A submerged cavitation water jet(SCWJ)is an effective method to recycle solid propellant from obsolete solid engines by the breaking method.Solid propellant's breaking modes and mechanical process under SCWJ impac...A submerged cavitation water jet(SCWJ)is an effective method to recycle solid propellant from obsolete solid engines by the breaking method.Solid propellant's breaking modes and mechanical process under SCWJ impact are unclear.This study aims to understand those impact breaking mechanisms.The hydroxyl-terminated polybutadiene(HTPB)propellant was chosen as the research material,and a self-designed test system was used to conduct impact tests at four different working pressures.The high-speed camera characterized crack propagation,and the DIC method calculated strain change during the impact process.Besides,micro and macro fracture morphologies were characterized by scanning electron microscope(SEM)and computed tomography(CT)scanning.The results reveal that the compressive strain concentration region locates right below the nozzle,and the shear strain region distributes symmetrically with the jet axis,which increases to 4% at first 16th ms,the compressive strain rises to 2% and 6% in the axial and transverse direction,respectively.The two tensile cracks formed first at the compression strain concentrate region,and there generate many shear cracks around the tensile cracks,and those shear cracks that develop and aggregate cause the cracks to become wider and cut through the tensile cracks,forming the tensile-shear cracks and the impact parts eventually fail.The HTPB propellant forms a breaking hole shaped conical after impact 10 s.The mass loss increases by 17 times at maximum,with the working pressure increasing by three times.Meanwhile,the damage value of the breaking hole remaining on the surface increases by 7.8 times while 2.9 times in the depth of the breaking hole.The breaking efficiency is closely affected by working pressures.The failure modes of HTPB impacted by SCWJ are classified as tensile crack-dominated and tensile-shear crack-dominated damage mechanisms.展开更多
Topologically nontrivial Fe-based superconductors attract extensive attentions due to their ability of hosting Majorana zero modes(MZMs)which could be used for topological quantum computation.Topological defects such ...Topologically nontrivial Fe-based superconductors attract extensive attentions due to their ability of hosting Majorana zero modes(MZMs)which could be used for topological quantum computation.Topological defects such as vortex lines are required to generate MZMs.Here,we observe the robust edge states along the surface steps of CaKFe_(4)As_(4).Remarkably,the tunneling spectra show a sharp zero-bias peak(ZBP)with multiple integerquantized states at the step edge under zero magnetic field.We propose that the increasing hole doping around step edges may drive the local superconductivity into a state with possible spontaneous time-reversal symmetry breaking.Consequently,the ZBP can be interpreted as an MZM in an effective vortex in the superconducting topological surface state by proximity to the center of a tri-junction with different superconducting order parameters.Our results provide new insights into the interplay between topology and unconventional superconductivity,and pave a new path to generate MZMs without magnetic field.展开更多
China’s Olympic delegation at the Paris 2024,with 404 athletes competing in 232 events across 30 sports,clinched 40 gold,27 silver,and 24 bronze medals,marking their best performance at an Olympics held abroad.The su...China’s Olympic delegation at the Paris 2024,with 404 athletes competing in 232 events across 30 sports,clinched 40 gold,27 silver,and 24 bronze medals,marking their best performance at an Olympics held abroad.The success of these athletes across various disciplines demonstrates the country’s efforts to expand its athletic prowess while also marks a new chapter for Chinese sportsmanship on the international stage.展开更多
Smartex,a trailblazing leader in textile industry innovation,was proud to announce its return to ITM 2024,showcasing unparalleled advancements in quality control and production efficiency.Building on the success of pr...Smartex,a trailblazing leader in textile industry innovation,was proud to announce its return to ITM 2024,showcasing unparalleled advancements in quality control and production efficiency.Building on the success of previous exhibitions at ITM 2022 and ITMA Milan 2023,Smartex emerges stronger than ever,presenting its complete Smartex System tailored to transform textile manufacturing.展开更多
Organic solar cells(OSCs) especially non-fullerene OSCs(NF-OSCs) are promising to become the next-generation of commercial applications and have received great attention from many researchers due to their typical adva...Organic solar cells(OSCs) especially non-fullerene OSCs(NF-OSCs) are promising to become the next-generation of commercial applications and have received great attention from many researchers due to their typical advantages of low cost,light weight,and flexibility [1,2].展开更多
