期刊文献+
共找到14篇文章
< 1 >
每页显示 20 50 100
硅藻土/Bi_(2)MoO_(6)/g-C_(3)N_(4)复合材料的制备及其降解四环素的研究
1
作者 余峰 李斯琪 +2 位作者 袁家乐 钟韻童 郭文显 《化学研究与应用》 CAS 北大核心 2024年第6期1236-1244,共9页
采用新颖的热缩聚法制备得到石墨相氮化碳(g-C_(3)N_(4)),通过表面修饰钼酸铋、硅藻土进行改性得到硅藻土/Bi_(2)MoO_(6)/g-C_(3)N_(4)复合光催化材料。借助SEM(扫描电子显微镜),EDS(能谱仪),XRD(X射线衍射仪),FTIR(傅里叶变换红外光谱... 采用新颖的热缩聚法制备得到石墨相氮化碳(g-C_(3)N_(4)),通过表面修饰钼酸铋、硅藻土进行改性得到硅藻土/Bi_(2)MoO_(6)/g-C_(3)N_(4)复合光催化材料。借助SEM(扫描电子显微镜),EDS(能谱仪),XRD(X射线衍射仪),FTIR(傅里叶变换红外光谱仪),UVV1SDRS(紫外可见漫反射光谱仪),PL(光致发光光谱仪),比表面积及孔径测试仪和电化学工作站等多种仪器对复合材料进行表征,并研究了其降解废水中的盐酸四环素(TC)的光催化性能。结果表明,硅藻土/Bi_(2)MoO_(6)/g-C_(3)N_(4)复合材料表现了良好吸附光催化协同作用和优异的稳定性。在可见光照射下反应120 min对TC的降解率最高达到了95.3%,比二元复合材料Bi_(2)MoO_(6)/g-C_(3)N_(4)的89.1%及纯g-C_(3)N_(4)的66.3%均有较大提升。本研究为吸附光催化协同处理水中抗生素类提供了新思路。 展开更多
关键词 bi_(2)moo_(6)/g-c_(3)n_(4) g-c_(3)n_(4)复合材料 硅藻土 光催化 盐酸四环素
下载PDF
Bi_(2)WO_(6)/g-C_(3)N_(4)复合光催化剂的制备及其光催化性能研究 被引量:1
2
作者 韩碧波 刘世凯 +3 位作者 宋志健 王嘉琳 吴昊承 闫国晋 《现代化工》 CAS CSCD 北大核心 2024年第4期175-179,共5页
以尿素、硝酸铋、钨酸钠等为主要原料,在热缩聚法制备g-C_(3)N_(4)的基础上,通过水热法制备Bi_(2)WO_(6)/g-C_(3)N_(4)复合光催化剂。在模拟太阳光照射下,研究Bi_(2)WO_(6)/g-C_(3)N_(4)复合光催化剂对甲基橙的光催化降解性能。结果表明... 以尿素、硝酸铋、钨酸钠等为主要原料,在热缩聚法制备g-C_(3)N_(4)的基础上,通过水热法制备Bi_(2)WO_(6)/g-C_(3)N_(4)复合光催化剂。在模拟太阳光照射下,研究Bi_(2)WO_(6)/g-C_(3)N_(4)复合光催化剂对甲基橙的光催化降解性能。结果表明,复合光催化剂相比于单体光催化剂的性能有显著提高。在Bi_(2)WO_(6)与g-C_(3)N_(4)质量比为2∶1、水热温度为180℃、水热时间为12 h条件下,复合光催化剂的性能最好。光照时间210 min时,甲基橙降解率达到了98.15%,相比于单体Bi_(2)WO_(6)和g-C_(3)N_(4)光催化剂的效率分别提高了25.1%和37.7%,且光催化降解过程符合一级动力学方程。复合光催化剂具有优异的稳定性,经过4次重复性实验,甲基橙降解率仍达到95.17%。 展开更多
关键词 g-c_(3)n_(4) bi_(2)WO_(6) 水热法 光催化 甲基橙
原文传递
g-C_(3)N_(4)/Pd/Bi_(2)WO_(6)光催化剂协同降解苯扎贝特机理研究 被引量:2
3
作者 尹泽 高博熠 +1 位作者 刘愿强 高爱舫 《中国环境科学》 EI CAS CSCD 北大核心 2024年第5期2504-2513,共10页
利用贵金属Pd的等离子体共振效应和形貌可控Bi2WO6的光催化协同作用,通过低温水热法设计合成具有高效可见光活性的花状g-C_(3)N_(4)/Pd/Bi_(2)WO_(6)异质结复合催化剂.在可见光照射下,异质结复合催化剂光催化降解BZF的去除率均高于g-C_(... 利用贵金属Pd的等离子体共振效应和形貌可控Bi2WO6的光催化协同作用,通过低温水热法设计合成具有高效可见光活性的花状g-C_(3)N_(4)/Pd/Bi_(2)WO_(6)异质结复合催化剂.在可见光照射下,异质结复合催化剂光催化降解BZF的去除率均高于g-C_(3)N_(4),g-C_(3)N_(4)/Bi_(2)WO_(6),Pd/g-C_(3)N_(4)和Bi_(2)WO_(6),其中,50%g-C_(3)N_(4)/Pd/Bi_(2)WO_(6)对BZF的去除率为96%,是Pd/g-C_(3)N_(4)的1.8倍,g-C_(3)N_(4)和Bi_(2)WO_(6)的2.7倍.基于表征分析可知,g-C_(3)N_(4)/Pd/Bi_(2)WO_(6)复合催化剂中Bi_(2)WO_(6)呈现中心辐射花状纳米结构,并与层状Pd/g-C_(3)N_(4)连接;贵金属Pd可作为电子传输的介质,促进g-C_(3)N_(4)和Bi_(2)WO_(6)Z型异质结构的形成,有利于协同提升可见光催化活性.淬灭实验和EPR表征证实了·OH是g-C_(3)N_(4)/Pd/Bi_(2)WO_(6)催化降解BZF的主要活性物质,LC-MS/MS分结果表明羟基化作用取代贝特链是BZF降解的主要路径. 展开更多
关键词 苯扎贝特 PD g-c_(3)n_(4) bi_(2)WO_(6) 异质结
下载PDF
g-C_(3)N_(4)@Bi_(2)WO_(6)的制备及其光催化性能研究
