A novel photo-catalytic system composed of N-doped biochars(NBCs),MnFe_(2)O_(4) and sulfite activation under ultraviolet(NBCs/MnFe_(2)O_(4)/sulfite/UV)was constructed to realize the efficient eliminate of tetracycline...A novel photo-catalytic system composed of N-doped biochars(NBCs),MnFe_(2)O_(4) and sulfite activation under ultraviolet(NBCs/MnFe_(2)O_(4)/sulfite/UV)was constructed to realize the efficient eliminate of tetracycline(TC).As the carrier of MnFe_(2)O_(4),NBCs were synthesized from alfalfa,which has large specific surface area,graphite like structure and hierarchical porous structure.The adsorption isotherm indicated that NBCs/MnFe_(2)O_(4)-2:1 had the best adsorption performance for TC(347.56 mg g^(-1)).Through synergistic adsorption and photocatalysis,the removal rate of TC reached 84%,which was significantly higher than that of MnFe_(2)O_(4).Electrochemical impedance spectroscopy(EIS)and Photoluminescence(PL)characterization results showed that the introduction of NBCs improved the separation efficiency of photogenerated electron and hole pairs and enhanced the photocatalytic performance.Moreover,the adsorption,degradation mechanism and degradation path of TC by the catalyst were systematically analyzed by coupling HPLC–MS measurement with the theoretical calculation.Considering the advantages of excellent degradation performance,low cost,easy separation and environmental friendliness of NBCs/MnFe_(2)O_(4),this work was expected to provide a new path for the practical application of biochar.展开更多
Dredged marine soils(DMS)have poor engineering properties,which limit their usage in construction projects.This research examines the application of reactive magnesia(rMgO)containing supplementary cementitious materia...Dredged marine soils(DMS)have poor engineering properties,which limit their usage in construction projects.This research examines the application of reactive magnesia(rMgO)containing supplementary cementitious materials(SCMs)to stabilize DMS under ambient and carbon dioxide(CO_(2))curing conditions.Several proprietary experimental tests were conducted to investigate the stabilized DMS.Furthermore,the carbonation-induced mineralogical,thermal,and microstructural properties change of the samples were explored.The findings show that the compressive strength of the stabilized DMS fulfilled the 7-d requirement(0.7-2.1 MPa)for pavement and building foundations.Replacing rMgO with SCMs such as biochar or ground granulated blast-furnace slag(GGBS)altered the engineering properties and particle packing of the stabilized soils,thus influencing their performances.Biochar increased the porosity of the samples,facilitating higher CO_(2) uptake and improved ductility,while GGBS decreased porosity and increased the dry density of the samples,resulting in higher strength.The addition of SCMs also enhanced the water retention capacity and modified the pH of the samples.Microstructural analysis revealed that the hydrated magnesium carbonates precipitated in the carbonated samples provided better cementation effects than brucite formed during rMgO hydration.Moreover,incorporating SCMs reduced the overall global warming potential and energy demand of the rMgO-based systems.The biochar mixes demonstrated lower toxicity and energy consumption.Ultimately,the rMgO and biochar blend can serve as an environmentally friendly additive for soft soil stabilization and permanent fixation of significant amounts of CO_(2) in soils through mineral carbonation,potentially reducing environmental pollution while meeting urbanization needs.展开更多
Biochar is a carbon sink material with the potential to improve water retention in various soils.However,for the long‐term maintenance of green infrastructure,there is an additional need to regulate the water content...Biochar is a carbon sink material with the potential to improve water retention in various soils.However,for the long‐term maintenance of green infrastructure,there is an additional need to regulate the water contents in the covers to maintain vegetation growth in semiarid conditions.In this study,biochar‐amended soil was combined with subsurface drip irrigation,and the water preservation characteristics of this treatment were investigated through a series of one‐dimensional soil column tests.To ascertain the best treatment method specific to semiarid climatic conditions,the test soil was amended with 0%,1%,3%,and 5%biochar.Automatic irrigation devices equipped with soil moisture sensors were used to control the subsurface water content with the aim of enhancing vegetation growth.Each soil column test lasted 150 h,during which the volumetric water contents and soil suction data were recorded.The experimental results reveal that the soil specimen amended with 3%biochar is the most water‐saving regardless of the time cost.Soil with a higher biochar content(e.g.,5%)consumes a more significant amount of water due to the enhancement of the water‐holding capacity.Based on the experimental results,it can be concluded that the appropriate ratio can be determined within 1%–3%,which can reduce not only the amount of irrigated/used water but also the time cost.Such technology can be explored for water content regulation in green infrastructure and the development of barriers for protecting the environment around deep underground waste containment.展开更多
Biochar is widely used to improve soil physical properties and carbon sequestration. However, few studies focuse on the impact of maize stalk biochar on labile organic carbon(LOC) pool and the relationship between phy...Biochar is widely used to improve soil physical properties and carbon sequestration. However, few studies focuse on the impact of maize stalk biochar on labile organic carbon(LOC) pool and the relationship between physical properties and LOC fractions. A field positioning experiment was performed in Mollisols region of Northeast China to evaluate the influence of maize stalk biochar on the spatial distribution and temporal changes of physical properties and LOC fractions. Maize stalk biochar treatments included C1(1.5 kg·hm^(-2)), C2(3 kg·hm^(-2)), C3(15 kg·hm^(-2)), C4(30 kg·hm^(-2)), and CK(0). The results showed that maize stalk biochar increased soil water contents(SWC) and soil porosity(SP), but reduced bulk density(BD). Maize stalk biochar reduced dissolved organic carbon(DOC) contents in the 0-20 cm soil layer, ranging from 0.25 g·kg^(-1) to 0.31 g·kg^(-1) in harvest period, while increased in the 20-40 cm soil layer. In addition, the application of biochar had a significant impact on the spatial distribution and temporal change of SWC, BD, SP, DOC, hot-water extractable carbon(HWC), acid hydrolyzed organic carbon(AHC Ⅰ, Ⅱ), and readily oxidized organic carbon(ROC). High amounts of maize stalk biochar up-regulated the contents of soil organic carbon SOC, HWC, AHC Ⅰ, AHC Ⅱ, and ROC. In addition, SWC and SP were the key physical factors to affect LOC fractions. In conclusions, maize stalk biochar could improve physical properties, and then influence LOC fractions, and maize stalk biochar could be used as an organic amendment for restoring degraded soils governed by their rates of addition.展开更多