When the traditional drill and blast method is applied to rock crushing projects,it has strong vibration,loud noise and dust pollution,so it cannot be used in densely populated areas such as urban public works.We deve...When the traditional drill and blast method is applied to rock crushing projects,it has strong vibration,loud noise and dust pollution,so it cannot be used in densely populated areas such as urban public works.We developed a supercritical CO_(2)true triaxial pneumatic rock-breaking experimental system,and conducted laboratory and field tests of dry ice powder pneumatic rock-breaking.The characteristics of the blast-induced vibration velocity waveform and the evolution of the vibration velocity and frequency with the focal distance were analyzed and discussed.The fracturing mechanism of dry ice powder pneumatic rock breaking is studied.The research results show that:(1)The vibration velocity induced by dry ice powder pneumatic rock breaking decays as a power function with the increase of the focal distance;(2)The vibration frequency caused by dry ice powder pneumatic rock breaking is mainly distributed in 1–120 Hz.Due to the dispersion effect,the dominant frequency of 10–30 Hz appears abnormally attenuated;(3)The traditional CO_(2)phase change fracturing energy calculation formula is also applicable to dry ice pneumatic rock breaking technology,and the trinitrotoluene(TNT)equivalent of fracturing energy is applicable to the Sadovsky formula;(4)Dry ice powder pneumatic rock breaking is shock wave and highenergy gas acting together to fracture rock,which can be divided into three stages,among which the gas wedge action of high-energy gas plays a dominant role in rock mass damage.展开更多
The operation of a shield tunnel boring machine(TBM)in a high-strength hard rock stratum results in significant cutter damage,adversely affecting the thrust and torque of the cutter head.Therefore,it is very important...The operation of a shield tunnel boring machine(TBM)in a high-strength hard rock stratum results in significant cutter damage,adversely affecting the thrust and torque of the cutter head.Therefore,it is very important to carry out the research on the stress characteristics and optimize the cutter parameters of cutters break high-strength hard rock.In this paper,the rock-breaking performance of cutters in an andesite stratum in the tunnel of Qingdao Metro Line No.8 was investigated using the discrete element method and theoretical analysis.The rock-breaking processes of a disc cutter and wedge tooth cutter were simulated by software particle flow code PFC^(3D),and the rock-breaking degree,stress of the cutter,and rock-breaking specific energy were analyzed.The rock damage caused by the cutter in a specific section was divided into three stages:the advanced influence,crushing,and stabilizing stages.The rock-breaking degree and the tangential and normal forces of the wedge tooth cutter are larger than that of the disc cutter under the same conditions.The disc cutter(wedge tooth cutter)has the highest rock-breaking efficiency at a cutter spacing of 100 mm(110 mm)and a penetration depth of 8 mm(10 mm),and the rock-breaking specific energy is 11.48 MJ/m^(3)(12.05 MJ/m^(3)).Therefore,two types of cutters with different penetration depths or cutter spacing should be considered.The number of teeth of wedge tooth cutters can be increased in hard strata to improve the rock-breaking efficiency of the shield.The research results provide a reference for shield cutterhead selection and cutter layout in similar projects.展开更多
To improve the rock breaking ability, cavitating waterjet and abrasive waterjet are combined by using a coaxial low-speed waterjet generated around the periphery of a high-speed abrasive waterjet, and a new type of wa...To improve the rock breaking ability, cavitating waterjet and abrasive waterjet are combined by using a coaxial low-speed waterjet generated around the periphery of a high-speed abrasive waterjet, and a new type of waterjet called unsubmerged cavitating abrasive waterjet(UCAWJ) is thus produced. The rock breaking performance of UCAWJ was compared with submerged cavitating abrasive waterjet(SCAWJ)and unsubmerged abrasive waterjet(UAWJ) by impinging sandstone specimens. Moreover, the effects of jet pressure, standoff distance, abrasive flow rate and concentration were studied by evaluating the specific energy consumption, and the area, depth, and mass loss of the eroded specimen. The results show that the artificially generated submerged environment in UCAWJ is able to enhance the rock breaking performance under the same operating parameters. Furthermore, the rock breaking performance of UCAWJ is much better at higher jet pressures and smaller standoff distances when compared with UAWJ. The greatest rock breaking ability of UCAWJ appears at jet pressure of 50 MPa and standoff distance of 32 mm, with the mass loss of sandstone increased by 370.6% and the energy dissipation decreased by 75.8%. In addition, under the experimental conditions the optimal abrasive flow rate and concentration are 76.5 m L/min and 3%, respectively.展开更多
The sixth China International Import Expo(CIIE),the world’s first national-level import-themed expo,saw a total of 78.41 billion U.S.dollars’worth of tentative deals reached for one-year purchases of goods and servi...The sixth China International Import Expo(CIIE),the world’s first national-level import-themed expo,saw a total of 78.41 billion U.S.dollars’worth of tentative deals reached for one-year purchases of goods and services,setting a record high.展开更多
