outsourcing of grain production necessitates not only technological innovation but also effective policy interventions to overcome the constraints of market scale.Such interventions include(1)optimizing crop layouts between planning regions and reducing land fragmentation and(2)supplying timely and effective inter-regional agricultural information for service providers aided by information technology.展开更多
The supercritical CO_(2)cOoled Lithium-Lead(COOL)blanket has been designed as one advanced blanket candidate for the Chinese Fusion Engineering Test Reactor(CFETR).This work focuses on the electromagnetic(EM)loads(Max...The supercritical CO_(2)cOoled Lithium-Lead(COOL)blanket has been designed as one advanced blanket candidate for the Chinese Fusion Engineering Test Reactor(CFETR).This work focuses on the electromagnetic(EM)loads(Maxwell force and Lorentz force)acting on the COOL blanket,which are important mechanical loads in further structural analysis of the COOL blanket.A 3D electromagnetic analysis is performed using the ANSYS finite element method to obtain EM loads on the COOL blanket in this study.At first,the magnetic scalar potential(MSP)method is used to obtain the magnetic field and the Maxwell force on the COOL blanket.Then,the magnetic vector potential(MVP)method is performed during a plasma disruption event to get the eddy current distribution.At last,a multi-step method is adopted for the calculation of the Lorentz force and the torque.The maximum Lorentz forces of inboard and outboard blanket structural components are 5624 kN and 2360 kN respectively.展开更多
DNA methylation has been extensively investigated in recent years,not least because of its known relationship with various diseases.Progress in analytical methods can greatly increase the relevance of DNA methylation ...DNA methylation has been extensively investigated in recent years,not least because of its known relationship with various diseases.Progress in analytical methods can greatly increase the relevance of DNA methylation studies to both clinical medicine and scientific research.Microflu-idic chips are excellent carriers for molecular analysis,and their use can provide improvements from multiple aspects.On-chip molecular analysis has received extensive attention owing to its advantages of portability,high throughput,low cost,and high efficiency.In recent years,the use of novel microfluidic chips for DNA methylation analysis has been widely reported and has shown obvious superiority to conventional methods.In this review,wefirst focus on DNA methylation and its applications.Then,we discuss advanced microfluidic-based methods for DNA methylation analysis and describe the great progress that has been made in recent years.Finally,we summarize the advantages that microfluidic technology brings to DNA methylation analysis and describe several challenges and perspectives for on-chip DNA methylation analysis.This review should help researchers improve their understanding and make progress in developing microfluidic-based methods for DNA methylation analysis.展开更多
Lily(Lilium spp.) is an important ornamental flower, which is mainly propagated by bulbs. Cell wall invertases(CWINs), which catalyze the irreversibly conversion of sucrose into glucose and fructose in the extracellul...Lily(Lilium spp.) is an important ornamental flower, which is mainly propagated by bulbs. Cell wall invertases(CWINs), which catalyze the irreversibly conversion of sucrose into glucose and fructose in the extracellular space, are key enzymes participating in sucrose allocation in higher plants. Previous studies have shown that CWINs play an essential role in bulblet initiation process in bulbous crops, but the underlying molecular mechanism remains unclear. Here, a CWIN gene of Lilium brownii var. giganteum(Lbg) was identified and amplified from genomic DNA. Quantitative RT-PCR assays revealed that the expression level of LbgCWIN1 was highly upregulated exactly when the endogenous starch degraded in non-sucrose medium during in vitro bulblet initiation in Lbg. Phylogenetic relationship, motif, and domain analysis of LbgCWIN1 protein and CWINs in other plant species showed that all sequences of these CWIN proteins were highly conserved. The promoter sequence of LbgCWIN1 possessed a number of alpha-amylase-, phytohormone-, light-and stress-responsive cis-elements. Meanwhile, β-glucuronidase(GUS) assay showed that the 459 bp upstream fragment from the translational start site displayed maximal promoter activity. These results revealed that LbgCWIN1 might function in the process of in vitro bulblet initiation and be in the response to degradation of endogenous starch.展开更多
The literary review presented in the following paper aims to analyze the tracking tools used in different countries during the period of the COVID-19 pandemic. Tracking apps that have been adopted in many countries to...The literary review presented in the following paper aims to analyze the tracking tools used in different countries during the period of the COVID-19 pandemic. Tracking apps that have been adopted in many countries to collect data in a homogeneous and immediate way have made up for the difficulty of collecting data and standardizing evaluation criteria. However, the regulation on the protection of personal data in the health sector and the adoption of the new General Data Protection Regulation in European countries has placed a strong limitation on their use. This has not been the case in non-European countries, where monitoring methodologies have become widespread. The textual analysis presented is based on co-occurrence and multiple correspondence analysis to show the contact tracing methods adopted in different countries in the pandemic period by relating them to the issue of privacy. It also analyzed the possibility of applying Blockchain technology in applications for tracking contagions from COVID-19 and managing health data to provide a high level of security and transparency, including through anonymization, thus increasing user trust in using the apps.展开更多
Currently,there is no solid criterion for judging the quality of the estimators in factor analysis.This paper presents a new evaluation method for exploratory factor analysis that pinpoints an appropriate number of fa...Currently,there is no solid criterion for judging the quality of the estimators in factor analysis.This paper presents a new evaluation method for exploratory factor analysis that pinpoints an appropriate number of factors along with the best method for factor extraction.The proposed technique consists of two steps:testing the normality of the residuals from the fitted model via the Shapiro-Wilk test and using an empirical quantified index to judge the quality of the factor model.Examples are presented to demonstrate how the method is implemented and to verify its effectiveness.展开更多
