期刊文献+
共找到1,145篇文章
< 1 2 58 >
每页显示 20 50 100
A hybrid stochastic fractal search and pattern search technique based cascade PI-PD controller for automatic generation control of multi-source power systems in presence of plug in electric vehicles 被引量:1
1
作者 Sasmita Padhy Sidhartha Panda 《CAAI Transactions on Intelligence Technology》 2017年第1期12-25,共14页
A hybrid Stochastic Fractal Search plus Pattern Search (hSFS-PS) based cascade PI-PD controller is suggested in this paper for Automatic Generation Control (AGC) of thermal, hydro and gas power unit based power sy... A hybrid Stochastic Fractal Search plus Pattern Search (hSFS-PS) based cascade PI-PD controller is suggested in this paper for Automatic Generation Control (AGC) of thermal, hydro and gas power unit based power systems in presence of Plug in Electric Vehicles (PEV). Firstly, a single area multi-source power system consisting of thermal hydro and gas power plants is considered and parameters of Integral (I) controller is optimized by Stochastic FractaI Search (SFS) algorithm. The superiority of SFS algorithm over some recently proposed approaches such as optimal control, differential evolution and teaching learning based optimization techniques is demonstrated by comparing simulation results for the identical power system. To improve the system performance further, Pattern Search (PS) is subsequently employed. The study is further extended for different controllers like PI, PID, and cascaded PI-PD controller and the superiority of cascade PI-PD controller over conventional controllers is demonstrated. Then, cascade PI- PD controller parameters of AGC searched using the proposed hSFS-PS algorithm in presence of plug in electric vehicles. The study is also extended to an interconnected power system. It is seen from the comparative analysis that hSFS-PS tuned PI-PD controller in single and multi-area with multi sources improves the system frequency stability in complicated situations. Lastly, a three area interconnected system with PEVs with dissimilar cascade PI-PD controller in each area is considered and proposed hSFS- PS algorithm is used to tune the controller parameters in presence of nonlinearities like rate constraint of units, dead zone of governor and communication delay. 展开更多
关键词 automatic generation control Cascade PI-PD controller Stochastic fractal search Pattern search Plug in electric vehicles
下载PDF
Neural-Fuzzy-Based Adaptive Sliding Mode Automatic Steering Control of Vision-based Unmanned Electric Vehicles 被引量:2
2
作者 Jinghua Guo Keqiang Li +2 位作者 Jingjing Fan Yugong Luo Jingyao Wang 《Chinese Journal of Mechanical Engineering》 SCIE EI CAS CSCD 2021年第5期56-68,共13页
This paper presents a novel neural-fuzzy-based adaptive sliding mode automatic steering control strategy to improve the driving performance of vision-based unmanned electric vehicles with time-varying and uncertain pa... This paper presents a novel neural-fuzzy-based adaptive sliding mode automatic steering control strategy to improve the driving performance of vision-based unmanned electric vehicles with time-varying and uncertain parameters.Primarily,the kinematic and dynamic