This study investigates the factors affecting the rock-breaking efficiency of the TBM disc cutter in deep rock excavation,including confining pressure,penetration,cutter spacing,and revolution speed.The finite element...This study investigates the factors affecting the rock-breaking efficiency of the TBM disc cutter in deep rock excavation,including confining pressure,penetration,cutter spacing,and revolution speed.The finite element method is employed to formulate a rock-breaking model of the rotary disc cutters and a numerical simulation is also implemented.The rock breaking effect,rock breaking volume,and rock breaking specific energy consumption under different combinations of the factors are investigated.An orthogonal test of four factors at four levels was constructed.Based on the test results and range analysis in the process of deep rock mass breaking,the order of sensitivity of each influencing factor with respect to the rock breaking specific energy for the disc cutter is cutter spacing>revolution speed>penetration>confining pressure.By constructing a numerical simulation comparison scheme,the orthogonal test results are analyzed and corroborated,and the rock breaking law and rock breaking efficiency under different influencing factors are derived.Finally,the sensitivity of different influencing factors on the rock-breaking efficiency is verified.展开更多
Knowledge on intermittency of wave breaking is so far limited to a few summary statistics, while the probability distribution of time interval between breaking events can provide a full view of intermittency. Based on...Knowledge on intermittency of wave breaking is so far limited to a few summary statistics, while the probability distribution of time interval between breaking events can provide a full view of intermittency. Based on a series of experiments on wind wave breaking, such probability distributions are investigated. Breaking waves within a wave group were taken as a single breaking event according to recent studies. Interval between successive wave groups with breaker is the focus of this paper. For intervals in our experiments with different fetch and wind conditions, their distributions are all skewed and weighted on small intervals. Results of Kolmogorov-Smirnov tests on time series of these intervals indicate that they all follow gamma distribution, and some are even exponential type. Average breaking-group-interval decreases with friction velocity and significant steepness until the wind is strong enough;most of them are more than 10 times the dominant wave period. Group breaking probability proposed by Babanin recently and the average number of breaking waves in wave groups are also discussed, and they are seemingly more reasonable and sensitive than traditional breaking probability defined in terms of single wave.展开更多
A numerical wave tank is used to investigate the onset and strength of unforced wave breaking, and the waves have three types of initial spectra： constant amplitude spectrum, constant steepness spectrum and Pierson-M...A numerical wave tank is used to investigate the onset and strength of unforced wave breaking, and the waves have three types of initial spectra： constant amplitude spectrum, constant steepness spectrum and Pierson-Moscowitz spectrum. Numerical tests are performed to validate the model results. Then, the onset of wave breaking is discussed with geometric, kinematic, and dynamic breaking criteria. The strength of wave breaking, which is always characterized by the fractional energy loss and breaking strength coefficient, is studied for different spectra. The results show how the energy growth rate is better than the initial wave steepness on estimating the fractional energy losses as well as breaking strength coefficient.展开更多
More and more researches show that neither the critical downward acceleration nor the critical slope of water waves is a universal constant. On the contrary, they vary with particular wave conditions. This fact render...More and more researches show that neither the critical downward acceleration nor the critical slope of water waves is a universal constant. On the contrary, they vary with particular wave conditions. This fact renders the models either for the probability of wave breaking B or for the whitecap coverage W based on these criteria difficult to apply. In this paper and the one which follows we seek to develop models for the prediction of both B and W based on the kinematical criterion. First, several joint probabilistic distribution functions (PDFs) of wave characteristics are derived, based on which the breaking properties B and W are estimated. The estimation is made on the assumption that a wave breaks if the horizontal velocity of water particles at its crest exceeds the local wave celerity, and whitecapping occurs in regions of fluid where water particles travel faster than the waves. The consequent B and W depend on wave spectral moments of orders 0 to 4. Then the JONSWAP spectrum is used to represent the fetch limited sea waves in deep water, so as to relate the probability of wave breaking and the whitecap coverage with wind parameters. To this end, the time averaging technique proposed by Glazman (1986) is applied to the estimation of the spectral moments involved, and furthermore, the theoretical models are compared with available observations collected from published literature. From the comparison, the averaging time scale is determined. The final models show that the probability of wave breaking as well as the whitecap coverage depends on the dimensionless fetch. The agreement between these models and the database is reasonable.展开更多
In this paper, the fact is revealed that the surface elevation of the third order Stokes waves in implicit form could have no solution or have simultaneously a trivial one and a singular one on certain conditions. Bas...In this paper, the fact is revealed that the surface elevation of the third order Stokes waves in implicit form could have no solution or have simultaneously a trivial one and a singular one on certain conditions. Based on this fact, the relative breaking width, a more reasonable quantity in agreement with the definition of whitecapping coverage rate, is obtained directly from the assumption that no solution means breaking. The implications of the singular solution existing in the third order stokes waves are also discussed briefly.展开更多