Effects of performing an R-factor analysis of observed variables based on population models comprising R- and Q-factors were investigated. Although R-factor analysis of data based on a population model comprising R- a...Effects of performing an R-factor analysis of observed variables based on population models comprising R- and Q-factors were investigated. Although R-factor analysis of data based on a population model comprising R- and Q-factors is possible, this may lead to model error. Accordingly, loading estimates resulting from R-factor analysis of sample data drawn from a population based on a combination of R- and Q-factors will be biased. It was shown in a simulation study that a large amount of Q-factor variance induces an increase in the variation of R-factor loading estimates beyond the chance level. Tests of the multivariate kurtosis of observed variables are proposed as an indicator of possible Q-factor variance in observed variables as a prerequisite for R-factor analysis.展开更多
Immune changes and inflammatory responses have been identified as central events in the pathological process of spinal co rd injury.They can greatly affect nerve regeneration and functional recovery.However,there is s...Immune changes and inflammatory responses have been identified as central events in the pathological process of spinal co rd injury.They can greatly affect nerve regeneration and functional recovery.However,there is still limited understanding of the peripheral immune inflammato ry response in spinal cord inju ry.In this study.we obtained microRNA expression profiles from the peripheral blood of patients with spinal co rd injury using high-throughput sequencing.We also obtained the mRNA expression profile of spinal cord injury patients from the Gene Expression Omnibus(GEO)database(GSE151371).We identified 54 differentially expressed microRNAs and 1656 diffe rentially expressed genes using bioinformatics approaches.Functional enrichment analysis revealed that various common immune and inflammation-related signaling pathways,such as neutrophil extracellular trap formation pathway,T cell receptor signaling pathway,and nuclear factor-κB signal pathway,we re abnormally activated or inhibited in spinal cord inju ry patient samples.We applied an integrated strategy that combines weighted gene co-expression network analysis,LASSO logistic regression,and SVM-RFE algorithm and identified three biomarke rs associated with spinal cord injury:ANO10,BST1,and ZFP36L2.We verified the expression levels and diagnostic perfo rmance of these three genes in the original training dataset and clinical samples through the receiver operating characteristic curve.Quantitative polymerase chain reaction results showed that ANO20 and BST1 mRNA levels were increased and ZFP36L2 mRNA was decreased in the peripheral blood of spinal cord injury patients.We also constructed a small RNA-mRNA interaction network using Cytoscape.Additionally,we evaluated the proportion of 22 types of immune cells in the peripheral blood of spinal co rd injury patients using the CIBERSORT tool.The proportions of naive B cells,plasma cells,monocytes,and neutrophils were increased while the proportions of memory B cells,CD8^(+)T cells,resting natural killer cells,resting dendritic cells,and eosinophils were markedly decreased in spinal cord injury patients increased compared with healthy subjects,and ANO10,BST1 and ZFP26L2we re closely related to the proportion of certain immune cell types.The findings from this study provide new directions for the development of treatment strategies related to immune inflammation in spinal co rd inju ry and suggest that ANO10,BST2,and ZFP36L2 are potential biomarkers for spinal cord injury.The study was registe red in the Chinese Clinical Trial Registry(registration No.ChiCTR2200066985,December 12,2022).展开更多
We investigated the parametric optimization on incremental sheet forming of stainless steel using Grey Relational Analysis(GRA) coupled with Principal Component Analysis(PCA). AISI 316L stainless steel sheets were use...We investigated the parametric optimization on incremental sheet forming of stainless steel using Grey Relational Analysis(GRA) coupled with Principal Component Analysis(PCA). AISI 316L stainless steel sheets were used to develop double wall angle pyramid with aid of tungsten carbide tool. GRA coupled with PCA was used to plan the experiment conditions. Control factors such as Tool Diameter(TD), Step Depth(SD), Bottom Wall Angle(BWA), Feed Rate(FR) and Spindle Speed(SS) on Top Wall Angle(TWA) and Top Wall Angle Surface Roughness(TWASR) have been studied. Wall angle increases with increasing tool diameter due to large contact area between tool and workpiece. As the step depth, feed rate and spindle speed increase,TWASR decreases with increasing tool diameter. As the step depth increasing, the hydrostatic stress is raised causing severe cracks in the deformed surface. Hence it was concluded that the proposed hybrid method was suitable for optimizing the factors and response.展开更多
This research aims to propose a practical framework designed for the automatic analysis of a product’s comprehensive functionality and security vulnerabilities,generating applicable guidelines based on real-world sof...This research aims to propose a practical framework designed for the automatic analysis of a product’s comprehensive functionality and security vulnerabilities,generating applicable guidelines based on real-world software.The existing analysis of software security vulnerabilities often focuses on specific features or modules.This partial and arbitrary analysis of the security vulnerabilities makes it challenging to comprehend the overall security vulnerabilities of the software.The key novelty lies in overcoming the constraints of partial approaches.The proposed framework utilizes data from various sources to create a comprehensive functionality profile,facilitating the derivation of real-world security guidelines.Security guidelines are dynamically generated by associating functional security vulnerabilities with the latest Common Vulnerabilities and Exposure(CVE)and Common Vulnerability Scoring System(CVSS)scores,resulting in automated guidelines tailored to each product.These guidelines are not only practical but also applicable in real-world software,allowing for prioritized security responses.The proposed framework is applied to virtual private network(VPN)software,wherein a validated Level 2 data flow diagram is generated using the Spoofing,Tampering,Repudiation,Information Disclosure,Denial of Service,and Elevation of privilege(STRIDE)technique with references to various papers and examples from related software.The analysis resulted in the identification of a total of 121 vulnerabilities.The successful implementation and validation demonstrate the framework’s efficacy in generating customized guidelines for entire systems,subsystems,and selected modules.展开更多