models which accurately express the steering behaviors of vehicles are constructed,and in which the relationship between the look-ahead time and vehicle velocity is revealed.Then,in order to overcome the external disturbances,parametric uncertainties and time-varying features of vehicles,a neural-fuzzy-based adaptive sliding mode automatic steering controller is proposed to supervise the lateral dynamic behavior of unmanned electric vehicles,which includes an equivalent control law and an adaptive variable structure control law.In this novel automatic steering control system of vehicles,a neural network system is utilized for approximating the switching control gain of variable structure control law,and a fuzzy inference system is presented to adjust the thickness of boundary layer in real-time.The stability of closed-loop neural-fuzzy-based adaptive sliding mode automatic steering control system is proven using the Lyapunov theory.Finally,the results illustrate that the presented control scheme has the excellent properties in term of error convergence and robustness. 展开更多
关键词 Vision-based unmanned electric vehicles automatic steering Neural-fuzzy adaptive sliding control Vehicle lateral dynamics
下载PDF
Research and Development of Engine-Generator Set Control System for Tracked Vehicle Electric Transmission System 被引量:1
3
作者 黄英 黄千 +2 位作者 孙逢春 刘波澜 刘嘉 《Defence Technology(防务技术)》 SCIE EI CAS 2007年第3期179-184,共6页
As an energy generating equipment, the engine-generator set supplies power to the electric transmission. Therefore, its control is one of the key technologies of electric vehicles. Based on the discussion about the de... As an energy generating equipment, the engine-generator set supplies power to the electric transmission. Therefore, its control is one of the key technologies of electric vehicles. Based on the discussion about the demands to the engine-generator set in tracked vehicles, the detailed function of engine-generator and the control strategy are determined. The hardware and software of the control system are also developed and tested in a prototype vehicle. The experiment results show that the control system has good reliability and can satisfy the power requirements of vehicles under all operating conditions. 展开更多
关键词 自动控制技术 电力传输 汽车发动机 控制理论
下载PDF
Hopf Bifurcation Analysis and Control for Electrical System of Military Vehicle
4
作者 王宝华 杨成梧 《Defence Technology(防务技术)》 SCIE EI CAS 2009年第4期246-250,共5页
Electrical system of military vehicle is a typical parameterized nonlinear system where complicated bifurcations may exist and threaten its safe and stable operation. An algebraic criterion for Hopf bifurcation is pre... Electrical system of military vehicle is a typical parameterized nonlinear system where complicated bifurcations may exist and threaten its safe and stable operation. An algebraic criterion for Hopf bifurcation is presented briefly and applied to find Hopf bifurcation point of the electrical system with automatic voltage regulator(AVR) dynamics in military vehicle. Hopf bifurcation controllers are designed for this electrical system by using wash-out filter,linear feedback,nonlinear feedback and their combination. The linear feedback control makes the system bring Hopf bifurcation at preferable parameter,the nonlinear feedback control modifies the type of the bifurcation,and the wash-out filter enhances the system damping,thus,the Hopf bifurcation is eliminated and the electrical system stability is ensured. Simulation results show the controller's validity. 展开更多