An idealized numerical wave flume has been established by finite element method on the bases of Navier Stokes equations through prescribing the appropriate boundary conditions for the open boundary,incident boundary,...An idealized numerical wave flume has been established by finite element method on the bases of Navier Stokes equations through prescribing the appropriate boundary conditions for the open boundary,incident boundary,free surface and solid boundary in this paper.The characteristics of waves propagating over a step have been investigated by this numerical model.The breaker wave height is determined depending on the kinetic criterion.The numerical model is verified by laboratory experiments,and the empirical formula for the damping of wave height due to breaking is also given by experiments.展开更多
[Objective] This study aimed to understand the characters of hard seeds of Amphicarpaea edgeworthii Benth. （Leguminosae） and explore the methods for break- ing dormancy. [Method] For both aerial and subterranean see...[Objective] This study aimed to understand the characters of hard seeds of Amphicarpaea edgeworthii Benth. （Leguminosae） and explore the methods for break- ing dormancy. [Method] For both aerial and subterranean seeds of A. edgeworthii, the morphological characteristics were observed and the appropriate temperature for germination was explored. For aerial seeds of A. edgeworthii, the characters of hard seeds were studied, and concentrated sulfuric acid treatment, hot water soak treat- ment and mechanical damage treatment were compared to explore the methods for breaking seed dormancy. [Result] The aerial seeds were oblate and averaged 3.38 mm in length, 3.02 mm in width, 1.88 mm in thickness, 15.32 g in thousand grain weight, with a hard seed rate after of up to 98% natural maturation. The subter- ranean seeds were approximately oblate with a maximum diameter of 15 mm and a hundred grain weight of （50.08-58.26 g）; among all the treatments for breaking hardseededness, cutting seed coat treatment and concentrated sulfuric acid treatment for 20 minutes were the most effective methods, whereas hot water soak treatment was the least effective method; constant temperature between 20 and 30 ℃ was optimum for the germination of aerial seeds, and alternative temperature of 30/20 ℃ was most appropriate for the germination of subterranean seeds. [Conclusion] Cutting seed coat treatment and concentrated sulfuric acid treatment for 20 minutes were the most effective methods to break the hardseededness of A. edgeworthii.展开更多
A quasi three-dimensional numerical model of wave-driven coastal currents with the effects of surface rollers is developed for the study of the spatial lag between the location of the maximum wave-induced current and ...A quasi three-dimensional numerical model of wave-driven coastal currents with the effects of surface rollers is developed for the study of the spatial lag between the location of the maximum wave-induced current and the wave breaking point. The governing equations are derived from Navier-Stokes equations and solved by the hybrid method combining the fractional step finite different method in the horizontal plane with a Galerkin finite element method in the vertical direc- tion. The surface rollers effects are considered through incorporating the creation and evolution of the roller area into the free surface shear stress. An energy equation facilitates the computation process which transfers the wave breaking energy dissipation to the surface roller energy. The wave driver model is a phase-averaged wave model based on the wave action balance equation. Two sets of laboratory experiments producing breaking waves that generated longshore currents on a planar beach am used to evaluate the model＇s performance. The present wave-driven coastal current model with the roller effect in the surface shear stress term can produce satisfactory results by increasing the wave-induced nearshore current velocity inside the surf zone and shifting the location of the maximum longshore current velocity landward.展开更多
The dynamic response behaviors of upright breakwaters under broken wave impact are analysed based on the mass-damper-spring dynamic system model. The effects of the mass, damping, stiffness, natural period, and impuls...The dynamic response behaviors of upright breakwaters under broken wave impact are analysed based on the mass-damper-spring dynamic system model. The effects of the mass, damping, stiffness, natural period, and impulse duration (or oscillation period) on the translation, rotation, sliding force, overturning moment, and corresponding dynamic amplifying factors are studied. It is concluded that the ampli-ying factors only depend on the ratio of the system natural period to impulse duration (or oscillation period) under a certain damping ratio. Moreover, the equivalent static approach to breakwater design is also discussed.展开更多
Based on the effective medium approximation theory of composites, the whitecap-covered sea surface is treated as a medium layer of dense seawater droplets and air. Two electromagnetic scattering models of randomly rou...Based on the effective medium approximation theory of composites, the whitecap-covered sea surface is treated as a medium layer of dense seawater droplets and air. Two electromagnetic scattering models of randomly rough surface are applied to the investigation of microwave backscattering of breaking waves driven by strong wind. The shapes of seawater droplets are considered by calculating the effective dielectric constant of the whitecap layer. The responses of seawater droplets shapes, such as sphere and ellipsoid, to the backscattering coefficient are discussed. Numerical results of the models are in good agreement with the experimental measurements of horizontally and vertically polarized backscattering at microwave frequency 13.9GHz and different incidence angles.展开更多