The rotor is the most important component of rotating machinery,and the vibration produced by its mass unbalance has a serious influence on the secure and steady operation of the machine,so an effective online suppres...The rotor is the most important component of rotating machinery,and the vibration produced by its mass unbalance has a serious influence on the secure and steady operation of the machine,so an effective online suppression technology is urgently needed.A new hydraulic unbalanced bionic self-recovery system is introduced,imitating the way of manually repairing faulty equipment.To accomplish the effect of actuator mass redistribution,the technology employs pressurized air to drive the quantitative transfer of liquid in the reservoir cavity at opposite positions.It can complete the online adjustment of the equipment's balancing state and suppress the unbalanced vibration of equipment in real time,which gives the equipment the ability to maintain an autonomous health state and improve equipment performance.The composition and working principle of the system are introduced in detail,and the key performance parameters,such as the minimum running speed and the balancing liquid transfer speed,are analyzed theoretically.The fluid-solid coupling model of the actuator was established,and the two-phase flow from inside the hydraulic unbalanced bionic self-recovery actuator was simulated under multiple working conditions and the performance parameters were quantitatively analyzed.A balancing simulation test bed was built,and its effectiveness was verified by performance parameter tests and unbalanced bionic self-recovery experiments.The experimental results show that the mass distribution adjustment of the balancing disk can be achieved using different viscosity balancing liquid,and the response of liquid viscosity 10 cSt is faster than that of liquid viscosity 100 cSt in the process of balancing liquid transfer,and the time is reduced by more than 75%;the system can reduce the simulated rotor amplitude from 18.3μm to 10.6μm online in real time,which provides technical support for the subsequent development of a new generation of bionic intelligent equipment.展开更多
As part of the drive to improve coffee and cocoa production in Ivory Coast, studies are carried out to identify soils that are favourable for these crops. It is therefore necessary to orientate soil investigations bas...As part of the drive to improve coffee and cocoa production in Ivory Coast, studies are carried out to identify soils that are favourable for these crops. It is therefore necessary to orientate soil investigations based on reliable criteria that best discriminate soil cover. With this in mind, this study is being carried out to help improve survey methods by mapping soil landscapes. It uses GIS and weighted multicriteria analysis. To do this, satellite images were processed and the geological map of the square degrees of M’Bahiakro and Daloa was reclassified. The results show that relief is the main factor in soil landscape differentiation, with respective weights of 0.58 and 0.67 for the forest and pre-forest zones. In contrast, the weight of geological formation in soil landscape differentiation remains low (0.05 for the forest zone and 0.07 for the pre-forest zone). The criteria used on the base of aggregation sum methods have made it possible to formulate soil landscape mapping prediction functions according to agro-ecological environments in the humid intertropical zone. This is essential for the orientation of soil survey work. Nevertheless, other comparative methods, such as the coding mapping method, could provide elements for discussion to validate the models.展开更多
BACKGROUND:In clinical practice,some patients might not be able or unwilling to provide a thorough history of medication and poison exposure.The aim of this study was to use toxicological analysis to examine the clini...BACKGROUND:In clinical practice,some patients might not be able or unwilling to provide a thorough history of medication and poison exposure.The aim of this study was to use toxicological analysis to examine the clinical characteristics of patients with acute poisoning whose exposure history was uncertain from a toxicological analysis perspective.METHODS:This was a retrospective and descriptive study from an institute of poisoning.Patient registration information and test reports spanning the period from April 1,2020 to March 31,2022,were obtained.Patients with uncertain exposure histories and who underwent toxicological analysis were included.Clinical manifestations and categories of toxics were analyzed.RESULTS:Among the 195 patients with positive toxicological analysis results,the main causes of uncertain exposure history was disturbance of consciousness(62.6%),unawareness(23.6%)and unwillingness or lack of cooperation(13.8%).The predominant clinical manifestations were disturbed consciousness(62.6%),followed by vomiting and nausea(14.4%)and liver function abnormalities(8.7%).A comparison of clinical manifestations between patients with positive and negative(n=99)toxicological analyses results revealed significantly different proportions of disturbances in consciousness(63%vs.21%),dizziness(1.5%vs.5.1%),multi-organ failure(1.5%vs.7.1%),and local pain(0 vs 4%).The main categories of substances involved were psychiatric medications(23.1%),sedatives(20.5%),insecticides(13.8%),and herbicides(12.8%).CONCLUSION:The clinical manifestations of acute poisoning in patients with an uncertain exposure history are diverse and nonspecific,and toxicological analysis plays a pivotal role in the diagnosis and differential diagnosis of such patients.展开更多
In this paper,the multi-body coupled dynamic characteristics of a semisubmersible platform and an HYSY 229 barge were investigated.First,coupled hydrodynamic analysis of the HYSY 229 barge and the semisubmersible plat...In this paper,the multi-body coupled dynamic characteristics of a semisubmersible platform and an HYSY 229 barge were investigated.First,coupled hydrodynamic analysis of the HYSY 229 barge and the semisubmersible platform was performed.Relevant hydrodynamic parameters were obtained using the retardation function method of three-dimensional frequency-domain potential flow theory.The results of the hydrodynamic analysis were highly consistent with the test findings,verifying the accuracy of the multifloating hydrodynamic coupling analysis,and key hydrodynamic parameters were solved for different water depths and the coupling effect.According to the obtained results,the hydrodynamic influence was the largest in shallow waters when the coupling effect was considered.Furthermore,the coupled motion equation combined with viscous damping,fender system,and mooring system was established,and the hydrodynamics,floating body motion,and dynamic response of the fender system were analyzed.Motion analysis revealed good agreement among the surge,sway,and yaw motions of the two floating bodies.However,when the wave period reached 10 s,the motion of the two floating bodies showed severe shock,and a relative motion was also observed.Therefore,excessive constraints should be added between the two floating bodies during construction to ensure construction safety.The numerical analysis and model test results of the semisubmersible platform and HYSY 229 barge at a water depth of 42 m and sea conditions of 0°,45°,and 90° were in good agreement,and the error was less than 5%.The maximum movement of the HYSY 229 barge reached 2.61 m in the sway direction,whereas that of the semisubmersible platform was 2.11 m.During construction,excessive constraints should be added between the two floating bodies to limit their relative movement and ensure construction safety.展开更多