关键词 automatic control technology electrical system of military vehicles Hopf bifurcation bifurcation control STABILITY
下载PDF
The Application of Principle of Automatic Control in the site Management of Electric Power Construction Enterprise
5
作者 Bowen Wang 《Journal of Electronic Research and Application》 2020年第3期20-23,共4页
It is need to establish site project department during the construction of electric power project.The head office should design and build the main structure,continually improve structure of project department,meantime... It is need to establish site project department during the construction of electric power project.The head office should design and build the main structure,continually improve structure of project department,meantime,positively apply principle of automatic control to improve the site management of electric power construction.In this article,the application strategy of principle of automatic control is analyzed focusing on the site work of electric power construction. 展开更多
关键词 Principle of automatic control electric power construction CONSTRUCTION Site management
下载PDF
OPTIMAL TORQUE CONTROL STRATEGY FOR PARALLEL HYBRID ELECTRIC VEHICLE WITH AUTOMATIC MECHANICAL TRANSMISSION 被引量:12
6
作者 GU Yanchun YIN Chengliang ZHANG Jianwu 《Chinese Journal of Mechanical Engineering》 SCIE EI CAS CSCD 2007年第1期16-20,共5页
In parallel hybrid electrical vehicle (PHEV) equipped with automatic mechanical transmission (AMT), the driving smoothness and the clutch abrasion are the primary considerations for powertrain control during gears... In parallel hybrid electrical vehicle (PHEV) equipped with automatic mechanical transmission (AMT), the driving smoothness and the clutch abrasion are the primary considerations for powertrain control during gearshift and clutch operation. To improve these performance indexes of PHEV, a coordinated control system is proposed through the analyzing of HEV powertrain dynamic characteristics. Using the method of minimum principle, the input torque of transmission is optimized to improve the driving smoothness of vehicle. Using the methods of fuzzy logic and fuzzy-PID, the engaging speed of clutch and the throttle opening of engine are manipulated to ensure the smoothness of clutch engagement and reduce the abrasion of clutch friction plates. The motor provides the difference between the required input torque of transmission and the torque transmitted through clutch plates. Results of simulation and experiments show that the proposed control strategy performs better than the contrastive control system, the smoothness of driving and the abrasion of clutch can be improved simultaneously. 展开更多
关键词 Parallel hybrid electric vehicle (PHEV) automatic mechanical transmission (AMT) Driving smoothness Clutch abrasion Optimal control Fuzzy logic control