4
作者 杨水金 张晓燕 熊刘燕 《徐州工程学院学报(自然科学版)》 CAS 2024年第2期26-32,共7页
将g-C_(3)N_(4)和Bi_(2)WO_(6)制备复合材料g-C_(3)N_(4)@Bi_(2)WO_(6),通过SEM、XRD以及PL等技术对g-C_(3)N_(4)@Bi_(2)WO_(6)进行了结构和光学性质的表征,并以罗丹明B(RhB)为目标染料,考察了不同负载量的催化性能差异,推测其光催化机... 将g-C_(3)N_(4)和Bi_(2)WO_(6)制备复合材料g-C_(3)N_(4)@Bi_(2)WO_(6),通过SEM、XRD以及PL等技术对g-C_(3)N_(4)@Bi_(2)WO_(6)进行了结构和光学性质的表征,并以罗丹明B(RhB)为目标染料,考察了不同负载量的催化性能差异,推测其光催化机理.实验证明复合材料稳定性很好,并且催化性能相对于纯的g-C_(3)N_(4)和Bi_(2)WO_(6)有了很大的提高.这项工作为高活性异质结构光催化剂的设计和合成提供了思路. 展开更多
关键词 g-c_(3)n_(4) bi_(2)WO_(6) 复合材料 光催化机理
下载PDF
Variable valence Mo^(5+)/Mo^(6+)ionic bridge in hollow spherical g-C_(3)N_(4)/Bi_(2)MoO_(6) catalysts for promoting selective visible light-driven CO_(2)photoreduction into CO 被引量:3
5
作者 Wenjie He Yuechang Wei +8 位作者 Jing Xiong Zhiling Tang Yingli Wang Xiong Wang Hui Xu Xiao Zhang Xiaolin Yu Zhen Zhao Jian Liu 《Journal of Energy Chemistry》 SCIE EI CAS CSCD 2023年第5期361-372,I0009,共13页
Herein,the catalysts of ultrathin g-C_(3)N_(4)surface-modified hollow spherical Bi2MoO6(g-C_(3)N_(4)/Bi2MoO6,abbreviated as CN/BMO)were fabricated by the co-solvothermal method.The variable valence Mo^(5+)/Mo^(6+)ioni... Herein,the catalysts of ultrathin g-C_(3)N_(4)surface-modified hollow spherical Bi2MoO6(g-C_(3)N_(4)/Bi2MoO6,abbreviated as CN/BMO)were fabricated by the co-solvothermal method.The variable valence Mo^(5+)/Mo^(6+)ionic bridge in CN/BMO catalysts can boost the rapid transfer of photogenerated electrons from Bi2MoO6to g-C_(3)N_(4).And the synergy effect of g-C_(3)N_(4)and Bi2MoO6components remarkably enhance CO_(2)adsorption capability.CN/BMO-2 catalyst has the best performances for visible light-driven CO_(2)reduction compared with single Bi2MoO6and g-C_(3)N_(4),i.e.,its amount and selectivity of CO product are 139.50μmol g-1and 96.88%for 9 h,respectively.Based on the results of characterizations and density functional theory calculation,the photocatalytic mechanism for CO_(2)reduction is proposed.The high-efficient separation efficiency of photogenerated electron-hole pairs,induced by variable valence Mo^(5+)/Mo^(6+)ionic bridge,can boost the rate-limiting steps(COOH*-to-CO*and CO*desorption)of selective visible light-driven CO_(2)conversion into CO.It inspires the establishment of efficient photocatalysts for CO_(2)conversion. 展开更多
关键词 g-c_(3)n_(4) bi_(2)moo_(6) Mo^(5+)/Mo^(6+)ionic bridge CO_(2)photoconversion CO production
下载PDF
BiVO_(4)/Bi_(2)MoO_(6)/g-C_(3)N_(4)复合光催化材料的制备及性能 被引量:6