An in-vitro experiment was conducted to assess the interaction between biochar and algae on a problem soil. Experiments were performed with and without algae to observe the effectiveness of algae for overcoming the ch...An in-vitro experiment was conducted to assess the interaction between biochar and algae on a problem soil. Experiments were performed with and without algae to observe the effectiveness of algae for overcoming the challenges posed by problem soils. At the end of incubation periods, the adsorption and desorption of phosphorus (P) on a problem soil vis-á-vis algal inoculation were determined. Our results showed that different types of biochars adsorbed different amounts of P suggesting that the source of biochar played a crucial role in determining its behavior towards P. Tannery waste biochar significantly adsorbed 147% and 35% more P compared to that of the chicken litter and orange peel biochars respectively. Significant reductions in adsorption were observed when the biochar was used in combination with the algae which could be due to the beneficial effects of algae leading to the amelioration of the problem soil. Adsorption was reduced to 34%, 24% and 20% for the orange peel biochar + algae, chicken litter biochar + algae and tannery waste biochar + algae, respectively compared to the corresponding biochars present as a single solid. Phosphorus (P) desorption was also reduced significantly in presence of algal inoculation. Overall our findings suggest that the application of algae along with biochar in the problem soil could reduce the adsorption of P which would influence the availability of P.展开更多
In this paper, biochar (BC) was used as raw material, activated by deionizing aqueous solution, NaCl solution, CA solution and HCl solution respectively. Epichlorohydrin (EPI) was used as crosslinking agent, and β-cy...In this paper, biochar (BC) was used as raw material, activated by deionizing aqueous solution, NaCl solution, CA solution and HCl solution respectively. Epichlorohydrin (EPI) was used as crosslinking agent, and β-cyclodextrin (β-CD) was used to modify biochar (BC). The prepared modified biochar materials were labeled with β-CDBC, β-CDBC-Na, β-CDBC-CA and β-CDBC-H, respectively. The infrared spectrum, X-ray diffractometer, scanning electron microscope and specific surface area of the four modified materials were tested. The results showed that the C-O stretching vibration peak at 1020 cm<sup>−</sup><sup>1</sup> of the modified materials was slightly offset compared with that of biochar. The characteristic absorption peaks of XRD pattern decrease obviously at 2θ = 26.7˚ and 29.5˚. It can be obviously observed on the electron microscope image that the surface is loaded or formed clathrates, and BET data and graphs also show that the specific surface area of the modified biochar is larger. Therefore, β-cyclodextrin successfully modified biochar and formed clathrates on the surface of biochar or was loaded in the pore structure of biochar, especially β-CDBC-CA achieved better modification effect. Because biochar and β-cyclodextrin raw materials are cheap, easy to prepare and green, and less prone to secondary pollution, it has a good advantage in environmental governance.展开更多
Two major problems facing agriculture at present are soil pollution and the disposal of solid wastes generated during plant growth. The method of preparing biochar from solid wastes produced by plants is a means of ma...Two major problems facing agriculture at present are soil pollution and the disposal of solid wastes generated during plant growth. The method of preparing biochar from solid wastes produced by plants is a means of maximizing the use of resources to combat the problem of soil pollution. In this study, we did not choose straw in the traditional sense but the waste branches from grape pruning, which has higher lignin cellulose, as the raw material. The biochar derived from grape branches pyrolyzed at 300˚C for two hours was utilized as a raw material to prepare modified biochar with varying concentrations of phosphoric acid. The adsorption performance and mechanism of Cd<sup>2 </sup> were explored through experiments involving different concentrations, addition amounts, reaction times, kinetic analyses, and isothermal adsorption tests. The findings indicated that the optimal adsorption of Cd<sup>2 </sup> occurred with a 20% phosphoric acid concentration, achieving the highest adsorption rate of 84.62%. At a dosage of 10 g/L, the maximum adsorption capacity reached 7.02 mg/g. The adsorption kinetics and isothermal adsorption of Cd<sup>2 </sup> on biochar modified with 0.2% phosphoric acid (0.2 PB) closely followed the pseudo-first-order kinetics model (R<sup>2</sup> > 0.98) and the Freundlich model (R<sup>2</sup> > 0.97), respectively. This suggests that the adsorption process involves both physical and chemical mechanisms. SEM and FTIR analyses revealed that phosphoric acid modification primarily increased the biochar’s specific surface area and enhanced certain original functional groups. The adsorption process predominantly involved rapid ion diffusion and chemical adsorption, as confirmed by kinetic analysis and isothermal adsorption model analysis. In summary, the adsorption efficiency of 0.2 PB significantly improved, showing potential and feasibility for heavy metal remediation in soil. This supports the environmentally friendly concept of “treating waste with waste”.展开更多
Biochar is a well-known material for pollutant removal owing to its low cost and rich surface functionality. A kind of highly active substance, called environmentally persistent free radicals(EPFRs), can be produced i...Biochar is a well-known material for pollutant removal owing to its low cost and rich surface functionality. A kind of highly active substance, called environmentally persistent free radicals(EPFRs), can be produced in the preparation process of biochar, playing an important role in the removal of pollutants.In this study, sludge-derived biochars(SBC_(120) and SBC_(270)) were prepared by the hydrothermal carbonization under two temperatures(120℃ and 270℃) to investigate their removal abilities of Cr(Ⅵ). The maximum removal amounts of Cr(Ⅵ) by SBC_(120) and SBC_(270) were 16.58 and 22.93 mg·g^(-1), respectively. It was further revealed that the appearance of Cr(Ⅲ), as a result of EPFRs on sludge-derived biochar(SBC) transferred electrons to Cr(Ⅵ) in neutral solutions. That is to say, oxygen-centered(O-centered) EPFRs on SBC_(120) and carbon-centered(C-centered) EPFRs on SBC_(270) all could be used as electron donors to Cr(Ⅵ) to make it become Cr(Ⅲ). This study not only provides a theoretical basis for the mechanism of pollutants removal by sludge-derived biochar but also offers a new perspective on the direct effect of EPFRs on pollutants.展开更多
The conversion of agricultural residual biomass into biochar as a sulfur host material for Li-S batteries is a promising approach to alleviate the greenhouse effect and realize waste resource reutilization.However,the...The conversion of agricultural residual biomass into biochar as a sulfur host material for Li-S batteries is a promising approach to alleviate the greenhouse effect and realize waste resource reutilization.However,the large-scale application of pristine biochar is hindered by its low electrical conductivity and limited electrocatalytic sites.This paper addressed these challenges via the construction of Fe-N co-doped biochar(Fe-NOPC)through the copyrolysis of sesame seeds shell and ferric sodium ethylenediaminetetraacetic acid(NaFeEDTA).During the synthesis process,NaFeEDTA was used as an extra carbon resource to regulate the chemical environment of N doping,which resulted in the production of high contents of graphitic,pyridinic,and pyrrolic N and Fe-Nx bonds.When the resulting Fe-NOPC was used as a sulfur host,the pyridinic and pyrrolic N would adjust the surface electron structure of biochar to accelerate the electron/ion transport,and the electropositive graphitic N could be combined with sulfur-related species via electrostatic attraction.Fe-Nx could also promote the redox reaction of lithium polysulfides due to the strong Li-N and S-Fe bonds.Benefiting from these advantages,the resultant Fe-NOPC/S cathode with a sulfur loading of 3.8 mg·cm^(-2)delivered an areal capacity of 4.45 mAh·cm^(-2)at 0.1C and retained a capacity of 3.45 mAh·cm^(-2)at 1C.Thus,this cathode material holds enormous potential for achieving energy-dense Li-S batteries.展开更多