Condensed and hydrolysable tannins are non-toxic natural polyphenols that are a commercial commodity industrialized for tanning hides to obtain leather and for a growing number of other industrial applications mainly ...Condensed and hydrolysable tannins are non-toxic natural polyphenols that are a commercial commodity industrialized for tanning hides to obtain leather and for a growing number of other industrial applications mainly to substitute petroleum-based products.They are a definite class of sustainable materials of the forestry industry.They have been in operation for hundreds of years to manufacture leather and now for a growing number of applications in a variety of other industries,such as wood adhesives,metal coating,pharmaceutical/medical applications and several others.This review presents the main sources,either already or potentially commercial of this forestry by-materials,their industrial and laboratory extraction systems,their systems of analysis with their advantages and drawbacks,be these methods so simple to even appear primitive but nonetheless of proven effectiveness,or very modern and instrumental.It constitutes a basic but essential summary of what is necessary to know of these sustainable materials.In doing so,the review highlights some of the main challenges that remain to be addressed to deliver the quality and economics of tannin supply necessary to fulfill the industrial production requirements for some materials-based uses.展开更多
Spatial heterogeneity or“patchiness”of plankton distributions in the ocean has always been an attractive and challenging scientific issue to oceanographers.We focused on the accumulation and dynamic mechanism of the...Spatial heterogeneity or“patchiness”of plankton distributions in the ocean has always been an attractive and challenging scientific issue to oceanographers.We focused on the accumulation and dynamic mechanism of the Acetes chinensis in the Lianyungang nearshore licensed fishing area.The Lagrangian frame approaches including the Lagrangian coherent structures theory,Lagrangian residual current,and Lagrangian particle-tracking model were applied to find the transport pathways and aggregation characteristics of Acetes chinensis.There exist some material transport pathways for Acetes chinensis passing through the licensed fishing area,and Acetes chinensis is easy to accumulate in the licensed fishing area.The main mechanism forming this distribution pattern is the local circulation induced by the nonlinear interaction of topography and tidal flow.Both the Lagrangian coherent structure analysis and the particle trajectory tracking indicate that Acetes chinensis in the licensed fishing area come from the nearshore estuary.This work contributed to the adjustment of licensed fishing area and the efficient utilization of fishery resources.展开更多
The contents of carbon(C),nitrogen(N),and phosphorus(P)in soil-microorganisms-plant significantly affect tea quality by altering the main quality components of tea,such as tea polyphenols,amino acids,and caffeine.Howev...The contents of carbon(C),nitrogen(N),and phosphorus(P)in soil-microorganisms-plant significantly affect tea quality by altering the main quality components of tea,such as tea polyphenols,amino acids,and caffeine.However,few studies have quantified the effects of these factors on the main quality components of tea.The study aimed to explore the interactions of C,N,and P in soil-microorganisms-plants and the effects of these factors on the main quality components of tea by using the path analysis method.The results indicated that(1)The contents of C,N,and P in soil,microorganisms,and tea plants were highly correlated and collinear,and showed significant correlations with the main quality components of tea.(2)Optimal regression equations were established to esti-mate tea polyphenol,amino acid,catechin,caffeine,and water extract content based on C,N,and P contents in soil,microorganisms,and tea plants(R^(2)=0.923,0.726,0.954,0.848,and 0.883,respectively).(3)Pathway analysis showed that microbial biomass phosphorus(MBP),root phosphorus,branch nitrogen,and microbial biomass carbon(MBC)were the largest direct impact factors on tea polyphenol,catechin,water extracts,amino acid,and caffeine content,respectively.Leaf carbon,root phosphorus,and leaf nitrogen were the largest indirect impact factors on tea polyphenol,catechin,and water extract content,respectively.Leaf carbon indirectly affected tea polyphenol content mainly by altering MBP content.Root phosphorus indirectly affected catechin content mainly by altering soil organic carbon content.Leaf nitrogen indirectly affected water extract content mainly by altering branch nitrogen content.The research results provide the scientific basis for reasonable fertilization in tea gardens and tea quality improvement.展开更多
The lack of a suitable rootstock to control scion growth has limited the development of high-density plantations in pear production, which is partly attributed to poor understanding of the dwarfing mechanism. In the p...The lack of a suitable rootstock to control scion growth has limited the development of high-density plantations in pear production, which is partly attributed to poor understanding of the dwarfing mechanism. In the present study, the rootstock of the dwarf-type pear (Pyrus betulaefolia)PY-9’ was identified and used as the material for anatomical analysis.PY-9’ grew to half the tree height of the normal cultivar Zhengdu’, along with fewer internodes and shorter length. Significant differences in growth rate betweenPY-9’ andZhengdu’ were detected at approximately 30 days after full bloom, which corresponded with the time of the greatest difference in water potential between the dwarf and normal cultivar.PY-9’ showed a higher photosynthetic rate thanZhengdu’. Anatomical analysis showed thatPY-9’ had higher area ratios of both phloem and xylem and more developed vascular tissues thanZhengdu’. The three-dimensional reconstructed skeleton of the xylem from X-ray computed tomography scanning revealed greater intervessel connectivity inZhengdu’ than inPY-9’, which could contribute to the more vigorous growth ofZhengdu’. This study thus provides the first comparison of the microstructural properties of xylem elements between a dwarfing-type and vigorous-type pear rootstock, providing new insights into the dwarfing mechanism in pear and facilitating breeding of dwarf pear rootstocks to increase crop productivity.展开更多
基金support provided by the National Nature Science Foundation of China (Grant Nos.52075340,51875360)Project of Science and Technology Commission of Shanghai Municipality (No.19060502300).
文摘Gears are pivotal in mechanical drives,and gear contact analysis is a typically difficult problem to solve.Emerging isogeometric analysis(IGA)methods have developed new ideas to solve this problem.In this paper,a threedimensional body parametric gear model of IGA is established,and a theoretical formula is derived to realize single-tooth contact analysis.Results were benchmarked against those obtained from commercial software utilizing the finite element analysis(FEA)method to validate the accuracy of our approach.Our findings indicate that the IGA-based contact algorithmsuccessfullymet theHertz contact test.When juxtaposed with the FEA approach,the IGAmethod demonstrated fewer node degrees of freedomand reduced computational units,all whilemaintaining comparable accuracy.Notably,the IGA method appeared to exhibit consistency in analysis accuracy irrespective of computational unit density,and also significantlymitigated non-physical oscillations in contact stress across the tooth width.This underscores the prowess of IGA in contact analysis.In conclusion,IGA emerges as a potent tool for addressing contact analysis challenges and holds significant promise for 3D gear modeling,simulation,and optimization of various mechanical components.