6
作者 姚文瑾 董锋 +3 位作者 胡春艳 朱智甲 郑剑 刘保江 《印染》 CAS 北大核心 2022年第4期1-5,共5页
采用水热法制备BiVO_(4)/Bi_(2)MoO_(6)/g-C_(3)N_(4)复合光催化材料。当BiVO_(4)与Bi_(2)MoO_(6)物质的量比为10∶1,g-C_(3)N_(4)对BiVO_(4)的掺杂量为1.0%,pH为3,反应温度为160℃,反应时间为6 h时,制备的BiVO_(4)/Bi_(2)MoO_(6)/g-C_(... 采用水热法制备BiVO_(4)/Bi_(2)MoO_(6)/g-C_(3)N_(4)复合光催化材料。当BiVO_(4)与Bi_(2)MoO_(6)物质的量比为10∶1,g-C_(3)N_(4)对BiVO_(4)的掺杂量为1.0%,pH为3,反应温度为160℃,反应时间为6 h时,制备的BiVO_(4)/Bi_(2)MoO_(6)/g-C_(3)N_(4)复合光催化材料具有最佳的光催化活性。其对活性艳蓝KN-R染液的光催化脱色率在120 min内可达到87%以上。 展开更多
关键词 光催化材料 水热法 bivo_(4)/bi_(2)moo_(6)/g-c_(3)n_(4) 活性染料
下载PDF
花簇状g-C_(3)N_(4)/Bi_(2)MoO_(6)微球的制备及其光催化降解模拟染料废水 被引量:9
7
作者 杨莉 李润泽 +3 位作者 张黎 姜晓雪 王瑞雪 田彬灿 《精细化工》 EI CAS CSCD 北大核心 2021年第5期1030-1037,共8页
以酵母为生物模板,通过水热-牺牲模板法制备了花簇状g-C_(3)N_(4)/Bi_(2)MoO_(6)微球。利用XRD、SEM、TEM、FTIR、UV-VisDRS、光电流响应以及氮气吸附-脱附等手段对样品的晶体结构、微观形貌、光吸收和比表面积等性能进行了表征,并对样... 以酵母为生物模板,通过水热-牺牲模板法制备了花簇状g-C_(3)N_(4)/Bi_(2)MoO_(6)微球。利用XRD、SEM、TEM、FTIR、UV-VisDRS、光电流响应以及氮气吸附-脱附等手段对样品的晶体结构、微观形貌、光吸收和比表面积等性能进行了表征,并对样品可见光催化降解亚甲基蓝(MB)模拟染料废水的性能和机理进行了探讨。结果表明,水热-牺牲模板法可实现g-C_(3)N_(4)与Bi_(2)MoO_(6)在生物模板表面的成功复合,样品分散性良好,微球直径约为8μm,表面呈花簇状,比表面积达11.6007 m^(2)/g。可见光下g-C_(3)N_(4)负载量为10%的g-C_(3)N_(4)/Bi_(2)MoO_(6)(以Bi_(2)MoO_(6)的质量计,记为10CN/BM)微球对MB模拟染料废水表现出较高的光催化降解活性,当10CN/BM添加量为1 g/L、可见光照射140min后,初始质量浓度为15mg/L的MB废水的降解率高达96%以上。机理分析证实,微球表面g-C_(3)N_(4)与Bi_(2)MoO_(6)形成的Z型异质结有效降低了电子-空穴对的复合率,显著提升了对模拟染料废水的可见光催化性能。 展开更多
关键词 生物模板法 g-c_(3)n_(4) bi_(2)moo_(6) 微球 光催化 水处理技术
原文传递
g-C_(3)N_(4)/Bi_(2)MoO_(6)/Ag_(3)PO_(4)复合材料制备及其可见光催化性能 被引量:3
8
作者 赵西连 卜鑫焱 +3 位作者 范辉 许胜华 樊宇顺 陈丛瑾 《精细化工》 EI CAS CSCD 北大核心 2022年第3期533-540,共8页
以三聚氰胺、二水合钼酸钠和五水合硝酸铋为原料,采用溶剂热法制备了g-C_(3)N_(4)/Bi_(2)MoO_(6)前驱体,然后通过共沉淀法将Ag_(3)PO_(4)纳米粒子负载在前驱体上,得到g-C_(3)N_(4)/Bi_(2)MoO_(6)/Ag_(3)PO_(4)复合材料。以盐酸四环素(TC... 以三聚氰胺、二水合钼酸钠和五水合硝酸铋为原料,采用溶剂热法制备了g-C_(3)N_(4)/Bi_(2)MoO_(6)前驱体,然后通过共沉淀法将Ag_(3)PO_(4)纳米粒子负载在前驱体上,得到g-C_(3)N_(4)/Bi_(2)MoO_(6)/Ag_(3)PO_(4)复合材料。以盐酸四环素(TC)为目标降解物,分析复合材料光催化活性。通过XRD、FTIR、XPS、SEM、UV-Vis DRS对复合材料进行了表征。结果表明,g-C_(3)N_(4)、Bi_(2)MoO_(6)和Ag_(3)PO_(4)之间形成了异质结结构,促进光生电子-空穴对的有效分离。在可见光照射下,30 mg g-C_(3)N_(4)/Bi_(2)MoO_(6)/Ag_(3)PO_(4)复合材料在50 min内对40 mL质量浓度10 mg/L的TC溶液的降解率达到93%。降解速率常数为0.046 min^(-1),分别为g-C_(3)N_(4)、Bi_(2)MoO_(6)和Ag_(3)PO_(4)的25.6、3.9和1.5倍。复合材料对TC进行降解循环利用4次后,对TC的降解率为71%,说明复合材料具有较好的稳定性。自由基捕获实验结果表明,g-C_(3)N_(4)/Bi_(2)MoO_(6)/Ag_(3)PO_(4)复合材料光催化降解TC的主要活性物种为·OH和·O_(2)^(-)。 展开更多
关键词 光催化 盐酸四环素 降解 复合材料 g-c_(3)n_(4)/bi_(2)moo_(6)/Ag_(3)PO_(4) 功能材料
原文传递
g-C_(3)N_(4)/Bi_(2)MoO_(6)复合光催化剂的制备及性能研究 被引量:3