Coral sand is widely encountered in coastal areas of tropical and subtropical regions.Compared with silica sand,it usually exhibits weaker performance from the perspective of engineering geology.To improve the geomech...Coral sand is widely encountered in coastal areas of tropical and subtropical regions.Compared with silica sand,it usually exhibits weaker performance from the perspective of engineering geology.To improve the geomechanical performance of coral sand and meet the requirement of foundation construction in coastal areas,a novel alkali activation-based sustainable binder was developed.The alkaliactivated slag(AAS)binder material was composed of ground granulated blast-furnace slag(GGBS)and hydrated lime with the amendment of biochar,an agricultural waste-derived material.The biocharamended AAS stabilized coral sand was subjected to a series of laboratory tests to determine its mechanical,physicochemical,and microstructural characteristics.Results show that adding a moderate amount of biochar in AAS could improve soil strength,elastic modulus,and water holding capacity by up to 20%,70%,and 30%,respectively.Moreover,the addition of biochar in AAS had a marginal effect on the sulfate resistance of the stabilized sand,especially at high biochar content.However,the resistance of the AAS stabilized sand to wet-dry cycles slightly deteriorated with the addition of biochar.Based on these observations,a conceptual model showing biochar-AAS-sand interactions was proposed,in which biochar served as an internal curing agent,micro-reinforcer,and mechanically weak point.展开更多
Reconstituted wood panels have several advantages in terms of ease of manufacturing,but their shorter life span results in a huge amount of reconstituted wood panels being discarded in sorting centers yearly.Currently...Reconstituted wood panels have several advantages in terms of ease of manufacturing,but their shorter life span results in a huge amount of reconstituted wood panels being discarded in sorting centers yearly.Currently,the most common approach for dealing with this waste is incineration.In this study,reconstituted wood panels were converted into activated biochar through a two-step thermochemical process:(i)biochar production using pilot scale fast pyrolysis at 250 kg/h and 450℃;and(ii)a physical activation at three temperatures(750℃,850℃ and 950℃)using an in-house activation furnace(1 kg/h).Results showed that the first stage removed about 66% of the nitrogen from the wood panels in the form of NO,NH3,and trimethylamine,which were detected in small amounts compared to emitted CO_(2).Compared to other types of thermochemical conversion methods(e.g.,slow pyrolysis),isocyanic acid and hydrogen cyanide were not detected in this study.The second stage produced activated biochar with a specific surface area of up to 865 m^(2)/g at 950℃.The volatile gases generated during activation were predominantly composed of toluene and benzene.This two-step process resulted in nitrogen-rich carbon in the form of pyrrolic and pyridinic nitrogen.Activated biochars were then evaluated for their SO_(2) retention performance and showed an excellent adsorption capacity of up to 2140 mg/g compared to 65 mg/g for a commercial activated carbon(889 m^(2)/g).End-of-life reconstituted wood panels and SO_(2) gas are problematic issues in Canada where the economy largely revolves around forestry and mining industries.展开更多
Boreal forests commonly suff er from nitrogen defi ciency due to low rate of nitrogen mineralization.Biochar may promote soil organic matter decomposition and accelerate nitrogen mineralization.In this study,Illumina ...Boreal forests commonly suff er from nitrogen defi ciency due to low rate of nitrogen mineralization.Biochar may promote soil organic matter decomposition and accelerate nitrogen mineralization.In this study,Illumina NovaSeq sequencing combined with functional annotation of prokaryotic taxa(FAPROTAX)analysis was used to investigate the eff ect of biochar pyrolysis temperatures,the amount of applied biochar,and the period since the biochar application(2-and 3-year)on soil bacterial communities.The results show that biochar pyrolysis temperatures(500℃ and 650℃)and the amount of applied biochar(0.5 kg m^(−2)and 1.0 kg m^(−2))did not change soil properties.Nevertheless,the interaction of biochar pyrolysis temperature and the amount had signifi cant eff ects on bacterial species richness and evenness(P<0.05).The application of biochar produced at 500℃ had a lower abundance of Actinobacteria and Verrucomicrobia,while that produced at 650℃ had a higher abundance of Conexibacter and Phenylobacterium.When biochar produced at 650℃ was applied,applying 0.5 kg m^(−2)had a higher abundance of Cyanobacteria,Conexibacter,and Phenylobacterium than that of 1.0 kg m^(−2)(P<0.05).Functionally,the abundance of the aromatic compound degradation group increased with the extension of application time and increase of pyrolysis temperature.The time since application played an important role in the formation of soil bacterial communities and their functional structure.Long-term studies are necessary to understand the consequence of biochar on bacterial communities in boreal forests.展开更多
With the gradually increasing protection awareness about electromagnetic pollution,the demand for absorbing materials with renewability and environmental friendliness has attracted widespread attention.In this work,co...With the gradually increasing protection awareness about electromagnetic pollution,the demand for absorbing materials with renewability and environmental friendliness has attracted widespread attention.In this work,composites consisting of straw-derived biochar combined with NiCo alloy were successfully fabricated through high-temperature carbonization and subsequent hydrothermal reaction.The electromagnetic parameters of the porous biocarbon/NiCo composites can be effectively modified by altering their NiCo content,and their improved absorbing performance can be attributed to the synergy effect of magnetic-dielectric characteristics.An exceptional reflection loss of-27.0 dB at 2.2 mm thickness and an effective absorption bandwidth of 4.4 GHz(11.7-16.1 GHz)were achieved.These results revealed that the porous biocarbon/NiCo composites could be used as a new generation absorbing material because of their low density,light weight,excellent conductivity,and strong absorption.展开更多
Among challenges implicit in the transition to the post-fossil fuel energetic model,the finite amount of resources available for the technological implementation of CO_(2) revalorizing processes arises as a central is...Among challenges implicit in the transition to the post-fossil fuel energetic model,the finite amount of resources available for the technological implementation of CO_(2) revalorizing processes arises as a central issue.The development of fully renewable catalytic systems with easier metal recovery strategies would promote the viability and sustainability of synthetic natural gas production circular routes.Taking Ni and NiFe catalysts supported over g-Al_(2)O_(3) oxide as reference materials,this work evaluates the potentiality of Ni and NiFe supported biochar catalysts for CO_(2) methanation.The development of competitive biochar catalysts was found dependent on the creation of basic sites on the catalyst surface.Displaying lower Turn Over Frequencies than Ni/Al catalyst,the absence of basic sites achieved over Ni/C catalyst was related to the depleted catalyst performances.For NiFe catalysts,analogous Ni_(5)Fe_(1) alloys were constituted over both alumina and biochar supports.The highest specific activity of the catalyst series,exhibited by the NiFe/C catalyst,was related to the development of surface basic sites along with weaker NiFe-C interactions,which resulted in increased Ni0:NiO surface populations under reaction conditions.In summary,the present work establishes biochar supports as a competitive material to consider within the future low-carbon energetic panorama.展开更多