基金supported by the National Natural Science Foundation of China(72103088)the National Social Science Fund of China(20&ZD094 and 21&ZD101).
文摘Certain outsourcing services for agricultural management in China,such as pest control in grain production,have experienced prolonged sluggishness,contrasting with the relatively high level of outsourcing services observed in harvesting,land preparation,and sowing.This study examines the feasibility of implementing whole-step outsourcing in grain production by conducting a case study of rice and maize production in Jiangsu,Jilin,and Sichuan provinces in China.The provision of outsourcing services hinges on two essential conditions:technological advancements fostering specialized production and economies of scale,coupled with a market size sufficient to realize the aforementioned potential economies of scale.The results showed that outsourcing pest control or harvesting services had varying economies of scale.The outsourcing services in pest control were less common than in harvesting services,and their marginal growth space of the economies of scale with technological change was also smaller.Determined by the operational characteristics of pest control itself,the market scale of its professional services is small.Therefore,achieving the whole-step outsourcing of grain production necessitates not only technological innovation but also effective policy interventions to overcome the constraints of market scale.Such interventions include(1)optimizing crop layouts between planning regions and reducing land fragmentation and(2)supplying timely and effective inter-regional agricultural information for service providers aided by information technology.
基金supported by the Comprehensive Research Facility for Fusion Technology(CRAFT)Program of China(No.2018-000052-73-01-001228)National Natural Science Foundation of China(No.12205330)。
文摘The supercritical CO_(2)cOoled Lithium-Lead(COOL)blanket has been designed as one advanced blanket candidate for the Chinese Fusion Engineering Test Reactor(CFETR).This work focuses on the electromagnetic(EM)loads(Maxwell force and Lorentz force)acting on the COOL blanket,which are important mechanical loads in further structural analysis of the COOL blanket.A 3D electromagnetic analysis is performed using the ANSYS finite element method to obtain EM loads on the COOL blanket in this study.At first,the magnetic scalar potential(MSP)method is used to obtain the magnetic field and the Maxwell force on the COOL blanket.Then,the magnetic vector potential(MVP)method is performed during a plasma disruption event to get the eddy current distribution.At last,a multi-step method is adopted for the calculation of the Lorentz force and the torque.The maximum Lorentz forces of inboard and outboard blanket structural components are 5624 kN and 2360 kN respectively.
基金support from the National Key R&D Program of China(Grant No.2018YFE0118700)the National Natural Science Foundation of China(NSFC Grant No.62174119)+1 种基金the 111 Project(Grant No.B07014)the Foundation for Talent Scientists of Nanchang Institute for Microtechnology of Tianjin University.
文摘DNA methylation has been extensively investigated in recent years,not least because of its known relationship with various diseases.Progress in analytical methods can greatly increase the relevance of DNA methylation studies to both clinical medicine and scientific research.Microflu-idic chips are excellent carriers for molecular analysis,and their use can provide improvements from multiple aspects.On-chip molecular analysis has received extensive attention owing to its advantages of portability,high throughput,low cost,and high efficiency.In recent years,the use of novel microfluidic chips for DNA methylation analysis has been widely reported and has shown obvious superiority to conventional methods.In this review,wefirst focus on DNA methylation and its applications.Then,we discuss advanced microfluidic-based methods for DNA methylation analysis and describe the great progress that has been made in recent years.Finally,we summarize the advantages that microfluidic technology brings to DNA methylation analysis and describe several challenges and perspectives for on-chip DNA methylation analysis.This review should help researchers improve their understanding and make progress in developing microfluidic-based methods for DNA methylation analysis.
基金financially supported by the National Natural Science Foundation of China (Grant Nos.32101571,32002071)the Zhejiang Science and Technology Major Program on Agricultural New Variety Breeding (Grant No.2021C02071-6)。
文摘Lily(Lilium spp.) is an important ornamental flower, which is mainly propagated by bulbs. Cell wall invertases(CWINs), which catalyze the irreversibly conversion of sucrose into glucose and fructose in the extracellular space, are key enzymes participating in sucrose allocation in higher plants. Previous studies have shown that CWINs play an essential role in bulblet initiation process in bulbous crops, but the underlying molecular mechanism remains unclear. Here, a CWIN gene of Lilium brownii var. giganteum(Lbg) was identified and amplified from genomic DNA. Quantitative RT-PCR assays revealed that the expression level of LbgCWIN1 was highly upregulated exactly when the endogenous starch degraded in non-sucrose medium during in vitro bulblet initiation in Lbg. Phylogenetic relationship, motif, and domain analysis of LbgCWIN1 protein and CWINs in other plant species showed that all sequences of these CWIN proteins were highly conserved. The promoter sequence of LbgCWIN1 possessed a number of alpha-amylase-, phytohormone-, light-and stress-responsive cis-elements. Meanwhile, β-glucuronidase(GUS) assay showed that the 459 bp upstream fragment from the translational start site displayed maximal promoter activity. These results revealed that LbgCWIN1 might function in the process of in vitro bulblet initiation and be in the response to degradation of endogenous starch.
文摘The literary review presented in the following paper aims to analyze the tracking tools used in different countries during the period of the COVID-19 pandemic. Tracking apps that have been adopted in many countries to collect data in a homogeneous and immediate way have made up for the difficulty of collecting data and standardizing evaluation criteria. However, the regulation on the protection of personal data in the health sector and the adoption of the new General Data Protection Regulation in European countries has placed a strong limitation on their use. This has not been the case in non-European countries, where monitoring methodologies have become widespread. The textual analysis presented is based on co-occurrence and multiple correspondence analysis to show the contact tracing methods adopted in different countries in the pandemic period by relating them to the issue of privacy. It also analyzed the possibility of applying Blockchain technology in applications for tracking contagions from COVID-19 and managing health data to provide a high level of security and transparency, including through anonymization, thus increasing user trust in using the apps.