9
作者 褚佳欢 汤嘉成 +1 位作者 朱媛 张进 《无机盐工业》 CAS CSCD 北大核心 2022年第11期131-136,共6页
结合热缩聚法和水热法制备了g-C_(3)N_(4)/Bi_(2)MoO_(6)复合光催化剂,利用X射线衍射(XRD)、傅里叶红外光谱(FT-IR)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、氮气吸附-脱附曲线、紫外-可见漫反射光谱(UV-Vis DRS)、光致发光光谱(PL... 结合热缩聚法和水热法制备了g-C_(3)N_(4)/Bi_(2)MoO_(6)复合光催化剂,利用X射线衍射(XRD)、傅里叶红外光谱(FT-IR)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、氮气吸附-脱附曲线、紫外-可见漫反射光谱(UV-Vis DRS)、光致发光光谱(PL)等分析测试技术对材料的结构和性能进行了表征,研究了材料光催化降解罗丹明B(RhB)的效果。结果表明,与纯Bi_(2)MoO_(6)相比,g-C_(3)N_(4)/Bi_(2)MoO_(6)复合材料提高了对可见光的吸收能力,减小了带隙宽度,在可见光激发下提高了降解RhB的光催化活性。其中,5%g-C_(3)N_(4)/Bi_(2)MoO_(6)复合材料对RhB的降解率最高,在可见光照射180 min对RhB的降解率为93%;而同样条件下Bi_(2)MoO_(6)对RhB的降解率为58%。重复性实验表明,复合材料在RhB光降解过程中是稳定的,具有较好的应用潜力。 展开更多
关键词 g-c_(3)n_(4) 钼酸铋 光催化 罗丹明B
下载PDF
Ternary Ni_(2)P/Bi_(2)MoO_(6)/g-C_(3)N_(4)composite with Z-scheme electron transfer path for enhanced removal broad-spectrum antibiotics by the synergistic effect of adsorption and photocatalysis 被引量:2
10
作者 Feng Guo Zhihao Chen +4 位作者 Xiliu Huang Longwen Cao Xiaofang Cheng Weilong Shi Lizhuang Chen 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2022年第4期157-168,共12页
Constructing the stable,low-cost,efficient,and highly adaptable visible light-driven photocatalyst to implement the synergistic effect of photocatalysis and adsorption has been excavated a promising strategy to deal w... Constructing the stable,low-cost,efficient,and highly adaptable visible light-driven photocatalyst to implement the synergistic effect of photocatalysis and adsorption has been excavated a promising strategy to deal with antibiotic pollution in water bodies.Herein,a novel 3 D ternary Z-scheme heterojunction photocatalyst Ni_(2)P/Bi_(2)MoO_(6)/g-C_(3)N_(4)(Ni_(2)P/BMO/CN)was fabricated by a simple solvothermal method in which the broad spectrum antibiotics(mainly tetracyclines and supplemented by quinolones)were used as target pollution sources to evaluate its adsorption and photocatalytic performance.Notably,the Zscheme composite significantly exhibit the enhancement for degradation efficiency of tetracycline and other antibiotic by using Ni_(2)P nanoparticles as electron conductor.Active species capture experiment and electron spin resonance(ESR)technology reveal the mechanism of Z-scheme Ni_(2)P/BMO/CN photocatalytic reaction in detail.In addition,based on the identification of intermediates by liquid chromatography–mass spectroscopy(LC–MS),the possible photocatalytic degradation pathways of TC were proposed. 展开更多