基金supported by the Program for National Defense Science and Technology Foundation Strengtheningthe Youth Foundation of Rocket Force University of Engineering(Grant No.2021QN-B014)。
文摘A submerged cavitation water jet(SCWJ)is an effective method to recycle solid propellant from obsolete solid engines by the breaking method.Solid propellant's breaking modes and mechanical process under SCWJ impact are unclear.This study aims to understand those impact breaking mechanisms.The hydroxyl-terminated polybutadiene(HTPB)propellant was chosen as the research material,and a self-designed test system was used to conduct impact tests at four different working pressures.The high-speed camera characterized crack propagation,and the DIC method calculated strain change during the impact process.Besides,micro and macro fracture morphologies were characterized by scanning electron microscope(SEM)and computed tomography(CT)scanning.The results reveal that the compressive strain concentration region locates right below the nozzle,and the shear strain region distributes symmetrically with the jet axis,which increases to 4% at first 16th ms,the compressive strain rises to 2% and 6% in the axial and transverse direction,respectively.The two tensile cracks formed first at the compression strain concentrate region,and there generate many shear cracks around the tensile cracks,and those shear cracks that develop and aggregate cause the cracks to become wider and cut through the tensile cracks,forming the tensile-shear cracks and the impact parts eventually fail.The HTPB propellant forms a breaking hole shaped conical after impact 10 s.The mass loss increases by 17 times at maximum,with the working pressure increasing by three times.Meanwhile,the damage value of the breaking hole remaining on the surface increases by 7.8 times while 2.9 times in the depth of the breaking hole.The breaking efficiency is closely affected by working pressures.The failure modes of HTPB impacted by SCWJ are classified as tensile crack-dominated and tensile-shear crack-dominated damage mechanisms.
基金supported by the National Key Research and Development Program of China(Grant No.2019YFA0308500)the National Natural Science Foundation of China(Grant Nos.62488201,52072401,11888101,12234016,and 12174317)+4 种基金the Chinese Academy of Sciences(Grant No.YSBR-003)the Innovation Program of Quantum Science and Technology(Grant No.2021ZD0302700)the New Cornerstone Science Foundationthe China Postdoctoral Science Foundation(Grant No.2022M723111)the Fellowship of China National Postdoctoral Program for Innovative Talents(Grant No.BX20230358)。
文摘Topologically nontrivial Fe-based superconductors attract extensive attentions due to their ability of hosting Majorana zero modes(MZMs)which could be used for topological quantum computation.Topological defects such as vortex lines are required to generate MZMs.Here,we observe the robust edge states along the surface steps of CaKFe_(4)As_(4).Remarkably,the tunneling spectra show a sharp zero-bias peak(ZBP)with multiple integerquantized states at the step edge under zero magnetic field.We propose that the increasing hole doping around step edges may drive the local superconductivity into a state with possible spontaneous time-reversal symmetry breaking.Consequently,the ZBP can be interpreted as an MZM in an effective vortex in the superconducting topological surface state by proximity to the center of a tri-junction with different superconducting order parameters.Our results provide new insights into the interplay between topology and unconventional superconductivity,and pave a new path to generate MZMs without magnetic field.
文摘China’s Olympic delegation at the Paris 2024,with 404 athletes competing in 232 events across 30 sports,clinched 40 gold,27 silver,and 24 bronze medals,marking their best performance at an Olympics held abroad.The success of these athletes across various disciplines demonstrates the country’s efforts to expand its athletic prowess while also marks a new chapter for Chinese sportsmanship on the international stage.
文摘Smartex,a trailblazing leader in textile industry innovation,was proud to announce its return to ITM 2024,showcasing unparalleled advancements in quality control and production efficiency.Building on the success of previous exhibitions at ITM 2022 and ITMA Milan 2023,Smartex emerges stronger than ever,presenting its complete Smartex System tailored to transform textile manufacturing.
基金the Natural Science Foundation of China (52172048, 52103221, 51873172, 22205130, 12175298)the Shandon Provincial Natural Science Foundation of China (ZR2021QB024, ZR2021QB179, ZR2021ZD06)+2 种基金the Guangdong Natural Science Foundation of China (2023A1515012323, 2023A1515010943, 2022A1515110643)the National Key Research and Development Program of China (2022YFB4200400) funded by MOST of Chinathe Fundamental Research Funds of Shandong University from China。
文摘Organic solar cells(OSCs) especially non-fullerene OSCs(NF-OSCs) are promising to become the next-generation of commercial applications and have received great attention from many researchers due to their typical advantages of low cost,light weight,and flexibility [1,2].