基金Supported by the National Basic Research Program of China(2010CB126200)the National Natural Science Foundation of China(30370914)。
文摘Currently,there is no solid criterion for judging the quality of the estimators in factor analysis.This paper presents a new evaluation method for exploratory factor analysis that pinpoints an appropriate number of factors along with the best method for factor extraction.The proposed technique consists of two steps:testing the normality of the residuals from the fitted model via the Shapiro-Wilk test and using an empirical quantified index to judge the quality of the factor model.Examples are presented to demonstrate how the method is implemented and to verify its effectiveness.
文摘Effects of performing an R-factor analysis of observed variables based on population models comprising R- and Q-factors were investigated. Although R-factor analysis of data based on a population model comprising R- and Q-factors is possible, this may lead to model error. Accordingly, loading estimates resulting from R-factor analysis of sample data drawn from a population based on a combination of R- and Q-factors will be biased. It was shown in a simulation study that a large amount of Q-factor variance induces an increase in the variation of R-factor loading estimates beyond the chance level. Tests of the multivariate kurtosis of observed variables are proposed as an indicator of possible Q-factor variance in observed variables as a prerequisite for R-factor analysis.
基金supported by the Notional Natural Science Foundation of China,No.81960417 (to JX)Guangxi Key Research and Development Program,No.GuiKeA B20159027 (to JX)the Natural Science Foundation of Guangxi Zhuang Autonomous Region,No.2022GXNSFBA035545 (to YG)。
文摘Immune changes and inflammatory responses have been identified as central events in the pathological process of spinal co rd injury.They can greatly affect nerve regeneration and functional recovery.However,there is still limited understanding of the peripheral immune inflammato ry response in spinal cord inju ry.In this study.we obtained microRNA expression profiles from the peripheral blood of patients with spinal co rd injury using high-throughput sequencing.We also obtained the mRNA expression profile of spinal cord injury patients from the Gene Expression Omnibus(GEO)database(GSE151371).We identified 54 differentially expressed microRNAs and 1656 diffe rentially expressed genes using bioinformatics approaches.Functional enrichment analysis revealed that various common immune and inflammation-related signaling pathways,such as neutrophil extracellular trap formation pathway,T cell receptor signaling pathway,and nuclear factor-κB signal pathway,we re abnormally activated or inhibited in spinal cord inju ry patient samples.We applied an integrated strategy that combines weighted gene co-expression network analysis,LASSO logistic regression,and SVM-RFE algorithm and identified three biomarke rs associated with spinal cord injury:ANO10,BST1,and ZFP36L2.We verified the expression levels and diagnostic perfo rmance of these three genes in the original training dataset and clinical samples through the receiver operating characteristic curve.Quantitative polymerase chain reaction results showed that ANO20 and BST1 mRNA levels were increased and ZFP36L2 mRNA was decreased in the peripheral blood of spinal cord injury patients.We also constructed a small RNA-mRNA interaction network using Cytoscape.Additionally,we evaluated the proportion of 22 types of immune cells in the peripheral blood of spinal co rd injury patients using the CIBERSORT tool.The proportions of naive B cells,plasma cells,monocytes,and neutrophils were increased while the proportions of memory B cells,CD8^(+)T cells,resting natural killer cells,resting dendritic cells,and eosinophils were markedly decreased in spinal cord injury patients increased compared with healthy subjects,and ANO10,BST1 and ZFP26L2we re closely related to the proportion of certain immune cell types.The findings from this study provide new directions for the development of treatment strategies related to immune inflammation in spinal co rd inju ry and suggest that ANO10,BST2,and ZFP36L2 are potential biomarkers for spinal cord injury.The study was registe red in the Chinese Clinical Trial Registry(registration No.ChiCTR2200066985,December 12,2022).
文摘We investigated the parametric optimization on incremental sheet forming of stainless steel using Grey Relational Analysis(GRA) coupled with Principal Component Analysis(PCA). AISI 316L stainless steel sheets were used to develop double wall angle pyramid with aid of tungsten carbide tool. GRA coupled with PCA was used to plan the experiment conditions. Control factors such as Tool Diameter(TD), Step Depth(SD), Bottom Wall Angle(BWA), Feed Rate(FR) and Spindle Speed(SS) on Top Wall Angle(TWA) and Top Wall Angle Surface Roughness(TWASR) have been studied. Wall angle increases with increasing tool diameter due to large contact area between tool and workpiece. As the step depth, feed rate and spindle speed increase,TWASR decreases with increasing tool diameter. As the step depth increasing, the hydrostatic stress is raised causing severe cracks in the deformed surface. Hence it was concluded that the proposed hybrid method was suitable for optimizing the factors and response.
基金This work is the result of commissioned research project supported by the Affiliated Institute of ETRI(2022-086)received by Junho AhnThis research was supported by the National Research Foundation of Korea(NRF)Basic Science Research Program funded by the Ministry of Education(No.2020R1A6A1A03040583)this work was supported by Korea Institute for Advancement of Technology(KIAT)Grant funded by the Korea government(MOTIE)(P0008691,HRD Program for Industrial Innovation).