下载PDF
Design and application of electric oil pump in automatic transmission for efficiency improvement and start–stop function 被引量:1
7
作者 刘艳芳 董鹏 +1 位作者 刘洋 徐向阳 《Journal of Central South University》 SCIE EI CAS CSCD 2016年第3期570-580,共11页
For the purpose of improving efficiency and realizing start–stop function, an electric oil pump(EOP) is integrated into an 8-speed automatic transmission(AT). A mathematical model is built to calculate the transmissi... For the purpose of improving efficiency and realizing start–stop function, an electric oil pump(EOP) is integrated into an 8-speed automatic transmission(AT). A mathematical model is built to calculate the transmission power loss and the hydraulic system leakage. Based on this model, a flow-based control strategy is developed for EOP to satisfy the system flow requirement. This control strategy is verified through the forward driving simulation. The results indicate that there is a best combination for the size of mechanical oil pump(MOP) and EOP in terms of minimum energy consumption. In order to get a quick and smooth starting process, control strategies of the EOP and the on-coming clutch are proposed. The test environment on a prototype vehicle is built to verify the feasibility of the integrated EOP and its control strategies. The results show that the selected EOP can satisfy the flow requirement and a quick and smooth starting performance is achieved in the start–stop function. This research has a high value for the forward design of EOP in automatic transmissions with respect to efficiency improvement and start–stop function. 展开更多
关键词 automatic transmission electric oil pump mechanical oil pump start-stop function efficiency improvement forwarddriving simulation control strategy
下载PDF
Study on Modeling and Control Strategy for Electric Drive Motor of Tracked Vehicles 被引量:1
8
作者 廖自力 黄苏融 +1 位作者 马晓军 庞宾宾 《Defence Technology(防务技术)》 CAS 2012年第2期65-69,共5页
Aimed at the requirements for electric transmission system of a military tracked vehicle, the motor's design indexes were analysed and calculated. A model based on saturate inductance parameter of interior permane... Aimed at the requirements for electric transmission system of a military tracked vehicle, the motor's design indexes were analysed and calculated. A model based on saturate inductance parameter of interior permanent magnet (IPM) synchronous motor was brought forward by using finite element analysis. And its control strategy based on the largest running capability was studied also. The experiment results for a scale model show that the modelling method improves the model's accuracy, and the motor's control strategy is effective. 展开更多
关键词 军用履带车辆 控制策略 驱动电机 建模方法 电传动系统 有限元分析 电感参数 同步电机
下载PDF
Analysis of Small Oscillations in Complex Electric Power Systems
9
作者 Allaev Kaxramon Raximovich Makhmudov Tokhir Farkhadovich 《Engineering(科研)》 2018年第5期253-261,共9页