基金supported by the State Key Laboratory Open Fund(No.HKLBEF202004)the Natural Science Foundation of Jiangsu Province(No.BK20201313)+2 种基金the Key Program of National Natural Science Foundation of China(No.51934007)the Major Scientific and Technological Innovation Program in Shandong Province(No.2019JZZY020505)the National Key Research and Development Program of China(No.2022YFC3004700)。
文摘When the traditional drill and blast method is applied to rock crushing projects,it has strong vibration,loud noise and dust pollution,so it cannot be used in densely populated areas such as urban public works.We developed a supercritical CO_(2)true triaxial pneumatic rock-breaking experimental system,and conducted laboratory and field tests of dry ice powder pneumatic rock-breaking.The characteristics of the blast-induced vibration velocity waveform and the evolution of the vibration velocity and frequency with the focal distance were analyzed and discussed.The fracturing mechanism of dry ice powder pneumatic rock breaking is studied.The research results show that:(1)The vibration velocity induced by dry ice powder pneumatic rock breaking decays as a power function with the increase of the focal distance;(2)The vibration frequency caused by dry ice powder pneumatic rock breaking is mainly distributed in 1–120 Hz.Due to the dispersion effect,the dominant frequency of 10–30 Hz appears abnormally attenuated;(3)The traditional CO_(2)phase change fracturing energy calculation formula is also applicable to dry ice pneumatic rock breaking technology,and the trinitrotoluene(TNT)equivalent of fracturing energy is applicable to the Sadovsky formula;(4)Dry ice powder pneumatic rock breaking is shock wave and highenergy gas acting together to fracture rock,which can be divided into three stages,among which the gas wedge action of high-energy gas plays a dominant role in rock mass damage.
基金Supported by National Natural Science Foundation of China(Grant Nos.51608521,51809264)Beijing Municipal Major Achievements Transformation and Industrialization Projects of Central Universities(Grant No.ZDZH20141141301)the Fundamental Research Funds for the Central Universities(Grant No.2023ZKPYLJ06).
文摘The operation of a shield tunnel boring machine(TBM)in a high-strength hard rock stratum results in significant cutter damage,adversely affecting the thrust and torque of the cutter head.Therefore,it is very important to carry out the research on the stress characteristics and optimize the cutter parameters of cutters break high-strength hard rock.In this paper,the rock-breaking performance of cutters in an andesite stratum in the tunnel of Qingdao Metro Line No.8 was investigated using the discrete element method and theoretical analysis.The rock-breaking processes of a disc cutter and wedge tooth cutter were simulated by software particle flow code PFC^(3D),and the rock-breaking degree,stress of the cutter,and rock-breaking specific energy were analyzed.The rock damage caused by the cutter in a specific section was divided into three stages:the advanced influence,crushing,and stabilizing stages.The rock-breaking degree and the tangential and normal forces of the wedge tooth cutter are larger than that of the disc cutter under the same conditions.The disc cutter(wedge tooth cutter)has the highest rock-breaking efficiency at a cutter spacing of 100 mm(110 mm)and a penetration depth of 8 mm(10 mm),and the rock-breaking specific energy is 11.48 MJ/m^(3)(12.05 MJ/m^(3)).Therefore,two types of cutters with different penetration depths or cutter spacing should be considered.The number of teeth of wedge tooth cutters can be increased in hard strata to improve the rock-breaking efficiency of the shield.The research results provide a reference for shield cutterhead selection and cutter layout in similar projects.
基金financially supported by the National Natural Science Foundation of China (Nos. 52175245 and 52274093)the Natural Science Foundation of Hubei Province (No. 2021CFB462)。
文摘To improve the rock breaking ability, cavitating waterjet and abrasive waterjet are combined by using a coaxial low-speed waterjet generated around the periphery of a high-speed abrasive waterjet, and a new type of waterjet called unsubmerged cavitating abrasive waterjet(UCAWJ) is thus produced. The rock breaking performance of UCAWJ was compared with submerged cavitating abrasive waterjet(SCAWJ)and unsubmerged abrasive waterjet(UAWJ) by impinging sandstone specimens. Moreover, the effects of jet pressure, standoff distance, abrasive flow rate and concentration were studied by evaluating the specific energy consumption, and the area, depth, and mass loss of the eroded specimen. The results show that the artificially generated submerged environment in UCAWJ is able to enhance the rock breaking performance under the same operating parameters. Furthermore, the rock breaking performance of UCAWJ is much better at higher jet pressures and smaller standoff distances when compared with UAWJ. The greatest rock breaking ability of UCAWJ appears at jet pressure of 50 MPa and standoff distance of 32 mm, with the mass loss of sandstone increased by 370.6% and the energy dissipation decreased by 75.8%. In addition, under the experimental conditions the optimal abrasive flow rate and concentration are 76.5 m L/min and 3%, respectively.