In the rice-wheat rotation system,biochar(BC)can be applied at the initiation of the rice or wheat season.Here,we compared the effects of BC that were applied at two different crop seasons on wheat production,quality,...In the rice-wheat rotation system,biochar(BC)can be applied at the initiation of the rice or wheat season.Here,we compared the effects of BC that were applied at two different crop seasons on wheat production,quality,and soil profile properties in a rice-wheat rotation system with nitrogen(N)fertilizer applied at 280 kg/ha rate.Results showed that both wheat grain production and N recovery use efficiency were influenced by BC applied at two crop seasons.Biochar application did not affect the total non-essential amino-acid,but when applied during wheat season,BC significantly(p<0.05)increased total essential amino acid in grain by 12.3%,particularly for the valine(+48.2%),methionine(+43.8%),and isoleucine(+10.3%).We found that BC significantly(p<0.05)decreased the pH of soil at 0–6 cm and 20–30 cm by 0.14–0.18 and 0.05–0.08 units,respectively.The NH4+-N content of the whole observed soil profile were reduced by BC application,however,the effect of BC on NO3–-N content varied with the application season and profile depth.Interestingly,BC applied at wheat and rice season significantly(p<0.05)improved topsoil N contents by 48.4%and 19.7%,respectively.In addition,data suggested that BC applied during wheat season performed better in enhancing soil available phosphorus,potassium,and organic matter contents.In conclusion,we suggest that the optimum application time of BC for enhancing crop production and quality(take amino-acid content for example)and improving soil fertility is at the initiation of the wheat season.展开更多
In this study,a novel absorpent(MSAR600℃)with a hydrophobic surface and hierarchical porous structure for the removal of kitchen oil was facilely fabricated from the macroalgae,laver(Porphyra haitanensis)by incorpor-...In this study,a novel absorpent(MSAR600℃)with a hydrophobic surface and hierarchical porous structure for the removal of kitchen oil was facilely fabricated from the macroalgae,laver(Porphyra haitanensis)by incorpor-ating high-temperature carbonization and alkyl polyglucosides(APG)and rhamnolipid(RL)surfactants modifi-cation.The characterization results showed MSAR600℃ possessed a louts-leaf-like papillae microstructure with high contact angle(137.5°),abundant porous structure with high specific surface area(23.4 m^(2)/g),and various oxygen-containing functional groups(-OH,C=O,C-O).Batch adsorption experiments were conducted to inves-tigate the effect of adsorption time,temperature,pH,and absorbent dose on kitchen oil adsorption performance.Then the practical application for the removal of kitchen oil using MSAR600℃ was also performed.The results showed that MSAR600℃ had a higher removal efficiency for kitchen oil(75.98%),compared with the commercial detergent(72.3%).This study demonstrates an example of fabricating a green tableware detergent for enhanced removal performance of kitchen oil.展开更多
A pot experiment was conducted to research the effect of biochar and wood vinegar on labile phosphorus fractions in saline-alkali soil.There were eight treatments,including CK(0 kg•hm-2 biochar+0 kg•hm-2 wood vinegar)...A pot experiment was conducted to research the effect of biochar and wood vinegar on labile phosphorus fractions in saline-alkali soil.There were eight treatments,including CK(0 kg•hm-2 biochar+0 kg•hm-2 wood vinegar),C1(0.6 t•hm-2 biochar),C2(0.6 t•hm-2 wood vinegar),C3(1.2 t•hm-2 wood vinegar),C4(1.8 t•hm-2 wood vinegar),C5(0.6 t•hm-2 biochar+0.6 t•hm-2 wood vinegar),C6(0.6 t•hm-2 biochar+1.2 t•hm-2 wood vinegar),and C7(0.6 t•hm-2 biochar+1.8 t•hm-2 wood vinegar).The results showed that biochar without wood vinegar and the co-application of biochar and wood vinegar significantly increased soil total phosphorus content.Meanwhile,compared with CK,all of treatments increased resin phosphorus and sodium bicarbonate-extracted inorganic phosphorus(NaHCO3-Pi)contents in saline-alkali soil.Especially,the contents of resin phosphorus and NaHCO3-Pi under C5,C6,and C7 treatments were higher than those of C2,C3,and C4 treatments,respectively,indicating that the increases of labile phosphorus contents under the co-application of biochar and wood vinegar were better than those of the alone application of biochar and wood vinegar.Each treatment increased the proportion of labile phosphorus pool in saline-alkali soil and the proportion of labile phosphorus pool increased with the increase of the amount of wood vinegar.In addition,the application of biochar and wood vinegar increased the 100-grain weight of rice,and C6 treatment had the best effect,increasing the 100-grain weight by 134.35%.Therefore,the application of biochar and wood vinegar in saline-alkali soil could improve the soil phosphorus availability,increase the weight of rice grains,thereby realizing the resource utilization of agricultural waste and the sustainable development of agriculture.展开更多
The chemical composition of biochar and the pyrolysis temperature, under which biochar was produced, determine its electrochemical properties. Electrical conductivity, pseudo-capacitance, and double layer capacitance ...The chemical composition of biochar and the pyrolysis temperature, under which biochar was produced, determine its electrochemical properties. Electrical conductivity, pseudo-capacitance, and double layer capacitance are the three main electrochemical properties of biochar. Due to the electrical conductivity biochar is able to interfere with the electrons flow and play a dual role of an electron donor or an electron acceptor. The average conductivity of biochar is 229.20 S/m. Pseudocapacitance of biochar lets it serve as a hydrogen sink, taking up the hydrogen produced by protozoa and preventing it from participating in methane-producing reactions in the rumen environment. The average value of biochar’s pseudocapacitance is 228 F·g<sup>-1</sup>. Positive and negative charges get stored due to the absorption of ions onto the carbon surface, which happens because of the existence of double layer capacitance as one of biochar’s electrochemical properties. Biochar’s double layer capacitance values can reach the point of 110.8 F·g<sup>-1</sup>. The electrochemical properties of biochar are directly co-dependent with its redox potential and pH. Electrical conductivity, pseudocapacitance, and double layer capacitance can significantly influence biochemical processes in the rumen and, thus, need to be studied practically.展开更多
[Objectives]To prepare biomanganese oxide/biochar composite(BMO-BC)and examine its remediation performance on arsenic contamination.[Methods]The BMO-BC was prepared by cultivating Pseudomonas putida MnB1 in the presen...[Objectives]To prepare biomanganese oxide/biochar composite(BMO-BC)and examine its remediation performance on arsenic contamination.[Methods]The BMO-BC was prepared by cultivating Pseudomonas putida MnB1 in the presence of Mn 2+and biochar.[Results]The initial concentration of Mn 2+in the culture system had no significant effect on the growth rate and domestication cycle of Pseudomonas putida MnB1.The results of SEM-EDS and XRD analysis confirm that the adsorbent prepared in this experiment was a composite of biomanganese oxide and biochar particles.The results of arsenic pollution removal test in simulated environment showed that the in-situ formed BMO-BC composite had certain removal effect on As(III)and the presence of biochar particles and manganese dioxide in the reaction system and the manganese oxidation ability of microbial strain MnB1 affect its remediation performance to As(III).[Conclusions]When the initial concentration is in the range of 0-10.0 mg/L,the isothermal adsorption data of BMO-BC on As(III)conforms to the Langmuir model.展开更多
基金gratefully acknowledge the financial support for this research from the National Natural Science Foundation of China(Grant No.:21978047,21776046)the Six Talent Climax Foundation of Jiangsu(Grant No.:XCL-079).