In this article the mathematical model of complex regulated electric system in matrix form is developed. This mathematical model makes it possible to study the steady-state stability of a complex electrical system by ... In this article the mathematical model of complex regulated electric system in matrix form is developed. This mathematical model makes it possible to study the steady-state stability of a complex electrical system by determining the eigenvalues of the dynamics matrix. The model of an electrical system that reflects transient processes for small deviations is convenient, both algorithmically and computationally, in particular, in cases of their joint solution with steady-state equations—the equations of nodal voltages. The obtained results in the form of the eigenvalues of the matrix spectrum are qualitatively the same as the results of classical studies, which is a consequence of the adequacy of the proposed model and the correct reflection of the dynamic processes occurring in a real electrical system. In addition, the equations obtained are of independent importance for the analysis of various modes, including transient, electrical systems of any complexity. 展开更多
关键词 electric system SMALL OSCILLATIONS automatic EXCITATION control MATRIX MATRIX SPECTRUM
下载PDF
烟草钵苗双盘对称交错式自动取苗装置设计与试验
10
作者 陈斌 邹鑫 +3 位作者 何阳 余贝 向鹏华 肖名涛 《中国农机化学报》 北大核心 2024年第7期22-27,共6页
为解决烟草半移栽作业用工量大、效益低等问题,设计一种对称交错式自动取苗装置。首先,阐述该自动取苗装置对两盘钵苗进行交错式取苗的原理,建立取投苗作业过程中的动力学和运动学模型。然后,对送盘装置、取投苗装置和自动控制系统等取... 为解决烟草半移栽作业用工量大、效益低等问题,设计一种对称交错式自动取苗装置。首先,阐述该自动取苗装置对两盘钵苗进行交错式取苗的原理,建立取投苗作业过程中的动力学和运动学模型。然后,对送盘装置、取投苗装置和自动控制系统等取苗装置关键部件进行结构设计,分析关键部件的作业过程,结合实际需求完成关键元器件的选型。最后,在已有移栽机动力底盘的基础上试制2ZY-1型烟草移栽机样机,以60天苗龄的烟草钵苗为作业对象进行田间取投苗性能试验。试验结果表明,在自动取投苗速度为20株/min时,取苗成功率为89.63%,投苗成功率为97.20%,伤苗率为3.59%。 展开更多
关键词 烟草钵苗 自动移栽 漂浮秧盘 取苗装置 电控系统
下载PDF
PLC技术在煤矿电气工程自动化控制中的应用
11
作者 张雅婕 杨洁 《现代工业经济和信息化》 2024年第9期149-151,共3页
为进一步探究煤矿电气工程自动化控制水平的提升路径,结合煤矿井下皮带机设备的电气自动化控制工作需要,以PLC技术为核心,构建面向皮带机的煤矿电气工程自动化控制系统,并对系统的控制站、通信功能、远程监控、人机交互等各方面的功能... 为进一步探究煤矿电气工程自动化控制水平的提升路径,结合煤矿井下皮带机设备的电气自动化控制工作需要,以PLC技术为核心,构建面向皮带机的煤矿电气工程自动化控制系统,并对系统的控制站、通信功能、远程监控、人机交互等各方面的功能均进行详细设计,以实现系统功能。从现场测试效果来看,该系统能够实现对皮带机的有效监控,表明该系统具有一定的应用价值。 展开更多
关键词 PLC技术 电气工程 自动控制
下载PDF
基于PLC的全自动码垛机电气控制系统设计研究
12
作者 李福武 《电气传动自动化》 2024年第4期22-27,共6页
自动码垛机需要实现多轴运动控制,包括各种传动部件的精确控制和同步。需要考虑运动规划、速度控制、位置反馈等方面,这使得确保系统的稳定性和精度难度较高。为此,设计基于PLC的全自动码垛机电气控制系统。首先,通过PLC、传感器、执行... 自动码垛机需要实现多轴运动控制,包括各种传动部件的精确控制和同步。需要考虑运动规划、速度控制、位置反馈等方面,这使得确保系统的稳定性和精度难度较高。为此,设计基于PLC的全自动码垛机电气控制系统。首先,通过PLC、传感器、执行器、操作面板和人机界面、电源和电气元完成系统的整体硬件的设计;其次,设计自动取料模块和速度电气控制器。对于系统软件部分,先设计PLC梯形图。基于此,结合抗扰电气控制器原理,再设计全自动码垛机的鲁棒电气控制算法。实验结果表明,所设计系统能够精准跟踪全自动码垛机机械臂的关节轨迹,说明该系统的电气控制效果较好,且具有理想的抗干扰性。 展开更多
关键词 PLC 全自动码垛机 电气控制 系统设计
下载PDF
化工企业电气仪表自动化控制技术的运用 被引量:3
13
作者 梁博 王晓萍 《化工管理》 2024年第5期57-59,共3页
电气仪表自动控制系统的发展,离不开信息技术的支持,它能够为化工企业的设备装置提供技术保障,还可以带动电气仪表自动化的发展。在现代化生产作业中,研究和开发自动化技术,能够促进工业发展。特别是通过智能化自动控制技术的应用,可进... 电气仪表自动控制系统的发展,离不开信息技术的支持,它能够为化工企业的设备装置提供技术保障,还可以带动电气仪表自动化的发展。在现代化生产作业中,研究和开发自动化技术,能够促进工业发展。特别是通过智能化自动控制技术的应用,可进一步提升电气仪表的安全运行效果、增加企业的经济效益。 展开更多
关键词 电气仪表 自动化控制 化工企业
下载PDF
考虑部件振动特性的电炉异步电机电气控制方法 被引量:1
14
作者 武重 卢阳 《工业加热》 CAS 2024年第4期30-34,共5页
异步电机的驱动系统在运行过程中呈现出高度非线性、强耦合和多变量等特点,转子磁链电压及电流参数难以确定,使得控制误差及稳定性较差。为此,提出考虑部件振动特性的电炉异步电机电气控制方法。通过对电炉异步电机径向磁拉力的分析,了... 异步电机的驱动系统在运行过程中呈现出高度非线性、强耦合和多变量等特点,转子磁链电压及电流参数难以确定,使得控制误差及稳定性较差。为此,提出考虑部件振动特性的电炉异步电机电气控制方法。通过对电炉异步电机径向磁拉力的分析,了解电炉异步电机部件振动的特性,基于部件振动特性,了解转子磁链电压和电流的变化规律,并将采集到的转子磁链电压及电流信息作为输入信号,提供给PID控制器进行电炉异步电机电气控制。实验结果表明,所提方法的位置控制误差基本为0,电压的控制曲线平稳,说明所提方法精度高稳定性强,具有实用性。 展开更多