文摘The sixth China International Import Expo(CIIE),the world’s first national-level import-themed expo,saw a total of 78.41 billion U.S.dollars’worth of tentative deals reached for one-year purchases of goods and services,setting a record high.
基金Project(51979156)supported by the National Natural Science Foundation of ChinaProject(tsqn202103087)supported by the Young Taishan Scholars,ChinaProject(2019KJG015)supported by the Youth Innovation Technology Project of Higher School in Shandong Province,China。
文摘This study investigates the factors affecting the rock-breaking efficiency of the TBM disc cutter in deep rock excavation,including confining pressure,penetration,cutter spacing,and revolution speed.The finite element method is employed to formulate a rock-breaking model of the rotary disc cutters and a numerical simulation is also implemented.The rock breaking effect,rock breaking volume,and rock breaking specific energy consumption under different combinations of the factors are investigated.An orthogonal test of four factors at four levels was constructed.Based on the test results and range analysis in the process of deep rock mass breaking,the order of sensitivity of each influencing factor with respect to the rock breaking specific energy for the disc cutter is cutter spacing>revolution speed>penetration>confining pressure.By constructing a numerical simulation comparison scheme,the orthogonal test results are analyzed and corroborated,and the rock breaking law and rock breaking efficiency under different influencing factors are derived.Finally,the sensitivity of different influencing factors on the rock-breaking efficiency is verified.
基金supported by the National Natural Science Foundation of China(Grant Nos.40830959 and 41276010)
文摘Knowledge on intermittency of wave breaking is so far limited to a few summary statistics, while the probability distribution of time interval between breaking events can provide a full view of intermittency. Based on a series of experiments on wind wave breaking, such probability distributions are investigated. Breaking waves within a wave group were taken as a single breaking event according to recent studies. Interval between successive wave groups with breaker is the focus of this paper. For intervals in our experiments with different fetch and wind conditions, their distributions are all skewed and weighted on small intervals. Results of Kolmogorov-Smirnov tests on time series of these intervals indicate that they all follow gamma distribution, and some are even exponential type. Average breaking-group-interval decreases with friction velocity and significant steepness until the wind is strong enough;most of them are more than 10 times the dominant wave period. Group breaking probability proposed by Babanin recently and the average number of breaking waves in wave groups are also discussed, and they are seemingly more reasonable and sensitive than traditional breaking probability defined in terms of single wave.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.41106019 and 41176016)the Public Science and Technology Research Funds Projects of Ocean(Grant No.201105018)the Scientific Research Fund of the Second Institute of Oceanography,SOA(Grant No.JT1205)
文摘A numerical wave tank is used to investigate the onset and strength of unforced wave breaking, and the waves have three types of initial spectra： constant amplitude spectrum, constant steepness spectrum and Pierson-Moscowitz spectrum. Numerical tests are performed to validate the model results. Then, the onset of wave breaking is discussed with geometric, kinematic, and dynamic breaking criteria. The strength of wave breaking, which is always characterized by the fractional energy loss and breaking strength coefficient, is studied for different spectra. The results show how the energy growth rate is better than the initial wave steepness on estimating the fractional energy losses as well as breaking strength coefficient.
文摘More and more researches show that neither the critical downward acceleration nor the critical slope of water waves is a universal constant. On the contrary, they vary with particular wave conditions. This fact renders the models either for the probability of wave breaking B or for the whitecap coverage W based on these criteria difficult to apply. In this paper and the one which follows we seek to develop models for the prediction of both B and W based on the kinematical criterion. First, several joint probabilistic distribution functions (PDFs) of wave characteristics are derived, based on which the breaking properties B and W are estimated. The estimation is made on the assumption that a wave breaks if the horizontal velocity of water particles at its crest exceeds the local wave celerity, and whitecapping occurs in regions of fluid where water particles travel faster than the waves. The consequent B and W depend on wave spectral moments of orders 0 to 4. Then the JONSWAP spectrum is used to represent the fetch limited sea waves in deep water, so as to relate the probability of wave breaking and the whitecap coverage with wind parameters. To this end, the time averaging technique proposed by Glazman (1986) is applied to the estimation of the spectral moments involved, and furthermore, the theoretical models are compared with available observations collected from published literature. From the comparison, the averaging time scale is determined. The final models show that the probability of wave breaking as well as the whitecap coverage depends on the dimensionless fetch. The agreement between these models and the database is reasonable.