文摘A novel photo-catalytic system composed of N-doped biochars(NBCs),MnFe_(2)O_(4) and sulfite activation under ultraviolet(NBCs/MnFe_(2)O_(4)/sulfite/UV)was constructed to realize the efficient eliminate of tetracycline(TC).As the carrier of MnFe_(2)O_(4),NBCs were synthesized from alfalfa,which has large specific surface area,graphite like structure and hierarchical porous structure.The adsorption isotherm indicated that NBCs/MnFe_(2)O_(4)-2:1 had the best adsorption performance for TC(347.56 mg g^(-1)).Through synergistic adsorption and photocatalysis,the removal rate of TC reached 84%,which was significantly higher than that of MnFe_(2)O_(4).Electrochemical impedance spectroscopy(EIS)and Photoluminescence(PL)characterization results showed that the introduction of NBCs improved the separation efficiency of photogenerated electron and hole pairs and enhanced the photocatalytic performance.Moreover,the adsorption,degradation mechanism and degradation path of TC by the catalyst were systematically analyzed by coupling HPLC–MS measurement with the theoretical calculation.Considering the advantages of excellent degradation performance,low cost,easy separation and environmental friendliness of NBCs/MnFe_(2)O_(4),this work was expected to provide a new path for the practical application of biochar.
基金This work was supported by the Creative Groups of Natural Science Foundation of Hubei Province(Grant No.2021CFA030).Onyekwena Chikezie Chimere is an awardee for the ANSO Scholarship 2020-PhD.Ishrat Hameed Alvi is a recipient of the 2021 PhD ANSO Scholarship.
文摘Dredged marine soils(DMS)have poor engineering properties,which limit their usage in construction projects.This research examines the application of reactive magnesia(rMgO)containing supplementary cementitious materials(SCMs)to stabilize DMS under ambient and carbon dioxide(CO_(2))curing conditions.Several proprietary experimental tests were conducted to investigate the stabilized DMS.Furthermore,the carbonation-induced mineralogical,thermal,and microstructural properties change of the samples were explored.The findings show that the compressive strength of the stabilized DMS fulfilled the 7-d requirement(0.7-2.1 MPa)for pavement and building foundations.Replacing rMgO with SCMs such as biochar or ground granulated blast-furnace slag(GGBS)altered the engineering properties and particle packing of the stabilized soils,thus influencing their performances.Biochar increased the porosity of the samples,facilitating higher CO_(2) uptake and improved ductility,while GGBS decreased porosity and increased the dry density of the samples,resulting in higher strength.The addition of SCMs also enhanced the water retention capacity and modified the pH of the samples.Microstructural analysis revealed that the hydrated magnesium carbonates precipitated in the carbonated samples provided better cementation effects than brucite formed during rMgO hydration.Moreover,incorporating SCMs reduced the overall global warming potential and energy demand of the rMgO-based systems.The biochar mixes demonstrated lower toxicity and energy consumption.Ultimately,the rMgO and biochar blend can serve as an environmentally friendly additive for soft soil stabilization and permanent fixation of significant amounts of CO_(2) in soils through mineral carbonation,potentially reducing environmental pollution while meeting urbanization needs.
基金Foundation of China(Grant No.52261160382)for financial support.
文摘Biochar is a carbon sink material with the potential to improve water retention in various soils.However,for the long‐term maintenance of green infrastructure,there is an additional need to regulate the water contents in the covers to maintain vegetation growth in semiarid conditions.In this study,biochar‐amended soil was combined with subsurface drip irrigation,and the water preservation characteristics of this treatment were investigated through a series of one‐dimensional soil column tests.To ascertain the best treatment method specific to semiarid climatic conditions,the test soil was amended with 0%,1%,3%,and 5%biochar.Automatic irrigation devices equipped with soil moisture sensors were used to control the subsurface water content with the aim of enhancing vegetation growth.Each soil column test lasted 150 h,during which the volumetric water contents and soil suction data were recorded.The experimental results reveal that the soil specimen amended with 3%biochar is the most water‐saving regardless of the time cost.Soil with a higher biochar content(e.g.,5%)consumes a more significant amount of water due to the enhancement of the water‐holding capacity.Based on the experimental results,it can be concluded that the appropriate ratio can be determined within 1%–3%,which can reduce not only the amount of irrigated/used water but also the time cost.Such technology can be explored for water content regulation in green infrastructure and the development of barriers for protecting the environment around deep underground waste containment.
基金Supported by the National Natural Science Foundation of China Project(31770582)。
文摘Biochar is widely used to improve soil physical properties and carbon sequestration. However, few studies focuse on the impact of maize stalk biochar on labile organic carbon(LOC) pool and the relationship between physical properties and LOC fractions. A field positioning experiment was performed in Mollisols region of Northeast China to evaluate the influence of maize stalk biochar on the spatial distribution and temporal changes of physical properties and LOC fractions. Maize stalk biochar treatments included C1(1.5 kg·hm^(-2)), C2(3 kg·hm^(-2)), C3(15 kg·hm^(-2)), C4(30 kg·hm^(-2)), and CK(0). The results showed that maize stalk biochar increased soil water contents(SWC) and soil porosity(SP), but reduced bulk density(BD). Maize stalk biochar reduced dissolved organic carbon(DOC) contents in the 0-20 cm soil layer, ranging from 0.25 g·kg^(-1) to 0.31 g·kg^(-1) in harvest period, while increased in the 20-40 cm soil layer. In addition, the application of biochar had a significant impact on the spatial distribution and temporal change of SWC, BD, SP, DOC, hot-water extractable carbon(HWC), acid hydrolyzed organic carbon(AHC Ⅰ, Ⅱ), and readily oxidized organic carbon(ROC). High amounts of maize stalk biochar up-regulated the contents of soil organic carbon SOC, HWC, AHC Ⅰ, AHC Ⅱ, and ROC. In addition, SWC and SP were the key physical factors to affect LOC fractions. In conclusions, maize stalk biochar could improve physical properties, and then influence LOC fractions, and maize stalk biochar could be used as an organic amendment for restoring degraded soils governed by their rates of addition.