关键词 ni_(2)P/bi_(2)moo_(6)/g-c_(3)n_(4) Z-scheme PHOTOCATALYSIS ADSORPTIOn
下载PDF
Z型g-C_(3)N_(4)/Bi_(2)WO_(6)吸附-光催化降解左氧氟沙星:动力学、机制与降解路径
11
作者 陈国壮 查雨心 +3 位作者 郭雅婧 赵宝秀 李金成 马丙瑞 《环境科学学报》 CAS CSCD 北大核心 2023年第8期24-36,共13页
通过水热法制备了g-C_(3)N_(4)掺杂量为13%的g-C_(3)N_(4)/Bi_(2)WO_(6)复合光催化剂,并使用SEM、XRD、XPS、BET、UV-Vis DRS和电化学工作站等对其形貌、结构和光电化学性能进行表征.分析结果表明,g-C_(3)N_(4)均匀负载于Bi_(2)WO_(6)表... 通过水热法制备了g-C_(3)N_(4)掺杂量为13%的g-C_(3)N_(4)/Bi_(2)WO_(6)复合光催化剂,并使用SEM、XRD、XPS、BET、UV-Vis DRS和电化学工作站等对其形貌、结构和光电化学性能进行表征.分析结果表明,g-C_(3)N_(4)均匀负载于Bi_(2)WO_(6)表面,形成了稳定的异质结结构.相比于g-C_(3)N_(4)和Bi_(2)WO_(6),g-C_(3)N_(4)/Bi_(2)WO_(6)具有更大的比表面积,在40 min的暗反应阶段对水中左氧氟沙星(LEV)的吸附效率为43.7%.g-C_(3)N_(4)/Bi_(2)WO_(6)对LEV的吸附行为符合准二级动力学模型,其初始吸附阶段颗粒内扩散是限速步骤.g-C_(3)N_(4)/Bi_(2)WO_(6)在120 min的可见光反应阶段对LEV的去除效率为85.8%,其光催化降解过程符合准一级动力学模型.g-C_(3)N_(4)/Bi_(2)WO_(6)吸附-光催化降解LEV性能增强的原因主要是增大的比表面积以及Z型异质结的形成拓展了催化剂的光谱响应范围,提高了光生电子-空穴的分离效率.h+和·O_(2)^(-)在g-C_(3)N_(4)/Bi_(2)WO_(6)光催化降解LEV过程中发挥主要作用,且经过光催化降解后LEV的急性毒性和致突变性均有所下降. 展开更多
关键词 水热法 g-c_(3)n_(4)/bi_(2)WO_(6) 左氧氟沙星(LEV) 吸附-光催化降解 Z型异质结
原文传递
Construction of dual Z-scheme Bi2WO6/g-C_(3)N_(4)/black phosphorus quantum dots composites for effective bisphenol A degradation 被引量:1
12
作者 Fuyou Du Zhan Lai +2 位作者 Huiyang Tang Haiyan Wang Chenxi Zhao 《Journal of Environmental Sciences》 SCIE EI CAS CSCD 2023年第2期617-629,共13页
In this work,a novel dual Z-scheme Bi_(2)WO_(6)/g-C_(3)N_(4)/black phosphorus quantum dots(Bi_(2)WO_(6)/g-C_(3)N_(4)/BPQDs)composites were fabricated and utilized towards photocatalytic degradation of bisphenol A(BPA)... In this work,a novel dual Z-scheme Bi_(2)WO_(6)/g-C_(3)N_(4)/black phosphorus quantum dots(Bi_(2)WO_(6)/g-C_(3)N_(4)/BPQDs)composites were fabricated and utilized towards photocatalytic degradation of bisphenol A(BPA)under visible-light irradiation.Optimizing the content of g-C_(3)N_(4) and BPQDs in Bi_(2)WO_(6)/g-C_(3)N_(4)/BPQDs composites to a suitable mass ratio can enhance the visible-light harvesting capacity and increase the charge separation efficiency and the transfer rate of excited-state electrons and holes,resulting in much higher photocatalytic activity for BPA degradation(95.6%,at 20 mg/L in 120 min)than that of Bi2WO6(63.7%),g-C_(3)N_(4)(25.0%),BPQDs(8.5%),and Bi_(2)WO_(6)/g-C_(3)N_(4)(79.6%),respectively.Radical trapping experiments indicated that photogenerated