文摘In this paper, the fact is revealed that the surface elevation of the third order Stokes waves in implicit form could have no solution or have simultaneously a trivial one and a singular one on certain conditions. Based on this fact, the relative breaking width, a more reasonable quantity in agreement with the definition of whitecapping coverage rate, is obtained directly from the assumption that no solution means breaking. The implications of the singular solution existing in the third order stokes waves are also discussed briefly.
文摘An idealized numerical wave flume has been established by finite element method on the bases of Navier Stokes equations through prescribing the appropriate boundary conditions for the open boundary,incident boundary,free surface and solid boundary in this paper.The characteristics of waves propagating over a step have been investigated by this numerical model.The breaker wave height is determined depending on the kinetic criterion.The numerical model is verified by laboratory experiments,and the empirical formula for the damping of wave height due to breaking is also given by experiments.
基金Supported by the"Twelfth Five-Year"Key Project for Crop Breeding of Sichuan Province(YZGG4-6)the Special Support Program for the Scientific Research Personnel of Sichuan Agricultural University~~
文摘[Objective] This study aimed to understand the characters of hard seeds of Amphicarpaea edgeworthii Benth. （Leguminosae） and explore the methods for break- ing dormancy. [Method] For both aerial and subterranean seeds of A. edgeworthii, the morphological characteristics were observed and the appropriate temperature for germination was explored. For aerial seeds of A. edgeworthii, the characters of hard seeds were studied, and concentrated sulfuric acid treatment, hot water soak treat- ment and mechanical damage treatment were compared to explore the methods for breaking seed dormancy. [Result] The aerial seeds were oblate and averaged 3.38 mm in length, 3.02 mm in width, 1.88 mm in thickness, 15.32 g in thousand grain weight, with a hard seed rate after of up to 98% natural maturation. The subter- ranean seeds were approximately oblate with a maximum diameter of 15 mm and a hundred grain weight of （50.08-58.26 g）; among all the treatments for breaking hardseededness, cutting seed coat treatment and concentrated sulfuric acid treatment for 20 minutes were the most effective methods, whereas hot water soak treatment was the least effective method; constant temperature between 20 and 30 ℃ was optimum for the germination of aerial seeds, and alternative temperature of 30/20 ℃ was most appropriate for the germination of subterranean seeds. [Conclusion] Cutting seed coat treatment and concentrated sulfuric acid treatment for 20 minutes were the most effective methods to break the hardseededness of A. edgeworthii.
基金supported by the National Natural Science Foundation of China(Grant No.50509007)the Program for New Century Excellent Talents in University of China(Grant No.NCET-07-0255)
文摘A quasi three-dimensional numerical model of wave-driven coastal currents with the effects of surface rollers is developed for the study of the spatial lag between the location of the maximum wave-induced current and the wave breaking point. The governing equations are derived from Navier-Stokes equations and solved by the hybrid method combining the fractional step finite different method in the horizontal plane with a Galerkin finite element method in the vertical direc- tion. The surface rollers effects are considered through incorporating the creation and evolution of the roller area into the free surface shear stress. An energy equation facilitates the computation process which transfers the wave breaking energy dissipation to the surface roller energy. The wave driver model is a phase-averaged wave model based on the wave action balance equation. Two sets of laboratory experiments producing breaking waves that generated longshore currents on a planar beach am used to evaluate the model＇s performance. The present wave-driven coastal current model with the roller effect in the surface shear stress term can produce satisfactory results by increasing the wave-induced nearshore current velocity inside the surf zone and shifting the location of the maximum longshore current velocity landward.
文摘The dynamic response behaviors of upright breakwaters under broken wave impact are analysed based on the mass-damper-spring dynamic system model. The effects of the mass, damping, stiffness, natural period, and impulse duration (or oscillation period) on the translation, rotation, sliding force, overturning moment, and corresponding dynamic amplifying factors are studied. It is concluded that the ampli-ying factors only depend on the ratio of the system natural period to impulse duration (or oscillation period) under a certain damping ratio. Moreover, the equivalent static approach to breakwater design is also discussed.
基金Project supported by the National Natural Science Foundation of China （Grant Nos 40476062 and 10374026）.
文摘Based on the effective medium approximation theory of composites, the whitecap-covered sea surface is treated as a medium layer of dense seawater droplets and air. Two electromagnetic scattering models of randomly rough surface are applied to the investigation of microwave backscattering of breaking waves driven by strong wind. The shapes of seawater droplets are considered by calculating the effective dielectric constant of the whitecap layer. The responses of seawater droplets shapes, such as sphere and ellipsoid, to the backscattering coefficient are discussed. Numerical results of the models are in good agreement with the experimental measurements of horizontally and vertically polarized backscattering at microwave frequency 13.9GHz and different incidence angles.