文摘An in-vitro experiment was conducted to assess the interaction between biochar and algae on a problem soil. Experiments were performed with and without algae to observe the effectiveness of algae for overcoming the challenges posed by problem soils. At the end of incubation periods, the adsorption and desorption of phosphorus (P) on a problem soil vis-á-vis algal inoculation were determined. Our results showed that different types of biochars adsorbed different amounts of P suggesting that the source of biochar played a crucial role in determining its behavior towards P. Tannery waste biochar significantly adsorbed 147% and 35% more P compared to that of the chicken litter and orange peel biochars respectively. Significant reductions in adsorption were observed when the biochar was used in combination with the algae which could be due to the beneficial effects of algae leading to the amelioration of the problem soil. Adsorption was reduced to 34%, 24% and 20% for the orange peel biochar + algae, chicken litter biochar + algae and tannery waste biochar + algae, respectively compared to the corresponding biochars present as a single solid. Phosphorus (P) desorption was also reduced significantly in presence of algal inoculation. Overall our findings suggest that the application of algae along with biochar in the problem soil could reduce the adsorption of P which would influence the availability of P.
文摘In this paper, biochar (BC) was used as raw material, activated by deionizing aqueous solution, NaCl solution, CA solution and HCl solution respectively. Epichlorohydrin (EPI) was used as crosslinking agent, and β-cyclodextrin (β-CD) was used to modify biochar (BC). The prepared modified biochar materials were labeled with β-CDBC, β-CDBC-Na, β-CDBC-CA and β-CDBC-H, respectively. The infrared spectrum, X-ray diffractometer, scanning electron microscope and specific surface area of the four modified materials were tested. The results showed that the C-O stretching vibration peak at 1020 cm<sup>−</sup><sup>1</sup> of the modified materials was slightly offset compared with that of biochar. The characteristic absorption peaks of XRD pattern decrease obviously at 2θ = 26.7˚ and 29.5˚. It can be obviously observed on the electron microscope image that the surface is loaded or formed clathrates, and BET data and graphs also show that the specific surface area of the modified biochar is larger. Therefore, β-cyclodextrin successfully modified biochar and formed clathrates on the surface of biochar or was loaded in the pore structure of biochar, especially β-CDBC-CA achieved better modification effect. Because biochar and β-cyclodextrin raw materials are cheap, easy to prepare and green, and less prone to secondary pollution, it has a good advantage in environmental governance.
文摘Two major problems facing agriculture at present are soil pollution and the disposal of solid wastes generated during plant growth. The method of preparing biochar from solid wastes produced by plants is a means of maximizing the use of resources to combat the problem of soil pollution. In this study, we did not choose straw in the traditional sense but the waste branches from grape pruning, which has higher lignin cellulose, as the raw material. The biochar derived from grape branches pyrolyzed at 300˚C for two hours was utilized as a raw material to prepare modified biochar with varying concentrations of phosphoric acid. The adsorption performance and mechanism of Cd<sup>2 </sup> were explored through experiments involving different concentrations, addition amounts, reaction times, kinetic analyses, and isothermal adsorption tests. The findings indicated that the optimal adsorption of Cd<sup>2 </sup> occurred with a 20% phosphoric acid concentration, achieving the highest adsorption rate of 84.62%. At a dosage of 10 g/L, the maximum adsorption capacity reached 7.02 mg/g. The adsorption kinetics and isothermal adsorption of Cd<sup>2 </sup> on biochar modified with 0.2% phosphoric acid (0.2 PB) closely followed the pseudo-first-order kinetics model (R<sup>2</sup> > 0.98) and the Freundlich model (R<sup>2</sup> > 0.97), respectively. This suggests that the adsorption process involves both physical and chemical mechanisms. SEM and FTIR analyses revealed that phosphoric acid modification primarily increased the biochar’s specific surface area and enhanced certain original functional groups. The adsorption process predominantly involved rapid ion diffusion and chemical adsorption, as confirmed by kinetic analysis and isothermal adsorption model analysis. In summary, the adsorption efficiency of 0.2 PB significantly improved, showing potential and feasibility for heavy metal remediation in soil. This supports the environmentally friendly concept of “treating waste with waste”.
基金supported by the Beijing Municipal Natural Science Foundation (8202007)the National Natural Science Foundation of China (52170148)。
文摘Biochar is a well-known material for pollutant removal owing to its low cost and rich surface functionality. A kind of highly active substance, called environmentally persistent free radicals(EPFRs), can be produced in the preparation process of biochar, playing an important role in the removal of pollutants.In this study, sludge-derived biochars(SBC_(120) and SBC_(270)) were prepared by the hydrothermal carbonization under two temperatures(120℃ and 270℃) to investigate their removal abilities of Cr(Ⅵ). The maximum removal amounts of Cr(Ⅵ) by SBC_(120) and SBC_(270) were 16.58 and 22.93 mg·g^(-1), respectively. It was further revealed that the appearance of Cr(Ⅲ), as a result of EPFRs on sludge-derived biochar(SBC) transferred electrons to Cr(Ⅵ) in neutral solutions. That is to say, oxygen-centered(O-centered) EPFRs on SBC_(120) and carbon-centered(C-centered) EPFRs on SBC_(270) all could be used as electron donors to Cr(Ⅵ) to make it become Cr(Ⅲ). This study not only provides a theoretical basis for the mechanism of pollutants removal by sludge-derived biochar but also offers a new perspective on the direct effect of EPFRs on pollutants.
基金supported by the National Natural Science Foundation of China(No.21808053)the Postgraduate Scientific Research Innovation Project of Hunan Province,China(No.CX20210659)。
文摘The conversion of agricultural residual biomass into biochar as a sulfur host material for Li-S batteries is a promising approach to alleviate the greenhouse effect and realize waste resource reutilization.However,the large-scale application of pristine biochar is hindered by its low electrical conductivity and limited electrocatalytic sites.This paper addressed these challenges via the construction of Fe-N co-doped biochar(Fe-NOPC)through the copyrolysis of sesame seeds shell and ferric sodium ethylenediaminetetraacetic acid(NaFeEDTA).During the synthesis process,NaFeEDTA was used as an extra carbon resource to regulate the chemical environment of N doping,which resulted in the production of high contents of graphitic,pyridinic,and pyrrolic N and Fe-Nx bonds.When the resulting Fe-NOPC was used as a sulfur host,the pyridinic and pyrrolic N would adjust the surface electron structure of biochar to accelerate the electron/ion transport,and the electropositive graphitic N could be combined with sulfur-related species via electrostatic attraction.Fe-Nx could also promote the redox reaction of lithium polysulfides due to the strong Li-N and S-Fe bonds.Benefiting from these advantages,the resultant Fe-NOPC/S cathode with a sulfur loading of 3.8 mg·cm^(-2)delivered an areal capacity of 4.45 mAh·cm^(-2)at 0.1C and retained a capacity of 3.45 mAh·cm^(-2)at 1C.Thus,this cathode material holds enormous potential for achieving energy-dense Li-S batteries.