holes(h+)and superoxide radicals(•O_(2)−)played crucial roles in photocatalytic BPA degradation.Further,the possible degradation pathway and photocatalytic mechanism was proposed by analyzing the BPA intermediates.Thiswork also demonstrated that the Bi2WO6/g-C_(3)N_(4)/BPQDs as effective photocatalystswas stable and have promising potential to remove environmental contaminants from real water samples. 展开更多
关键词 Dual Z-scheme bi_(2)WO_(6) Graphitic carbon nitride(g-c_(3)n_(4)) Black phosphorus quantum dots (BPQDs) bisphenol A(BPA)
原文传递
2D/2D Bi_(2)MoO_(6)/g-C_(3)N_(4) S-scheme heterojunction photocatalyst with enhanced visible-light activity by Au loading 被引量:9
13
作者 Qiaoqiao Li Wenli Zhao +4 位作者 Zicheng Zhai Kaixu Ren Tingyu Wang Hao Guan Haifeng Shi 《Journal of Materials Science & Technology》 SCIE EI CAS CSCD 2020年第21期216-226,共11页
A novel 2D/2D Bi_(2)MoO_(6)/g-C_(3)N_(4) step-scheme(S-scheme)composite by loading Au as cocatalyst was successfully fabricated using a photoreduction and hydrothermal route.The obtained Bi_(2)MoO_(6)/g-C_(3)N_(4)/Au ... A novel 2D/2D Bi_(2)MoO_(6)/g-C_(3)N_(4) step-scheme(S-scheme)composite by loading Au as cocatalyst was successfully fabricated using a photoreduction and hydrothermal route.The obtained Bi_(2)MoO_(6)/g-C_(3)N_(4)/Au photocatalysts were characterized by X-ray diffraction(XRD),transmission electron microscope(TEM),X-ray photo-electron spectroscopy(XPS),UV–vis diffuse reflectance spectra(UV–vis),Fourier transform infrared spectroscopy(FTIR),photoluminescence(PL),photocurrent response(I-t),and electrochemical impedance spectroscopy(EIS).The HRTEM images revealed that an intimate interface in composites were formed.The optimum photocatalytic activity of Rhodamine B degradation over Bi_(2)MoO_(6)/g-C_(3)N_(4)/Au was about 9.7 times and 13.1 times as high as those of Bi_(2)MoO_(6) and g-C_(3)N_(4),respectively.The notably improved photocatalytic activity of Bi_(2)MoO_(6)/g-C_(3)N_(4)/Au could be mainly ascribed to the abundant active sites and the enhanced separation efficiency of photogenerated carriers in Bi_(2)MoO_(6)/g-C_(3)N_(4) S-scheme system.Notably,Au nanoparticles could act as a co-catalyst to further promote electron transfer and separation from the conduction band of g-C_(3)N_(4).Additionally,a possible step-scheme photocatalytic reaction mechanism of Rh B degradation over Bi_(2)MoO_(6)/g-C_(3)N_(4)/Au was