关键词 部件振动 电炉异步电机 电气控制 径向磁拉力 PID控制器
下载PDF
煤矿井下水力压裂自动控制系统设计 被引量:1
15
作者 刘波 《工矿自动化》 CSCD 北大核心 2024年第3期6-13,共8页
分析指出目前煤矿井下水力压裂技术面临压裂泵输出压力和流量无法快速精确调节、远程安全监控效果及自动化水平有待提高等难题。设计了一种煤矿井下水力压裂自动控制系统。根据煤矿井下水力压裂工艺及系统构成,明确了控制系统关键技术... 分析指出目前煤矿井下水力压裂技术面临压裂泵输出压力和流量无法快速精确调节、远程安全监控效果及自动化水平有待提高等难题。设计了一种煤矿井下水力压裂自动控制系统。根据煤矿井下水力压裂工艺及系统构成,明确了控制系统关键技术为高压大流量压裂泵输出流量和压力的快速精确调节,远程高可靠性安全、高速实时监控,一键启停及图形化分析等。以KXH12本安型控制器为核心,搭配变频器、组合开关、监控主机、电动开度球阀等设备,以及光纤加CAN总线的双线冗余通信方案,研发了控制系统硬件,并编制了压裂泵控制器、水箱控制器及中央控制器软件,实现了压裂系统快速变流量注水、稳定保压及远程高速实时监控和报警等功能。在煤矿现场对水力压裂自动控制系统进行工业性试验,结果表明该系统压力控制精度为0.1 MPa,流量控制精度为0.1 m3/h,在连续完成14次压裂过程中,每次煤岩层开裂后均能实现较好的保压效果,且操作简单,安全性高,满足煤矿井下水力压裂工艺要求。 展开更多
关键词 矿井水力压裂 压裂流量控制 压裂压力控制 远程自动控制 变频电力驱动
下载PDF
纯电动装载机坡道防溜策略
16
作者 胡珑渝 纪少波 +2 位作者 吕承举 刘振革 张珂 《江苏大学学报(自然科学版)》 CAS 北大核心 2024年第4期381-386,共6页
根据纯电动装载机传动系统特性,基于装载机运行参数和行走电动机控制器上传至整车控制器的转矩和转速,制定了坡道防溜控制策略.由整车控制器确定纯电动装载机进入防溜模式的条件,并采用比例-积分(proportional-integral,PI)算法计算防... 根据纯电动装载机传动系统特性,基于装载机运行参数和行走电动机控制器上传至整车控制器的转矩和转速,制定了坡道防溜控制策略.由整车控制器确定纯电动装载机进入防溜模式的条件,并采用比例-积分(proportional-integral,PI)算法计算防溜模式时下发至行走电动机控制器的目标转矩,使装载机可在无踏板动作时稳定在坡上.基于Simulink搭建纯电动装载机坡道防溜控制算法模型,使用Simulink自动代码生成技术生成可应用于整车控制器的程序并进行试验验证及参数优化,使用装载机在坡上停车和坡上起步阶段的溜车距离分析坡道防溜效果.结果表明:所制定的坡道防溜策略在各坡度坡道上可有效驻坡;坡度为30%时,装载机在坡上停车的最大溜车距离为8.0 cm,在坡上起步的最大溜车距离为4.0 cm,可满足安全驻坡要求. 展开更多
关键词 纯电动装载机 整车控制器 坡道防溜 SIMULINK 自动代码生成 PI算法
下载PDF
PLC技术在电气工程及其自动化控制系统中的应用 被引量:1
17
作者 王曦 《中国高新科技》 2024年第7期53-55,共3页
为进一步发挥PLC技术在电气工程及其自动化控制系统中的应用价值,文章分析了PLC技术的应用优势,从顺序控制、开关量控制、闭环控制、模拟量控制4个方面分析了PLC技术的具体应用。为进一步优化电气工程及其自动化控制系统,还需积极拓展... 为进一步发挥PLC技术在电气工程及其自动化控制系统中的应用价值,文章分析了PLC技术的应用优势,从顺序控制、开关量控制、闭环控制、模拟量控制4个方面分析了PLC技术的具体应用。为进一步优化电气工程及其自动化控制系统,还需积极拓展应用场景,加强抗干扰改造,实现电气设备智能升级。通过落实上述措施,有助于提高电气自动化系统的可靠性,保障电气系统稳定运行。 展开更多
关键词 电气工程 自动化控制系统 PLC技术
下载PDF
煤矿架空乘人装置PLC电气自动控制系统功能分析与设计 被引量:1
18
作者 高希睿 《当代化工研究》 CAS 2024年第1期125-127,共3页
煤炭行业属于我国重要的能源支柱行业,在煤炭开采过程中,辅助运输是非常重要的,其工作质量能够直接影响整个煤炭开采的生产效率。架空乘人装置属于重要的人员辅助运输设备,近年来受到了矿山企业的普遍重视,也是矿井现代化建设的重要指... 煤炭行业属于我国重要的能源支柱行业,在煤炭开采过程中,辅助运输是非常重要的,其工作质量能够直接影响整个煤炭开采的生产效率。架空乘人装置属于重要的人员辅助运输设备,近年来受到了矿山企业的普遍重视,也是矿井现代化建设的重要指标内容,对其进行研究具有一定现实意义。本文结合可编程控制器技术(Programmable Logic Controller,PLC),进行了煤矿架空乘人装置PLC电气自动控制系统设计与程序设计,并取得了一定研究成果,希望本文的研究内容能够为煤矿架空乘人装置系统设计提供一定理论支持。 展开更多
关键词 架空乘人装置 PLC技术 电气自动控制系统 集中控制
下载PDF
基于PLC技术的农业机械电气自动控制的应用 被引量:3
19
作者 缪继鹏 《新疆农机化》 2024年第1期20-22,共3页
我国信息化发展进程的加快,对各个行业产生了深远的影响。PLC技术应用于农业生产领域中可实现农业自动化,进一步扩大农业的生产规模,大大提升农业行业的生产效率,推动我国传统农业产业向现代化农业转型升级。为此,本文对PLC技术应用至... 我国信息化发展进程的加快,对各个行业产生了深远的影响。PLC技术应用于农业生产领域中可实现农业自动化,进一步扩大农业的生产规模,大大提升农业行业的生产效率,推动我国传统农业产业向现代化农业转型升级。为此,本文对PLC技术应用至农业机械电气自动控制的相关内容进行探究,旨在促进农业大规模自动化产业发展,为农业现代化建设提供参考。 展开更多
关键词 PLC技术 农业机械 电气自动控制
下载PDF
基于记忆截割的采煤机自适应控制技术研究 被引量:2
20
作者 闫文杰 《江西煤炭科技》 2024年第1期187-189,共3页
随着煤炭行业发展,煤炭智能化开采技术已不断应用于实践中,采煤机作为煤矿主要开采设备,其智能化功能及控制方式成为目前主要研究方向。针对西铭矿现有采煤机在智能控制方面存在的不足,制定了具有智能化功能的电牵引采煤机分布式自适应... 随着煤炭行业发展,煤炭智能化开采技术已不断应用于实践中,采煤机作为煤矿主要开采设备,其智能化功能及控制方式成为目前主要研究方向。针对西铭矿现有采煤机在智能控制方面存在的不足,制定了具有智能化功能的电牵引采煤机分布式自适应控制方案,采用GIS系统对采煤机及煤层进行定位识别,并通过记忆截割模型与人工修正相结合的方式实现了根据煤层变化自动调节滚筒高度及摇臂角度,对于提高采煤机智能化水平具有实际应用价值。 展开更多
关键词 电牵引采煤机 自适应控制 地理信息(GIS)系统 滚筒自动调节
下载PDF
上一页 1 2 58 下一页 到第
使用帮助 返回顶部