基金supported by the Hawaii Department of Transportation(Grant No.2020-4ReSUPP)National Natural Science Foundation of China(Grant No.42007246)Fundamental Research Funds for the Central Universities.
文摘Coral sand is widely encountered in coastal areas of tropical and subtropical regions.Compared with silica sand,it usually exhibits weaker performance from the perspective of engineering geology.To improve the geomechanical performance of coral sand and meet the requirement of foundation construction in coastal areas,a novel alkali activation-based sustainable binder was developed.The alkaliactivated slag(AAS)binder material was composed of ground granulated blast-furnace slag(GGBS)and hydrated lime with the amendment of biochar,an agricultural waste-derived material.The biocharamended AAS stabilized coral sand was subjected to a series of laboratory tests to determine its mechanical,physicochemical,and microstructural characteristics.Results show that adding a moderate amount of biochar in AAS could improve soil strength,elastic modulus,and water holding capacity by up to 20%,70%,and 30%,respectively.Moreover,the addition of biochar in AAS had a marginal effect on the sulfate resistance of the stabilized sand,especially at high biochar content.However,the resistance of the AAS stabilized sand to wet-dry cycles slightly deteriorated with the addition of biochar.Based on these observations,a conceptual model showing biochar-AAS-sand interactions was proposed,in which biochar served as an internal curing agent,micro-reinforcer,and mechanically weak point.
基金funded by the Ministere de l’Economie,de la Science et de l’Innovation du Quebec,the Natural Sciences and Engineering Research Council of Canada(NSERC)the Consortium de recherche et innovations en bioprocedes industriels au Quebec(Cribiq)+1 种基金the Canada Research Chair Program,the College of Abitibi-Temiscaminguethe Industrial Waste Technology Centre(Centre Technologique des Residus Industriels)through its partner on this project,Airex Energy.
文摘Reconstituted wood panels have several advantages in terms of ease of manufacturing,but their shorter life span results in a huge amount of reconstituted wood panels being discarded in sorting centers yearly.Currently,the most common approach for dealing with this waste is incineration.In this study,reconstituted wood panels were converted into activated biochar through a two-step thermochemical process:(i)biochar production using pilot scale fast pyrolysis at 250 kg/h and 450℃;and(ii)a physical activation at three temperatures(750℃,850℃ and 950℃)using an in-house activation furnace(1 kg/h).Results showed that the first stage removed about 66% of the nitrogen from the wood panels in the form of NO,NH3,and trimethylamine,which were detected in small amounts compared to emitted CO_(2).Compared to other types of thermochemical conversion methods(e.g.,slow pyrolysis),isocyanic acid and hydrogen cyanide were not detected in this study.The second stage produced activated biochar with a specific surface area of up to 865 m^(2)/g at 950℃.The volatile gases generated during activation were predominantly composed of toluene and benzene.This two-step process resulted in nitrogen-rich carbon in the form of pyrrolic and pyridinic nitrogen.Activated biochars were then evaluated for their SO_(2) retention performance and showed an excellent adsorption capacity of up to 2140 mg/g compared to 65 mg/g for a commercial activated carbon(889 m^(2)/g).End-of-life reconstituted wood panels and SO_(2) gas are problematic issues in Canada where the economy largely revolves around forestry and mining industries.
基金funded by The Foundation for Research of Natural Resources in Finland(2016085)supported by the Academy of Finland(286685,294600,307222,277623)the FCoE of atmospheric sciences(Center of Excellence(1118615)).
文摘Boreal forests commonly suff er from nitrogen defi ciency due to low rate of nitrogen mineralization.Biochar may promote soil organic matter decomposition and accelerate nitrogen mineralization.In this study,Illumina NovaSeq sequencing combined with functional annotation of prokaryotic taxa(FAPROTAX)analysis was used to investigate the eff ect of biochar pyrolysis temperatures,the amount of applied biochar,and the period since the biochar application(2-and 3-year)on soil bacterial communities.The results show that biochar pyrolysis temperatures(500℃ and 650℃)and the amount of applied biochar(0.5 kg m^(−2)and 1.0 kg m^(−2))did not change soil properties.Nevertheless,the interaction of biochar pyrolysis temperature and the amount had signifi cant eff ects on bacterial species richness and evenness(P<0.05).The application of biochar produced at 500℃ had a lower abundance of Actinobacteria and Verrucomicrobia,while that produced at 650℃ had a higher abundance of Conexibacter and Phenylobacterium.When biochar produced at 650℃ was applied,applying 0.5 kg m^(−2)had a higher abundance of Cyanobacteria,Conexibacter,and Phenylobacterium than that of 1.0 kg m^(−2)(P<0.05).Functionally,the abundance of the aromatic compound degradation group increased with the extension of application time and increase of pyrolysis temperature.The time since application played an important role in the formation of soil bacterial communities and their functional structure.Long-term studies are necessary to understand the consequence of biochar on bacterial communities in boreal forests.
基金supported by the National Natural Science Foundation of China(No.U2004177)the Henan Province Science and Technology Research and Development Project in 2020,China(No.202300410491)the Key Scientific Research Projects of Provincial Universities in 2021,China(No.21A430045)。
文摘With the gradually increasing protection awareness about electromagnetic pollution,the demand for absorbing materials with renewability and environmental friendliness has attracted widespread attention.In this work,composites consisting of straw-derived biochar combined with NiCo alloy were successfully fabricated through high-temperature carbonization and subsequent hydrothermal reaction.The electromagnetic parameters of the porous biocarbon/NiCo composites can be effectively modified by altering their NiCo content,and their improved absorbing performance can be attributed to the synergy effect of magnetic-dielectric characteristics.An exceptional reflection loss of-27.0 dB at 2.2 mm thickness and an effective absorption bandwidth of 4.4 GHz(11.7-16.1 GHz)were achieved.These results revealed that the porous biocarbon/NiCo composites could be used as a new generation absorbing material because of their low density,light weight,excellent conductivity,and strong absorption.
文摘Among challenges implicit in the transition to the post-fossil fuel energetic model,the finite amount of resources available for the technological implementation of CO_(2) revalorizing processes arises as a central issue.The development of fully renewable catalytic systems with easier metal recovery strategies would promote the viability and sustainability of synthetic natural gas production circular routes.Taking Ni and NiFe catalysts supported over g-Al_(2)O_(3) oxide as reference materials,this work evaluates the potentiality of Ni and NiFe supported biochar catalysts for CO_(2) methanation.The development of competitive biochar catalysts was found dependent on the creation of basic sites on the catalyst surface.Displaying lower Turn Over Frequencies than Ni/Al catalyst,the absence of basic sites achieved over Ni/C catalyst was related to the depleted catalyst performances.For NiFe catalysts,analogous Ni_(5)Fe_(1) alloys were constituted over both alumina and biochar supports.The highest specific activity of the catalyst series,exhibited by the NiFe/C catalyst,was related to the development of surface basic sites along with weaker NiFe-C interactions,which resulted in increased Ni0:NiO surface populations under reaction conditions.In summary,the present work establishes biochar supports as a competitive material to consider within the future low-carbon energetic panorama.