tentatively proposed.PL and transient photocurrent analysis implied that Bi_(2)MoO_(6)/g-C_(3)N_(4)/Au photocatalysts possessed the lower recombination rate of photogenerated carriers compared with pure Bi_(2) MoO_(6) and g-C_(3)N_(4),respectively.The present work is expected to provide useful information in designing 2D/2D S-scheme heterojunction photocatalysts. 展开更多
关键词 g-c_(3)n_(4) bi_(2)moo_(6) 2D/2D S-scheme Au loading
原文传递
Recent advances in bismuth-based multimetal oxide photocatalysts for hydrogen production from water splitting:Competitiveness,challenges,and future perspectives 被引量:2
14
作者 Zheng Zhu Shipeng Wan +7 位作者 Yunxia Zhao Yaxin Gu Yaobin Wang Yong Qin Zhihui Zhang Xinlei Ge Qin Zhong Yunfei Bu 《Materials Reports(Energy)》 2021年第2期22-34,共13页
The efficient utilization of photocatalytic technology is essential for clean energy.Bismuth-based multimetal oxides(Bi_(2)WO_(6),Bi_(2)MoO_(6),BiVO_(4)and Bi_(4)Ti_(3)O_(12))have aroused widespread attention as a vis... The efficient utilization of photocatalytic technology is essential for clean energy.Bismuth-based multimetal oxides(Bi_(2)WO_(6),Bi_(2)MoO_(6),BiVO_(4)and Bi_(4)Ti_(3)O_(12))have aroused widespread attention as a visible light responsive photocatalyst for hydrogen evolution due to their low cost,nontoxicity,modifiable morphology,and outstanding optical and chemical properties.Nevertheless,the photocatalytic activities of pure materials are unsatisfactory because of their relative small specific surface area,poor quantum yield,and the rapid recombination of photogenerated carriers.Therefore,some modification strategies,including morphological control,semiconductor combination,doping,and defect engineering,have been systematically studied to enhance photocatalytic H_(2)evolution activity in the past few years.Herein,we summarize the recent research progress on bismuth-based photocatalysts,pointing out the prospects,opportunities and challenges of bismuth-based photocatalysts.Eventually,we aims to put forward valuable suggestions for designing of bismuth-based photocatalysts applied in hydrogen production on the premise of consolidating the existing theoretical basis of photocatalysis. 展开更多
关键词 bi_(2)WO_(6) bi_(2)moo_(6) bivo_(4) bi_(4)Ti_(3)O_(12) Morphological control Semiconductor combination HETEROJUnCTIOn Doping Defect Hydrogen production
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部