文摘This research aims to propose a practical framework designed for the automatic analysis of a product’s comprehensive functionality and security vulnerabilities,generating applicable guidelines based on real-world software.The existing analysis of software security vulnerabilities often focuses on specific features or modules.This partial and arbitrary analysis of the security vulnerabilities makes it challenging to comprehend the overall security vulnerabilities of the software.The key novelty lies in overcoming the constraints of partial approaches.The proposed framework utilizes data from various sources to create a comprehensive functionality profile,facilitating the derivation of real-world security guidelines.Security guidelines are dynamically generated by associating functional security vulnerabilities with the latest Common Vulnerabilities and Exposure(CVE)and Common Vulnerability Scoring System(CVSS)scores,resulting in automated guidelines tailored to each product.These guidelines are not only practical but also applicable in real-world software,allowing for prioritized security responses.The proposed framework is applied to virtual private network(VPN)software,wherein a validated Level 2 data flow diagram is generated using the Spoofing,Tampering,Repudiation,Information Disclosure,Denial of Service,and Elevation of privilege(STRIDE)technique with references to various papers and examples from related software.The analysis resulted in the identification of a total of 121 vulnerabilities.The successful implementation and validation demonstrate the framework’s efficacy in generating customized guidelines for entire systems,subsystems,and selected modules.
基金the financial support through Beijing Natural Science Foundation(Grant No.3212010)National Natural Science Foundation of China(Grant No.51875031).
文摘The rotor is the most important component of rotating machinery,and the vibration produced by its mass unbalance has a serious influence on the secure and steady operation of the machine,so an effective online suppression technology is urgently needed.A new hydraulic unbalanced bionic self-recovery system is introduced,imitating the way of manually repairing faulty equipment.To accomplish the effect of actuator mass redistribution,the technology employs pressurized air to drive the quantitative transfer of liquid in the reservoir cavity at opposite positions.It can complete the online adjustment of the equipment's balancing state and suppress the unbalanced vibration of equipment in real time,which gives the equipment the ability to maintain an autonomous health state and improve equipment performance.The composition and working principle of the system are introduced in detail,and the key performance parameters,such as the minimum running speed and the balancing liquid transfer speed,are analyzed theoretically.The fluid-solid coupling model of the actuator was established,and the two-phase flow from inside the hydraulic unbalanced bionic self-recovery actuator was simulated under multiple working conditions and the performance parameters were quantitatively analyzed.A balancing simulation test bed was built,and its effectiveness was verified by performance parameter tests and unbalanced bionic self-recovery experiments.The experimental results show that the mass distribution adjustment of the balancing disk can be achieved using different viscosity balancing liquid,and the response of liquid viscosity 10 cSt is faster than that of liquid viscosity 100 cSt in the process of balancing liquid transfer,and the time is reduced by more than 75%;the system can reduce the simulated rotor amplitude from 18.3μm to 10.6μm online in real time,which provides technical support for the subsequent development of a new generation of bionic intelligent equipment.
文摘As part of the drive to improve coffee and cocoa production in Ivory Coast, studies are carried out to identify soils that are favourable for these crops. It is therefore necessary to orientate soil investigations based on reliable criteria that best discriminate soil cover. With this in mind, this study is being carried out to help improve survey methods by mapping soil landscapes. It uses GIS and weighted multicriteria analysis. To do this, satellite images were processed and the geological map of the square degrees of M’Bahiakro and Daloa was reclassified. The results show that relief is the main factor in soil landscape differentiation, with respective weights of 0.58 and 0.67 for the forest and pre-forest zones. In contrast, the weight of geological formation in soil landscape differentiation remains low (0.05 for the forest zone and 0.07 for the pre-forest zone). The criteria used on the base of aggregation sum methods have made it possible to formulate soil landscape mapping prediction functions according to agro-ecological environments in the humid intertropical zone. This is essential for the orientation of soil survey work. Nevertheless, other comparative methods, such as the coding mapping method, could provide elements for discussion to validate the models.
基金supported by National Natural Science Foundation of China(82172184)。
文摘BACKGROUND:In clinical practice,some patients might not be able or unwilling to provide a thorough history of medication and poison exposure.The aim of this study was to use toxicological analysis to examine the clinical characteristics of patients with acute poisoning whose exposure history was uncertain from a toxicological analysis perspective.METHODS:This was a retrospective and descriptive study from an institute of poisoning.Patient registration information and test reports spanning the period from April 1,2020 to March 31,2022,were obtained.Patients with uncertain exposure histories and who underwent toxicological analysis were included.Clinical manifestations and categories of toxics were analyzed.RESULTS:Among the 195 patients with positive toxicological analysis results,the main causes of uncertain exposure history was disturbance of consciousness(62.6%),unawareness(23.6%)and unwillingness or lack of cooperation(13.8%).The predominant clinical manifestations were disturbed consciousness(62.6%),followed by vomiting and nausea(14.4%)and liver function abnormalities(8.7%).A comparison of clinical manifestations between patients with positive and negative(n=99)toxicological analyses results revealed significantly different proportions of disturbances in consciousness(63%vs.21%),dizziness(1.5%vs.5.1%),multi-organ failure(1.5%vs.7.1%),and local pain(0 vs 4%).The main categories of substances involved were psychiatric medications(23.1%),sedatives(20.5%),insecticides(13.8%),and herbicides(12.8%).CONCLUSION:The clinical manifestations of acute poisoning in patients with an uncertain exposure history are diverse and nonspecific,and toxicological analysis plays a pivotal role in the diagnosis and differential diagnosis of such patients.
基金the National Natural Science Foundation of China(No.U20A20328).
文摘In this paper,the multi-body coupled dynamic characteristics of a semisubmersible platform and an HYSY 229 barge were investigated.First,coupled hydrodynamic analysis of the HYSY 229 barge and the semisubmersible platform was performed.Relevant hydrodynamic parameters were obtained using the retardation function method of three-dimensional frequency-domain potential flow theory.The results of the hydrodynamic analysis were highly consistent with the test findings,verifying the accuracy of the multifloating hydrodynamic coupling analysis,and key hydrodynamic parameters were solved for different water depths and the coupling effect.According to the obtained results,the hydrodynamic influence was the largest in shallow waters when the coupling effect was considered.Furthermore,the coupled motion equation combined with viscous damping,fender system,and mooring system was established,and the hydrodynamics,floating body motion,and dynamic response of the fender system were analyzed.Motion analysis revealed good agreement among the surge,sway,and yaw motions of the two floating bodies.However,when the wave period reached 10 s,the motion of the two floating bodies showed severe shock,and a relative motion was also observed.Therefore,excessive constraints should be added between the two floating bodies during construction to ensure construction safety.The numerical analysis and model test results of the semisubmersible platform and HYSY 229 barge at a water depth of 42 m and sea conditions of 0°,45°,and 90° were in good agreement,and the error was less than 5%.The maximum movement of the HYSY 229 barge reached 2.61 m in the sway direction,whereas that of the semisubmersible platform was 2.11 m.During construction,excessive constraints should be added between the two floating bodies to limit their relative movement and ensure construction safety.