基金financially supported by the Higher Education Department of Guangdong Province (No.2020KCXTD025)the National Key Research and Development Program of China (No.2017YFD0800404).
文摘In the rice-wheat rotation system,biochar(BC)can be applied at the initiation of the rice or wheat season.Here,we compared the effects of BC that were applied at two different crop seasons on wheat production,quality,and soil profile properties in a rice-wheat rotation system with nitrogen(N)fertilizer applied at 280 kg/ha rate.Results showed that both wheat grain production and N recovery use efficiency were influenced by BC applied at two crop seasons.Biochar application did not affect the total non-essential amino-acid,but when applied during wheat season,BC significantly(p<0.05)increased total essential amino acid in grain by 12.3%,particularly for the valine(+48.2%),methionine(+43.8%),and isoleucine(+10.3%).We found that BC significantly(p<0.05)decreased the pH of soil at 0–6 cm and 20–30 cm by 0.14–0.18 and 0.05–0.08 units,respectively.The NH4+-N content of the whole observed soil profile were reduced by BC application,however,the effect of BC on NO3–-N content varied with the application season and profile depth.Interestingly,BC applied at wheat and rice season significantly(p<0.05)improved topsoil N contents by 48.4%and 19.7%,respectively.In addition,data suggested that BC applied during wheat season performed better in enhancing soil available phosphorus,potassium,and organic matter contents.In conclusion,we suggest that the optimum application time of BC for enhancing crop production and quality(take amino-acid content for example)and improving soil fertility is at the initiation of the wheat season.
基金This study was supported by the Fundamental Research Funds for Zhejiang Provincial Universities and Research Institutes(No.2021J004)the Scientific Research Fund of Zhejiang Provincial Education Department(No.Y202044721).
文摘In this study,a novel absorpent(MSAR600℃)with a hydrophobic surface and hierarchical porous structure for the removal of kitchen oil was facilely fabricated from the macroalgae,laver(Porphyra haitanensis)by incorpor-ating high-temperature carbonization and alkyl polyglucosides(APG)and rhamnolipid(RL)surfactants modifi-cation.The characterization results showed MSAR600℃ possessed a louts-leaf-like papillae microstructure with high contact angle(137.5°),abundant porous structure with high specific surface area(23.4 m^(2)/g),and various oxygen-containing functional groups(-OH,C=O,C-O).Batch adsorption experiments were conducted to inves-tigate the effect of adsorption time,temperature,pH,and absorbent dose on kitchen oil adsorption performance.Then the practical application for the removal of kitchen oil using MSAR600℃ was also performed.The results showed that MSAR600℃ had a higher removal efficiency for kitchen oil(75.98%),compared with the commercial detergent(72.3%).This study demonstrates an example of fabricating a green tableware detergent for enhanced removal performance of kitchen oil.
基金Supported by Funding from Harbin Science and Technology Bureau(2017RAXXJ023)。
文摘A pot experiment was conducted to research the effect of biochar and wood vinegar on labile phosphorus fractions in saline-alkali soil.There were eight treatments,including CK(0 kg•hm-2 biochar+0 kg•hm-2 wood vinegar),C1(0.6 t•hm-2 biochar),C2(0.6 t•hm-2 wood vinegar),C3(1.2 t•hm-2 wood vinegar),C4(1.8 t•hm-2 wood vinegar),C5(0.6 t•hm-2 biochar+0.6 t•hm-2 wood vinegar),C6(0.6 t•hm-2 biochar+1.2 t•hm-2 wood vinegar),and C7(0.6 t•hm-2 biochar+1.8 t•hm-2 wood vinegar).The results showed that biochar without wood vinegar and the co-application of biochar and wood vinegar significantly increased soil total phosphorus content.Meanwhile,compared with CK,all of treatments increased resin phosphorus and sodium bicarbonate-extracted inorganic phosphorus(NaHCO3-Pi)contents in saline-alkali soil.Especially,the contents of resin phosphorus and NaHCO3-Pi under C5,C6,and C7 treatments were higher than those of C2,C3,and C4 treatments,respectively,indicating that the increases of labile phosphorus contents under the co-application of biochar and wood vinegar were better than those of the alone application of biochar and wood vinegar.Each treatment increased the proportion of labile phosphorus pool in saline-alkali soil and the proportion of labile phosphorus pool increased with the increase of the amount of wood vinegar.In addition,the application of biochar and wood vinegar increased the 100-grain weight of rice,and C6 treatment had the best effect,increasing the 100-grain weight by 134.35%.Therefore,the application of biochar and wood vinegar in saline-alkali soil could improve the soil phosphorus availability,increase the weight of rice grains,thereby realizing the resource utilization of agricultural waste and the sustainable development of agriculture.
文摘The chemical composition of biochar and the pyrolysis temperature, under which biochar was produced, determine its electrochemical properties. Electrical conductivity, pseudo-capacitance, and double layer capacitance are the three main electrochemical properties of biochar. Due to the electrical conductivity biochar is able to interfere with the electrons flow and play a dual role of an electron donor or an electron acceptor. The average conductivity of biochar is 229.20 S/m. Pseudocapacitance of biochar lets it serve as a hydrogen sink, taking up the hydrogen produced by protozoa and preventing it from participating in methane-producing reactions in the rumen environment. The average value of biochar’s pseudocapacitance is 228 F·g<sup>-1</sup>. Positive and negative charges get stored due to the absorption of ions onto the carbon surface, which happens because of the existence of double layer capacitance as one of biochar’s electrochemical properties. Biochar’s double layer capacitance values can reach the point of 110.8 F·g<sup>-1</sup>. The electrochemical properties of biochar are directly co-dependent with its redox potential and pH. Electrical conductivity, pseudocapacitance, and double layer capacitance can significantly influence biochemical processes in the rumen and, thus, need to be studied practically.
文摘[Objectives]To prepare biomanganese oxide/biochar composite(BMO-BC)and examine its remediation performance on arsenic contamination.[Methods]The BMO-BC was prepared by cultivating Pseudomonas putida MnB1 in the presence of Mn 2+and biochar.[Results]The initial concentration of Mn 2+in the culture system had no significant effect on the growth rate and domestication cycle of Pseudomonas putida MnB1.The results of SEM-EDS and XRD analysis confirm that the adsorbent prepared in this experiment was a composite of biomanganese oxide and biochar particles.The results of arsenic pollution removal test in simulated environment showed that the in-situ formed BMO-BC composite had certain removal effect on As(III)and the presence of biochar particles and manganese dioxide in the reaction system and the manganese oxidation ability of microbial strain MnB1 affect its remediation performance to As(III).[Conclusions]When the initial concentration is in the range of 0-10.0 mg/L,the isothermal adsorption data of BMO-BC on As(III)conforms to the Langmuir model.