文摘Condensed and hydrolysable tannins are non-toxic natural polyphenols that are a commercial commodity industrialized for tanning hides to obtain leather and for a growing number of other industrial applications mainly to substitute petroleum-based products.They are a definite class of sustainable materials of the forestry industry.They have been in operation for hundreds of years to manufacture leather and now for a growing number of applications in a variety of other industries,such as wood adhesives,metal coating,pharmaceutical/medical applications and several others.This review presents the main sources,either already or potentially commercial of this forestry by-materials,their industrial and laboratory extraction systems,their systems of analysis with their advantages and drawbacks,be these methods so simple to even appear primitive but nonetheless of proven effectiveness,or very modern and instrumental.It constitutes a basic but essential summary of what is necessary to know of these sustainable materials.In doing so,the review highlights some of the main challenges that remain to be addressed to deliver the quality and economics of tannin supply necessary to fulfill the industrial production requirements for some materials-based uses.
基金the National Natural Science Foundation of China(No.31802297)。
文摘Spatial heterogeneity or“patchiness”of plankton distributions in the ocean has always been an attractive and challenging scientific issue to oceanographers.We focused on the accumulation and dynamic mechanism of the Acetes chinensis in the Lianyungang nearshore licensed fishing area.The Lagrangian frame approaches including the Lagrangian coherent structures theory,Lagrangian residual current,and Lagrangian particle-tracking model were applied to find the transport pathways and aggregation characteristics of Acetes chinensis.There exist some material transport pathways for Acetes chinensis passing through the licensed fishing area,and Acetes chinensis is easy to accumulate in the licensed fishing area.The main mechanism forming this distribution pattern is the local circulation induced by the nonlinear interaction of topography and tidal flow.Both the Lagrangian coherent structure analysis and the particle trajectory tracking indicate that Acetes chinensis in the licensed fishing area come from the nearshore estuary.This work contributed to the adjustment of licensed fishing area and the efficient utilization of fishery resources.
基金This work was supported by Guizhou Provincial Basic Research Program(Natural Science),Grant Number Qiankehejichu-ZK[2021]YB133Guizhou Provincial Scientific and Technological Program,Grant Number Qiankehehoubuzhu[2020]3001National Natural Science Foundation of China-Guizhou Provincial People’s Government Karst Science Research Centre(U1612442).
文摘The contents of carbon(C),nitrogen(N),and phosphorus(P)in soil-microorganisms-plant significantly affect tea quality by altering the main quality components of tea,such as tea polyphenols,amino acids,and caffeine.However,few studies have quantified the effects of these factors on the main quality components of tea.The study aimed to explore the interactions of C,N,and P in soil-microorganisms-plants and the effects of these factors on the main quality components of tea by using the path analysis method.The results indicated that(1)The contents of C,N,and P in soil,microorganisms,and tea plants were highly correlated and collinear,and showed significant correlations with the main quality components of tea.(2)Optimal regression equations were established to esti-mate tea polyphenol,amino acid,catechin,caffeine,and water extract content based on C,N,and P contents in soil,microorganisms,and tea plants(R^(2)=0.923,0.726,0.954,0.848,and 0.883,respectively).(3)Pathway analysis showed that microbial biomass phosphorus(MBP),root phosphorus,branch nitrogen,and microbial biomass carbon(MBC)were the largest direct impact factors on tea polyphenol,catechin,water extracts,amino acid,and caffeine content,respectively.Leaf carbon,root phosphorus,and leaf nitrogen were the largest indirect impact factors on tea polyphenol,catechin,and water extract content,respectively.Leaf carbon indirectly affected tea polyphenol content mainly by altering MBP content.Root phosphorus indirectly affected catechin content mainly by altering soil organic carbon content.Leaf nitrogen indirectly affected water extract content mainly by altering branch nitrogen content.The research results provide the scientific basis for reasonable fertilization in tea gardens and tea quality improvement.
基金supported by grants from the Agriculture Science and Technology of Shandong Province (Grant No.2019YQ015)the Agricultural Variety Improvement Project of Shandong Province (Grant No.2022LZGC011)the earmarked fund for CARS (Grant No.CARS-28-07)。
文摘The lack of a suitable rootstock to control scion growth has limited the development of high-density plantations in pear production, which is partly attributed to poor understanding of the dwarfing mechanism. In the present study, the rootstock of the dwarf-type pear (Pyrus betulaefolia)PY-9’ was identified and used as the material for anatomical analysis.PY-9’ grew to half the tree height of the normal cultivar Zhengdu’, along with fewer internodes and shorter length. Significant differences in growth rate betweenPY-9’ andZhengdu’ were detected at approximately 30 days after full bloom, which corresponded with the time of the greatest difference in water potential between the dwarf and normal cultivar.PY-9’ showed a higher photosynthetic rate thanZhengdu’. Anatomical analysis showed thatPY-9’ had higher area ratios of both phloem and xylem and more developed vascular tissues thanZhengdu’. The three-dimensional reconstructed skeleton of the xylem from X-ray computed tomography scanning revealed greater intervessel connectivity inZhengdu’ than inPY-9’, which could contribute to the more vigorous growth ofZhengdu’. This study thus provides the first comparison of the microstructural properties of xylem elements between a dwarfing-type and vigorous-type pear rootstock, providing new insights into the dwarfing mechanism in pear and facilitating breeding of dwarf pear rootstocks to increase crop productivity.